! Started logfile: J0236-2953_S_2017_03_23_pus_uvs.log on Mon May 13 09:45:56 2019 obs J0236-2953_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_03_23_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.317949 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.797428Jy sigma=0.004962 ! Fit after self-cal, rms=0.773767Jy sigma=0.004819 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=27.62 mas, bpa=-31.53 degrees ! Estimated noise=5118.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170237 Jy ! Component: 100 - total flux cleaned = 0.214406 Jy ! Total flux subtracted in 100 components = 0.214406 Jy ! Clean residual min=-0.017568 max=0.024221 Jy/beam ! Clean residual mean=-0.000123 rms=0.006231 Jy/beam ! Combined flux in latest and established models = 0.214406 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.214406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124976Jy sigma=0.000711 ! Fit after self-cal, rms=0.124925Jy sigma=0.000710 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=24.73 mas, bpa=-30.71 degrees ! Estimated noise=4443.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263003 Jy ! Component: 100 - total flux cleaned = 0.0340055 Jy ! Component: 150 - total flux cleaned = 0.0361761 Jy ! Component: 200 - total flux cleaned = 0.0366813 Jy ! Total flux subtracted in 200 components = 0.0366813 Jy ! Clean residual min=-0.014923 max=0.014337 Jy/beam ! Clean residual mean=0.000004 rms=0.004457 Jy/beam ! Combined flux in latest and established models = 0.251087 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 45 components and 0.251087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118708Jy sigma=0.000685 ! Fit after self-cal, rms=0.118672Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 1.00 ! LA 1.00 MK 1.02 NL 1.00* OV 1.00 ! PT 1.15 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00* KP 0.95 ! LA 0.99 MK 0.93 NL 1.00* OV 1.13 ! PT 1.12 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00* KP 0.87 ! LA 0.70 MK 0.98 NL 1.00* OV 0.99 ! PT 1.10 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* HN 1.00* KP 1.00* ! LA 0.80 MK 1.16 NL 1.00* OV 1.21 ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.118672Jy sigma=0.000684 ! Fit after self-cal, rms=0.107216Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=24.78 mas, bpa=-30.55 degrees ! Estimated noise=4417.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202982 Jy ! Component: 100 - total flux cleaned = -0.00302954 Jy ! Component: 150 - total flux cleaned = -0.00344077 Jy ! Component: 200 - total flux cleaned = -0.00353542 Jy ! Total flux subtracted in 200 components = -0.00353542 Jy ! Clean residual min=-0.007398 max=0.007226 Jy/beam ! Clean residual mean=0.000002 rms=0.001984 Jy/beam ! Combined flux in latest and established models = 0.247552 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.247552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106936Jy sigma=0.000641 ! Fit after self-cal, rms=0.107001Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107001Jy sigma=0.000640 ! Fit after self-cal, rms=0.106991Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=24.84 mas, bpa=-30.53 degrees ! Estimated noise=4411.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225818 Jy ! Component: 100 - total flux cleaned = -0.00257962 Jy ! Component: 150 - total flux cleaned = -0.00270948 Jy ! Component: 200 - total flux cleaned = -0.00276722 Jy ! Total flux subtracted in 200 components = -0.00276722 Jy ! Clean residual min=-0.006709 max=0.006561 Jy/beam ! Clean residual mean=0.000003 rms=0.001799 Jy/beam ! Combined flux in latest and established models = 0.244784 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.244784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106882Jy sigma=0.000639 ! Fit after self-cal, rms=0.106879Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.91969e-05 Jy ! Component: 100 - total flux cleaned = -9.38415e-05 Jy ! Component: 150 - total flux cleaned = -0.000185674 Jy ! Component: 200 - total flux cleaned = -0.000352922 Jy ! Total flux subtracted in 200 components = -0.000352922 Jy ! Clean residual min=-0.006431 max=0.006242 Jy/beam ! Clean residual mean=0.000004 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.244431 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.244431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106832Jy sigma=0.000639 ! Fit after self-cal, rms=0.106823Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106823Jy sigma=0.000639 ! Fit after self-cal, rms=0.106916Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=24.88 mas, bpa=-30.52 degrees ! Estimated noise=4410.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127765 Jy ! Component: 100 - total flux cleaned = -0.00176857 Jy ! Component: 150 - total flux cleaned = -0.0019114 Jy ! Component: 200 - total flux cleaned = -0.00197926 Jy ! Total flux subtracted in 200 components = -0.00197926 Jy ! Clean residual min=-0.006067 max=0.005910 Jy/beam ! Clean residual mean=0.000002 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.242452 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.242452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106881Jy sigma=0.000639 ! Fit after self-cal, rms=0.106881Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.53077e-05 Jy ! Component: 100 - total flux cleaned = -0.000167918 Jy ! Component: 150 - total flux cleaned = -0.000227507 Jy ! Component: 200 - total flux cleaned = -0.000284555 Jy ! Total flux subtracted in 200 components = -0.000284555 Jy ! Clean residual min=-0.006040 max=0.005816 Jy/beam ! Clean residual mean=0.000002 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.242168 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.242168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106862Jy sigma=0.000638 ! Fit after self-cal, rms=0.106858Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106858Jy sigma=0.000638 ! Fit after self-cal, rms=0.106915Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.88 mas, bmaj=25.37 mas, bpa=-15.58 degrees ! Estimated noise=5346.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114616 Jy ! Component: 100 - total flux cleaned = -0.00131936 Jy ! Component: 150 - total flux cleaned = -0.00137477 Jy ! Component: 200 - total flux cleaned = -0.00142458 Jy ! Total flux subtracted in 200 components = -0.00142458 Jy ! Clean residual min=-0.007238 max=0.004828 Jy/beam ! Clean residual mean=0.000000 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.240743 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.240743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106912Jy sigma=0.000638 ! Fit after self-cal, rms=0.106914Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103652 Jy ! Component: 100 - total flux cleaned = -0.000216292 Jy ! Component: 150 - total flux cleaned = -0.000277385 Jy ! Component: 200 - total flux cleaned = -0.000333351 Jy ! Total flux subtracted in 200 components = -0.000333351 Jy ! Clean residual min=-0.007086 max=0.004873 Jy/beam ! Clean residual mean=-0.000001 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.24041 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 0.24041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106910Jy sigma=0.000638 ! Fit after self-cal, rms=0.106908Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=24.92 mas, bpa=-30.51 degrees ! Estimated noise=4409.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 24.92 at -30.51 degrees (North through East) ! Clean map min=-0.0096328 max=0.22344 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=27.78 mas, bpa=-31.21 degrees ! Estimated noise=5078.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168477 Jy ! Component: 100 - total flux cleaned = 0.212353 Jy ! Component: 150 - total flux cleaned = 0.233951 Jy ! Component: 200 - total flux cleaned = 0.241818 Jy ! Total flux subtracted in 200 components = 0.241818 Jy ! Clean residual min=-0.009179 max=0.009146 Jy/beam ! Clean residual mean=-0.000027 rms=0.002845 Jy/beam ! Combined flux in latest and established models = 0.241818 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.241818 Jy ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=24.92 mas, bpa=-30.51 degrees ! Estimated noise=4409.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023843 Jy ! Component: 100 - total flux cleaned = 0.000654979 Jy ! Component: 150 - total flux cleaned = -0.00052132 Jy ! Component: 200 - total flux cleaned = -0.000964239 Jy ! Total flux subtracted in 200 components = -0.000964239 Jy ! Clean residual min=-0.007744 max=0.006628 Jy/beam ! Clean residual mean=-0.000000 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.240854 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 59 components and 0.240854 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.88 mas, bmaj=25.37 mas, bpa=-15.58 degrees ! Estimated noise=5346.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247807 Jy ! Component: 100 - total flux cleaned = -0.000243245 Jy ! Component: 150 - total flux cleaned = -0.000145936 Jy ! Component: 200 - total flux cleaned = -0.000227346 Jy ! Total flux subtracted in 200 components = -0.000227346 Jy ! Clean residual min=-0.008846 max=0.005611 Jy/beam ! Clean residual mean=-0.000001 rms=0.002041 Jy/beam ! Combined flux in latest and established models = 0.240627 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.35955e-07 Jy ! Component: 100 - total flux cleaned = -5.5356e-06 Jy ! Component: 150 - total flux cleaned = -7.48357e-05 Jy ! Component: 200 - total flux cleaned = -0.000135731 Jy ! Total flux subtracted in 200 components = -0.000135731 Jy ! Clean residual min=-0.008240 max=0.005302 Jy/beam ! Clean residual mean=-0.000001 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.240491 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 86 components and 0.240491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=24.92 mas, bpa=-30.51 degrees ! Estimated noise=4409.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459629 Jy ! Component: 100 - total flux cleaned = -0.00023904 Jy ! Component: 150 - total flux cleaned = -0.000113217 Jy ! Component: 200 - total flux cleaned = -2.68018e-06 Jy ! Total flux subtracted in 200 components = -2.68018e-06 Jy ! Clean residual min=-0.006311 max=0.005649 Jy/beam ! Clean residual mean=0.000001 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.240488 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.240488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106985Jy sigma=0.000639 ! Fit after self-cal, rms=0.106978Jy sigma=0.000639 wmodel J0236-2953_S_2017_03_23_pus_map.mod ! Writing 96 model components to file: J0236-2953_S_2017_03_23_pus_map.mod wobs J0236-2953_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_03_23_pus_uvs.fits wwins J0236-2953_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J0236-2953_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181407 Jy ! Component: 100 - total flux cleaned = -0.00258726 Jy ! Component: 150 - total flux cleaned = -0.00302125 Jy ! Component: 200 - total flux cleaned = -0.00334421 Jy ! Component: 250 - total flux cleaned = -0.00334447 Jy ! Component: 300 - total flux cleaned = -0.00355675 Jy ! Component: 350 - total flux cleaned = -0.00382417 Jy ! Component: 400 - total flux cleaned = -0.00421207 Jy ! Component: 450 - total flux cleaned = -0.00446096 Jy ! Component: 500 - total flux cleaned = -0.00475874 Jy ! Component: 550 - total flux cleaned = -0.00475922 Jy ! Component: 600 - total flux cleaned = -0.00481522 Jy ! Component: 650 - total flux cleaned = -0.00492455 Jy ! Component: 700 - total flux cleaned = -0.00508403 Jy ! Component: 750 - total flux cleaned = -0.00523892 Jy ! Component: 800 - total flux cleaned = -0.00523908 Jy ! Component: 850 - total flux cleaned = -0.00538789 Jy ! Component: 900 - total flux cleaned = -0.00543606 Jy ! Component: 950 - total flux cleaned = -0.00562627 Jy ! Component: 1000 - total flux cleaned = -0.00590598 Jy ! Component: 1050 - total flux cleaned = -0.00613565 Jy ! Component: 1100 - total flux cleaned = -0.00613537 Jy ! Component: 1150 - total flux cleaned = -0.00600074 Jy ! Component: 1200 - total flux cleaned = -0.00591122 Jy ! Component: 1250 - total flux cleaned = -0.00595606 Jy ! Component: 1300 - total flux cleaned = -0.00595669 Jy ! Component: 1350 - total flux cleaned = -0.0060018 Jy ! Component: 1400 - total flux cleaned = -0.00595654 Jy ! Component: 1450 - total flux cleaned = -0.00600229 Jy ! Component: 1500 - total flux cleaned = -0.00604822 Jy ! Component: 1550 - total flux cleaned = -0.00609494 Jy ! Component: 1600 - total flux cleaned = -0.00614182 Jy ! Component: 1650 - total flux cleaned = -0.00609501 Jy ! Component: 1700 - total flux cleaned = -0.00609508 Jy ! Component: 1750 - total flux cleaned = -0.00609506 Jy ! Component: 1800 - total flux cleaned = -0.00604704 Jy ! Component: 1850 - total flux cleaned = -0.00609525 Jy ! Component: 1900 - total flux cleaned = -0.00609529 Jy ! Component: 1950 - total flux cleaned = -0.00604536 Jy ! Component: 2000 - total flux cleaned = -0.00609489 Jy ! Component: 2050 - total flux cleaned = -0.00609457 Jy ! Component: 2100 - total flux cleaned = -0.00609423 Jy ! Component: 2150 - total flux cleaned = -0.00619924 Jy ! Component: 2200 - total flux cleaned = -0.00625224 Jy ! Component: 2250 - total flux cleaned = -0.00635953 Jy ! Component: 2300 - total flux cleaned = -0.00646905 Jy ! Component: 2350 - total flux cleaned = -0.00658065 Jy ! Component: 2400 - total flux cleaned = -0.00663638 Jy ! Component: 2450 - total flux cleaned = -0.00675126 Jy ! Component: 2500 - total flux cleaned = -0.00692506 Jy ! Component: 2550 - total flux cleaned = -0.00704405 Jy ! Component: 2600 - total flux cleaned = -0.00716442 Jy ! Component: 2650 - total flux cleaned = -0.00734793 Jy ! Component: 2700 - total flux cleaned = -0.00753437 Jy ! Component: 2750 - total flux cleaned = -0.0078516 Jy ! Component: 2800 - total flux cleaned = -0.00811059 Jy ! Component: 2850 - total flux cleaned = -0.00837481 Jy ! Component: 2900 - total flux cleaned = -0.00864371 Jy ! Component: 2950 - total flux cleaned = -0.00877967 Jy ! Component: 3000 - total flux cleaned = -0.00898818 Jy ! Component: 3050 - total flux cleaned = -0.00920076 Jy ! Component: 3100 - total flux cleaned = -0.00941738 Jy ! Component: 3150 - total flux cleaned = -0.009638 Jy ! Component: 3200 - total flux cleaned = -0.00993967 Jy ! Component: 3250 - total flux cleaned = -0.0100933 Jy ! Component: 3300 - total flux cleaned = -0.0103269 Jy ! Component: 3350 - total flux cleaned = -0.010646 Jy ! Component: 3400 - total flux cleaned = -0.0108097 Jy ! Component: 3450 - total flux cleaned = -0.011059 Jy ! Component: 3500 - total flux cleaned = -0.0112286 Jy ! Component: 3550 - total flux cleaned = -0.0115739 Jy ! Component: 3600 - total flux cleaned = -0.0117513 Jy ! Component: 3650 - total flux cleaned = -0.0122003 Jy ! Component: 3700 - total flux cleaned = -0.0124773 Jy ! Component: 3750 - total flux cleaned = -0.0128529 Jy ! Component: 3800 - total flux cleaned = -0.0130451 Jy ! Component: 3850 - total flux cleaned = -0.0133378 Jy ! Component: 3900 - total flux cleaned = -0.0137361 Jy ! Component: 3950 - total flux cleaned = -0.0140415 Jy ! Component: 4000 - total flux cleaned = -0.0145645 Jy ! Component: 4050 - total flux cleaned = -0.0148845 Jy ! Total flux subtracted in 4096 components = -0.0152095 Jy ! Clean residual min=-0.006160 max=0.005812 Jy/beam ! Clean residual mean=-0.000020 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.225279 Jy keep ! Adding 194 model components to the UV plane model. ! The established model now contains 290 components and 0.225279 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 24.92 at -30.51 degrees (North through East) ! Clean map min=-0.012782 max=0.21561 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.215611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00173718 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.4171 2.4171 4.83421 9.66842 19.3368 38.6737 77.3473 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0052 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 24.92 at -30.51 degrees (North through East) ! Clean map min=-0.012782 max=0.21561 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:46:02 2019