! Started logfile: J0237-2623_S_2017_01_21_pus_uvs.log on Sun May 5 15:44:02 2019 obs J0237-2623_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0237-2623_S_2017_01_21_pus_uva.fits ! AN table 1: 95 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.941813 visibilities/baseline/integration-bin. ! Found source: J0237-2623 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 12884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0237-2623_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 274 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988412Jy sigma=0.006238 ! Fit after self-cal, rms=0.937179Jy sigma=0.005951 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.307 mas, bmaj=6.855 mas, bpa=-3.359 degrees ! Estimated noise=2057.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551209 Jy ! Component: 100 - total flux cleaned = 0.0671873 Jy ! Total flux subtracted in 100 components = 0.0671873 Jy ! Clean residual min=-0.005136 max=0.005525 Jy/beam ! Clean residual mean=0.000001 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.0671873 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0671873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114098Jy sigma=0.000647 ! Fit after self-cal, rms=0.113388Jy sigma=0.000643 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.618 mas, bpa=-1.5 degrees ! Estimated noise=1084.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192602 Jy ! Component: 100 - total flux cleaned = 0.00166735 Jy ! Component: 150 - total flux cleaned = 0.00154439 Jy ! Component: 200 - total flux cleaned = 0.00144059 Jy ! Total flux subtracted in 200 components = 0.00144059 Jy ! Clean residual min=-0.003225 max=0.003435 Jy/beam ! Clean residual mean=0.000002 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0686279 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.0686279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113301Jy sigma=0.000643 ! Fit after self-cal, rms=0.113297Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.02 LA 1.02 ! MK 1.04 NL 1.02 OV 0.97 PT 0.99 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.10 LA 1.04 ! MK 1.00 NL 1.09 OV 1.02 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.09 LA 1.06 ! MK 1.03 NL 1.11 OV 0.99 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.06 HN 0.84 LA 0.76 ! MK 0.87 NL 1.00* OV 0.93 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.113297Jy sigma=0.000643 ! Fit after self-cal, rms=0.110846Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.57 mas, bpa=-1.35 degrees ! Estimated noise=1077.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229933 Jy ! Component: 100 - total flux cleaned = -0.000414957 Jy ! Component: 150 - total flux cleaned = -0.000440249 Jy ! Component: 200 - total flux cleaned = -0.000463762 Jy ! Total flux subtracted in 200 components = -0.000463762 Jy ! Clean residual min=-0.002836 max=0.003040 Jy/beam ! Clean residual mean=0.000000 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0681642 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.0681642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110825Jy sigma=0.000641 ! Fit after self-cal, rms=0.110791Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110791Jy sigma=0.000641 ! Fit after self-cal, rms=0.111897Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.545 mas, bpa=-1.233 degrees ! Estimated noise=1078.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154056 Jy ! Component: 100 - total flux cleaned = -0.00030154 Jy ! Component: 150 - total flux cleaned = -0.000400183 Jy ! Component: 200 - total flux cleaned = -0.000452949 Jy ! Total flux subtracted in 200 components = -0.000452949 Jy ! Clean residual min=-0.002867 max=0.002983 Jy/beam ! Clean residual mean=0.000001 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0677112 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0677112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111881Jy sigma=0.000640 ! Fit after self-cal, rms=0.111940Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177716 Jy ! Component: 100 - total flux cleaned = -0.000241946 Jy ! Component: 150 - total flux cleaned = -0.000278341 Jy ! Component: 200 - total flux cleaned = -0.000293938 Jy ! Total flux subtracted in 200 components = -0.000293938 Jy ! Clean residual min=-0.002928 max=0.002870 Jy/beam ! Clean residual mean=0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0674173 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0674173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111927Jy sigma=0.000640 ! Fit after self-cal, rms=0.111931Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111931Jy sigma=0.000640 ! Fit after self-cal, rms=0.113344Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.539 mas, bpa=-1.17 degrees ! Estimated noise=1082.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.90859e-06 Jy ! Component: 100 - total flux cleaned = 1.88718e-05 Jy ! Component: 150 - total flux cleaned = -5.70492e-05 Jy ! Component: 200 - total flux cleaned = -0.000108306 Jy ! Total flux subtracted in 200 components = -0.000108306 Jy ! Clean residual min=-0.002900 max=0.002803 Jy/beam ! Clean residual mean=0.000001 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0673089 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0673089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113330Jy sigma=0.000640 ! Fit after self-cal, rms=0.113367Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.49597e-05 Jy ! Component: 100 - total flux cleaned = -7.34738e-05 Jy ! Component: 150 - total flux cleaned = -0.000103134 Jy ! Component: 200 - total flux cleaned = -0.000103462 Jy ! Total flux subtracted in 200 components = -0.000103462 Jy ! Clean residual min=-0.002903 max=0.002818 Jy/beam ! Clean residual mean=0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0672055 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0672055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113356Jy sigma=0.000640 ! Fit after self-cal, rms=0.113358Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113358Jy sigma=0.000640 ! Fit after self-cal, rms=0.114077Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.176 mas, bmaj=18.36 mas, bpa=7.708 degrees ! Estimated noise=1415.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256919 Jy ! Component: 100 - total flux cleaned = -0.000255745 Jy ! Component: 150 - total flux cleaned = -0.000233876 Jy ! Component: 200 - total flux cleaned = -0.000223998 Jy ! Total flux subtracted in 200 components = -0.000223998 Jy ! Clean residual min=-0.002926 max=0.002716 Jy/beam ! Clean residual mean=0.000002 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0669815 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.0669815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114072Jy sigma=0.000640 ! Fit after self-cal, rms=0.114077Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.01922e-05 Jy ! Component: 100 - total flux cleaned = -4.07522e-05 Jy ! Component: 150 - total flux cleaned = -1.87825e-05 Jy ! Component: 200 - total flux cleaned = -8.61984e-06 Jy ! Total flux subtracted in 200 components = -8.61984e-06 Jy ! Clean residual min=-0.002941 max=0.002792 Jy/beam ! Clean residual mean=0.000002 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.0669729 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0669729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114074Jy sigma=0.000640 ! Fit after self-cal, rms=0.114073Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=7.54 mas, bpa=-1.126 degrees ! Estimated noise=1085.69 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.915 x 7.54 at -1.126 degrees (North through East) ! Clean map min=-0.0027782 max=0.069695 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=6.776 mas, bpa=-3.076 degrees ! Estimated noise=2046.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561134 Jy ! Component: 100 - total flux cleaned = 0.0684392 Jy ! Component: 150 - total flux cleaned = 0.0691479 Jy ! Component: 200 - total flux cleaned = 0.068806 Jy ! Total flux subtracted in 200 components = 0.068806 Jy ! Clean residual min=-0.004040 max=0.004128 Jy/beam ! Clean residual mean=0.000003 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.068806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.068806 Jy ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=7.54 mas, bpa=-1.126 degrees ! Estimated noise=1085.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000996559 Jy ! Component: 100 - total flux cleaned = -0.00120848 Jy ! Component: 150 - total flux cleaned = -0.0013838 Jy ! Component: 200 - total flux cleaned = -0.00145492 Jy ! Total flux subtracted in 200 components = -0.00145492 Jy ! Clean residual min=-0.002874 max=0.002635 Jy/beam ! Clean residual mean=0.000002 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0673511 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.0673511 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.176 mas, bmaj=18.36 mas, bpa=7.708 degrees ! Estimated noise=1415.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000334913 Jy ! Component: 100 - total flux cleaned = -0.00033643 Jy ! Component: 150 - total flux cleaned = -0.000335967 Jy ! Component: 200 - total flux cleaned = -0.000336799 Jy ! Total flux subtracted in 200 components = -0.000336799 Jy ! Clean residual min=-0.003031 max=0.002796 Jy/beam ! Clean residual mean=0.000002 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0670143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.59799e-07 Jy ! Component: 100 - total flux cleaned = 3.61514e-07 Jy ! Component: 150 - total flux cleaned = 6.2171e-07 Jy ! Component: 200 - total flux cleaned = 9.60754e-06 Jy ! Total flux subtracted in 200 components = 9.60754e-06 Jy ! Clean residual min=-0.003005 max=0.002804 Jy/beam ! Clean residual mean=0.000002 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0670239 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0670239 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=7.54 mas, bpa=-1.126 degrees ! Estimated noise=1085.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.01207e-05 Jy ! Component: 100 - total flux cleaned = -2.19328e-06 Jy ! Component: 150 - total flux cleaned = -2.5634e-06 Jy ! Component: 200 - total flux cleaned = -2.2102e-06 Jy ! Total flux subtracted in 200 components = -2.2102e-06 Jy ! Clean residual min=-0.002864 max=0.002687 Jy/beam ! Clean residual mean=0.000001 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0670216 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0670217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114074Jy sigma=0.000640 ! Fit after self-cal, rms=0.114078Jy sigma=0.000640 wmodel J0237-2623_S_2017_01_21_pus_map.mod ! Writing 36 model components to file: J0237-2623_S_2017_01_21_pus_map.mod wobs J0237-2623_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0237-2623_S_2017_01_21_pus_uvs.fits wwins J0237-2623_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0237-2623_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515777 Jy ! Component: 100 - total flux cleaned = -0.000829135 Jy ! Component: 150 - total flux cleaned = -0.00129326 Jy ! Component: 200 - total flux cleaned = -0.00165436 Jy ! Component: 250 - total flux cleaned = -0.00196403 Jy ! Component: 300 - total flux cleaned = -0.00218912 Jy ! Component: 350 - total flux cleaned = -0.00237192 Jy ! Component: 400 - total flux cleaned = -0.00251428 Jy ! Component: 450 - total flux cleaned = -0.00261863 Jy ! Component: 500 - total flux cleaned = -0.00275408 Jy ! Component: 550 - total flux cleaned = -0.00282001 Jy ! Component: 600 - total flux cleaned = -0.00278759 Jy ! Component: 650 - total flux cleaned = -0.00281985 Jy ! Component: 700 - total flux cleaned = -0.00278832 Jy ! Component: 750 - total flux cleaned = -0.00269565 Jy ! Component: 800 - total flux cleaned = -0.00263528 Jy ! Component: 850 - total flux cleaned = -0.00266546 Jy ! Component: 900 - total flux cleaned = -0.00266515 Jy ! Component: 950 - total flux cleaned = -0.00266483 Jy ! Component: 1000 - total flux cleaned = -0.00260812 Jy ! Component: 1050 - total flux cleaned = -0.00269244 Jy ! Component: 1100 - total flux cleaned = -0.00258203 Jy ! Component: 1150 - total flux cleaned = -0.00271865 Jy ! Component: 1200 - total flux cleaned = -0.00274536 Jy ! Component: 1250 - total flux cleaned = -0.00279817 Jy ! Component: 1300 - total flux cleaned = -0.00274589 Jy ! Component: 1350 - total flux cleaned = -0.00274613 Jy ! Component: 1400 - total flux cleaned = -0.00274582 Jy ! Component: 1450 - total flux cleaned = -0.00269585 Jy ! Component: 1500 - total flux cleaned = -0.00272059 Jy ! Component: 1550 - total flux cleaned = -0.00272069 Jy ! Component: 1600 - total flux cleaned = -0.00267177 Jy ! Component: 1650 - total flux cleaned = -0.00267196 Jy ! Component: 1700 - total flux cleaned = -0.00262486 Jy ! Component: 1750 - total flux cleaned = -0.00264911 Jy ! Component: 1800 - total flux cleaned = -0.00278796 Jy ! Component: 1850 - total flux cleaned = -0.00278808 Jy ! Component: 1900 - total flux cleaned = -0.00285575 Jy ! Component: 1950 - total flux cleaned = -0.00285557 Jy ! Component: 2000 - total flux cleaned = -0.00289992 Jy ! Component: 2050 - total flux cleaned = -0.00292139 Jy ! Component: 2100 - total flux cleaned = -0.00296478 Jy ! Component: 2150 - total flux cleaned = -0.00300785 Jy ! Component: 2200 - total flux cleaned = -0.003029 Jy ! Component: 2250 - total flux cleaned = -0.00307112 Jy ! Component: 2300 - total flux cleaned = -0.00300822 Jy ! Component: 2350 - total flux cleaned = -0.00294602 Jy ! Component: 2400 - total flux cleaned = -0.00298733 Jy ! Component: 2450 - total flux cleaned = -0.00306886 Jy ! Component: 2500 - total flux cleaned = -0.00304862 Jy ! Component: 2550 - total flux cleaned = -0.00310847 Jy ! Component: 2600 - total flux cleaned = -0.00314807 Jy ! Component: 2650 - total flux cleaned = -0.00326637 Jy ! Component: 2700 - total flux cleaned = -0.00328585 Jy ! Component: 2750 - total flux cleaned = -0.00336371 Jy ! Component: 2800 - total flux cleaned = -0.00347915 Jy ! Component: 2850 - total flux cleaned = -0.00349843 Jy ! Component: 2900 - total flux cleaned = -0.00364992 Jy ! Component: 2950 - total flux cleaned = -0.00370612 Jy ! Component: 3000 - total flux cleaned = -0.0037807 Jy ! Component: 3050 - total flux cleaned = -0.0038919 Jy ! Component: 3100 - total flux cleaned = -0.00398381 Jy ! Component: 3150 - total flux cleaned = -0.00407514 Jy ! Component: 3200 - total flux cleaned = -0.00418367 Jy ! Component: 3250 - total flux cleaned = -0.0042913 Jy ! Component: 3300 - total flux cleaned = -0.00436263 Jy ! Component: 3350 - total flux cleaned = -0.0044512 Jy ! Component: 3400 - total flux cleaned = -0.00459181 Jy ! Component: 3450 - total flux cleaned = -0.00466172 Jy ! Component: 3500 - total flux cleaned = -0.00481781 Jy ! Component: 3550 - total flux cleaned = -0.00490368 Jy ! Component: 3600 - total flux cleaned = -0.00497197 Jy ! Component: 3650 - total flux cleaned = -0.00505686 Jy ! Component: 3700 - total flux cleaned = -0.00515799 Jy ! Component: 3750 - total flux cleaned = -0.00517448 Jy ! Component: 3800 - total flux cleaned = -0.0052412 Jy ! Component: 3850 - total flux cleaned = -0.00532386 Jy ! Component: 3900 - total flux cleaned = -0.00540603 Jy ! Component: 3950 - total flux cleaned = -0.00547104 Jy ! Component: 4000 - total flux cleaned = -0.00556819 Jy ! Component: 4050 - total flux cleaned = -0.00553601 Jy ! Total flux subtracted in 4096 components = -0.00561615 Jy ! Clean residual min=-0.001173 max=0.000874 Jy/beam ! Clean residual mean=-0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.0614055 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 308 components and 0.0614056 Jy ![Exited script file: muppet] wmap "J0237-2623_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.915 x 7.54 at -1.126 degrees (North through East) ! Clean map min=-0.0020868 max=0.069411 Jy/beam ! Writing clean map to FITS file: J0237-2623_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0694111 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283474 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22519 1.22519 2.45039 4.90078 9.80155 19.6031 39.2062 78.4124 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.915 x 7.54 at -1.126 degrees (North through East) ! Clean map min=-0.0020868 max=0.069411 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0237-2623_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:44:07 2019