! Started logfile: J0236-2953_S_2017_10_09_pus_uvs.log on Sun May 12 13:02:53 2019 obs J0236-2953_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_10_09_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.376736 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.826340Jy sigma=0.006275 ! Fit after self-cal, rms=0.812274Jy sigma=0.006160 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.542 mas, bmaj=32.55 mas, bpa=-5.399 degrees ! Estimated noise=4663.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139429 Jy ! Component: 100 - total flux cleaned = 0.190197 Jy ! Total flux subtracted in 100 components = 0.190197 Jy ! Clean residual min=-0.019902 max=0.022463 Jy/beam ! Clean residual mean=0.000172 rms=0.006614 Jy/beam ! Combined flux in latest and established models = 0.190197 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.190197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101983Jy sigma=0.000709 ! Fit after self-cal, rms=0.101555Jy sigma=0.000707 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.982 mas, bmaj=34.07 mas, bpa=-6.673 degrees ! Estimated noise=4274.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298111 Jy ! Component: 100 - total flux cleaned = 0.033024 Jy ! Component: 150 - total flux cleaned = 0.0330665 Jy ! Component: 200 - total flux cleaned = 0.0326301 Jy ! Total flux subtracted in 200 components = 0.0326301 Jy ! Clean residual min=-0.007015 max=0.007056 Jy/beam ! Clean residual mean=-0.000041 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.222827 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 89 components and 0.222827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091115Jy sigma=0.000644 ! Fit after self-cal, rms=0.090787Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 KP 1.04 ! LA 1.00 MK 1.00* NL 0.92 OV 1.00* ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.96 KP 1.03 ! LA 0.97 MK 1.00* NL 1.07 OV 1.00* ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.09 KP 0.84 ! LA 0.93 MK 1.00* NL 1.12 OV 1.00* ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.090787Jy sigma=0.000642 ! Fit after self-cal, rms=0.087729Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.963 mas, bmaj=34.3 mas, bpa=-6.568 degrees ! Estimated noise=4296.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134188 Jy ! Component: 100 - total flux cleaned = 0.00261529 Jy ! Component: 150 - total flux cleaned = 0.00336747 Jy ! Component: 200 - total flux cleaned = 0.00338525 Jy ! Total flux subtracted in 200 components = 0.00338525 Jy ! Clean residual min=-0.001903 max=0.001900 Jy/beam ! Clean residual mean=-0.000003 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.226212 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 150 components and 0.226212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087060Jy sigma=0.000631 ! Fit after self-cal, rms=0.086985Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086985Jy sigma=0.000630 ! Fit after self-cal, rms=0.086624Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.96 mas, bmaj=34.37 mas, bpa=-6.57 degrees ! Estimated noise=4280.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102646 Jy ! Component: 100 - total flux cleaned = 0.00102665 Jy ! Component: 150 - total flux cleaned = 0.000948086 Jy ! Component: 200 - total flux cleaned = 0.00056972 Jy ! Total flux subtracted in 200 components = 0.00056972 Jy ! Clean residual min=-0.001247 max=0.001227 Jy/beam ! Clean residual mean=-0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.226782 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 195 components and 0.226782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086419Jy sigma=0.000629 ! Fit after self-cal, rms=0.086421Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305437 Jy ! Component: 100 - total flux cleaned = 0.000236001 Jy ! Component: 150 - total flux cleaned = 0.000114609 Jy ! Component: 200 - total flux cleaned = 0.000168806 Jy ! Total flux subtracted in 200 components = 0.000168806 Jy ! Clean residual min=-0.000914 max=0.000915 Jy/beam ! Clean residual mean=0.000001 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.226951 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 236 components and 0.226951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086322Jy sigma=0.000628 ! Fit after self-cal, rms=0.086320Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086320Jy sigma=0.000628 ! Fit after self-cal, rms=0.086070Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.955 mas, bmaj=34.4 mas, bpa=-6.575 degrees ! Estimated noise=4266.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290822 Jy ! Component: 100 - total flux cleaned = -0.000235263 Jy ! Component: 150 - total flux cleaned = -0.000134595 Jy ! Component: 200 - total flux cleaned = 1.08289e-05 Jy ! Total flux subtracted in 200 components = 1.08289e-05 Jy ! Clean residual min=-0.000782 max=0.000793 Jy/beam ! Clean residual mean=0.000001 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.226962 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 278 components and 0.226962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086003Jy sigma=0.000628 ! Fit after self-cal, rms=0.086002Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344703 Jy ! Component: 100 - total flux cleaned = -0.000387661 Jy ! Component: 150 - total flux cleaned = -0.000389913 Jy ! Component: 200 - total flux cleaned = -0.00034984 Jy ! Total flux subtracted in 200 components = -0.00034984 Jy ! Clean residual min=-0.000656 max=0.000655 Jy/beam ! Clean residual mean=0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.226612 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 323 components and 0.226612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085958Jy sigma=0.000628 ! Fit after self-cal, rms=0.085960Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085960Jy sigma=0.000628 ! Fit after self-cal, rms=0.085773Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.992 mas, bmaj=32.47 mas, bpa=-7.486 degrees ! Estimated noise=4775.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544569 Jy ! Component: 100 - total flux cleaned = -0.000830337 Jy ! Component: 150 - total flux cleaned = -0.000906424 Jy ! Component: 200 - total flux cleaned = -0.00094365 Jy ! Total flux subtracted in 200 components = -0.00094365 Jy ! Clean residual min=-0.000590 max=0.000589 Jy/beam ! Clean residual mean=0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.225668 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 366 components and 0.225668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085741Jy sigma=0.000627 ! Fit after self-cal, rms=0.085739Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453612 Jy ! Component: 100 - total flux cleaned = 0.000389522 Jy ! Component: 150 - total flux cleaned = 0.000267251 Jy ! Component: 200 - total flux cleaned = 0.000208861 Jy ! Total flux subtracted in 200 components = 0.000208861 Jy ! Clean residual min=-0.000479 max=0.000478 Jy/beam ! Clean residual mean=-0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.225877 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 407 components and 0.225877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085717Jy sigma=0.000627 ! Fit after self-cal, rms=0.085720Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.953 mas, bmaj=34.41 mas, bpa=-6.582 degrees ! Estimated noise=4256.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.953 x 34.41 at -6.582 degrees (North through East) ! Clean map min=-0.0066377 max=0.1358 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.559 mas, bmaj=32.85 mas, bpa=-5.415 degrees ! Estimated noise=4647.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13747 Jy ! Component: 100 - total flux cleaned = 0.187121 Jy ! Component: 150 - total flux cleaned = 0.192136 Jy ! Component: 200 - total flux cleaned = 0.192163 Jy ! Total flux subtracted in 200 components = 0.192163 Jy ! Clean residual min=-0.012403 max=0.012139 Jy/beam ! Clean residual mean=0.000023 rms=0.003445 Jy/beam ! Combined flux in latest and established models = 0.192163 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.192163 Jy ! Inverting map and beam ! Estimated beam: bmin=4.953 mas, bmaj=34.41 mas, bpa=-6.582 degrees ! Estimated noise=4256.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010954 Jy ! Component: 100 - total flux cleaned = 0.0107075 Jy ! Component: 150 - total flux cleaned = 0.0109675 Jy ! Component: 200 - total flux cleaned = 0.0118983 Jy ! Total flux subtracted in 200 components = 0.0118983 Jy ! Clean residual min=-0.003693 max=0.003669 Jy/beam ! Clean residual mean=-0.000009 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.204062 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 128 components and 0.204062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.992 mas, bmaj=32.47 mas, bpa=-7.486 degrees ! Estimated noise=4775.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554988 Jy ! Component: 100 - total flux cleaned = 0.00122414 Jy ! Component: 150 - total flux cleaned = 0.00148747 Jy ! Component: 200 - total flux cleaned = 0.00209228 Jy ! Total flux subtracted in 200 components = 0.00209228 Jy ! Clean residual min=-0.001832 max=0.001871 Jy/beam ! Clean residual mean=0.000007 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.206154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434045 Jy ! Component: 100 - total flux cleaned = 0.000740216 Jy ! Component: 150 - total flux cleaned = 0.0010377 Jy ! Component: 200 - total flux cleaned = 0.00142802 Jy ! Total flux subtracted in 200 components = 0.00142802 Jy ! Clean residual min=-0.001622 max=0.001637 Jy/beam ! Clean residual mean=0.000006 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.207582 Jy ! Adding 163 model components to the UV plane model. ! The established model now contains 289 components and 0.207582 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.953 mas, bmaj=34.41 mas, bpa=-6.582 degrees ! Estimated noise=4256.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.53373e-05 Jy ! Component: 100 - total flux cleaned = -0.00022959 Jy ! Component: 150 - total flux cleaned = -0.000136098 Jy ! Component: 200 - total flux cleaned = 0.00031767 Jy ! Total flux subtracted in 200 components = 0.00031767 Jy ! Clean residual min=-0.001494 max=0.001495 Jy/beam ! Clean residual mean=-0.000004 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.2079 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 336 components and 0.2079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085901Jy sigma=0.000628 ! Fit after self-cal, rms=0.085907Jy sigma=0.000628 wmodel J0236-2953_S_2017_10_09_pus_map.mod ! Writing 336 model components to file: J0236-2953_S_2017_10_09_pus_map.mod wobs J0236-2953_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_10_09_pus_uvs.fits wwins J0236-2953_S_2017_10_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0236-2953_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.953 x 34.41 at -6.582 degrees (North through East) ! Clean map min=-0.0057161 max=0.13226 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000478216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08471 1.08471 2.16941 4.33883 8.67766 17.3553 34.7106 69.4213 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.953 x 34.41 at -6.582 degrees (North through East) ! Clean map min=-0.0057161 max=0.13226 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:57 2019