! Started logfile: J0236-2953_S_2017_07_09_pus_uvs.log on Wed May 8 14:40:21 2019 obs J0236-2953_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_07_09_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.515873 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 3900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 289 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.800576Jy sigma=0.005771 ! Fit after self-cal, rms=0.789197Jy sigma=0.005698 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=7.869 mas, bpa=4.793 degrees ! Estimated noise=2465.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165983 Jy ! Component: 100 - total flux cleaned = 0.202322 Jy ! Total flux subtracted in 100 components = 0.202322 Jy ! Clean residual min=-0.009779 max=0.016080 Jy/beam ! Clean residual mean=-0.000053 rms=0.002715 Jy/beam ! Combined flux in latest and established models = 0.202322 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.202322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107421Jy sigma=0.000729 ! Fit after self-cal, rms=0.107419Jy sigma=0.000729 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=9.104 mas, bpa=3.557 degrees ! Estimated noise=1859.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201732 Jy ! Component: 100 - total flux cleaned = 0.0302532 Jy ! Component: 150 - total flux cleaned = 0.0359094 Jy ! Component: 200 - total flux cleaned = 0.0391014 Jy ! Total flux subtracted in 200 components = 0.0391014 Jy ! Clean residual min=-0.006161 max=0.007958 Jy/beam ! Clean residual mean=-0.000051 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.241424 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.241424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104017Jy sigma=0.000700 ! Fit after self-cal, rms=0.103951Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.03 ! LA 0.96 MK 1.00 NL 1.00* OV 1.03 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.99 ! LA 0.93 MK 0.99 NL 1.38 OV 0.99 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.97 ! LA 0.97 MK 1.02 NL 1.12 OV 0.92 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.00* ! LA 0.93 MK 0.93 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.103951Jy sigma=0.000699 ! Fit after self-cal, rms=0.106376Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=9.074 mas, bpa=3.658 degrees ! Estimated noise=1868.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015605 Jy ! Component: 100 - total flux cleaned = -0.00155683 Jy ! Component: 150 - total flux cleaned = -0.00160424 Jy ! Component: 200 - total flux cleaned = -0.00169592 Jy ! Total flux subtracted in 200 components = -0.00169592 Jy ! Clean residual min=-0.005504 max=0.006097 Jy/beam ! Clean residual mean=-0.000018 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.239728 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.239728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106292Jy sigma=0.000685 ! Fit after self-cal, rms=0.106421Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106421Jy sigma=0.000685 ! Fit after self-cal, rms=0.111075Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=9.065 mas, bpa=3.685 degrees ! Estimated noise=1878.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000535671 Jy ! Component: 100 - total flux cleaned = -0.000541298 Jy ! Component: 150 - total flux cleaned = -0.000543125 Jy ! Component: 200 - total flux cleaned = -0.000488674 Jy ! Total flux subtracted in 200 components = -0.000488674 Jy ! Clean residual min=-0.004953 max=0.006148 Jy/beam ! Clean residual mean=-0.000021 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.239239 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.239239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110981Jy sigma=0.000680 ! Fit after self-cal, rms=0.111046Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-82, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298416 Jy ! Component: 100 - total flux cleaned = 0.00270141 Jy ! Component: 150 - total flux cleaned = 0.00248956 Jy ! Component: 200 - total flux cleaned = 0.00231664 Jy ! Total flux subtracted in 200 components = 0.00231664 Jy ! Clean residual min=-0.004922 max=0.004003 Jy/beam ! Clean residual mean=-0.000033 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.241556 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.241556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110554Jy sigma=0.000677 ! Fit after self-cal, rms=0.110515Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110515Jy sigma=0.000677 ! Fit after self-cal, rms=0.113159Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=9.083 mas, bpa=3.629 degrees ! Estimated noise=1868.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745355 Jy ! Component: 100 - total flux cleaned = 0.000819419 Jy ! Component: 150 - total flux cleaned = 0.000942455 Jy ! Component: 200 - total flux cleaned = 0.000829015 Jy ! Total flux subtracted in 200 components = 0.000829015 Jy ! Clean residual min=-0.004434 max=0.003740 Jy/beam ! Clean residual mean=-0.000018 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.242385 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.242385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113028Jy sigma=0.000672 ! Fit after self-cal, rms=0.113100Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.13071e-05 Jy ! Component: 100 - total flux cleaned = 8.77072e-06 Jy ! Component: 150 - total flux cleaned = -4.06724e-05 Jy ! Component: 200 - total flux cleaned = -4.21748e-05 Jy ! Total flux subtracted in 200 components = -4.21748e-05 Jy ! Clean residual min=-0.004414 max=0.003745 Jy/beam ! Clean residual mean=-0.000019 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.242343 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 0.242343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113027Jy sigma=0.000672 ! Fit after self-cal, rms=0.113017Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113017Jy sigma=0.000672 ! Fit after self-cal, rms=0.112711Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.616 mas, bmaj=26.42 mas, bpa=4.831 degrees ! Estimated noise=2375.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000714584 Jy ! Component: 100 - total flux cleaned = -0.000860305 Jy ! Component: 150 - total flux cleaned = -0.000963192 Jy ! Component: 200 - total flux cleaned = -0.0010616 Jy ! Total flux subtracted in 200 components = -0.0010616 Jy ! Clean residual min=-0.004451 max=0.004311 Jy/beam ! Clean residual mean=-0.000033 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.241281 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 136 components and 0.241281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112667Jy sigma=0.000672 ! Fit after self-cal, rms=0.112664Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181039 Jy ! Component: 100 - total flux cleaned = -0.000274309 Jy ! Component: 150 - total flux cleaned = -0.000303478 Jy ! Component: 200 - total flux cleaned = -0.000331257 Jy ! Total flux subtracted in 200 components = -0.000331257 Jy ! Clean residual min=-0.004443 max=0.004345 Jy/beam ! Clean residual mean=-0.000033 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.24095 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 139 components and 0.24095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112631Jy sigma=0.000672 ! Fit after self-cal, rms=0.112626Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=9.084 mas, bpa=3.622 degrees ! Estimated noise=1867 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 9.084 at 3.622 degrees (North through East) ! Clean map min=-0.0041619 max=0.20632 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=7.876 mas, bpa=4.898 degrees ! Estimated noise=2484.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166415 Jy ! Component: 100 - total flux cleaned = 0.202798 Jy ! Component: 150 - total flux cleaned = 0.215163 Jy ! Component: 200 - total flux cleaned = 0.222575 Jy ! Total flux subtracted in 200 components = 0.222575 Jy ! Clean residual min=-0.006186 max=0.006080 Jy/beam ! Clean residual mean=-0.000023 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.222575 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.222575 Jy ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=9.084 mas, bpa=3.622 degrees ! Estimated noise=1867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00925656 Jy ! Component: 100 - total flux cleaned = 0.0125647 Jy ! Component: 150 - total flux cleaned = 0.01411 Jy ! Component: 200 - total flux cleaned = 0.0151272 Jy ! Total flux subtracted in 200 components = 0.0151272 Jy ! Clean residual min=-0.004687 max=0.004314 Jy/beam ! Clean residual mean=-0.000028 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.237702 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 87 components and 0.237702 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.616 mas, bmaj=26.42 mas, bpa=4.831 degrees ! Estimated noise=2375.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227931 Jy ! Component: 100 - total flux cleaned = 0.00277473 Jy ! Component: 150 - total flux cleaned = 0.00303353 Jy ! Component: 200 - total flux cleaned = 0.00298304 Jy ! Total flux subtracted in 200 components = 0.00298304 Jy ! Clean residual min=-0.004530 max=0.004052 Jy/beam ! Clean residual mean=-0.000039 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.240685 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.30809e-06 Jy ! Component: 100 - total flux cleaned = -4.74099e-05 Jy ! Component: 150 - total flux cleaned = -4.77702e-05 Jy ! Component: 200 - total flux cleaned = -8.74835e-05 Jy ! Total flux subtracted in 200 components = -8.74835e-05 Jy ! Clean residual min=-0.004466 max=0.004107 Jy/beam ! Clean residual mean=-0.000037 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.240597 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 122 components and 0.240597 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=9.084 mas, bpa=3.622 degrees ! Estimated noise=1867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.29503e-05 Jy ! Component: 100 - total flux cleaned = -1.8354e-07 Jy ! Component: 150 - total flux cleaned = -6.68845e-05 Jy ! Component: 200 - total flux cleaned = 5.36753e-05 Jy ! Total flux subtracted in 200 components = 5.36753e-05 Jy ! Clean residual min=-0.004428 max=0.003806 Jy/beam ! Clean residual mean=-0.000020 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.240651 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.240651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112747Jy sigma=0.000672 ! Fit after self-cal, rms=0.112713Jy sigma=0.000672 wmodel J0236-2953_S_2017_07_09_pus_map.mod ! Writing 139 model components to file: J0236-2953_S_2017_07_09_pus_map.mod wobs J0236-2953_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_07_09_pus_uvs.fits wwins J0236-2953_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0236-2953_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119476 Jy ! Component: 100 - total flux cleaned = -0.00133456 Jy ! Component: 150 - total flux cleaned = -0.0010743 Jy ! Component: 200 - total flux cleaned = -0.000952602 Jy ! Component: 250 - total flux cleaned = -0.000655614 Jy ! Component: 300 - total flux cleaned = -0.000370166 Jy ! Component: 350 - total flux cleaned = -0.000149882 Jy ! Component: 400 - total flux cleaned = -9.37849e-05 Jy ! Component: 450 - total flux cleaned = 1.04646e-05 Jy ! Component: 500 - total flux cleaned = 8.85352e-06 Jy ! Component: 550 - total flux cleaned = -4.0761e-05 Jy ! Component: 600 - total flux cleaned = 5.5874e-05 Jy ! Component: 650 - total flux cleaned = 0.000103646 Jy ! Component: 700 - total flux cleaned = 0.000286456 Jy ! Component: 750 - total flux cleaned = 0.000420118 Jy ! Component: 800 - total flux cleaned = 0.000507653 Jy ! Component: 850 - total flux cleaned = 0.000592505 Jy ! Component: 900 - total flux cleaned = 0.000676597 Jy ! Component: 950 - total flux cleaned = 0.000676598 Jy ! Component: 1000 - total flux cleaned = 0.00075805 Jy ! Component: 1050 - total flux cleaned = 0.00071867 Jy ! Component: 1100 - total flux cleaned = 0.000759113 Jy ! Component: 1150 - total flux cleaned = 0.000759142 Jy ! Component: 1200 - total flux cleaned = 0.00068412 Jy ! Component: 1250 - total flux cleaned = 0.000795696 Jy ! Component: 1300 - total flux cleaned = 0.000721772 Jy ! Component: 1350 - total flux cleaned = 0.0006122 Jy ! Component: 1400 - total flux cleaned = 0.000469994 Jy ! Component: 1450 - total flux cleaned = 0.000470765 Jy ! Component: 1500 - total flux cleaned = 0.000436335 Jy ! Component: 1550 - total flux cleaned = 0.000436536 Jy ! Component: 1600 - total flux cleaned = 0.00043596 Jy ! Component: 1650 - total flux cleaned = 0.000435903 Jy ! Component: 1700 - total flux cleaned = 0.000304053 Jy ! Component: 1750 - total flux cleaned = 0.000336836 Jy ! Component: 1800 - total flux cleaned = 0.000305095 Jy ! Component: 1850 - total flux cleaned = 0.000305191 Jy ! Component: 1900 - total flux cleaned = 0.000179871 Jy ! Component: 1950 - total flux cleaned = 0.000180541 Jy ! Component: 2000 - total flux cleaned = 0.000210733 Jy ! Component: 2050 - total flux cleaned = -1.00943e-06 Jy ! Component: 2100 - total flux cleaned = -6.07208e-05 Jy ! Component: 2150 - total flux cleaned = -6.03353e-05 Jy ! Component: 2200 - total flux cleaned = -0.000177182 Jy ! Component: 2250 - total flux cleaned = -0.00032092 Jy ! Component: 2300 - total flux cleaned = -0.000292322 Jy ! Component: 2350 - total flux cleaned = -0.000377397 Jy ! Component: 2400 - total flux cleaned = -0.000460904 Jy ! Component: 2450 - total flux cleaned = -0.00048862 Jy ! Component: 2500 - total flux cleaned = -0.000516103 Jy ! Component: 2550 - total flux cleaned = -0.000489147 Jy ! Component: 2600 - total flux cleaned = -0.000649937 Jy ! Component: 2650 - total flux cleaned = -0.000649889 Jy ! Component: 2700 - total flux cleaned = -0.000755352 Jy ! Component: 2750 - total flux cleaned = -0.000859748 Jy ! Component: 2800 - total flux cleaned = -0.000937086 Jy ! Component: 2850 - total flux cleaned = -0.000988822 Jy ! Component: 2900 - total flux cleaned = -0.000988888 Jy ! Component: 2950 - total flux cleaned = -0.00108979 Jy ! Component: 3000 - total flux cleaned = -0.00116456 Jy ! Component: 3050 - total flux cleaned = -0.00126326 Jy ! Component: 3100 - total flux cleaned = -0.00131232 Jy ! Component: 3150 - total flux cleaned = -0.00138545 Jy ! Component: 3200 - total flux cleaned = -0.0014577 Jy ! Component: 3250 - total flux cleaned = -0.001458 Jy ! Component: 3300 - total flux cleaned = -0.00150558 Jy ! Component: 3350 - total flux cleaned = -0.00162294 Jy ! Component: 3400 - total flux cleaned = -0.00164626 Jy ! Component: 3450 - total flux cleaned = -0.00166923 Jy ! Component: 3500 - total flux cleaned = -0.0016921 Jy ! Component: 3550 - total flux cleaned = -0.00171495 Jy ! Component: 3600 - total flux cleaned = -0.0017377 Jy ! Component: 3650 - total flux cleaned = -0.00178247 Jy ! Component: 3700 - total flux cleaned = -0.00182743 Jy ! Component: 3750 - total flux cleaned = -0.00189381 Jy ! Component: 3800 - total flux cleaned = -0.00191586 Jy ! Component: 3850 - total flux cleaned = -0.0019157 Jy ! Component: 3900 - total flux cleaned = -0.0019158 Jy ! Component: 3950 - total flux cleaned = -0.00198053 Jy ! Component: 4000 - total flux cleaned = -0.00200194 Jy ! Component: 4050 - total flux cleaned = -0.00208697 Jy ! Total flux subtracted in 4096 components = -0.00215049 Jy ! Clean residual min=-0.001186 max=0.001240 Jy/beam ! Clean residual mean=-0.000009 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.238501 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 395 components and 0.238501 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 9.084 at 3.622 degrees (North through East) ! Clean map min=-0.0034281 max=0.20898 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.208976 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000385734 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.553748 0.553748 1.1075 2.21499 4.42999 8.85997 17.7199 35.4399 70.8798 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.208 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 9.084 at 3.622 degrees (North through East) ! Clean map min=-0.0034281 max=0.20898 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:40:25 2019