! Started logfile: J0236-2953_S_2017_06_15_pus_uvs.log on Tue May 7 15:09:44 2019 obs J0236-2953_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_06_15_pus_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.486914 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 3944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 338 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859491Jy sigma=0.006303 ! Fit after self-cal, rms=0.832790Jy sigma=0.006120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=8.805 mas, bpa=1.17 degrees ! Estimated noise=2184.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127417 Jy ! Component: 100 - total flux cleaned = 0.157279 Jy ! Total flux subtracted in 100 components = 0.157279 Jy ! Clean residual min=-0.014390 max=0.030183 Jy/beam ! Clean residual mean=-0.000058 rms=0.004033 Jy/beam ! Combined flux in latest and established models = 0.157279 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.157279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115503Jy sigma=0.000822 ! Fit after self-cal, rms=0.115489Jy sigma=0.000822 ! Inverting map ! Added new window around map position (6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245224 Jy ! Component: 100 - total flux cleaned = 0.0363104 Jy ! Total flux subtracted in 100 components = 0.0363104 Jy ! Clean residual min=-0.012254 max=0.026682 Jy/beam ! Clean residual mean=-0.000039 rms=0.003467 Jy/beam ! Combined flux in latest and established models = 0.19359 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.19359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109793Jy sigma=0.000777 ! Fit after self-cal, rms=0.108946Jy sigma=0.000770 ! Inverting map ! Added new window around map position (-8, -13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181114 Jy ! Component: 100 - total flux cleaned = 0.0242698 Jy ! Total flux subtracted in 100 components = 0.0242698 Jy ! Clean residual min=-0.011927 max=0.013456 Jy/beam ! Clean residual mean=-0.000025 rms=0.003013 Jy/beam ! Combined flux in latest and established models = 0.217859 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.217859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106278Jy sigma=0.000751 ! Fit after self-cal, rms=0.106004Jy sigma=0.000749 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=10.08 mas, bpa=1.298 degrees ! Estimated noise=1820.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0077564 Jy ! Component: 100 - total flux cleaned = 0.00882097 Jy ! Component: 150 - total flux cleaned = 0.00997189 Jy ! Component: 200 - total flux cleaned = 0.0107676 Jy ! Total flux subtracted in 200 components = 0.0107676 Jy ! Clean residual min=-0.010072 max=0.011718 Jy/beam ! Clean residual mean=-0.000015 rms=0.002899 Jy/beam ! Combined flux in latest and established models = 0.228627 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.228627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104950Jy sigma=0.000740 ! Fit after self-cal, rms=0.104883Jy sigma=0.000740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.52 FD 0.89 HN 1.46 KP 0.97 ! LA 0.99 MK 0.97 NL 1.17 OV 0.86 ! PT 1.01 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.49 KP 1.12 ! LA 0.97 MK 0.94 NL 1.29 OV 0.84 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.23 KP 0.95 ! LA 0.98 MK 1.08 NL 0.90 OV 0.82 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.22 KP 1.00* ! LA 1.37 MK 1.04 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.104883Jy sigma=0.000740 ! Fit after self-cal, rms=0.112837Jy sigma=0.000703 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=10.05 mas, bpa=2.571 degrees ! Estimated noise=1881.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290259 Jy ! Component: 100 - total flux cleaned = -0.00358669 Jy ! Component: 150 - total flux cleaned = -0.00359392 Jy ! Component: 200 - total flux cleaned = -0.00335649 Jy ! Total flux subtracted in 200 components = -0.00335649 Jy ! Clean residual min=-0.007609 max=0.008499 Jy/beam ! Clean residual mean=0.000001 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 0.22527 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 65 components and 0.22527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112371Jy sigma=0.000699 ! Fit after self-cal, rms=0.112582Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112582Jy sigma=0.000698 ! Fit after self-cal, rms=0.140790Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=10.03 mas, bpa=2.593 degrees ! Estimated noise=1958.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152365 Jy ! Component: 100 - total flux cleaned = 0.000458609 Jy ! Component: 150 - total flux cleaned = -0.000103564 Jy ! Component: 200 - total flux cleaned = 1.47567e-05 Jy ! Total flux subtracted in 200 components = 1.47567e-05 Jy ! Clean residual min=-0.005686 max=0.005957 Jy/beam ! Clean residual mean=0.000023 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.225285 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.225285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140176Jy sigma=0.000670 ! Fit after self-cal, rms=0.141153Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000504284 Jy ! Component: 100 - total flux cleaned = -0.000116622 Jy ! Component: 150 - total flux cleaned = -0.000116995 Jy ! Component: 200 - total flux cleaned = -0.000111406 Jy ! Total flux subtracted in 200 components = -0.000111406 Jy ! Clean residual min=-0.005576 max=0.005939 Jy/beam ! Clean residual mean=0.000023 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.225174 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.225174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140995Jy sigma=0.000668 ! Fit after self-cal, rms=0.140995Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140995Jy sigma=0.000668 ! Fit after self-cal, rms=0.160725Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=10.08 mas, bpa=2.614 degrees ! Estimated noise=1956.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132377 Jy ! Component: 100 - total flux cleaned = -0.00117249 Jy ! Component: 150 - total flux cleaned = -0.00116968 Jy ! Component: 200 - total flux cleaned = -0.00117014 Jy ! Total flux subtracted in 200 components = -0.00117014 Jy ! Clean residual min=-0.005233 max=0.005024 Jy/beam ! Clean residual mean=0.000024 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.224004 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.224004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160632Jy sigma=0.000654 ! Fit after self-cal, rms=0.161046Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041807 Jy ! Component: 100 - total flux cleaned = -0.000183788 Jy ! Component: 150 - total flux cleaned = -0.000238257 Jy ! Component: 200 - total flux cleaned = -0.000239719 Jy ! Total flux subtracted in 200 components = -0.000239719 Jy ! Clean residual min=-0.005283 max=0.005034 Jy/beam ! Clean residual mean=0.000024 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.223764 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.223764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160993Jy sigma=0.000653 ! Fit after self-cal, rms=0.160998Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160998Jy sigma=0.000653 ! Fit after self-cal, rms=0.164934Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=20.26 mas, bpa=-0.4099 degrees ! Estimated noise=2370.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218704 Jy ! Component: 100 - total flux cleaned = -0.00245258 Jy ! Component: 150 - total flux cleaned = -0.00250211 Jy ! Component: 200 - total flux cleaned = -0.00250069 Jy ! Total flux subtracted in 200 components = -0.00250069 Jy ! Clean residual min=-0.005557 max=0.005956 Jy/beam ! Clean residual mean=0.000041 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.221263 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 121 components and 0.221263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164964Jy sigma=0.000653 ! Fit after self-cal, rms=0.164976Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.68128e-05 Jy ! Component: 100 - total flux cleaned = -7.31601e-05 Jy ! Component: 150 - total flux cleaned = -0.000106502 Jy ! Component: 200 - total flux cleaned = -0.000138459 Jy ! Total flux subtracted in 200 components = -0.000138459 Jy ! Clean residual min=-0.005537 max=0.005957 Jy/beam ! Clean residual mean=0.000041 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.221125 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 125 components and 0.221125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165000Jy sigma=0.000653 ! Fit after self-cal, rms=0.164989Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=10.08 mas, bpa=2.68 degrees ! Estimated noise=1955.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 10.08 at 2.68 degrees (North through East) ! Clean map min=-0.005061 max=0.16477 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=8.699 mas, bpa=2.909 degrees ! Estimated noise=2422.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140486 Jy ! Component: 100 - total flux cleaned = 0.173896 Jy ! Component: 150 - total flux cleaned = 0.18918 Jy ! Component: 200 - total flux cleaned = 0.198442 Jy ! Total flux subtracted in 200 components = 0.198442 Jy ! Clean residual min=-0.006882 max=0.008156 Jy/beam ! Clean residual mean=-0.000012 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.198442 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.198442 Jy ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=10.08 mas, bpa=2.68 degrees ! Estimated noise=1955.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102989 Jy ! Component: 100 - total flux cleaned = 0.0162946 Jy ! Component: 150 - total flux cleaned = 0.0200775 Jy ! Component: 200 - total flux cleaned = 0.0216021 Jy ! Total flux subtracted in 200 components = 0.0216021 Jy ! Clean residual min=-0.005176 max=0.005136 Jy/beam ! Clean residual mean=0.000015 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.220044 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 61 components and 0.220044 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=20.26 mas, bpa=-0.4099 degrees ! Estimated noise=2370.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017876 Jy ! Component: 100 - total flux cleaned = 0.00187157 Jy ! Component: 150 - total flux cleaned = 0.00201289 Jy ! Component: 200 - total flux cleaned = 0.00213589 Jy ! Total flux subtracted in 200 components = 0.00213589 Jy ! Clean residual min=-0.005286 max=0.006239 Jy/beam ! Clean residual mean=0.000038 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.22218 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107664 Jy ! Component: 100 - total flux cleaned = 0.00020363 Jy ! Component: 150 - total flux cleaned = 0.000247207 Jy ! Component: 200 - total flux cleaned = 0.00028863 Jy ! Total flux subtracted in 200 components = 0.00028863 Jy ! Clean residual min=-0.005265 max=0.006221 Jy/beam ! Clean residual mean=0.000040 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.222468 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 0.222468 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=10.08 mas, bpa=2.68 degrees ! Estimated noise=1955.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421332 Jy ! Component: 100 - total flux cleaned = 0.000723527 Jy ! Component: 150 - total flux cleaned = 0.000991423 Jy ! Component: 200 - total flux cleaned = 0.00113993 Jy ! Total flux subtracted in 200 components = 0.00113993 Jy ! Clean residual min=-0.004903 max=0.005054 Jy/beam ! Clean residual mean=0.000023 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.223608 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.223608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164699Jy sigma=0.000652 ! Fit after self-cal, rms=0.164574Jy sigma=0.000652 wmodel J0236-2953_S_2017_06_15_pus_map.mod ! Writing 117 model components to file: J0236-2953_S_2017_06_15_pus_map.mod wobs J0236-2953_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_06_15_pus_uvs.fits wwins J0236-2953_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J0236-2953_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018359 Jy ! Component: 100 - total flux cleaned = -0.000184033 Jy ! Component: 150 - total flux cleaned = -0.00050492 Jy ! Component: 200 - total flux cleaned = -0.000733018 Jy ! Component: 250 - total flux cleaned = -0.00109951 Jy ! Component: 300 - total flux cleaned = -0.00138389 Jy ! Component: 350 - total flux cleaned = -0.00145192 Jy ! Component: 400 - total flux cleaned = -0.00165541 Jy ! Component: 450 - total flux cleaned = -0.00185282 Jy ! Component: 500 - total flux cleaned = -0.00198225 Jy ! Component: 550 - total flux cleaned = -0.00216916 Jy ! Component: 600 - total flux cleaned = -0.00216873 Jy ! Component: 650 - total flux cleaned = -0.00240786 Jy ! Component: 700 - total flux cleaned = -0.00240735 Jy ! Component: 750 - total flux cleaned = -0.00217666 Jy ! Component: 800 - total flux cleaned = -0.00195144 Jy ! Component: 850 - total flux cleaned = -0.00167499 Jy ! Component: 900 - total flux cleaned = -0.00145743 Jy ! Component: 950 - total flux cleaned = -0.00124357 Jy ! Component: 1000 - total flux cleaned = -0.00108554 Jy ! Component: 1050 - total flux cleaned = -0.000826662 Jy ! Component: 1100 - total flux cleaned = -0.000674304 Jy ! Component: 1150 - total flux cleaned = -0.000373354 Jy ! Component: 1200 - total flux cleaned = -0.000225911 Jy ! Component: 1250 - total flux cleaned = -0.000275051 Jy ! Component: 1300 - total flux cleaned = -0.000178554 Jy ! Component: 1350 - total flux cleaned = 5.82141e-05 Jy ! Component: 1400 - total flux cleaned = 1.12141e-05 Jy ! Component: 1450 - total flux cleaned = 5.8056e-05 Jy ! Component: 1500 - total flux cleaned = 0.000195732 Jy ! Component: 1550 - total flux cleaned = 0.000330636 Jy ! Component: 1600 - total flux cleaned = 0.000552104 Jy ! Component: 1650 - total flux cleaned = 0.000639859 Jy ! Component: 1700 - total flux cleaned = 0.000855724 Jy ! Component: 1750 - total flux cleaned = 0.000856585 Jy ! Component: 1800 - total flux cleaned = 0.00115204 Jy ! Component: 1850 - total flux cleaned = 0.00119321 Jy ! Component: 1900 - total flux cleaned = 0.00119268 Jy ! Component: 1950 - total flux cleaned = 0.0012742 Jy ! Component: 2000 - total flux cleaned = 0.00131518 Jy ! Component: 2050 - total flux cleaned = 0.00143493 Jy ! Component: 2100 - total flux cleaned = 0.00155342 Jy ! Component: 2150 - total flux cleaned = 0.00151438 Jy ! Component: 2200 - total flux cleaned = 0.00159192 Jy ! Component: 2250 - total flux cleaned = 0.00155356 Jy ! Component: 2300 - total flux cleaned = 0.0017439 Jy ! Component: 2350 - total flux cleaned = 0.00174345 Jy ! Component: 2400 - total flux cleaned = 0.00174326 Jy ! Component: 2450 - total flux cleaned = 0.0017431 Jy ! Component: 2500 - total flux cleaned = 0.00185339 Jy ! Component: 2550 - total flux cleaned = 0.00181685 Jy ! Component: 2600 - total flux cleaned = 0.00174479 Jy ! Component: 2650 - total flux cleaned = 0.0019237 Jy ! Component: 2700 - total flux cleaned = 0.00188846 Jy ! Component: 2750 - total flux cleaned = 0.0017835 Jy ! Component: 2800 - total flux cleaned = 0.0018185 Jy ! Component: 2850 - total flux cleaned = 0.00185296 Jy ! Component: 2900 - total flux cleaned = 0.00188726 Jy ! Component: 2950 - total flux cleaned = 0.00181869 Jy ! Component: 3000 - total flux cleaned = 0.0018521 Jy ! Component: 3050 - total flux cleaned = 0.00178471 Jy ! Component: 3100 - total flux cleaned = 0.00171794 Jy ! Component: 3150 - total flux cleaned = 0.00165161 Jy ! Component: 3200 - total flux cleaned = 0.00158592 Jy ! Component: 3250 - total flux cleaned = 0.00161881 Jy ! Component: 3300 - total flux cleaned = 0.00158635 Jy ! Component: 3350 - total flux cleaned = 0.00155416 Jy ! Component: 3400 - total flux cleaned = 0.00152173 Jy ! Component: 3450 - total flux cleaned = 0.00139427 Jy ! Component: 3500 - total flux cleaned = 0.00148912 Jy ! Component: 3550 - total flux cleaned = 0.00142631 Jy ! Component: 3600 - total flux cleaned = 0.00142641 Jy ! Component: 3650 - total flux cleaned = 0.00136427 Jy ! Component: 3700 - total flux cleaned = 0.00130252 Jy ! Component: 3750 - total flux cleaned = 0.00133342 Jy ! Component: 3800 - total flux cleaned = 0.00133305 Jy ! Component: 3850 - total flux cleaned = 0.00121194 Jy ! Component: 3900 - total flux cleaned = 0.00115163 Jy ! Component: 3950 - total flux cleaned = 0.00121156 Jy ! Component: 4000 - total flux cleaned = 0.0011817 Jy ! Component: 4050 - total flux cleaned = 0.0010634 Jy ! Total flux subtracted in 4096 components = 0.00106351 Jy ! Clean residual min=-0.002063 max=0.001750 Jy/beam ! Clean residual mean=0.000013 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.224672 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 430 components and 0.224672 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 10.08 at 2.68 degrees (North through East) ! Clean map min=-0.0041461 max=0.17176 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.171759 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000566955 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.990261 0.990261 1.98052 3.96104 7.92208 15.8442 31.6883 63.3767 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.171 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 10.08 at 2.68 degrees (North through East) ! Clean map min=-0.0041461 max=0.17176 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:09:49 2019