! Started logfile: J0236-2953_S_2017_06_10_pus_uvs.log on Mon May 6 14:43:30 2019 obs J0236-2953_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_06_10_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.625071 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 4388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.827778Jy sigma=0.005889 ! Fit after self-cal, rms=0.810197Jy sigma=0.005783 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.426 mas, bmaj=7.647 mas, bpa=-1.753 degrees ! Estimated noise=2172.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150886 Jy ! Component: 100 - total flux cleaned = 0.185515 Jy ! Total flux subtracted in 100 components = 0.185515 Jy ! Clean residual min=-0.009834 max=0.023802 Jy/beam ! Clean residual mean=-0.000095 rms=0.003061 Jy/beam ! Combined flux in latest and established models = 0.185515 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.185515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112318Jy sigma=0.000763 ! Fit after self-cal, rms=0.112321Jy sigma=0.000763 ! Inverting map ! Added new window around map position (6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208687 Jy ! Component: 100 - total flux cleaned = 0.0272464 Jy ! Total flux subtracted in 100 components = 0.0272464 Jy ! Clean residual min=-0.008957 max=0.019349 Jy/beam ! Clean residual mean=-0.000062 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.212762 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.212762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108169Jy sigma=0.000729 ! Fit after self-cal, rms=0.107714Jy sigma=0.000724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=8.905 mas, bpa=-1.754 degrees ! Estimated noise=1724.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172936 Jy ! Component: 100 - total flux cleaned = 0.0270929 Jy ! Component: 150 - total flux cleaned = 0.0293872 Jy ! Component: 200 - total flux cleaned = 0.0303551 Jy ! Total flux subtracted in 200 components = 0.0303551 Jy ! Clean residual min=-0.007183 max=0.009239 Jy/beam ! Clean residual mean=-0.000045 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.243117 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 50 components and 0.243117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104457Jy sigma=0.000701 ! Fit after self-cal, rms=0.104474Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.34 KP 1.03 ! LA 1.02 MK 1.02 NL 1.00* OV 0.96 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.13 KP 0.98 ! LA 0.97 MK 1.05 NL 1.09 OV 0.97 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.19 KP 0.99 ! LA 0.95 MK 1.05 NL 1.00 OV 0.84 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.08 KP 1.00* ! LA 1.01 MK 0.97 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.104474Jy sigma=0.000701 ! Fit after self-cal, rms=0.109578Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=8.903 mas, bpa=-1.176 degrees ! Estimated noise=1741.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00340111 Jy ! Component: 100 - total flux cleaned = -0.00391682 Jy ! Component: 150 - total flux cleaned = -0.00408179 Jy ! Component: 200 - total flux cleaned = -0.00421619 Jy ! Total flux subtracted in 200 components = -0.00421619 Jy ! Clean residual min=-0.005546 max=0.005822 Jy/beam ! Clean residual mean=-0.000022 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.238901 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.238901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108980Jy sigma=0.000685 ! Fit after self-cal, rms=0.109023Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109023Jy sigma=0.000685 ! Fit after self-cal, rms=0.112231Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=8.91 mas, bpa=-1.246 degrees ! Estimated noise=1741.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135578 Jy ! Component: 100 - total flux cleaned = -0.00158032 Jy ! Component: 150 - total flux cleaned = -0.00170883 Jy ! Component: 200 - total flux cleaned = -0.00187187 Jy ! Total flux subtracted in 200 components = -0.00187187 Jy ! Clean residual min=-0.004325 max=0.004186 Jy/beam ! Clean residual mean=-0.000011 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.237029 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.237029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112120Jy sigma=0.000678 ! Fit after self-cal, rms=0.112161Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497595 Jy ! Component: 100 - total flux cleaned = -0.000447782 Jy ! Component: 150 - total flux cleaned = -0.000404707 Jy ! Component: 200 - total flux cleaned = -0.000406502 Jy ! Total flux subtracted in 200 components = -0.000406502 Jy ! Clean residual min=-0.004298 max=0.004157 Jy/beam ! Clean residual mean=-0.000012 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.236622 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 0.236622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112118Jy sigma=0.000677 ! Fit after self-cal, rms=0.112107Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112107Jy sigma=0.000677 ! Fit after self-cal, rms=0.116457Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=8.894 mas, bpa=-1.184 degrees ! Estimated noise=1743.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143096 Jy ! Component: 100 - total flux cleaned = -0.00154928 Jy ! Component: 150 - total flux cleaned = -0.00160072 Jy ! Component: 200 - total flux cleaned = -0.00169306 Jy ! Total flux subtracted in 200 components = -0.00169306 Jy ! Clean residual min=-0.004154 max=0.004017 Jy/beam ! Clean residual mean=-0.000014 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.234929 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.234929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116398Jy sigma=0.000673 ! Fit after self-cal, rms=0.116412Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401604 Jy ! Component: 100 - total flux cleaned = -0.000271754 Jy ! Component: 150 - total flux cleaned = -0.00023198 Jy ! Component: 200 - total flux cleaned = -0.000197309 Jy ! Total flux subtracted in 200 components = -0.000197309 Jy ! Clean residual min=-0.004131 max=0.003983 Jy/beam ! Clean residual mean=-0.000014 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.234732 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.234732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116390Jy sigma=0.000673 ! Fit after self-cal, rms=0.116384Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116384Jy sigma=0.000673 ! Fit after self-cal, rms=0.117755Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.916 mas, bmaj=22.52 mas, bpa=1.463 degrees ! Estimated noise=2181.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703129 Jy ! Component: 100 - total flux cleaned = -0.000648344 Jy ! Component: 150 - total flux cleaned = -0.000622759 Jy ! Component: 200 - total flux cleaned = -0.00057418 Jy ! Total flux subtracted in 200 components = -0.00057418 Jy ! Clean residual min=-0.004473 max=0.004378 Jy/beam ! Clean residual mean=-0.000024 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.234158 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 130 components and 0.234158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117742Jy sigma=0.000672 ! Fit after self-cal, rms=0.117744Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89336e-05 Jy ! Component: 100 - total flux cleaned = 6.58127e-05 Jy ! Component: 150 - total flux cleaned = 0.0001075 Jy ! Component: 200 - total flux cleaned = 0.000146335 Jy ! Total flux subtracted in 200 components = 0.000146335 Jy ! Clean residual min=-0.004398 max=0.004373 Jy/beam ! Clean residual mean=-0.000023 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.234304 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 134 components and 0.234304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117738Jy sigma=0.000672 ! Fit after self-cal, rms=0.117736Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.883 mas, bpa=-1.162 degrees ! Estimated noise=1740.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.987 x 8.883 at -1.162 degrees (North through East) ! Clean map min=-0.0072079 max=0.18796 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=7.573 mas, bpa=-0.8206 degrees ! Estimated noise=2227.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154183 Jy ! Component: 100 - total flux cleaned = 0.189307 Jy ! Component: 150 - total flux cleaned = 0.204301 Jy ! Component: 200 - total flux cleaned = 0.213608 Jy ! Total flux subtracted in 200 components = 0.213608 Jy ! Clean residual min=-0.006688 max=0.006967 Jy/beam ! Clean residual mean=-0.000047 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.213607 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.213607 Jy ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.883 mas, bpa=-1.162 degrees ! Estimated noise=1740.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00934949 Jy ! Component: 100 - total flux cleaned = 0.0152247 Jy ! Component: 150 - total flux cleaned = 0.0191679 Jy ! Component: 200 - total flux cleaned = 0.0204791 Jy ! Total flux subtracted in 200 components = 0.0204791 Jy ! Clean residual min=-0.004032 max=0.003919 Jy/beam ! Clean residual mean=-0.000007 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.234087 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 64 components and 0.234087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.916 mas, bmaj=22.52 mas, bpa=1.463 degrees ! Estimated noise=2181.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219 Jy ! Component: 100 - total flux cleaned = 0.00212609 Jy ! Component: 150 - total flux cleaned = 0.00200036 Jy ! Component: 200 - total flux cleaned = 0.00189413 Jy ! Total flux subtracted in 200 components = 0.00189413 Jy ! Clean residual min=-0.004139 max=0.004088 Jy/beam ! Clean residual mean=-0.000006 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.235981 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.95909e-05 Jy ! Component: 100 - total flux cleaned = -8.49756e-05 Jy ! Component: 150 - total flux cleaned = -8.38328e-05 Jy ! Component: 200 - total flux cleaned = -8.39752e-05 Jy ! Total flux subtracted in 200 components = -8.39752e-05 Jy ! Clean residual min=-0.004118 max=0.004106 Jy/beam ! Clean residual mean=-0.000008 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.235897 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.235897 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.883 mas, bpa=-1.162 degrees ! Estimated noise=1740.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434913 Jy ! Component: 100 - total flux cleaned = 0.000500878 Jy ! Component: 150 - total flux cleaned = 0.000443955 Jy ! Component: 200 - total flux cleaned = 0.000443577 Jy ! Total flux subtracted in 200 components = 0.000443577 Jy ! Clean residual min=-0.003516 max=0.003571 Jy/beam ! Clean residual mean=-0.000001 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.23634 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.23634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117769Jy sigma=0.000672 ! Fit after self-cal, rms=0.117711Jy sigma=0.000672 wmodel J0236-2953_S_2017_06_10_pus_map.mod ! Writing 102 model components to file: J0236-2953_S_2017_06_10_pus_map.mod wobs J0236-2953_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_06_10_pus_uvs.fits wwins J0236-2953_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J0236-2953_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275381 Jy ! Component: 100 - total flux cleaned = 0.000671848 Jy ! Component: 150 - total flux cleaned = 0.00111417 Jy ! Component: 200 - total flux cleaned = 0.00135828 Jy ! Component: 250 - total flux cleaned = 0.00147649 Jy ! Component: 300 - total flux cleaned = 0.00159097 Jy ! Component: 350 - total flux cleaned = 0.00181654 Jy ! Component: 400 - total flux cleaned = 0.00203663 Jy ! Component: 450 - total flux cleaned = 0.00241502 Jy ! Component: 500 - total flux cleaned = 0.00262593 Jy ! Component: 550 - total flux cleaned = 0.00293808 Jy ! Component: 600 - total flux cleaned = 0.00324311 Jy ! Component: 650 - total flux cleaned = 0.00349341 Jy ! Component: 700 - total flux cleaned = 0.00383713 Jy ! Component: 750 - total flux cleaned = 0.00403019 Jy ! Component: 800 - total flux cleaned = 0.0041726 Jy ! Component: 850 - total flux cleaned = 0.00421919 Jy ! Component: 900 - total flux cleaned = 0.0043575 Jy ! Component: 950 - total flux cleaned = 0.00449374 Jy ! Component: 1000 - total flux cleaned = 0.00471593 Jy ! Component: 1050 - total flux cleaned = 0.00489141 Jy ! Component: 1100 - total flux cleaned = 0.00493487 Jy ! Component: 1150 - total flux cleaned = 0.00506378 Jy ! Component: 1200 - total flux cleaned = 0.00527496 Jy ! Component: 1250 - total flux cleaned = 0.00539938 Jy ! Component: 1300 - total flux cleaned = 0.00544039 Jy ! Component: 1350 - total flux cleaned = 0.00560232 Jy ! Component: 1400 - total flux cleaned = 0.00568172 Jy ! Component: 1450 - total flux cleaned = 0.00568167 Jy ! Component: 1500 - total flux cleaned = 0.00572044 Jy ! Component: 1550 - total flux cleaned = 0.00575987 Jy ! Component: 1600 - total flux cleaned = 0.00572119 Jy ! Component: 1650 - total flux cleaned = 0.00579725 Jy ! Component: 1700 - total flux cleaned = 0.00583454 Jy ! Component: 1750 - total flux cleaned = 0.00576127 Jy ! Component: 1800 - total flux cleaned = 0.00583508 Jy ! Component: 1850 - total flux cleaned = 0.00605174 Jy ! Component: 1900 - total flux cleaned = 0.00605122 Jy ! Component: 1950 - total flux cleaned = 0.00605147 Jy ! Component: 2000 - total flux cleaned = 0.00626169 Jy ! Component: 2050 - total flux cleaned = 0.00622711 Jy ! Component: 2100 - total flux cleaned = 0.0063303 Jy ! Component: 2150 - total flux cleaned = 0.00646581 Jy ! Component: 2200 - total flux cleaned = 0.00643172 Jy ! Component: 2250 - total flux cleaned = 0.00643132 Jy ! Component: 2300 - total flux cleaned = 0.00653056 Jy ! Component: 2350 - total flux cleaned = 0.00656267 Jy ! Component: 2400 - total flux cleaned = 0.00665962 Jy ! Component: 2450 - total flux cleaned = 0.00669178 Jy ! Component: 2500 - total flux cleaned = 0.00675593 Jy ! Component: 2550 - total flux cleaned = 0.00685069 Jy ! Component: 2600 - total flux cleaned = 0.00685085 Jy ! Component: 2650 - total flux cleaned = 0.00678875 Jy ! Component: 2700 - total flux cleaned = 0.00682015 Jy ! Component: 2750 - total flux cleaned = 0.00675951 Jy ! Component: 2800 - total flux cleaned = 0.00681999 Jy ! Component: 2850 - total flux cleaned = 0.00691 Jy ! Component: 2900 - total flux cleaned = 0.00687997 Jy ! Component: 2950 - total flux cleaned = 0.00693904 Jy ! Component: 3000 - total flux cleaned = 0.00688027 Jy ! Component: 3050 - total flux cleaned = 0.006909 Jy ! Component: 3100 - total flux cleaned = 0.00693793 Jy ! Component: 3150 - total flux cleaned = 0.00690896 Jy ! Component: 3200 - total flux cleaned = 0.00670953 Jy ! Component: 3250 - total flux cleaned = 0.00682316 Jy ! Component: 3300 - total flux cleaned = 0.00687916 Jy ! Component: 3350 - total flux cleaned = 0.00679495 Jy ! Component: 3400 - total flux cleaned = 0.00671185 Jy ! Component: 3450 - total flux cleaned = 0.00676669 Jy ! Component: 3500 - total flux cleaned = 0.00682141 Jy ! Component: 3550 - total flux cleaned = 0.00671239 Jy ! Component: 3600 - total flux cleaned = 0.00679337 Jy ! Component: 3650 - total flux cleaned = 0.00671317 Jy ! Component: 3700 - total flux cleaned = 0.00673972 Jy ! Component: 3750 - total flux cleaned = 0.00673976 Jy ! Component: 3800 - total flux cleaned = 0.00668751 Jy ! Component: 3850 - total flux cleaned = 0.00676555 Jy ! Component: 3900 - total flux cleaned = 0.00668785 Jy ! Component: 3950 - total flux cleaned = 0.006688 Jy ! Component: 4000 - total flux cleaned = 0.00671351 Jy ! Component: 4050 - total flux cleaned = 0.00673858 Jy ! Total flux subtracted in 4096 components = 0.00663742 Jy ! Clean residual min=-0.001279 max=0.001515 Jy/beam ! Clean residual mean=0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.242978 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 397 components and 0.242978 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.987 x 8.883 at -1.162 degrees (North through East) ! Clean map min=-0.003132 max=0.18837 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.188365 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000466107 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.742346 0.742346 1.48469 2.96939 5.93877 11.8775 23.7551 47.5102 95.0203 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.987 x 8.883 at -1.162 degrees (North through East) ! Clean map min=-0.003132 max=0.18837 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:43:35 2019