! Started logfile: J0236-2953_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:18 2019 obs J0236-2953_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_04_28_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779487 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819043Jy sigma=0.004650 ! Fit after self-cal, rms=0.796346Jy sigma=0.004471 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=7.34 mas, bpa=-9.844 degrees ! Estimated noise=4937.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165878 Jy ! Component: 100 - total flux cleaned = 0.205947 Jy ! Total flux subtracted in 100 components = 0.205947 Jy ! Clean residual min=-0.013968 max=0.020200 Jy/beam ! Clean residual mean=-0.000051 rms=0.004195 Jy/beam ! Combined flux in latest and established models = 0.205947 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.205947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133107Jy sigma=0.000685 ! Fit after self-cal, rms=0.133124Jy sigma=0.000684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.901 mas, bpa=-9.357 degrees ! Estimated noise=3317.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185272 Jy ! Component: 100 - total flux cleaned = 0.0274009 Jy ! Component: 150 - total flux cleaned = 0.0321219 Jy ! Component: 200 - total flux cleaned = 0.034943 Jy ! Total flux subtracted in 200 components = 0.034943 Jy ! Clean residual min=-0.009860 max=0.010753 Jy/beam ! Clean residual mean=-0.000027 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 0.24089 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 0.24089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130902Jy sigma=0.000669 ! Fit after self-cal, rms=0.130932Jy sigma=0.000669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.08 HN 1.12 KP 1.01 ! LA 1.09 MK 0.97 NL 0.90 OV 0.98 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.20 KP 0.95 ! LA 1.02 MK 1.11 NL 1.07 OV 1.01 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.15 KP 0.95 ! LA 1.07 MK 0.97 NL 1.02 OV 0.93 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.98 KP 1.00* ! LA 0.92 MK 1.01 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.130932Jy sigma=0.000669 ! Fit after self-cal, rms=0.133423Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.872 mas, bpa=-9.059 degrees ! Estimated noise=3339.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000936753 Jy ! Component: 100 - total flux cleaned = -0.00129233 Jy ! Component: 150 - total flux cleaned = -0.0015281 Jy ! Component: 200 - total flux cleaned = -0.00163451 Jy ! Total flux subtracted in 200 components = -0.00163451 Jy ! Clean residual min=-0.008667 max=0.007815 Jy/beam ! Clean residual mean=-0.000030 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.239256 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.239255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133340Jy sigma=0.000661 ! Fit after self-cal, rms=0.133437Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133437Jy sigma=0.000661 ! Fit after self-cal, rms=0.133536Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.859 mas, bpa=-9.046 degrees ! Estimated noise=3330.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000753446 Jy ! Component: 100 - total flux cleaned = -0.00111657 Jy ! Component: 150 - total flux cleaned = -0.00124892 Jy ! Component: 200 - total flux cleaned = -0.0013689 Jy ! Total flux subtracted in 200 components = -0.0013689 Jy ! Clean residual min=-0.008503 max=0.007720 Jy/beam ! Clean residual mean=-0.000030 rms=0.002139 Jy/beam ! Combined flux in latest and established models = 0.237887 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.237887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133486Jy sigma=0.000661 ! Fit after self-cal, rms=0.133504Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020942 Jy ! Component: 100 - total flux cleaned = -0.000282974 Jy ! Component: 150 - total flux cleaned = -0.000346429 Jy ! Component: 200 - total flux cleaned = -0.000434612 Jy ! Total flux subtracted in 200 components = -0.000434612 Jy ! Clean residual min=-0.008433 max=0.007691 Jy/beam ! Clean residual mean=-0.000030 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.237452 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.237452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133478Jy sigma=0.000661 ! Fit after self-cal, rms=0.133488Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133488Jy sigma=0.000661 ! Fit after self-cal, rms=0.133713Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.851 mas, bpa=-9.07 degrees ! Estimated noise=3326.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066342 Jy ! Component: 100 - total flux cleaned = -0.000876505 Jy ! Component: 150 - total flux cleaned = -0.00100009 Jy ! Component: 200 - total flux cleaned = -0.0010848 Jy ! Total flux subtracted in 200 components = -0.0010848 Jy ! Clean residual min=-0.008271 max=0.007658 Jy/beam ! Clean residual mean=-0.000029 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.236367 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.236367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133686Jy sigma=0.000661 ! Fit after self-cal, rms=0.133701Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015261 Jy ! Component: 100 - total flux cleaned = -0.000234749 Jy ! Component: 150 - total flux cleaned = -0.000257249 Jy ! Component: 200 - total flux cleaned = -0.000300797 Jy ! Total flux subtracted in 200 components = -0.000300797 Jy ! Clean residual min=-0.008215 max=0.007607 Jy/beam ! Clean residual mean=-0.000029 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.236066 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.236066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133685Jy sigma=0.000661 ! Fit after self-cal, rms=0.133693Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133693Jy sigma=0.000661 ! Fit after self-cal, rms=0.133929Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.428 mas, bmaj=18.51 mas, bpa=-2.985 degrees ! Estimated noise=4340.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000404023 Jy ! Component: 100 - total flux cleaned = -0.000480185 Jy ! Component: 150 - total flux cleaned = -0.00056005 Jy ! Component: 200 - total flux cleaned = -0.000626215 Jy ! Total flux subtracted in 200 components = -0.000626215 Jy ! Clean residual min=-0.008247 max=0.008208 Jy/beam ! Clean residual mean=-0.000063 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 0.23544 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.23544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133950Jy sigma=0.000661 ! Fit after self-cal, rms=0.133934Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.83785e-05 Jy ! Component: 100 - total flux cleaned = -9.70447e-05 Jy ! Component: 150 - total flux cleaned = -0.000139053 Jy ! Component: 200 - total flux cleaned = -0.000155587 Jy ! Total flux subtracted in 200 components = -0.000155587 Jy ! Clean residual min=-0.008233 max=0.008162 Jy/beam ! Clean residual mean=-0.000063 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.235285 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.235285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133957Jy sigma=0.000661 ! Fit after self-cal, rms=0.133939Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.845 mas, bpa=-9.088 degrees ! Estimated noise=3323.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 7.845 at -9.088 degrees (North through East) ! Clean map min=-0.0076531 max=0.20848 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=7.254 mas, bpa=-9.592 degrees ! Estimated noise=4925.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165382 Jy ! Component: 100 - total flux cleaned = 0.204919 Jy ! Component: 150 - total flux cleaned = 0.22007 Jy ! Component: 200 - total flux cleaned = 0.227184 Jy ! Total flux subtracted in 200 components = 0.227184 Jy ! Clean residual min=-0.011877 max=0.013357 Jy/beam ! Clean residual mean=-0.000041 rms=0.003340 Jy/beam ! Combined flux in latest and established models = 0.227184 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.227184 Jy ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.845 mas, bpa=-9.088 degrees ! Estimated noise=3323.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484126 Jy ! Component: 100 - total flux cleaned = 0.0061883 Jy ! Component: 150 - total flux cleaned = 0.00625734 Jy ! Component: 200 - total flux cleaned = 0.00631403 Jy ! Total flux subtracted in 200 components = 0.00631403 Jy ! Clean residual min=-0.007987 max=0.007893 Jy/beam ! Clean residual mean=-0.000028 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.233498 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.233498 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.428 mas, bmaj=18.51 mas, bpa=-2.985 degrees ! Estimated noise=4340.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145724 Jy ! Component: 100 - total flux cleaned = 0.00142015 Jy ! Component: 150 - total flux cleaned = 0.00141883 Jy ! Component: 200 - total flux cleaned = 0.0013933 Jy ! Total flux subtracted in 200 components = 0.0013933 Jy ! Clean residual min=-0.008161 max=0.008190 Jy/beam ! Clean residual mean=-0.000062 rms=0.002535 Jy/beam ! Combined flux in latest and established models = 0.234891 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92924e-07 Jy ! Component: 100 - total flux cleaned = -1.85534e-05 Jy ! Component: 150 - total flux cleaned = -2.00171e-05 Jy ! Component: 200 - total flux cleaned = -2.16757e-05 Jy ! Total flux subtracted in 200 components = -2.16757e-05 Jy ! Clean residual min=-0.008157 max=0.008219 Jy/beam ! Clean residual mean=-0.000062 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.234869 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.234869 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.845 mas, bpa=-9.088 degrees ! Estimated noise=3323.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013285 Jy ! Component: 100 - total flux cleaned = -0.000180323 Jy ! Component: 150 - total flux cleaned = -0.000315835 Jy ! Component: 200 - total flux cleaned = -0.000435818 Jy ! Total flux subtracted in 200 components = -0.000435818 Jy ! Clean residual min=-0.007802 max=0.007837 Jy/beam ! Clean residual mean=-0.000028 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 0.234434 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.234434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133951Jy sigma=0.000661 ! Fit after self-cal, rms=0.133938Jy sigma=0.000661 wmodel J0236-2953_S_2017_04_28_pus_map.mod ! Writing 55 model components to file: J0236-2953_S_2017_04_28_pus_map.mod wobs J0236-2953_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_04_28_pus_uvs.fits wwins J0236-2953_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0236-2953_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721575 Jy ! Component: 100 - total flux cleaned = 0.00099187 Jy ! Component: 150 - total flux cleaned = 0.00111938 Jy ! Component: 200 - total flux cleaned = 0.00124139 Jy ! Component: 250 - total flux cleaned = 0.00171009 Jy ! Component: 300 - total flux cleaned = 0.00182715 Jy ! Component: 350 - total flux cleaned = 0.0020446 Jy ! Component: 400 - total flux cleaned = 0.00225424 Jy ! Component: 450 - total flux cleaned = 0.00245469 Jy ! Component: 500 - total flux cleaned = 0.002845 Jy ! Component: 550 - total flux cleaned = 0.00274956 Jy ! Component: 600 - total flux cleaned = 0.00302359 Jy ! Component: 650 - total flux cleaned = 0.0027581 Jy ! Component: 700 - total flux cleaned = 0.00293656 Jy ! Component: 750 - total flux cleaned = 0.00336135 Jy ! Component: 800 - total flux cleaned = 0.00377254 Jy ! Component: 850 - total flux cleaned = 0.00409484 Jy ! Component: 900 - total flux cleaned = 0.00456755 Jy ! Component: 950 - total flux cleaned = 0.00510504 Jy ! Component: 1000 - total flux cleaned = 0.00540639 Jy ! Component: 1050 - total flux cleaned = 0.00599523 Jy ! Component: 1100 - total flux cleaned = 0.00649882 Jy ! Component: 1150 - total flux cleaned = 0.0065686 Jy ! Component: 1200 - total flux cleaned = 0.00677613 Jy ! Component: 1250 - total flux cleaned = 0.00691283 Jy ! Component: 1300 - total flux cleaned = 0.00697973 Jy ! Component: 1350 - total flux cleaned = 0.00691637 Jy ! Component: 1400 - total flux cleaned = 0.00717377 Jy ! Component: 1450 - total flux cleaned = 0.00717452 Jy ! Component: 1500 - total flux cleaned = 0.00729895 Jy ! Component: 1550 - total flux cleaned = 0.00729985 Jy ! Component: 1600 - total flux cleaned = 0.00742013 Jy ! Component: 1650 - total flux cleaned = 0.00741909 Jy ! Component: 1700 - total flux cleaned = 0.00730242 Jy ! Component: 1750 - total flux cleaned = 0.00747574 Jy ! Component: 1800 - total flux cleaned = 0.00758905 Jy ! Component: 1850 - total flux cleaned = 0.00764546 Jy ! Component: 1900 - total flux cleaned = 0.0077554 Jy ! Component: 1950 - total flux cleaned = 0.00780992 Jy ! Component: 2000 - total flux cleaned = 0.00786403 Jy ! Component: 2050 - total flux cleaned = 0.00797057 Jy ! Component: 2100 - total flux cleaned = 0.00797083 Jy ! Component: 2150 - total flux cleaned = 0.00786604 Jy ! Component: 2200 - total flux cleaned = 0.00791812 Jy ! Component: 2250 - total flux cleaned = 0.00817419 Jy ! Component: 2300 - total flux cleaned = 0.0082745 Jy ! Component: 2350 - total flux cleaned = 0.00832396 Jy ! Component: 2400 - total flux cleaned = 0.00837294 Jy ! Component: 2450 - total flux cleaned = 0.00851947 Jy ! Component: 2500 - total flux cleaned = 0.00861647 Jy ! Component: 2550 - total flux cleaned = 0.00856885 Jy ! Component: 2600 - total flux cleaned = 0.00880805 Jy ! Component: 2650 - total flux cleaned = 0.00890284 Jy ! Component: 2700 - total flux cleaned = 0.00899693 Jy ! Component: 2750 - total flux cleaned = 0.00923052 Jy ! Component: 2800 - total flux cleaned = 0.00946205 Jy ! Component: 2850 - total flux cleaned = 0.00978365 Jy ! Component: 2900 - total flux cleaned = 0.0100571 Jy ! Component: 2950 - total flux cleaned = 0.0103288 Jy ! Component: 3000 - total flux cleaned = 0.0105988 Jy ! Component: 3050 - total flux cleaned = 0.0108667 Jy ! Component: 3100 - total flux cleaned = 0.0110447 Jy ! Component: 3150 - total flux cleaned = 0.0113091 Jy ! Component: 3200 - total flux cleaned = 0.0114406 Jy ! Component: 3250 - total flux cleaned = 0.0116582 Jy ! Component: 3300 - total flux cleaned = 0.0118315 Jy ! Component: 3350 - total flux cleaned = 0.0121753 Jy ! Component: 3400 - total flux cleaned = 0.0123034 Jy ! Component: 3450 - total flux cleaned = 0.0126012 Jy ! Component: 3500 - total flux cleaned = 0.0127706 Jy ! Component: 3550 - total flux cleaned = 0.0129812 Jy ! Component: 3600 - total flux cleaned = 0.0132329 Jy ! Component: 3650 - total flux cleaned = 0.0133998 Jy ! Component: 3700 - total flux cleaned = 0.0136494 Jy ! Component: 3750 - total flux cleaned = 0.0138982 Jy ! Component: 3800 - total flux cleaned = 0.0140634 Jy ! Component: 3850 - total flux cleaned = 0.0143105 Jy ! Component: 3900 - total flux cleaned = 0.0144338 Jy ! Component: 3950 - total flux cleaned = 0.0145974 Jy ! Component: 4000 - total flux cleaned = 0.0148015 Jy ! Component: 4050 - total flux cleaned = 0.0148423 Jy ! Total flux subtracted in 4096 components = 0.0150863 Jy ! Clean residual min=-0.002624 max=0.002557 Jy/beam ! Clean residual mean=0.000002 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.24952 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 325 components and 0.24952 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 7.845 at -9.088 degrees (North through East) ! Clean map min=-0.0055824 max=0.20943 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.209425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000688331 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.986027 0.986027 1.97205 3.94411 7.88822 15.7764 31.5529 63.1058 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.209 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 7.845 at -9.088 degrees (North through East) ! Clean map min=-0.0055824 max=0.20943 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:15:23 2019