! Started logfile: J0236-2953_S_2017_01_21_pus_uvs.log on Sun May 5 15:43:57 2019 obs J0236-2953_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0236-2953_S_2017_01_21_pus_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.61413 visibilities/baseline/integration-bin. ! Found source: J0236-2953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 4068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0236-2953_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819714Jy sigma=0.004690 ! Fit after self-cal, rms=0.795769Jy sigma=0.004605 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=8.737 mas, bpa=-0.07339 degrees ! Estimated noise=2707.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167444 Jy ! Component: 100 - total flux cleaned = 0.204363 Jy ! Total flux subtracted in 100 components = 0.204363 Jy ! Clean residual min=-0.010036 max=0.012677 Jy/beam ! Clean residual mean=-0.000017 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 0.204363 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.204363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130670Jy sigma=0.000673 ! Fit after self-cal, rms=0.130654Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=10.72 mas, bpa=0.3875 degrees ! Estimated noise=2067.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142306 Jy ! Component: 100 - total flux cleaned = 0.0206319 Jy ! Component: 150 - total flux cleaned = 0.0240057 Jy ! Component: 200 - total flux cleaned = 0.0246237 Jy ! Total flux subtracted in 200 components = 0.0246237 Jy ! Clean residual min=-0.007069 max=0.008765 Jy/beam ! Clean residual mean=0.000004 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.228987 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 26 components and 0.228987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129681Jy sigma=0.000660 ! Fit after self-cal, rms=0.129719Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.92 HN 1.09 LA 1.07 ! MK 1.01 NL 0.98 OV 0.97 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.90 HN 1.20 LA 1.09 ! MK 1.03 NL 1.00 OV 1.04 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.91 HN 1.10 LA 1.04 ! MK 1.06 NL 1.00 OV 0.93 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.95 HN 1.04 LA 1.02 ! MK 0.98 NL 1.00* OV 0.93 PT 1.03 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.129719Jy sigma=0.000660 ! Fit after self-cal, rms=0.136354Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=10.7 mas, bpa=0.9164 degrees ! Estimated noise=2069.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229601 Jy ! Component: 100 - total flux cleaned = 0.000284537 Jy ! Component: 150 - total flux cleaned = 0.000170884 Jy ! Component: 200 - total flux cleaned = 2.63474e-05 Jy ! Total flux subtracted in 200 components = 2.63474e-05 Jy ! Clean residual min=-0.005883 max=0.005514 Jy/beam ! Clean residual mean=-0.000024 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.229013 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.229013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136292Jy sigma=0.000651 ! Fit after self-cal, rms=0.136582Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136582Jy sigma=0.000651 ! Fit after self-cal, rms=0.137028Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=10.66 mas, bpa=1.003 degrees ! Estimated noise=2068.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73106e-05 Jy ! Component: 100 - total flux cleaned = 1.8771e-05 Jy ! Component: 150 - total flux cleaned = -1.91539e-05 Jy ! Component: 200 - total flux cleaned = -0.000132377 Jy ! Total flux subtracted in 200 components = -0.000132377 Jy ! Clean residual min=-0.005781 max=0.005488 Jy/beam ! Clean residual mean=-0.000025 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.228881 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.228881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136989Jy sigma=0.000650 ! Fit after self-cal, rms=0.136995Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294538 Jy ! Component: 100 - total flux cleaned = -0.00033542 Jy ! Component: 150 - total flux cleaned = -0.000398521 Jy ! Component: 200 - total flux cleaned = -0.000426807 Jy ! Total flux subtracted in 200 components = -0.000426807 Jy ! Clean residual min=-0.005670 max=0.005443 Jy/beam ! Clean residual mean=-0.000026 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.228454 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.228454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136974Jy sigma=0.000650 ! Fit after self-cal, rms=0.136972Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136972Jy sigma=0.000650 ! Fit after self-cal, rms=0.138903Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=10.64 mas, bpa=1.058 degrees ! Estimated noise=2067.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639422 Jy ! Component: 100 - total flux cleaned = 0.000637639 Jy ! Component: 150 - total flux cleaned = 0.000636832 Jy ! Component: 200 - total flux cleaned = 0.000608157 Jy ! Total flux subtracted in 200 components = 0.000608157 Jy ! Clean residual min=-0.005004 max=0.005096 Jy/beam ! Clean residual mean=0.000001 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.229062 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.229062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138879Jy sigma=0.000645 ! Fit after self-cal, rms=0.138946Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115584 Jy ! Component: 100 - total flux cleaned = 8.46974e-05 Jy ! Component: 150 - total flux cleaned = 5.68002e-05 Jy ! Component: 200 - total flux cleaned = 5.53498e-05 Jy ! Total flux subtracted in 200 components = 5.53498e-05 Jy ! Clean residual min=-0.004989 max=0.005066 Jy/beam ! Clean residual mean=0.000000 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.229117 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.229117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138930Jy sigma=0.000645 ! Fit after self-cal, rms=0.138929Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138929Jy sigma=0.000645 ! Fit after self-cal, rms=0.138963Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.853 mas, bmaj=23.58 mas, bpa=1.478 degrees ! Estimated noise=2457.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260885 Jy ! Component: 100 - total flux cleaned = 0.000228416 Jy ! Component: 150 - total flux cleaned = 0.00011021 Jy ! Component: 200 - total flux cleaned = 6.25737e-05 Jy ! Total flux subtracted in 200 components = 6.25737e-05 Jy ! Clean residual min=-0.004569 max=0.004628 Jy/beam ! Clean residual mean=0.000001 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.22918 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 72 components and 0.22918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138957Jy sigma=0.000645 ! Fit after self-cal, rms=0.138955Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127528 Jy ! Component: 100 - total flux cleaned = 0.000125085 Jy ! Component: 150 - total flux cleaned = 6.40587e-05 Jy ! Component: 200 - total flux cleaned = 1.23061e-05 Jy ! Total flux subtracted in 200 components = 1.23061e-05 Jy ! Clean residual min=-0.004557 max=0.004607 Jy/beam ! Clean residual mean=0.000001 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.229192 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 0.229192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138957Jy sigma=0.000645 ! Fit after self-cal, rms=0.138957Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.62 mas, bpa=1.032 degrees ! Estimated noise=2067.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 10.62 at 1.032 degrees (North through East) ! Clean map min=-0.0047852 max=0.21396 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=8.66 mas, bpa=0.6555 degrees ! Estimated noise=2712.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167488 Jy ! Component: 100 - total flux cleaned = 0.204455 Jy ! Component: 150 - total flux cleaned = 0.216282 Jy ! Component: 200 - total flux cleaned = 0.222243 Jy ! Total flux subtracted in 200 components = 0.222243 Jy ! Clean residual min=-0.008150 max=0.006467 Jy/beam ! Clean residual mean=-0.000004 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.222243 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.222243 Jy ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.62 mas, bpa=1.032 degrees ! Estimated noise=2067.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453611 Jy ! Component: 100 - total flux cleaned = 0.00511325 Jy ! Component: 150 - total flux cleaned = 0.00511997 Jy ! Component: 200 - total flux cleaned = 0.00521821 Jy ! Total flux subtracted in 200 components = 0.00521821 Jy ! Clean residual min=-0.004680 max=0.004643 Jy/beam ! Clean residual mean=-0.000006 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.227461 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.227461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.853 mas, bmaj=23.58 mas, bpa=1.478 degrees ! Estimated noise=2457.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222536 Jy ! Component: 100 - total flux cleaned = 0.000421624 Jy ! Component: 150 - total flux cleaned = 0.000315469 Jy ! Component: 200 - total flux cleaned = 0.000233077 Jy ! Total flux subtracted in 200 components = 0.000233077 Jy ! Clean residual min=-0.004495 max=0.004613 Jy/beam ! Clean residual mean=-0.000012 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.227694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100427 Jy ! Component: 100 - total flux cleaned = -0.000211464 Jy ! Component: 150 - total flux cleaned = -0.000271131 Jy ! Component: 200 - total flux cleaned = -0.000326341 Jy ! Total flux subtracted in 200 components = -0.000326341 Jy ! Clean residual min=-0.004476 max=0.004655 Jy/beam ! Clean residual mean=-0.000014 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.227368 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 94 components and 0.227368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.62 mas, bpa=1.032 degrees ! Estimated noise=2067.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000937557 Jy ! Component: 100 - total flux cleaned = -0.0010537 Jy ! Component: 150 - total flux cleaned = -0.00105179 Jy ! Component: 200 - total flux cleaned = -0.00110066 Jy ! Total flux subtracted in 200 components = -0.00110066 Jy ! Clean residual min=-0.004481 max=0.004578 Jy/beam ! Clean residual mean=-0.000010 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.226267 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.226267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138695Jy sigma=0.000644 ! Fit after self-cal, rms=0.138659Jy sigma=0.000644 wmodel J0236-2953_S_2017_01_21_pus_map.mod ! Writing 108 model components to file: J0236-2953_S_2017_01_21_pus_map.mod wobs J0236-2953_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0236-2953_S_2017_01_21_pus_uvs.fits wwins J0236-2953_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J0236-2953_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078147 Jy ! Component: 100 - total flux cleaned = 0.000461479 Jy ! Component: 150 - total flux cleaned = 8.19868e-05 Jy ! Component: 200 - total flux cleaned = -0.000428453 Jy ! Component: 250 - total flux cleaned = -0.000921015 Jy ! Component: 300 - total flux cleaned = -0.00180166 Jy ! Component: 350 - total flux cleaned = -0.00245831 Jy ! Component: 400 - total flux cleaned = -0.00297048 Jy ! Component: 450 - total flux cleaned = -0.0037162 Jy ! Component: 500 - total flux cleaned = -0.00408067 Jy ! Component: 550 - total flux cleaned = -0.00443591 Jy ! Component: 600 - total flux cleaned = -0.00466766 Jy ! Component: 650 - total flux cleaned = -0.0049513 Jy ! Component: 700 - total flux cleaned = -0.00517368 Jy ! Component: 750 - total flux cleaned = -0.00511965 Jy ! Component: 800 - total flux cleaned = -0.00522636 Jy ! Component: 850 - total flux cleaned = -0.00512034 Jy ! Component: 900 - total flux cleaned = -0.00517356 Jy ! Component: 950 - total flux cleaned = -0.00532641 Jy ! Component: 1000 - total flux cleaned = -0.00537607 Jy ! Component: 1050 - total flux cleaned = -0.00537615 Jy ! Component: 1100 - total flux cleaned = -0.00561994 Jy ! Component: 1150 - total flux cleaned = -0.00571562 Jy ! Component: 1200 - total flux cleaned = -0.00595204 Jy ! Component: 1250 - total flux cleaned = -0.00595085 Jy ! Component: 1300 - total flux cleaned = -0.00581314 Jy ! Component: 1350 - total flux cleaned = -0.00590416 Jy ! Component: 1400 - total flux cleaned = -0.0058598 Jy ! Component: 1450 - total flux cleaned = -0.00581588 Jy ! Component: 1500 - total flux cleaned = -0.00585922 Jy ! Component: 1550 - total flux cleaned = -0.00603023 Jy ! Component: 1600 - total flux cleaned = -0.00602972 Jy ! Component: 1650 - total flux cleaned = -0.00602956 Jy ! Component: 1700 - total flux cleaned = -0.00607102 Jy ! Component: 1750 - total flux cleaned = -0.00619315 Jy ! Component: 1800 - total flux cleaned = -0.00611151 Jy ! Component: 1850 - total flux cleaned = -0.00615212 Jy ! Component: 1900 - total flux cleaned = -0.00623102 Jy ! Component: 1950 - total flux cleaned = -0.00627009 Jy ! Component: 2000 - total flux cleaned = -0.00638554 Jy ! Component: 2050 - total flux cleaned = -0.00627068 Jy ! Component: 2100 - total flux cleaned = -0.0061955 Jy ! Component: 2150 - total flux cleaned = -0.00619621 Jy ! Component: 2200 - total flux cleaned = -0.00615915 Jy ! Component: 2250 - total flux cleaned = -0.00608587 Jy ! Component: 2300 - total flux cleaned = -0.00612213 Jy ! Component: 2350 - total flux cleaned = -0.00590631 Jy ! Component: 2400 - total flux cleaned = -0.00594224 Jy ! Component: 2450 - total flux cleaned = -0.00597761 Jy ! Component: 2500 - total flux cleaned = -0.00576671 Jy ! Component: 2550 - total flux cleaned = -0.00583645 Jy ! Component: 2600 - total flux cleaned = -0.00576738 Jy ! Component: 2650 - total flux cleaned = -0.00566502 Jy ! Component: 2700 - total flux cleaned = -0.00549584 Jy ! Component: 2750 - total flux cleaned = -0.00552978 Jy ! Component: 2800 - total flux cleaned = -0.00546312 Jy ! Component: 2850 - total flux cleaned = -0.00549607 Jy ! Component: 2900 - total flux cleaned = -0.00543034 Jy ! Component: 2950 - total flux cleaned = -0.00523472 Jy ! Component: 3000 - total flux cleaned = -0.00526683 Jy ! Component: 3050 - total flux cleaned = -0.00513829 Jy ! Component: 3100 - total flux cleaned = -0.00510665 Jy ! Component: 3150 - total flux cleaned = -0.00504346 Jy ! Component: 3200 - total flux cleaned = -0.00501171 Jy ! Component: 3250 - total flux cleaned = -0.00494892 Jy ! Component: 3300 - total flux cleaned = -0.00482467 Jy ! Component: 3350 - total flux cleaned = -0.0047016 Jy ! Component: 3400 - total flux cleaned = -0.00464055 Jy ! Component: 3450 - total flux cleaned = -0.0044584 Jy ! Component: 3500 - total flux cleaned = -0.00445835 Jy ! Component: 3550 - total flux cleaned = -0.00421906 Jy ! Component: 3600 - total flux cleaned = -0.00424897 Jy ! Component: 3650 - total flux cleaned = -0.00410132 Jy ! Component: 3700 - total flux cleaned = -0.00401316 Jy ! Component: 3750 - total flux cleaned = -0.00389667 Jy ! Component: 3800 - total flux cleaned = -0.00378112 Jy ! Component: 3850 - total flux cleaned = -0.00366577 Jy ! Component: 3900 - total flux cleaned = -0.00346542 Jy ! Component: 3950 - total flux cleaned = -0.00338006 Jy ! Component: 4000 - total flux cleaned = -0.00318226 Jy ! Component: 4050 - total flux cleaned = -0.00304176 Jy ! Total flux subtracted in 4096 components = -0.00293008 Jy ! Clean residual min=-0.001619 max=0.001463 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.223337 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 411 components and 0.223337 Jy ![Exited script file: muppet] wmap "J0236-2953_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 10.62 at 1.032 degrees (North through East) ! Clean map min=-0.0040351 max=0.21343 Jy/beam ! Writing clean map to FITS file: J0236-2953_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.21343 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000532693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.748759 0.748759 1.49752 2.99504 5.99007 11.9801 23.9603 47.9206 95.8412 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.213 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 10.62 at 1.032 degrees (North through East) ! Clean map min=-0.0040351 max=0.21343 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0236-2953_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:44:02 2019