! Started logfile: J0236-2953_S_2017_08_12_pus_uvs.log on Fri May 10 14:50:28 2019 obs J0236-2953_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_08_12_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.602424 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 5964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 481 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.830837Jy sigma=0.005520 ! Fit after self-cal, rms=0.813229Jy sigma=0.005425 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=6.736 mas, bpa=-2.516 degrees ! Estimated noise=2299.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147684 Jy ! Component: 100 - total flux cleaned = 0.180907 Jy ! Total flux subtracted in 100 components = 0.180907 Jy ! Clean residual min=-0.009003 max=0.013215 Jy/beam ! Clean residual mean=-0.000025 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.180907 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.180907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112793Jy sigma=0.000717 ! Fit after self-cal, rms=0.112803Jy sigma=0.000717 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=7.488 mas, bpa=-2.863 degrees ! Estimated noise=1815.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018856 Jy ! Component: 100 - total flux cleaned = 0.0276275 Jy ! Component: 150 - total flux cleaned = 0.0319364 Jy ! Component: 200 - total flux cleaned = 0.0338637 Jy ! Total flux subtracted in 200 components = 0.0338637 Jy ! Clean residual min=-0.007430 max=0.009802 Jy/beam ! Clean residual mean=-0.000038 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.214771 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.214771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110446Jy sigma=0.000694 ! Fit after self-cal, rms=0.110468Jy sigma=0.000693 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 1.22 KP 1.10 ! LA 0.98 MK 0.93 NL 1.00* OV 0.96 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.30 KP 0.96 ! LA 0.90 MK 0.94 NL 1.13 OV 1.04 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.31 KP 0.95 ! LA 0.93 MK 1.03 NL 1.07 OV 0.91 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.110468Jy sigma=0.000693 ! Fit after self-cal, rms=0.115895Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.511 mas, bpa=-1.777 degrees ! Estimated noise=1826.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002973 Jy ! Component: 100 - total flux cleaned = -0.000456864 Jy ! Component: 150 - total flux cleaned = -0.000659685 Jy ! Component: 200 - total flux cleaned = -0.000842063 Jy ! Total flux subtracted in 200 components = -0.000842063 Jy ! Clean residual min=-0.006237 max=0.005932 Jy/beam ! Clean residual mean=-0.000000 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.213929 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.213929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115790Jy sigma=0.000680 ! Fit after self-cal, rms=0.116071Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116071Jy sigma=0.000679 ! Fit after self-cal, rms=0.117753Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=7.545 mas, bpa=-1.691 degrees ! Estimated noise=1829.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000440084 Jy ! Component: 100 - total flux cleaned = -0.000570228 Jy ! Component: 150 - total flux cleaned = -0.000647569 Jy ! Component: 200 - total flux cleaned = -0.000717906 Jy ! Total flux subtracted in 200 components = -0.000717906 Jy ! Clean residual min=-0.005156 max=0.005527 Jy/beam ! Clean residual mean=0.000001 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.213211 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.213211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117718Jy sigma=0.000672 ! Fit after self-cal, rms=0.117786Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331295 Jy ! Component: 100 - total flux cleaned = 0.00333126 Jy ! Component: 150 - total flux cleaned = 0.00333238 Jy ! Component: 200 - total flux cleaned = 0.00326472 Jy ! Total flux subtracted in 200 components = 0.00326472 Jy ! Clean residual min=-0.004946 max=0.004937 Jy/beam ! Clean residual mean=0.000008 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.216476 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 70 components and 0.216476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117522Jy sigma=0.000670 ! Fit after self-cal, rms=0.117504Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117504Jy sigma=0.000670 ! Fit after self-cal, rms=0.117512Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.533 mas, bpa=-1.838 degrees ! Estimated noise=1824.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559738 Jy ! Component: 100 - total flux cleaned = 0.000434503 Jy ! Component: 150 - total flux cleaned = 0.000278731 Jy ! Component: 200 - total flux cleaned = 9.53484e-05 Jy ! Total flux subtracted in 200 components = 9.53484e-05 Jy ! Clean residual min=-0.005211 max=0.004213 Jy/beam ! Clean residual mean=0.000010 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.216571 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.216571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117435Jy sigma=0.000665 ! Fit after self-cal, rms=0.117479Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111096 Jy ! Component: 100 - total flux cleaned = -5.33756e-05 Jy ! Component: 150 - total flux cleaned = -0.000241638 Jy ! Component: 200 - total flux cleaned = -0.000383691 Jy ! Total flux subtracted in 200 components = -0.000383691 Jy ! Clean residual min=-0.005198 max=0.004252 Jy/beam ! Clean residual mean=0.000010 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.216188 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 0.216188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117444Jy sigma=0.000665 ! Fit after self-cal, rms=0.117446Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117446Jy sigma=0.000665 ! Fit after self-cal, rms=0.117300Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.786 mas, bmaj=19.75 mas, bpa=-1.715 degrees ! Estimated noise=2476.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255873 Jy ! Component: 100 - total flux cleaned = -0.000427144 Jy ! Component: 150 - total flux cleaned = -0.000554313 Jy ! Component: 200 - total flux cleaned = -0.000642329 Jy ! Total flux subtracted in 200 components = -0.000642329 Jy ! Clean residual min=-0.004984 max=0.004492 Jy/beam ! Clean residual mean=0.000024 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.215545 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 106 components and 0.215545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117282Jy sigma=0.000665 ! Fit after self-cal, rms=0.117284Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254178 Jy ! Component: 100 - total flux cleaned = -0.000339205 Jy ! Component: 150 - total flux cleaned = -0.000392455 Jy ! Component: 200 - total flux cleaned = -0.000445547 Jy ! Total flux subtracted in 200 components = -0.000445547 Jy ! Clean residual min=-0.005003 max=0.004512 Jy/beam ! Clean residual mean=0.000023 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.2151 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.2151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117273Jy sigma=0.000665 ! Fit after self-cal, rms=0.117276Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.531 mas, bpa=-1.89 degrees ! Estimated noise=1822.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.531 at -1.89 degrees (North through East) ! Clean map min=-0.0050119 max=0.1905 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.4 mas, bmaj=6.662 mas, bpa=-1.491 degrees ! Estimated noise=2367.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150834 Jy ! Component: 100 - total flux cleaned = 0.185334 Jy ! Component: 150 - total flux cleaned = 0.198458 Jy ! Component: 200 - total flux cleaned = 0.205834 Jy ! Total flux subtracted in 200 components = 0.205834 Jy ! Clean residual min=-0.006647 max=0.006141 Jy/beam ! Clean residual mean=-0.000001 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.205834 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.205834 Jy ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.531 mas, bpa=-1.89 degrees ! Estimated noise=1822.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537833 Jy ! Component: 100 - total flux cleaned = 0.00649815 Jy ! Component: 150 - total flux cleaned = 0.00698782 Jy ! Component: 200 - total flux cleaned = 0.00732714 Jy ! Total flux subtracted in 200 components = 0.00732714 Jy ! Clean residual min=-0.005336 max=0.004130 Jy/beam ! Clean residual mean=0.000006 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.213161 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 62 components and 0.213161 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.786 mas, bmaj=19.75 mas, bpa=-1.715 degrees ! Estimated noise=2476.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752503 Jy ! Component: 100 - total flux cleaned = 0.000817569 Jy ! Component: 150 - total flux cleaned = 0.000811938 Jy ! Component: 200 - total flux cleaned = 0.000759582 Jy ! Total flux subtracted in 200 components = 0.000759582 Jy ! Clean residual min=-0.005119 max=0.004606 Jy/beam ! Clean residual mean=0.000018 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.21392 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.39541e-05 Jy ! Component: 100 - total flux cleaned = 3.11636e-06 Jy ! Component: 150 - total flux cleaned = 3.55171e-06 Jy ! Component: 200 - total flux cleaned = -3.00364e-05 Jy ! Total flux subtracted in 200 components = -3.00364e-05 Jy ! Clean residual min=-0.005075 max=0.004535 Jy/beam ! Clean residual mean=0.000019 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.21389 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 89 components and 0.21389 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.531 mas, bpa=-1.89 degrees ! Estimated noise=1822.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198883 Jy ! Component: 100 - total flux cleaned = 0.00012771 Jy ! Component: 150 - total flux cleaned = 2.12805e-05 Jy ! Component: 200 - total flux cleaned = -7.22032e-05 Jy ! Total flux subtracted in 200 components = -7.22032e-05 Jy ! Clean residual min=-0.005328 max=0.004191 Jy/beam ! Clean residual mean=0.000008 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.213818 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.213818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117276Jy sigma=0.000665 ! Fit after self-cal, rms=0.117260Jy sigma=0.000665 wmodel J0236-2953_S_2017_08_12_pus_map.mod ! Writing 106 model components to file: J0236-2953_S_2017_08_12_pus_map.mod wobs J0236-2953_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_08_12_pus_uvs.fits wwins J0236-2953_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0236-2953_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224539 Jy ! Component: 100 - total flux cleaned = -0.00286543 Jy ! Component: 150 - total flux cleaned = -0.00300459 Jy ! Component: 200 - total flux cleaned = -0.00320472 Jy ! Component: 250 - total flux cleaned = -0.00320499 Jy ! Component: 300 - total flux cleaned = -0.00320569 Jy ! Component: 350 - total flux cleaned = -0.00326466 Jy ! Component: 400 - total flux cleaned = -0.00332086 Jy ! Component: 450 - total flux cleaned = -0.0034884 Jy ! Component: 500 - total flux cleaned = -0.00370642 Jy ! Component: 550 - total flux cleaned = -0.00397157 Jy ! Component: 600 - total flux cleaned = -0.00412647 Jy ! Component: 650 - total flux cleaned = -0.0043295 Jy ! Component: 700 - total flux cleaned = -0.00462715 Jy ! Component: 750 - total flux cleaned = -0.0047737 Jy ! Component: 800 - total flux cleaned = -0.00496581 Jy ! Component: 850 - total flux cleaned = -0.00515573 Jy ! Component: 900 - total flux cleaned = -0.00534267 Jy ! Component: 950 - total flux cleaned = -0.00557186 Jy ! Component: 1000 - total flux cleaned = -0.00579761 Jy ! Component: 1050 - total flux cleaned = -0.00593086 Jy ! Component: 1100 - total flux cleaned = -0.00610617 Jy ! Component: 1150 - total flux cleaned = -0.0062358 Jy ! Component: 1200 - total flux cleaned = -0.00636335 Jy ! Component: 1250 - total flux cleaned = -0.00640594 Jy ! Component: 1300 - total flux cleaned = -0.00653072 Jy ! Component: 1350 - total flux cleaned = -0.00669418 Jy ! Component: 1400 - total flux cleaned = -0.00677422 Jy ! Component: 1450 - total flux cleaned = -0.0066943 Jy ! Component: 1500 - total flux cleaned = -0.00665517 Jy ! Component: 1550 - total flux cleaned = -0.00677209 Jy ! Component: 1600 - total flux cleaned = -0.00684914 Jy ! Component: 1650 - total flux cleaned = -0.00688743 Jy ! Component: 1700 - total flux cleaned = -0.00692479 Jy ! Component: 1750 - total flux cleaned = -0.00681257 Jy ! Component: 1800 - total flux cleaned = -0.00692356 Jy ! Component: 1850 - total flux cleaned = -0.00699655 Jy ! Component: 1900 - total flux cleaned = -0.00699623 Jy ! Component: 1950 - total flux cleaned = -0.00696023 Jy ! Component: 2000 - total flux cleaned = -0.00685351 Jy ! Component: 2050 - total flux cleaned = -0.0068188 Jy ! Component: 2100 - total flux cleaned = -0.0069939 Jy ! Component: 2150 - total flux cleaned = -0.00706279 Jy ! Component: 2200 - total flux cleaned = -0.00716545 Jy ! Component: 2250 - total flux cleaned = -0.00726686 Jy ! Component: 2300 - total flux cleaned = -0.00716574 Jy ! Component: 2350 - total flux cleaned = -0.00726583 Jy ! Component: 2400 - total flux cleaned = -0.00729913 Jy ! Component: 2450 - total flux cleaned = -0.00729905 Jy ! Component: 2500 - total flux cleaned = -0.00736423 Jy ! Component: 2550 - total flux cleaned = -0.0073318 Jy ! Component: 2600 - total flux cleaned = -0.00739568 Jy ! Component: 2650 - total flux cleaned = -0.00745932 Jy ! Component: 2700 - total flux cleaned = -0.00749065 Jy ! Component: 2750 - total flux cleaned = -0.00761574 Jy ! Component: 2800 - total flux cleaned = -0.00752239 Jy ! Component: 2850 - total flux cleaned = -0.0076461 Jy ! Component: 2900 - total flux cleaned = -0.00764589 Jy ! Component: 2950 - total flux cleaned = -0.00782842 Jy ! Component: 3000 - total flux cleaned = -0.00788873 Jy ! Component: 3050 - total flux cleaned = -0.00800836 Jy ! Component: 3100 - total flux cleaned = -0.00800859 Jy ! Component: 3150 - total flux cleaned = -0.00809729 Jy ! Component: 3200 - total flux cleaned = -0.00815607 Jy ! Component: 3250 - total flux cleaned = -0.00818516 Jy ! Component: 3300 - total flux cleaned = -0.0082719 Jy ! Component: 3350 - total flux cleaned = -0.00844451 Jy ! Component: 3400 - total flux cleaned = -0.00853016 Jy ! Component: 3450 - total flux cleaned = -0.00858712 Jy ! Component: 3500 - total flux cleaned = -0.00867184 Jy ! Component: 3550 - total flux cleaned = -0.0087276 Jy ! Component: 3600 - total flux cleaned = -0.00878348 Jy ! Component: 3650 - total flux cleaned = -0.00883857 Jy ! Component: 3700 - total flux cleaned = -0.00892097 Jy ! Component: 3750 - total flux cleaned = -0.0090029 Jy ! Component: 3800 - total flux cleaned = -0.00908432 Jy ! Component: 3850 - total flux cleaned = -0.00916536 Jy ! Component: 3900 - total flux cleaned = -0.00921891 Jy ! Component: 3950 - total flux cleaned = -0.00924567 Jy ! Component: 4000 - total flux cleaned = -0.00935158 Jy ! Component: 4050 - total flux cleaned = -0.00935136 Jy ! Total flux subtracted in 4096 components = -0.00929879 Jy ! Clean residual min=-0.001423 max=0.001590 Jy/beam ! Clean residual mean=0.000005 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.204519 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 411 components and 0.204519 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.531 at -1.89 degrees (North through East) ! Clean map min=-0.0044711 max=0.19212 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.192123 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000480466 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.750246 0.750246 1.50049 3.00098 6.00197 12.0039 24.0079 48.0157 96.0315 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.192 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.531 at -1.89 degrees (North through East) ! Clean map min=-0.0044711 max=0.19212 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:50:32 2019