! Started logfile: J0237+2848_X_2017_06_15_pus_uvs.log on Tue May  7 19:51:24 2019
obs J0237+2848_X_2017_06_15_pus_uva.fits
! Reading UV FITS file: J0237+2848_X_2017_06_15_pus_uva.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.76 visibilities/baseline/integration-bin.
! Found source: J0237+2848
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 989 lines of history.
! 
! Reading 6156 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0237+2848_X_2017_06_15_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.149177Jy  sigma=0.010421
! Fit after  self-cal, rms=1.136238Jy  sigma=0.010325
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.7315 mas, bmaj=1.66 mas, bpa=9.575 degrees
! Estimated noise=1466.59 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.55052 Jy
! Component: 100  -  total flux cleaned = 1.92744 Jy
! Total flux subtracted in 100 components = 1.92744 Jy
! Clean residual min=-0.087708 max=0.224858 Jy/beam
! Clean residual mean=0.000210 rms=0.026820 Jy/beam
! Combined flux in latest and established models = 1.92744 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.92744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.439331Jy  sigma=0.004025
! Fit after  self-cal, rms=0.438688Jy  sigma=0.004017
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Added new window around map position (-1, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.22192 Jy
! Component: 100  -  total flux cleaned = 0.358623 Jy
! Total flux subtracted in 100 components = 0.358623 Jy
! Clean residual min=-0.064251 max=0.076057 Jy/beam
! Clean residual mean=0.000088 rms=0.015843 Jy/beam
! Combined flux in latest and established models = 2.28607 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 2.28607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.267227Jy  sigma=0.002421
! Fit after  self-cal, rms=0.258227Jy  sigma=0.002360
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107043 Jy
! Component: 100  -  total flux cleaned = 0.179578 Jy
! Total flux subtracted in 100 components = 0.179578 Jy
! Clean residual min=-0.045595 max=0.049229 Jy/beam
! Clean residual mean=0.000045 rms=0.010600 Jy/beam
! Combined flux in latest and established models = 2.46564 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 43 components and 2.46564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.188918Jy  sigma=0.001696
! Fit after  self-cal, rms=0.184365Jy  sigma=0.001666
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8974 mas, bmaj=1.889 mas, bpa=12.69 degrees
! Estimated noise=1034.44 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0852445 Jy
! Component: 100  -  total flux cleaned = 0.140921 Jy
! Component: 150  -  total flux cleaned = 0.180181 Jy
! Component: 200  -  total flux cleaned = 0.208648 Jy
! Total flux subtracted in 200 components = 0.208648 Jy
! Clean residual min=-0.030669 max=0.028211 Jy/beam
! Clean residual mean=-0.000071 rms=0.007674 Jy/beam
! Combined flux in latest and established models = 2.67429 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 64 components and 2.67429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.134876Jy  sigma=0.001171
! Fit after  self-cal, rms=0.131143Jy  sigma=0.001143
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.07     
!   LA        0.96     MK        1.02     NL        0.96     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.96     MK        1.02     NL        0.95     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        1.03     
!   LA        0.98     MK        1.04     NL        0.96     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.02     
!   LA        0.99     MK        1.04     NL        0.96     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.98     KP        1.03     
!   LA        0.98     MK        1.05     NL        0.96     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.01     KP        1.03     
!   LA        0.98     MK        1.03     NL        0.95     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.03     
!   LA        0.99     MK        1.05     NL        0.95     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.00     KP        1.02     
!   LA        0.97     MK        1.03     NL        0.95     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.01     NL        0.96     OV        1.01     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.05     KP        1.03     
!   LA        1.00     MK        1.03     NL        0.95     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        1.02     
!   LA        1.00     MK        1.03     NL        0.96     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.03     
!   LA        0.97     MK        1.02     NL        0.95     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.131143Jy  sigma=0.001143
! Fit after  self-cal, rms=0.107421Jy  sigma=0.000919
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9036 mas, bmaj=1.898 mas, bpa=12.76 degrees
! Estimated noise=1029.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252193 Jy
! Component: 100  -  total flux cleaned = 0.0370098 Jy
! Component: 150  -  total flux cleaned = 0.0455827 Jy
! Component: 200  -  total flux cleaned = 0.0497406 Jy
! Total flux subtracted in 200 components = 0.0497406 Jy
! Clean residual min=-0.016322 max=0.014758 Jy/beam
! Clean residual mean=0.000070 rms=0.003970 Jy/beam
! Combined flux in latest and established models = 2.72403 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 88 components and 2.72403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097748Jy  sigma=0.000832
! Fit after  self-cal, rms=0.096704Jy  sigma=0.000824
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096704Jy  sigma=0.000824
! Fit after  self-cal, rms=0.090189Jy  sigma=0.000762
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9032 mas, bmaj=1.894 mas, bpa=12.62 degrees
! Estimated noise=1028.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102465 Jy
! Component: 100  -  total flux cleaned = 0.0165343 Jy
! Component: 150  -  total flux cleaned = 0.0195957 Jy
! Component: 200  -  total flux cleaned = 0.0219358 Jy
! Total flux subtracted in 200 components = 0.0219358 Jy
! Clean residual min=-0.012587 max=0.010720 Jy/beam
! Clean residual mean=0.000010 rms=0.002726 Jy/beam
! Combined flux in latest and established models = 2.74597 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 2.74597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086768Jy  sigma=0.000731
! Fit after  self-cal, rms=0.086218Jy  sigma=0.000728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204244 Jy
! Component: 100  -  total flux cleaned = 0.00386366 Jy
! Component: 150  -  total flux cleaned = 0.00521486 Jy
! Component: 200  -  total flux cleaned = 0.00620348 Jy
! Total flux subtracted in 200 components = 0.00620348 Jy
! Clean residual min=-0.011625 max=0.010265 Jy/beam
! Clean residual mean=0.000016 rms=0.002524 Jy/beam
! Combined flux in latest and established models = 2.75217 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 2.75217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084839Jy  sigma=0.000716
! Fit after  self-cal, rms=0.084547Jy  sigma=0.000714
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084547Jy  sigma=0.000714
! Fit after  self-cal, rms=0.084188Jy  sigma=0.000710
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9034 mas, bmaj=1.894 mas, bpa=12.55 degrees
! Estimated noise=1028.72 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372747 Jy
! Component: 100  -  total flux cleaned = 0.00689564 Jy
! Component: 150  -  total flux cleaned = 0.00856512 Jy
! Component: 200  -  total flux cleaned = 0.00969603 Jy
! Total flux subtracted in 200 components = 0.00969603 Jy
! Clean residual min=-0.010135 max=0.009778 Jy/beam
! Clean residual mean=0.000004 rms=0.002285 Jy/beam
! Combined flux in latest and established models = 2.76187 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 123 components and 2.76187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083113Jy  sigma=0.000701
! Fit after  self-cal, rms=0.082863Jy  sigma=0.000700
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 14.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104797 Jy
! Component: 100  -  total flux cleaned = 0.0166527 Jy
! Component: 150  -  total flux cleaned = 0.0211232 Jy
! Component: 200  -  total flux cleaned = 0.0236264 Jy
! Total flux subtracted in 200 components = 0.0236264 Jy
! Clean residual min=-0.008961 max=0.006637 Jy/beam
! Clean residual mean=0.000025 rms=0.001899 Jy/beam
! Combined flux in latest and established models = 2.78549 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 135 components and 2.78549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081123Jy  sigma=0.000683
! Fit after  self-cal, rms=0.080979Jy  sigma=0.000682
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080979Jy  sigma=0.000682
! Fit after  self-cal, rms=0.080857Jy  sigma=0.000681
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=2.049 mas, bmaj=2.838 mas, bpa=8.114 degrees
! Estimated noise=1285.33 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423157 Jy
! Component: 100  -  total flux cleaned = 0.00834117 Jy
! Component: 150  -  total flux cleaned = 0.0116157 Jy
! Component: 200  -  total flux cleaned = 0.0144117 Jy
! Total flux subtracted in 200 components = 0.0144117 Jy
! Clean residual min=-0.007788 max=0.006915 Jy/beam
! Clean residual mean=0.000052 rms=0.002089 Jy/beam
! Combined flux in latest and established models = 2.79991 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 164 components and 2.79991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080301Jy  sigma=0.000676
! Fit after  self-cal, rms=0.080083Jy  sigma=0.000675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142265 Jy
! Component: 100  -  total flux cleaned = 0.0041155 Jy
! Component: 150  -  total flux cleaned = 0.00631285 Jy
! Component: 200  -  total flux cleaned = 0.00821936 Jy
! Total flux subtracted in 200 components = 0.00821936 Jy
! Clean residual min=-0.007330 max=0.006440 Jy/beam
! Clean residual mean=0.000064 rms=0.001922 Jy/beam
! Combined flux in latest and established models = 2.80812 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 180 components and 2.80812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079883Jy  sigma=0.000673
! Fit after  self-cal, rms=0.079740Jy  sigma=0.000672
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9033 mas, bmaj=1.893 mas, bpa=12.5 degrees
! Estimated noise=1028.68 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9033 x 1.893 at 12.5 degrees (North through East)
! Clean map  min=-0.0061575  max=1.9865 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079740Jy  sigma=0.000672
! Fit after  self-cal, rms=0.075072Jy  sigma=0.000630
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9031 mas, bmaj=1.892 mas, bpa=12.48 degrees
! Estimated noise=1028.69 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111328 Jy
! Component: 100  -  total flux cleaned = 0.000946503 Jy
! Component: 150  -  total flux cleaned = 0.00168582 Jy
! Component: 200  -  total flux cleaned = 0.00236336 Jy
! Total flux subtracted in 200 components = 0.00236336 Jy
! Clean residual min=-0.006738 max=0.005814 Jy/beam
! Clean residual mean=0.000017 rms=0.001496 Jy/beam
! Combined flux in latest and established models = 2.81049 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 195 components and 2.81049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074563Jy  sigma=0.000626
! Fit after  self-cal, rms=0.074480Jy  sigma=0.000625
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227737 Jy
! Component: 100  -  total flux cleaned = 0.00108876 Jy
! Component: 150  -  total flux cleaned = 0.00178665 Jy
! Component: 200  -  total flux cleaned = 0.00263498 Jy
! Total flux subtracted in 200 components = 0.00263498 Jy
! Clean residual min=-0.006276 max=0.005754 Jy/beam
! Clean residual mean=0.000019 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 2.81312 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 202 components and 2.81312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074188Jy  sigma=0.000623
! Fit after  self-cal, rms=0.074141Jy  sigma=0.000623
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074141Jy  sigma=0.000623
! Fit after  self-cal, rms=0.074100Jy  sigma=0.000622
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.7357 mas, bmaj=1.662 mas, bpa=9.313 degrees
! Estimated noise=1459.23 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.54079 Jy
! Component: 100  -  total flux cleaned = 1.93497 Jy
! Component: 150  -  total flux cleaned = 2.15175 Jy
! Component: 200  -  total flux cleaned = 2.29138 Jy
! Total flux subtracted in 200 components = 2.29138 Jy
! Clean residual min=-0.035861 max=0.076108 Jy/beam
! Clean residual mean=0.000093 rms=0.011954 Jy/beam
! Combined flux in latest and established models = 2.29138 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 2.29138 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9031 mas, bmaj=1.892 mas, bpa=12.45 degrees
! Estimated noise=1028.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135319 Jy
! Component: 100  -  total flux cleaned = 0.222151 Jy
! Component: 150  -  total flux cleaned = 0.282283 Jy
! Component: 200  -  total flux cleaned = 0.325033 Jy
! Total flux subtracted in 200 components = 0.325033 Jy
! Clean residual min=-0.014307 max=0.024261 Jy/beam
! Clean residual mean=-0.000096 rms=0.005395 Jy/beam
! Combined flux in latest and established models = 2.61641 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 75 components and 2.61641 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0315496 Jy
! Component: 100  -  total flux cleaned = 0.0553455 Jy
! Component: 150  -  total flux cleaned = 0.0737495 Jy
! Component: 200  -  total flux cleaned = 0.0887349 Jy
! Total flux subtracted in 200 components = 0.0887349 Jy
! Clean residual min=-0.008859 max=0.013599 Jy/beam
! Clean residual mean=-0.000051 rms=0.002931 Jy/beam
! Combined flux in latest and established models = 2.70515 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 113 components and 2.70515 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Added new window around map position (-4, 14.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144433 Jy
! Component: 100  -  total flux cleaned = 0.0252524 Jy
! Component: 150  -  total flux cleaned = 0.0345106 Jy
! Component: 200  -  total flux cleaned = 0.0426107 Jy
! Total flux subtracted in 200 components = 0.0426107 Jy
! Clean residual min=-0.007169 max=0.008850 Jy/beam
! Clean residual mean=-0.000032 rms=0.002021 Jy/beam
! Combined flux in latest and established models = 2.74776 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 152 components and 2.74776 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Added new window around map position (4.6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00875207 Jy
! Component: 100  -  total flux cleaned = 0.0154496 Jy
! Component: 150  -  total flux cleaned = 0.0213599 Jy
! Component: 200  -  total flux cleaned = 0.0266258 Jy
! Total flux subtracted in 200 components = 0.0266258 Jy
! Clean residual min=-0.006083 max=0.005817 Jy/beam
! Clean residual mean=-0.000013 rms=0.001578 Jy/beam
! Combined flux in latest and established models = 2.77438 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 178 components and 2.77438 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=2.049 mas, bmaj=2.837 mas, bpa=8.05 degrees
! Estimated noise=1286.26 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076477 Jy
! Component: 100  -  total flux cleaned = 0.0134505 Jy
! Component: 150  -  total flux cleaned = 0.0180813 Jy
! Component: 200  -  total flux cleaned = 0.0218414 Jy
! Total flux subtracted in 200 components = 0.0218414 Jy
! Clean residual min=-0.006260 max=0.005815 Jy/beam
! Clean residual mean=-0.000001 rms=0.001921 Jy/beam
! Combined flux in latest and established models = 2.79622 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308078 Jy
! Component: 100  -  total flux cleaned = 0.00505903 Jy
! Component: 150  -  total flux cleaned = 0.00598741 Jy
! Component: 200  -  total flux cleaned = 0.00692745 Jy
! Total flux subtracted in 200 components = 0.00692745 Jy
! Clean residual min=-0.005743 max=0.005846 Jy/beam
! Clean residual mean=0.000009 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 2.80315 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 243 components and 2.80315 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.9031 mas, bmaj=1.892 mas, bpa=12.45 degrees
! Estimated noise=1028.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00319 Jy
! Component: 100  -  total flux cleaned = -0.00291097 Jy
! Component: 150  -  total flux cleaned = -0.00204595 Jy
! Component: 200  -  total flux cleaned = -0.00112767 Jy
! Total flux subtracted in 200 components = -0.00112767 Jy
! Clean residual min=-0.005121 max=0.004677 Jy/beam
! Clean residual mean=0.000002 rms=0.001242 Jy/beam
! Combined flux in latest and established models = 2.80202 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 262 components and 2.80202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073377Jy  sigma=0.000616
! Fit after  self-cal, rms=0.073082Jy  sigma=0.000613
wmodel J0237+2848_X_2017_06_15_pus_map.mod
! Writing 262 model components to file: J0237+2848_X_2017_06_15_pus_map.mod
wobs J0237+2848_X_2017_06_15_pus_uvs.fits
! Writing UV FITS file: J0237+2848_X_2017_06_15_pus_uvs.fits
wwins J0237+2848_X_2017_06_15_pus_map.win
! wwins: Wrote 6 windows to J0237+2848_X_2017_06_15_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120727 Jy
! Component: 100  -  total flux cleaned = -0.00144968 Jy
! Component: 150  -  total flux cleaned = -0.00167653 Jy
! Component: 200  -  total flux cleaned = -0.00210788 Jy
! Component: 250  -  total flux cleaned = -0.00258451 Jy
! Component: 300  -  total flux cleaned = -0.00297507 Jy
! Component: 350  -  total flux cleaned = -0.00316218 Jy
! Component: 400  -  total flux cleaned = -0.0035256 Jy
! Component: 450  -  total flux cleaned = -0.00381793 Jy
! Component: 500  -  total flux cleaned = -0.00410303 Jy
! Component: 550  -  total flux cleaned = -0.00421456 Jy
! Component: 600  -  total flux cleaned = -0.00437675 Jy
! Component: 650  -  total flux cleaned = -0.00432376 Jy
! Component: 700  -  total flux cleaned = -0.00447844 Jy
! Component: 750  -  total flux cleaned = -0.0045277 Jy
! Component: 800  -  total flux cleaned = -0.00442845 Jy
! Component: 850  -  total flux cleaned = -0.00457187 Jy
! Component: 900  -  total flux cleaned = -0.00457169 Jy
! Component: 950  -  total flux cleaned = -0.00475507 Jy
! Component: 1000  -  total flux cleaned = -0.00493488 Jy
! Component: 1050  -  total flux cleaned = -0.005068 Jy
! Component: 1100  -  total flux cleaned = -0.00519968 Jy
! Component: 1150  -  total flux cleaned = -0.00537282 Jy
! Component: 1200  -  total flux cleaned = -0.00562614 Jy
! Component: 1250  -  total flux cleaned = -0.00583414 Jy
! Component: 1300  -  total flux cleaned = -0.00607783 Jy
! Component: 1350  -  total flux cleaned = -0.00623692 Jy
! Component: 1400  -  total flux cleaned = -0.00631521 Jy
! Component: 1450  -  total flux cleaned = -0.00643157 Jy
! Component: 1500  -  total flux cleaned = -0.00650802 Jy
! Component: 1550  -  total flux cleaned = -0.00665741 Jy
! Component: 1600  -  total flux cleaned = -0.00680484 Jy
! Component: 1650  -  total flux cleaned = -0.00694928 Jy
! Component: 1700  -  total flux cleaned = -0.00701999 Jy
! Component: 1750  -  total flux cleaned = -0.00705499 Jy
! Component: 1800  -  total flux cleaned = -0.00715921 Jy
! Component: 1850  -  total flux cleaned = -0.00715909 Jy
! Component: 1900  -  total flux cleaned = -0.00722605 Jy
! Component: 1950  -  total flux cleaned = -0.00722658 Jy
! Component: 2000  -  total flux cleaned = -0.00732466 Jy
! Total flux subtracted in 2048 components = -0.00729248 Jy
! Clean residual min=-0.001719 max=0.001747 Jy/beam
! Clean residual mean=0.000002 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 2.79473 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 394 components and 2.79473 Jy
![Exited script file: muppet]
wmap "J0237+2848_X_2017_06_15_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9031 x 1.892 at 12.45 degrees (North through East)
! Clean map  min=-0.0033569  max=1.9839 Jy/beam
! Writing clean map to FITS file: J0237+2848_X_2017_06_15_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.9839 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.195% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000588396 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0889755 0.0889755 0.177951 0.355902 0.711804 1.42361 2.84722 5.69444 11.3889 22.7777 45.5555 91.111
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.983 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9031 x 1.892 at 12.45 degrees (North through East)
! Clean map  min=-0.0033569  max=1.9839 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0237+2848_X_2017_06_15_pus_uvs.log closed on Tue May  7 19:51:26 2019