! Started logfile: J0236-2953_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:35:43 2019 obs J0236-2953_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_05_31_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781197 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 5484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.822122Jy sigma=0.005237 ! Fit after self-cal, rms=0.807507Jy sigma=0.005180 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=7.398 mas, bpa=-1.996 degrees ! Estimated noise=2382.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155592 Jy ! Component: 100 - total flux cleaned = 0.191416 Jy ! Total flux subtracted in 100 components = 0.191416 Jy ! Clean residual min=-0.010195 max=0.016256 Jy/beam ! Clean residual mean=0.000004 rms=0.002872 Jy/beam ! Combined flux in latest and established models = 0.191416 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.191416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143424Jy sigma=0.000734 ! Fit after self-cal, rms=0.143401Jy sigma=0.000734 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.762 mas, bpa=-1.766 degrees ! Estimated noise=1803.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019038 Jy ! Component: 100 - total flux cleaned = 0.0282269 Jy ! Component: 150 - total flux cleaned = 0.0330128 Jy ! Component: 200 - total flux cleaned = 0.035526 Jy ! Total flux subtracted in 200 components = 0.035526 Jy ! Clean residual min=-0.009296 max=0.010597 Jy/beam ! Clean residual mean=0.000015 rms=0.002093 Jy/beam ! Combined flux in latest and established models = 0.226942 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.226942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141252Jy sigma=0.000712 ! Fit after self-cal, rms=0.141262Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.91 HN 1.37 KP 1.01 ! LA 0.96 MK 1.00 NL 0.99 OV 0.98 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.53 KP 0.95 ! LA 0.95 MK 0.96 NL 1.20 OV 1.08 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.49 KP 0.98 ! LA 0.98 MK 0.96 NL 1.10 OV 0.94 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.31 KP 0.92 ! LA 1.22 MK 1.10 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.141262Jy sigma=0.000712 ! Fit after self-cal, rms=0.143718Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=8.667 mas, bpa=-0.9682 degrees ! Estimated noise=1806.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213074 Jy ! Component: 100 - total flux cleaned = -0.00223255 Jy ! Component: 150 - total flux cleaned = -0.00232391 Jy ! Component: 200 - total flux cleaned = -0.0024758 Jy ! Total flux subtracted in 200 components = -0.0024758 Jy ! Clean residual min=-0.006839 max=0.006000 Jy/beam ! Clean residual mean=-0.000012 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.224466 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.224466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143461Jy sigma=0.000684 ! Fit after self-cal, rms=0.143882Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143882Jy sigma=0.000684 ! Fit after self-cal, rms=0.172786Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.7 mas, bpa=-0.9601 degrees ! Estimated noise=1813.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195331 Jy ! Component: 100 - total flux cleaned = 0.000149998 Jy ! Component: 150 - total flux cleaned = 0.000109011 Jy ! Component: 200 - total flux cleaned = 3.21935e-05 Jy ! Total flux subtracted in 200 components = 3.21935e-05 Jy ! Clean residual min=-0.004773 max=0.005389 Jy/beam ! Clean residual mean=-0.000011 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.224498 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.224498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172758Jy sigma=0.000672 ! Fit after self-cal, rms=0.173061Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (93.5, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281112 Jy ! Component: 100 - total flux cleaned = 0.00228331 Jy ! Component: 150 - total flux cleaned = 0.00184557 Jy ! Component: 200 - total flux cleaned = 0.00161789 Jy ! Total flux subtracted in 200 components = 0.00161789 Jy ! Clean residual min=-0.004746 max=0.004760 Jy/beam ! Clean residual mean=-0.000014 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.226116 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.226116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172744Jy sigma=0.000671 ! Fit after self-cal, rms=0.172717Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172717Jy sigma=0.000671 ! Fit after self-cal, rms=0.194003Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=8.712 mas, bpa=-1.075 degrees ! Estimated noise=1806.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000298032 Jy ! Component: 100 - total flux cleaned = -0.000435604 Jy ! Component: 150 - total flux cleaned = -0.000627132 Jy ! Component: 200 - total flux cleaned = -0.000803488 Jy ! Total flux subtracted in 200 components = -0.000803488 Jy ! Clean residual min=-0.005029 max=0.004881 Jy/beam ! Clean residual mean=-0.000010 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.225313 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.225313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193903Jy sigma=0.000669 ! Fit after self-cal, rms=0.194015Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230624 Jy ! Component: 100 - total flux cleaned = -0.000337263 Jy ! Component: 150 - total flux cleaned = -0.000438574 Jy ! Component: 200 - total flux cleaned = -0.00048618 Jy ! Total flux subtracted in 200 components = -0.00048618 Jy ! Clean residual min=-0.005097 max=0.004843 Jy/beam ! Clean residual mean=-0.000010 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.224827 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.224827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193949Jy sigma=0.000669 ! Fit after self-cal, rms=0.193942Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193942Jy sigma=0.000669 ! Fit after self-cal, rms=0.193888Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.584 mas, bmaj=23.18 mas, bpa=1.766 degrees ! Estimated noise=2224.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429114 Jy ! Component: 100 - total flux cleaned = -0.000492456 Jy ! Component: 150 - total flux cleaned = -0.000522352 Jy ! Component: 200 - total flux cleaned = -0.000581557 Jy ! Total flux subtracted in 200 components = -0.000581557 Jy ! Clean residual min=-0.004898 max=0.005421 Jy/beam ! Clean residual mean=-0.000015 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.224245 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 82 components and 0.224245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193865Jy sigma=0.000669 ! Fit after self-cal, rms=0.193887Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (75.5, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359373 Jy ! Component: 100 - total flux cleaned = 0.00339364 Jy ! Component: 150 - total flux cleaned = 0.00303345 Jy ! Component: 200 - total flux cleaned = 0.00271592 Jy ! Total flux subtracted in 200 components = 0.00271592 Jy ! Clean residual min=-0.004483 max=0.003605 Jy/beam ! Clean residual mean=-0.000040 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.226961 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.226961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193584Jy sigma=0.000668 ! Fit after self-cal, rms=0.193643Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=8.714 mas, bpa=-1.053 degrees ! Estimated noise=1806.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 8.714 at -1.053 degrees (North through East) ! Clean map min=-0.0044509 max=0.20068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=7.319 mas, bpa=-1.203 degrees ! Estimated noise=2419.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156812 Jy ! Component: 100 - total flux cleaned = 0.192256 Jy ! Component: 150 - total flux cleaned = 0.205212 Jy ! Component: 200 - total flux cleaned = 0.212238 Jy ! Total flux subtracted in 200 components = 0.212238 Jy ! Clean residual min=-0.006817 max=0.006575 Jy/beam ! Clean residual mean=-0.000014 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.212238 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.212238 Jy ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=8.714 mas, bpa=-1.053 degrees ! Estimated noise=1806.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846149 Jy ! Component: 100 - total flux cleaned = 0.0126726 Jy ! Component: 150 - total flux cleaned = 0.0139477 Jy ! Component: 200 - total flux cleaned = 0.0145174 Jy ! Total flux subtracted in 200 components = 0.0145174 Jy ! Clean residual min=-0.004498 max=0.004999 Jy/beam ! Clean residual mean=-0.000030 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.226755 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 63 components and 0.226755 Jy ! Inverting map ! Added new window around map position (63.5, -116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285281 Jy ! Component: 100 - total flux cleaned = 0.00324273 Jy ! Component: 150 - total flux cleaned = 0.00323471 Jy ! Component: 200 - total flux cleaned = 0.00334744 Jy ! Total flux subtracted in 200 components = 0.00334744 Jy ! Clean residual min=-0.004039 max=0.004278 Jy/beam ! Clean residual mean=-0.000024 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.230103 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 91 components and 0.230103 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.584 mas, bmaj=23.18 mas, bpa=1.766 degrees ! Estimated noise=2224.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161202 Jy ! Component: 100 - total flux cleaned = -0.000672103 Jy ! Component: 150 - total flux cleaned = -0.00107632 Jy ! Component: 200 - total flux cleaned = -0.00145731 Jy ! Total flux subtracted in 200 components = -0.00145731 Jy ! Clean residual min=-0.003977 max=0.003432 Jy/beam ! Clean residual mean=-0.000044 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.228645 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000428904 Jy ! Component: 100 - total flux cleaned = -0.00089649 Jy ! Component: 150 - total flux cleaned = -0.00133791 Jy ! Component: 200 - total flux cleaned = -0.00164156 Jy ! Total flux subtracted in 200 components = -0.00164156 Jy ! Clean residual min=-0.003863 max=0.003301 Jy/beam ! Clean residual mean=-0.000041 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.227004 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 124 components and 0.227004 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=8.714 mas, bpa=-1.053 degrees ! Estimated noise=1806.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889341 Jy ! Component: 100 - total flux cleaned = 0.00068346 Jy ! Component: 150 - total flux cleaned = 0.000588637 Jy ! Component: 200 - total flux cleaned = 0.000683401 Jy ! Total flux subtracted in 200 components = 0.000683401 Jy ! Clean residual min=-0.003622 max=0.003564 Jy/beam ! Clean residual mean=-0.000024 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.227687 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 147 components and 0.227687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193074Jy sigma=0.000666 ! Fit after self-cal, rms=0.193057Jy sigma=0.000666 wmodel J0236-2953_S_2017_05_31_pus_map.mod ! Writing 147 model components to file: J0236-2953_S_2017_05_31_pus_map.mod wobs J0236-2953_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_05_31_pus_uvs.fits wwins J0236-2953_S_2017_05_31_pus_map.win ! wwins: Wrote 5 windows to J0236-2953_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144721 Jy ! Component: 100 - total flux cleaned = -0.00267241 Jy ! Component: 150 - total flux cleaned = -0.00360073 Jy ! Component: 200 - total flux cleaned = -0.00431982 Jy ! Component: 250 - total flux cleaned = -0.00478475 Jy ! Component: 300 - total flux cleaned = -0.0052946 Jy ! Component: 350 - total flux cleaned = -0.00551696 Jy ! Component: 400 - total flux cleaned = -0.00611408 Jy ! Component: 450 - total flux cleaned = -0.00643337 Jy ! Component: 500 - total flux cleaned = -0.00695626 Jy ! Component: 550 - total flux cleaned = -0.0073164 Jy ! Component: 600 - total flux cleaned = -0.0077714 Jy ! Component: 650 - total flux cleaned = -0.00811917 Jy ! Component: 700 - total flux cleaned = -0.00846134 Jy ! Component: 750 - total flux cleaned = -0.00870188 Jy ! Component: 800 - total flux cleaned = -0.00893942 Jy ! Component: 850 - total flux cleaned = -0.00908073 Jy ! Component: 900 - total flux cleaned = -0.00935836 Jy ! Component: 950 - total flux cleaned = -0.0096318 Jy ! Component: 1000 - total flux cleaned = -0.00994601 Jy ! Component: 1050 - total flux cleaned = -0.0100343 Jy ! Component: 1100 - total flux cleaned = -0.0102977 Jy ! Component: 1150 - total flux cleaned = -0.0105571 Jy ! Component: 1200 - total flux cleaned = -0.0105999 Jy ! Component: 1250 - total flux cleaned = -0.0108126 Jy ! Component: 1300 - total flux cleaned = -0.0110652 Jy ! Component: 1350 - total flux cleaned = -0.0113561 Jy ! Component: 1400 - total flux cleaned = -0.0114804 Jy ! Component: 1450 - total flux cleaned = -0.0117663 Jy ! Component: 1500 - total flux cleaned = -0.0118878 Jy ! Component: 1550 - total flux cleaned = -0.0121296 Jy ! Component: 1600 - total flux cleaned = -0.012369 Jy ! Component: 1650 - total flux cleaned = -0.0125667 Jy ! Component: 1700 - total flux cleaned = -0.0126846 Jy ! Component: 1750 - total flux cleaned = -0.012957 Jy ! Component: 1800 - total flux cleaned = -0.0131889 Jy ! Component: 1850 - total flux cleaned = -0.0133425 Jy ! Component: 1900 - total flux cleaned = -0.0135331 Jy ! Component: 1950 - total flux cleaned = -0.0137971 Jy ! Component: 2000 - total flux cleaned = -0.0139096 Jy ! Component: 2050 - total flux cleaned = -0.0142068 Jy ! Component: 2100 - total flux cleaned = -0.0143913 Jy ! Component: 2150 - total flux cleaned = -0.0145013 Jy ! Component: 2200 - total flux cleaned = -0.0146104 Jy ! Component: 2250 - total flux cleaned = -0.0147912 Jy ! Component: 2300 - total flux cleaned = -0.0148271 Jy ! Component: 2350 - total flux cleaned = -0.0148984 Jy ! Component: 2400 - total flux cleaned = -0.0150754 Jy ! Component: 2450 - total flux cleaned = -0.0152507 Jy ! Component: 2500 - total flux cleaned = -0.0153204 Jy ! Component: 2550 - total flux cleaned = -0.0154242 Jy ! Component: 2600 - total flux cleaned = -0.015459 Jy ! Component: 2650 - total flux cleaned = -0.015596 Jy ! Component: 2700 - total flux cleaned = -0.0157322 Jy ! Component: 2750 - total flux cleaned = -0.0158671 Jy ! Component: 2800 - total flux cleaned = -0.0159007 Jy ! Component: 2850 - total flux cleaned = -0.0160001 Jy ! Component: 2900 - total flux cleaned = -0.0160661 Jy ! Component: 2950 - total flux cleaned = -0.0160662 Jy ! Component: 3000 - total flux cleaned = -0.0161968 Jy ! Component: 3050 - total flux cleaned = -0.0160997 Jy ! Component: 3100 - total flux cleaned = -0.0161967 Jy ! Component: 3150 - total flux cleaned = -0.0161648 Jy ! Component: 3200 - total flux cleaned = -0.016324 Jy ! Component: 3250 - total flux cleaned = -0.0162287 Jy ! Component: 3300 - total flux cleaned = -0.0163232 Jy ! Component: 3350 - total flux cleaned = -0.0163544 Jy ! Component: 3400 - total flux cleaned = -0.0163543 Jy ! Component: 3450 - total flux cleaned = -0.0162921 Jy ! Component: 3500 - total flux cleaned = -0.0162613 Jy ! Component: 3550 - total flux cleaned = -0.0162308 Jy ! Component: 3600 - total flux cleaned = -0.0162918 Jy ! Component: 3650 - total flux cleaned = -0.0162011 Jy ! Component: 3700 - total flux cleaned = -0.0162916 Jy ! Component: 3750 - total flux cleaned = -0.0162315 Jy ! Component: 3800 - total flux cleaned = -0.0161717 Jy ! Component: 3850 - total flux cleaned = -0.0161718 Jy ! Component: 3900 - total flux cleaned = -0.016231 Jy ! Component: 3950 - total flux cleaned = -0.016172 Jy ! Component: 4000 - total flux cleaned = -0.0162598 Jy ! Component: 4050 - total flux cleaned = -0.0162889 Jy ! Total flux subtracted in 4096 components = -0.0161726 Jy ! Clean residual min=-0.001682 max=0.002022 Jy/beam ! Clean residual mean=-0.000010 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.211515 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 427 components and 0.211515 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 8.714 at -1.053 degrees (North through East) ! Clean map min=-0.0034622 max=0.20199 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.201986 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000537068 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.797682 0.797682 1.59536 3.19073 6.38146 12.7629 25.5258 51.0517 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.201 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 8.714 at -1.053 degrees (North through East) ! Clean map min=-0.0034622 max=0.20199 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:35:52 2019