! Started logfile: J0236-2953_S_2017_10_21_pus_uvs.log on Sat May 11 20:48:43 2019 obs J0236-2953_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_10_21_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.524573 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.836941Jy sigma=0.005935 ! Fit after self-cal, rms=0.812533Jy sigma=0.005818 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=21.44 mas, bpa=-9.986 degrees ! Estimated noise=3149.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152701 Jy ! Component: 100 - total flux cleaned = 0.199359 Jy ! Total flux subtracted in 100 components = 0.199359 Jy ! Clean residual min=-0.014714 max=0.022725 Jy/beam ! Clean residual mean=-0.000114 rms=0.005087 Jy/beam ! Combined flux in latest and established models = 0.199359 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.199359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123753Jy sigma=0.000790 ! Fit after self-cal, rms=0.123786Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=23.34 mas, bpa=-9.997 degrees ! Estimated noise=2493.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249152 Jy ! Component: 100 - total flux cleaned = 0.0381536 Jy ! Component: 150 - total flux cleaned = 0.0462893 Jy ! Component: 200 - total flux cleaned = 0.0513703 Jy ! Total flux subtracted in 200 components = 0.0513703 Jy ! Clean residual min=-0.012071 max=0.012601 Jy/beam ! Clean residual mean=-0.000046 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 0.250729 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 55 components and 0.250729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119159Jy sigma=0.000745 ! Fit after self-cal, rms=0.119139Jy sigma=0.000745 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.22 KP 1.07 ! LA 1.05 MK 1.04 NL 0.90 OV 0.86 ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.29 KP 1.07 ! LA 1.01 MK 0.96 NL 1.06 OV 0.96 ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.36 KP 1.11 ! LA 0.77 MK 1.05 NL 1.29 OV 0.79 ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.87 KP 1.00* ! LA 2.17 MK 1.16 NL 1.00* OV 1.00* ! PT 0.89 ! ! ! Fit before self-cal, rms=0.119139Jy sigma=0.000745 ! Fit after self-cal, rms=0.143511Jy sigma=0.000699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=23.63 mas, bpa=-10.47 degrees ! Estimated noise=2563.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0029433 Jy ! Component: 100 - total flux cleaned = -0.00388047 Jy ! Component: 150 - total flux cleaned = -0.00435027 Jy ! Component: 200 - total flux cleaned = -0.00448191 Jy ! Total flux subtracted in 200 components = -0.00448191 Jy ! Clean residual min=-0.008373 max=0.008248 Jy/beam ! Clean residual mean=-0.000043 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 0.246247 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.246247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142868Jy sigma=0.000697 ! Fit after self-cal, rms=0.143880Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143880Jy sigma=0.000695 ! Fit after self-cal, rms=0.155116Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=24.2 mas, bpa=-10.74 degrees ! Estimated noise=2587.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237753 Jy ! Component: 100 - total flux cleaned = -0.00288255 Jy ! Component: 150 - total flux cleaned = -0.00341618 Jy ! Component: 200 - total flux cleaned = -0.00377977 Jy ! Total flux subtracted in 200 components = -0.00377977 Jy ! Clean residual min=-0.007508 max=0.006583 Jy/beam ! Clean residual mean=-0.000034 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.242467 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.242467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154906Jy sigma=0.000687 ! Fit after self-cal, rms=0.155090Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058586 Jy ! Component: 100 - total flux cleaned = -0.000971422 Jy ! Component: 150 - total flux cleaned = -0.00124647 Jy ! Component: 200 - total flux cleaned = -0.00149556 Jy ! Total flux subtracted in 200 components = -0.00149556 Jy ! Clean residual min=-0.007375 max=0.006513 Jy/beam ! Clean residual mean=-0.000041 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 0.240972 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.240972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155001Jy sigma=0.000686 ! Fit after self-cal, rms=0.154965Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154965Jy sigma=0.000686 ! Fit after self-cal, rms=0.167089Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=24.56 mas, bpa=-10.88 degrees ! Estimated noise=2592.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158686 Jy ! Component: 100 - total flux cleaned = -0.00179039 Jy ! Component: 150 - total flux cleaned = -0.00203335 Jy ! Component: 200 - total flux cleaned = -0.00225936 Jy ! Total flux subtracted in 200 components = -0.00225936 Jy ! Clean residual min=-0.006422 max=0.006410 Jy/beam ! Clean residual mean=-0.000025 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.238713 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 98 components and 0.238713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167008Jy sigma=0.000684 ! Fit after self-cal, rms=0.167098Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225714 Jy ! Component: 100 - total flux cleaned = -0.000378748 Jy ! Component: 150 - total flux cleaned = -0.000568978 Jy ! Component: 200 - total flux cleaned = -0.00070276 Jy ! Total flux subtracted in 200 components = -0.00070276 Jy ! Clean residual min=-0.006361 max=0.006322 Jy/beam ! Clean residual mean=-0.000028 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.23801 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 101 components and 0.23801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167051Jy sigma=0.000684 ! Fit after self-cal, rms=0.167019Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167019Jy sigma=0.000684 ! Fit after self-cal, rms=0.169589Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.671 mas, bmaj=36.26 mas, bpa=-0.5187 degrees ! Estimated noise=2804.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114726 Jy ! Component: 100 - total flux cleaned = -0.00114569 Jy ! Component: 150 - total flux cleaned = -0.00114386 Jy ! Component: 200 - total flux cleaned = -0.00114201 Jy ! Total flux subtracted in 200 components = -0.00114201 Jy ! Clean residual min=-0.006484 max=0.005356 Jy/beam ! Clean residual mean=-0.000033 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 0.236868 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 107 components and 0.236868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169590Jy sigma=0.000683 ! Fit after self-cal, rms=0.169635Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14861e-05 Jy ! Component: 100 - total flux cleaned = 1.16122e-05 Jy ! Component: 150 - total flux cleaned = 1.29049e-05 Jy ! Component: 200 - total flux cleaned = 1.32651e-05 Jy ! Total flux subtracted in 200 components = 1.32651e-05 Jy ! Clean residual min=-0.006502 max=0.005216 Jy/beam ! Clean residual mean=-0.000034 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.236881 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 108 components and 0.236881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169635Jy sigma=0.000683 ! Fit after self-cal, rms=0.169635Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=24.66 mas, bpa=-10.92 degrees ! Estimated noise=2589.41 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.842 x 24.66 at -10.92 degrees (North through East) ! Clean map min=-0.0070172 max=0.20303 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=22.97 mas, bpa=-11.05 degrees ! Estimated noise=3382.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16245 Jy ! Component: 100 - total flux cleaned = 0.201765 Jy ! Component: 150 - total flux cleaned = 0.217211 Jy ! Component: 200 - total flux cleaned = 0.225754 Jy ! Total flux subtracted in 200 components = 0.225754 Jy ! Clean residual min=-0.008491 max=0.007303 Jy/beam ! Clean residual mean=-0.000032 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.225754 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.225754 Jy ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=24.66 mas, bpa=-10.92 degrees ! Estimated noise=2589.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638052 Jy ! Component: 100 - total flux cleaned = 0.00772101 Jy ! Component: 150 - total flux cleaned = 0.0088172 Jy ! Component: 200 - total flux cleaned = 0.00960764 Jy ! Total flux subtracted in 200 components = 0.00960764 Jy ! Clean residual min=-0.006861 max=0.006138 Jy/beam ! Clean residual mean=-0.000029 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.235362 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 0.235362 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.671 mas, bmaj=36.26 mas, bpa=-0.5187 degrees ! Estimated noise=2804.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179348 Jy ! Component: 100 - total flux cleaned = 0.00197857 Jy ! Component: 150 - total flux cleaned = 0.00197643 Jy ! Component: 200 - total flux cleaned = 0.00197671 Jy ! Total flux subtracted in 200 components = 0.00197671 Jy ! Clean residual min=-0.006623 max=0.004963 Jy/beam ! Clean residual mean=-0.000032 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.237338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66063e-05 Jy ! Component: 100 - total flux cleaned = 8.82386e-05 Jy ! Component: 150 - total flux cleaned = 8.90556e-05 Jy ! Component: 200 - total flux cleaned = 0.000126817 Jy ! Total flux subtracted in 200 components = 0.000126817 Jy ! Clean residual min=-0.006578 max=0.005004 Jy/beam ! Clean residual mean=-0.000031 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.237465 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.237465 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=24.66 mas, bpa=-10.92 degrees ! Estimated noise=2589.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000296967 Jy ! Component: 100 - total flux cleaned = -0.000541086 Jy ! Component: 150 - total flux cleaned = -0.000694102 Jy ! Component: 200 - total flux cleaned = -0.000764257 Jy ! Total flux subtracted in 200 components = -0.000764257 Jy ! Clean residual min=-0.006583 max=0.006433 Jy/beam ! Clean residual mean=-0.000023 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.236701 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.236701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169994Jy sigma=0.000684 ! Fit after self-cal, rms=0.169811Jy sigma=0.000683 wmodel J0236-2953_S_2017_10_21_pus_map.mod ! Writing 95 model components to file: J0236-2953_S_2017_10_21_pus_map.mod wobs J0236-2953_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_10_21_pus_uvs.fits wwins J0236-2953_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0236-2953_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158271 Jy ! Component: 100 - total flux cleaned = -0.00149131 Jy ! Component: 150 - total flux cleaned = -0.00122307 Jy ! Component: 200 - total flux cleaned = -0.000805637 Jy ! Component: 250 - total flux cleaned = -0.000403395 Jy ! Component: 300 - total flux cleaned = -2.20131e-05 Jy ! Component: 350 - total flux cleaned = 0.000272024 Jy ! Component: 400 - total flux cleaned = 0.000627437 Jy ! Component: 450 - total flux cleaned = 0.00110854 Jy ! Component: 500 - total flux cleaned = 0.00117501 Jy ! Component: 550 - total flux cleaned = 0.00111138 Jy ! Component: 600 - total flux cleaned = 0.00111263 Jy ! Component: 650 - total flux cleaned = 0.00123564 Jy ! Component: 700 - total flux cleaned = 0.00123558 Jy ! Component: 750 - total flux cleaned = 0.00129397 Jy ! Component: 800 - total flux cleaned = 0.00123662 Jy ! Component: 850 - total flux cleaned = 0.00101295 Jy ! Component: 900 - total flux cleaned = 0.00079489 Jy ! Component: 950 - total flux cleaned = 0.000741519 Jy ! Component: 1000 - total flux cleaned = 0.000636719 Jy ! Component: 1050 - total flux cleaned = 0.000379743 Jy ! Component: 1100 - total flux cleaned = 0.00033075 Jy ! Component: 1150 - total flux cleaned = 0.000231228 Jy ! Component: 1200 - total flux cleaned = 0.000231342 Jy ! Component: 1250 - total flux cleaned = 8.74648e-05 Jy ! Component: 1300 - total flux cleaned = 4.00706e-05 Jy ! Component: 1350 - total flux cleaned = -0.000193158 Jy ! Component: 1400 - total flux cleaned = -0.000285223 Jy ! Component: 1450 - total flux cleaned = -0.000466395 Jy ! Component: 1500 - total flux cleaned = -0.000555615 Jy ! Component: 1550 - total flux cleaned = -0.000600033 Jy ! Component: 1600 - total flux cleaned = -0.000730842 Jy ! Component: 1650 - total flux cleaned = -0.000946373 Jy ! Component: 1700 - total flux cleaned = -0.000989142 Jy ! Component: 1750 - total flux cleaned = -0.00124231 Jy ! Component: 1800 - total flux cleaned = -0.00153434 Jy ! Component: 1850 - total flux cleaned = -0.00182275 Jy ! Component: 1900 - total flux cleaned = -0.00206747 Jy ! Component: 1950 - total flux cleaned = -0.00235084 Jy ! Component: 2000 - total flux cleaned = -0.00259172 Jy ! Component: 2050 - total flux cleaned = -0.00282977 Jy ! Component: 2100 - total flux cleaned = -0.0030656 Jy ! Component: 2150 - total flux cleaned = -0.00341548 Jy ! Component: 2200 - total flux cleaned = -0.00364674 Jy ! Component: 2250 - total flux cleaned = -0.00399101 Jy ! Component: 2300 - total flux cleaned = -0.00425628 Jy ! Component: 2350 - total flux cleaned = -0.00448193 Jy ! Component: 2400 - total flux cleaned = -0.00478043 Jy ! Component: 2450 - total flux cleaned = -0.00507623 Jy ! Component: 2500 - total flux cleaned = -0.00526005 Jy ! Component: 2550 - total flux cleaned = -0.00547913 Jy ! Component: 2600 - total flux cleaned = -0.00562416 Jy ! Component: 2650 - total flux cleaned = -0.00580427 Jy ! Component: 2700 - total flux cleaned = -0.00605471 Jy ! Component: 2750 - total flux cleaned = -0.00626769 Jy ! Component: 2800 - total flux cleaned = -0.00651474 Jy ! Component: 2850 - total flux cleaned = -0.00676062 Jy ! Component: 2900 - total flux cleaned = -0.00697009 Jy ! Component: 2950 - total flux cleaned = -0.00714396 Jy ! Component: 3000 - total flux cleaned = -0.00735139 Jy ! Component: 3050 - total flux cleaned = -0.00759225 Jy ! Component: 3100 - total flux cleaned = -0.00783167 Jy ! Component: 3150 - total flux cleaned = -0.00810384 Jy ! Component: 3200 - total flux cleaned = -0.00837499 Jy ! Component: 3250 - total flux cleaned = -0.00864524 Jy ! Component: 3300 - total flux cleaned = -0.00891476 Jy ! Component: 3350 - total flux cleaned = -0.00921737 Jy ! Component: 3400 - total flux cleaned = -0.0094526 Jy ! Component: 3450 - total flux cleaned = -0.00978791 Jy ! Component: 3500 - total flux cleaned = -0.0100224 Jy ! Component: 3550 - total flux cleaned = -0.0102566 Jy ! Component: 3600 - total flux cleaned = -0.0105577 Jy ! Component: 3650 - total flux cleaned = -0.0108249 Jy ! Component: 3700 - total flux cleaned = -0.0110586 Jy ! Component: 3750 - total flux cleaned = -0.0113584 Jy ! Component: 3800 - total flux cleaned = -0.0115919 Jy ! Component: 3850 - total flux cleaned = -0.0118583 Jy ! Component: 3900 - total flux cleaned = -0.0120918 Jy ! Component: 3950 - total flux cleaned = -0.0122918 Jy ! Component: 4000 - total flux cleaned = -0.0125581 Jy ! Component: 4050 - total flux cleaned = -0.0127578 Jy ! Total flux subtracted in 4096 components = -0.012891 Jy ! Clean residual min=-0.002074 max=0.002050 Jy/beam ! Clean residual mean=-0.000020 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.22381 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 423 components and 0.22381 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.842 x 24.66 at -10.92 degrees (North through East) ! Clean map min=-0.0064886 max=0.20833 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.208334 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000635443 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.915034 0.915034 1.83007 3.66014 7.32027 14.6405 29.2811 58.5622 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.208 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.842 x 24.66 at -10.92 degrees (North through East) ! Clean map min=-0.0064886 max=0.20833 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:48:48 2019