! Started logfile: J0236-2953_S_2017_02_24_pus_uvs.log on Sat May 4 11:16:07 2019 obs J0236-2953_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_02_24_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.803989 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 5644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.835194Jy sigma=0.030871 ! Fit after self-cal, rms=0.792131Jy sigma=0.030823 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=7.912 mas, bpa=-5.578 degrees ! Estimated noise=1985.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118994 Jy ! Component: 100 - total flux cleaned = 0.138823 Jy ! Total flux subtracted in 100 components = 0.138823 Jy ! Clean residual min=-0.042099 max=0.041286 Jy/beam ! Clean residual mean=-0.000012 rms=0.014940 Jy/beam ! Combined flux in latest and established models = 0.138823 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.138823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162602Jy sigma=0.004209 ! Fit after self-cal, rms=0.162561Jy sigma=0.004209 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=10.44 mas, bpa=-4.488 degrees ! Estimated noise=1093.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00568871 Jy ! Component: 100 - total flux cleaned = -0.00679852 Jy ! Component: 150 - total flux cleaned = -0.00774639 Jy ! Component: 200 - total flux cleaned = -0.00802934 Jy ! Total flux subtracted in 200 components = -0.00802934 Jy ! Clean residual min=-0.045108 max=0.042346 Jy/beam ! Clean residual mean=-0.000142 rms=0.014597 Jy/beam ! Combined flux in latest and established models = 0.130794 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 6 components and 0.130794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162348Jy sigma=0.004075 ! Fit after self-cal, rms=0.162285Jy sigma=0.004075 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.73 HN 0.99 KP 0.72 ! LA 0.73 MK 0.91 NL 0.79 OV 0.77 ! PT 0.75 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.74 HN 1.10 KP 0.69 ! LA 0.70 MK 0.97 NL 0.78 OV 0.79 ! PT 0.72 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.77 HN 1.10 KP 0.76 ! LA 0.73 MK 1.00 NL 0.88 OV 0.72 ! PT 0.73 SC 0.90 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.82 HN 0.88 KP 1.00* ! LA 32.84 MK 1.14 NL 1.00* OV 0.75 ! PT 0.75 SC 1.00* ! ! ! Fit before self-cal, rms=0.162285Jy sigma=0.004075 ! Fit after self-cal, rms=1.215445Jy sigma=0.000707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=9.284 mas, bpa=-3.263 degrees ! Estimated noise=1105.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752859 Jy ! Component: 100 - total flux cleaned = 0.00786346 Jy ! Component: 150 - total flux cleaned = 0.00784381 Jy ! Component: 200 - total flux cleaned = 0.00783188 Jy ! Total flux subtracted in 200 components = 0.00783188 Jy ! Clean residual min=-0.004669 max=0.004563 Jy/beam ! Clean residual mean=-0.000059 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.138626 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.138626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.214490Jy sigma=0.000704 ! Fit after self-cal, rms=1.215278Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.215278Jy sigma=0.000692 ! Fit after self-cal, rms=1.375970Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=9.351 mas, bpa=-2.529 degrees ! Estimated noise=1138.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428725 Jy ! Component: 100 - total flux cleaned = 0.00616039 Jy ! Component: 150 - total flux cleaned = 0.00709073 Jy ! Component: 200 - total flux cleaned = 0.007278 Jy ! Total flux subtracted in 200 components = 0.007278 Jy ! Clean residual min=-0.004120 max=0.003961 Jy/beam ! Clean residual mean=-0.000063 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.145904 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 0.145904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.375315Jy sigma=0.000684 ! Fit after self-cal, rms=1.375336Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.21407e-05 Jy ! Component: 100 - total flux cleaned = 0.000111612 Jy ! Component: 150 - total flux cleaned = 0.000130804 Jy ! Component: 200 - total flux cleaned = 0.000184261 Jy ! Total flux subtracted in 200 components = 0.000184261 Jy ! Clean residual min=-0.004133 max=0.003900 Jy/beam ! Clean residual mean=-0.000063 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.146088 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.146088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.375311Jy sigma=0.000683 ! Fit after self-cal, rms=1.375309Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.375309Jy sigma=0.000683 ! Fit after self-cal, rms=0.124572Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=9.328 mas, bpa=-2.685 degrees ! Estimated noise=1138.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618886 Jy ! Component: 100 - total flux cleaned = 0.000672986 Jy ! Component: 150 - total flux cleaned = 0.000717553 Jy ! Component: 200 - total flux cleaned = 0.000755716 Jy ! Total flux subtracted in 200 components = 0.000755716 Jy ! Clean residual min=-0.003115 max=0.002882 Jy/beam ! Clean residual mean=0.000001 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.146844 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.146844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124560Jy sigma=0.000641 ! Fit after self-cal, rms=0.124421Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.17065e-05 Jy ! Component: 100 - total flux cleaned = 0.000101696 Jy ! Component: 150 - total flux cleaned = 0.00011141 Jy ! Component: 200 - total flux cleaned = 0.000129673 Jy ! Total flux subtracted in 200 components = 0.000129673 Jy ! Clean residual min=-0.003096 max=0.002895 Jy/beam ! Clean residual mean=0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.146974 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.146974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124417Jy sigma=0.000640 ! Fit after self-cal, rms=0.124417Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124417Jy sigma=0.000640 ! Fit after self-cal, rms=0.124965Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.669 mas, bmaj=22.19 mas, bpa=6.921 degrees ! Estimated noise=1302.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805174 Jy ! Component: 100 - total flux cleaned = 0.000911266 Jy ! Component: 150 - total flux cleaned = 0.000902324 Jy ! Component: 200 - total flux cleaned = 0.000901938 Jy ! Total flux subtracted in 200 components = 0.000901938 Jy ! Clean residual min=-0.002796 max=0.003041 Jy/beam ! Clean residual mean=0.000004 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.147876 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 53 components and 0.147876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124953Jy sigma=0.000640 ! Fit after self-cal, rms=0.124954Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.67672e-05 Jy ! Component: 100 - total flux cleaned = 3.82855e-05 Jy ! Component: 150 - total flux cleaned = 2.13749e-05 Jy ! Component: 200 - total flux cleaned = -1.56176e-06 Jy ! Total flux subtracted in 200 components = -1.56176e-06 Jy ! Clean residual min=-0.002790 max=0.003032 Jy/beam ! Clean residual mean=0.000004 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.147874 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.147874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124951Jy sigma=0.000640 ! Fit after self-cal, rms=0.124952Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.307 mas, bpa=-2.768 degrees ! Estimated noise=1138.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 9.307 at -2.768 degrees (North through East) ! Clean map min=-0.0029711 max=0.1532 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.368 mas, bpa=-4.114 degrees ! Estimated noise=1980.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119494 Jy ! Component: 100 - total flux cleaned = 0.145551 Jy ! Component: 150 - total flux cleaned = 0.148132 Jy ! Component: 200 - total flux cleaned = 0.148174 Jy ! Total flux subtracted in 200 components = 0.148174 Jy ! Clean residual min=-0.005093 max=0.005102 Jy/beam ! Clean residual mean=0.000002 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.148174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.148174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.307 mas, bpa=-2.768 degrees ! Estimated noise=1138.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.0462e-05 Jy ! Component: 100 - total flux cleaned = -0.000132314 Jy ! Component: 150 - total flux cleaned = -0.000252635 Jy ! Component: 200 - total flux cleaned = -0.000328366 Jy ! Total flux subtracted in 200 components = -0.000328366 Jy ! Clean residual min=-0.003043 max=0.002917 Jy/beam ! Clean residual mean=0.000002 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.147846 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.147846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.669 mas, bmaj=22.19 mas, bpa=6.921 degrees ! Estimated noise=1302.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.10004e-05 Jy ! Component: 100 - total flux cleaned = 7.11734e-05 Jy ! Component: 150 - total flux cleaned = 7.06253e-05 Jy ! Component: 200 - total flux cleaned = 7.7077e-05 Jy ! Total flux subtracted in 200 components = 7.7077e-05 Jy ! Clean residual min=-0.002798 max=0.003075 Jy/beam ! Clean residual mean=0.000005 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.147923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10836e-07 Jy ! Component: 100 - total flux cleaned = 6.28165e-06 Jy ! Component: 150 - total flux cleaned = 1.25433e-05 Jy ! Component: 200 - total flux cleaned = 1.26532e-05 Jy ! Total flux subtracted in 200 components = 1.26532e-05 Jy ! Clean residual min=-0.002800 max=0.003081 Jy/beam ! Clean residual mean=0.000005 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.147935 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 16 components and 0.147935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.307 mas, bpa=-2.768 degrees ! Estimated noise=1138.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158559 Jy ! Component: 100 - total flux cleaned = -0.00021629 Jy ! Component: 150 - total flux cleaned = -0.00025022 Jy ! Component: 200 - total flux cleaned = -0.000248965 Jy ! Total flux subtracted in 200 components = -0.000248965 Jy ! Clean residual min=-0.003035 max=0.002904 Jy/beam ! Clean residual mean=0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.147686 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.147686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124988Jy sigma=0.000640 ! Fit after self-cal, rms=0.124964Jy sigma=0.000640 wmodel J0236-2953_S_2017_02_24_pus_map.mod ! Writing 23 model components to file: J0236-2953_S_2017_02_24_pus_map.mod wobs J0236-2953_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_02_24_pus_uvs.fits wwins J0236-2953_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J0236-2953_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247589 Jy ! Component: 100 - total flux cleaned = 0.000887001 Jy ! Component: 150 - total flux cleaned = 0.00158577 Jy ! Component: 200 - total flux cleaned = 0.00203297 Jy ! Component: 250 - total flux cleaned = 0.0025093 Jy ! Component: 300 - total flux cleaned = 0.00280476 Jy ! Component: 350 - total flux cleaned = 0.00309158 Jy ! Component: 400 - total flux cleaned = 0.00333318 Jy ! Component: 450 - total flux cleaned = 0.00368825 Jy ! Component: 500 - total flux cleaned = 0.00391915 Jy ! Component: 550 - total flux cleaned = 0.00403216 Jy ! Component: 600 - total flux cleaned = 0.00410559 Jy ! Component: 650 - total flux cleaned = 0.00421438 Jy ! Component: 700 - total flux cleaned = 0.004142 Jy ! Component: 750 - total flux cleaned = 0.00431778 Jy ! Component: 800 - total flux cleaned = 0.00431675 Jy ! Component: 850 - total flux cleaned = 0.00438542 Jy ! Component: 900 - total flux cleaned = 0.00431753 Jy ! Component: 950 - total flux cleaned = 0.00445046 Jy ! Component: 1000 - total flux cleaned = 0.0044179 Jy ! Component: 1050 - total flux cleaned = 0.00451452 Jy ! Component: 1100 - total flux cleaned = 0.00451414 Jy ! Component: 1150 - total flux cleaned = 0.00457652 Jy ! Component: 1200 - total flux cleaned = 0.00454524 Jy ! Component: 1250 - total flux cleaned = 0.00454558 Jy ! Component: 1300 - total flux cleaned = 0.00454619 Jy ! Component: 1350 - total flux cleaned = 0.00451641 Jy ! Component: 1400 - total flux cleaned = 0.00442818 Jy ! Component: 1450 - total flux cleaned = 0.00439917 Jy ! Component: 1500 - total flux cleaned = 0.00431258 Jy ! Component: 1550 - total flux cleaned = 0.00419863 Jy ! Component: 1600 - total flux cleaned = 0.00417072 Jy ! Component: 1650 - total flux cleaned = 0.00408745 Jy ! Component: 1700 - total flux cleaned = 0.00419782 Jy ! Component: 1750 - total flux cleaned = 0.00417068 Jy ! Component: 1800 - total flux cleaned = 0.00414328 Jy ! Component: 1850 - total flux cleaned = 0.00414284 Jy ! Component: 1900 - total flux cleaned = 0.00408955 Jy ! Component: 1950 - total flux cleaned = 0.0040366 Jy ! Component: 2000 - total flux cleaned = 0.00403674 Jy ! Component: 2050 - total flux cleaned = 0.00398486 Jy ! Component: 2100 - total flux cleaned = 0.0039588 Jy ! Component: 2150 - total flux cleaned = 0.0037803 Jy ! Component: 2200 - total flux cleaned = 0.00372985 Jy ! Component: 2250 - total flux cleaned = 0.0036298 Jy ! Component: 2300 - total flux cleaned = 0.00355513 Jy ! Component: 2350 - total flux cleaned = 0.00345633 Jy ! Component: 2400 - total flux cleaned = 0.00335844 Jy ! Component: 2450 - total flux cleaned = 0.00330983 Jy ! Component: 2500 - total flux cleaned = 0.00323726 Jy ! Component: 2550 - total flux cleaned = 0.00318937 Jy ! Component: 2600 - total flux cleaned = 0.00307027 Jy ! Component: 2650 - total flux cleaned = 0.00281063 Jy ! Component: 2700 - total flux cleaned = 0.00269359 Jy ! Component: 2750 - total flux cleaned = 0.00264717 Jy ! Component: 2800 - total flux cleaned = 0.00260106 Jy ! Component: 2850 - total flux cleaned = 0.002486 Jy ! Component: 2900 - total flux cleaned = 0.00241742 Jy ! Component: 2950 - total flux cleaned = 0.00219099 Jy ! Component: 3000 - total flux cleaned = 0.00207871 Jy ! Component: 3050 - total flux cleaned = 0.00203422 Jy ! Component: 3100 - total flux cleaned = 0.00194516 Jy ! Component: 3150 - total flux cleaned = 0.0017688 Jy ! Component: 3200 - total flux cleaned = 0.0016591 Jy ! Component: 3250 - total flux cleaned = 0.00161574 Jy ! Component: 3300 - total flux cleaned = 0.00144239 Jy ! Component: 3350 - total flux cleaned = 0.0013564 Jy ! Component: 3400 - total flux cleaned = 0.0012707 Jy ! Component: 3450 - total flux cleaned = 0.00116455 Jy ! Component: 3500 - total flux cleaned = 0.00112228 Jy ! Component: 3550 - total flux cleaned = 0.000996217 Jy ! Component: 3600 - total flux cleaned = 0.000912732 Jy ! Component: 3650 - total flux cleaned = 0.000850567 Jy ! Component: 3700 - total flux cleaned = 0.000788556 Jy ! Component: 3750 - total flux cleaned = 0.000706332 Jy ! Component: 3800 - total flux cleaned = 0.000583696 Jy ! Component: 3850 - total flux cleaned = 0.000502474 Jy ! Component: 3900 - total flux cleaned = 0.000401348 Jy ! Component: 3950 - total flux cleaned = 0.000381123 Jy ! Component: 4000 - total flux cleaned = 0.000301201 Jy ! Component: 4050 - total flux cleaned = 0.00020167 Jy ! Total flux subtracted in 4096 components = 0.000162172 Jy ! Clean residual min=-0.001384 max=0.001147 Jy/beam ! Clean residual mean=-0.000008 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.147848 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 310 components and 0.147849 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 9.307 at -2.768 degrees (North through East) ! Clean map min=-0.0019248 max=0.15261 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000363578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714742 0.714742 1.42948 2.85897 5.71794 11.4359 22.8718 45.7435 91.487 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 9.307 at -2.768 degrees (North through East) ! Clean map min=-0.0019248 max=0.15261 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:16:11 2019