! Started logfile: J0232-2839_S_2017_01_21_pus_uvs.log on Sun May 5 15:43:47 2019 obs J0232-2839_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0232-2839_S_2017_01_21_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.774854 visibilities/baseline/integration-bin. ! Found source: J0232-2839 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0232-2839_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955169Jy sigma=0.005923 ! Fit after self-cal, rms=0.912448Jy sigma=0.005731 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.429 mas, bpa=-2.139 degrees ! Estimated noise=2008.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747908 Jy ! Component: 100 - total flux cleaned = 0.0915034 Jy ! Total flux subtracted in 100 components = 0.0915034 Jy ! Clean residual min=-0.006274 max=0.006733 Jy/beam ! Clean residual mean=0.000006 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.0915034 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0915034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120333Jy sigma=0.000662 ! Fit after self-cal, rms=0.120198Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=7.624 mas, bpa=-3.761 degrees ! Estimated noise=1350.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421024 Jy ! Component: 100 - total flux cleaned = 0.00569934 Jy ! Component: 150 - total flux cleaned = 0.00589752 Jy ! Component: 200 - total flux cleaned = 0.00599922 Jy ! Total flux subtracted in 200 components = 0.00599922 Jy ! Clean residual min=-0.004599 max=0.005116 Jy/beam ! Clean residual mean=0.000021 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.0975027 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.0975027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120067Jy sigma=0.000661 ! Fit after self-cal, rms=0.120077Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.90 HN 0.98 LA 1.10 ! MK 0.95 NL 0.98 OV 1.00 PT 1.03 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.07 LA 0.95 ! MK 1.03 NL 1.15 OV 1.03 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.97 HN 1.16 LA 0.99 ! MK 1.06 NL 1.07 OV 0.95 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.89 HN 1.07 LA 0.82 ! MK 0.87 NL 1.00* OV 0.98 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.120077Jy sigma=0.000661 ! Fit after self-cal, rms=0.126728Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=7.63 mas, bpa=-3.923 degrees ! Estimated noise=1349.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314493 Jy ! Component: 100 - total flux cleaned = 0.000225741 Jy ! Component: 150 - total flux cleaned = 0.000209617 Jy ! Component: 200 - total flux cleaned = 0.000224315 Jy ! Total flux subtracted in 200 components = 0.000224315 Jy ! Clean residual min=-0.004209 max=0.003776 Jy/beam ! Clean residual mean=0.000025 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.097727 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.097727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126715Jy sigma=0.000657 ! Fit after self-cal, rms=0.127102Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127102Jy sigma=0.000657 ! Fit after self-cal, rms=0.135616Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.603 mas, bpa=-3.922 degrees ! Estimated noise=1357.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735458 Jy ! Component: 100 - total flux cleaned = 0.000736018 Jy ! Component: 150 - total flux cleaned = 0.000737327 Jy ! Component: 200 - total flux cleaned = 0.000722026 Jy ! Total flux subtracted in 200 components = 0.000722026 Jy ! Clean residual min=-0.003272 max=0.003244 Jy/beam ! Clean residual mean=0.000026 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.098449 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.098449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135601Jy sigma=0.000655 ! Fit after self-cal, rms=0.135778Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.84247e-05 Jy ! Component: 100 - total flux cleaned = 7.63985e-05 Jy ! Component: 150 - total flux cleaned = 7.50345e-05 Jy ! Component: 200 - total flux cleaned = 7.54899e-05 Jy ! Total flux subtracted in 200 components = 7.54899e-05 Jy ! Clean residual min=-0.003245 max=0.003205 Jy/beam ! Clean residual mean=0.000026 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0985245 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0985245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135767Jy sigma=0.000655 ! Fit after self-cal, rms=0.135783Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135783Jy sigma=0.000655 ! Fit after self-cal, rms=0.138758Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=7.579 mas, bpa=-3.901 degrees ! Estimated noise=1356.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317947 Jy ! Component: 100 - total flux cleaned = 0.00029913 Jy ! Component: 150 - total flux cleaned = 0.000269024 Jy ! Component: 200 - total flux cleaned = 0.000241846 Jy ! Total flux subtracted in 200 components = 0.000241846 Jy ! Clean residual min=-0.003078 max=0.003133 Jy/beam ! Clean residual mean=0.000024 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0987663 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0987663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138748Jy sigma=0.000655 ! Fit after self-cal, rms=0.138778Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.34024e-05 Jy ! Component: 100 - total flux cleaned = -9.06146e-06 Jy ! Component: 150 - total flux cleaned = -9.14061e-06 Jy ! Component: 200 - total flux cleaned = -3.1496e-05 Jy ! Total flux subtracted in 200 components = -3.1496e-05 Jy ! Clean residual min=-0.003056 max=0.003103 Jy/beam ! Clean residual mean=0.000024 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0987348 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.0987348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138770Jy sigma=0.000655 ! Fit after self-cal, rms=0.138774Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138774Jy sigma=0.000655 ! Fit after self-cal, rms=0.139323Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.843 mas, bmaj=20.51 mas, bpa=4.808 degrees ! Estimated noise=1733.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113762 Jy ! Component: 100 - total flux cleaned = 0.000114075 Jy ! Component: 150 - total flux cleaned = 8.94755e-05 Jy ! Component: 200 - total flux cleaned = 6.737e-05 Jy ! Total flux subtracted in 200 components = 6.737e-05 Jy ! Clean residual min=-0.003274 max=0.003080 Jy/beam ! Clean residual mean=0.000050 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.0988022 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0988022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139314Jy sigma=0.000655 ! Fit after self-cal, rms=0.139319Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28283e-05 Jy ! Component: 100 - total flux cleaned = -2.36073e-05 Jy ! Component: 150 - total flux cleaned = -2.40864e-05 Jy ! Component: 200 - total flux cleaned = -4.36559e-05 Jy ! Total flux subtracted in 200 components = -4.36559e-05 Jy ! Clean residual min=-0.003277 max=0.003063 Jy/beam ! Clean residual mean=0.000050 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.0987586 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0987586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139314Jy sigma=0.000655 ! Fit after self-cal, rms=0.139314Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.562 mas, bpa=-3.9 degrees ! Estimated noise=1355.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.562 at -3.9 degrees (North through East) ! Clean map min=-0.002937 max=0.094445 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.4 mas, bmaj=6.4 mas, bpa=-2.406 degrees ! Estimated noise=1991.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0739542 Jy ! Component: 100 - total flux cleaned = 0.0906526 Jy ! Component: 150 - total flux cleaned = 0.0970135 Jy ! Component: 200 - total flux cleaned = 0.0987682 Jy ! Total flux subtracted in 200 components = 0.0987682 Jy ! Clean residual min=-0.005438 max=0.004773 Jy/beam ! Clean residual mean=0.000015 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.0987682 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0987682 Jy ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.562 mas, bpa=-3.9 degrees ! Estimated noise=1355.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001646 Jy ! Component: 100 - total flux cleaned = 0.000163595 Jy ! Component: 150 - total flux cleaned = 0.000120493 Jy ! Component: 200 - total flux cleaned = 8.89422e-05 Jy ! Total flux subtracted in 200 components = 8.89422e-05 Jy ! Clean residual min=-0.003057 max=0.003232 Jy/beam ! Clean residual mean=0.000023 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0988572 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0988572 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.843 mas, bmaj=20.51 mas, bpa=4.808 degrees ! Estimated noise=1733.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121192 Jy ! Component: 100 - total flux cleaned = -0.000120268 Jy ! Component: 150 - total flux cleaned = -0.000120439 Jy ! Component: 200 - total flux cleaned = -0.000142045 Jy ! Total flux subtracted in 200 components = -0.000142045 Jy ! Clean residual min=-0.003281 max=0.003037 Jy/beam ! Clean residual mean=0.000049 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.0987151 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85802e-05 Jy ! Component: 100 - total flux cleaned = -3.58005e-05 Jy ! Component: 150 - total flux cleaned = -5.17154e-05 Jy ! Component: 200 - total flux cleaned = -6.61518e-05 Jy ! Total flux subtracted in 200 components = -6.61518e-05 Jy ! Clean residual min=-0.003270 max=0.003028 Jy/beam ! Clean residual mean=0.000049 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.098649 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.098649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.562 mas, bpa=-3.9 degrees ! Estimated noise=1355.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135711 Jy ! Component: 100 - total flux cleaned = 8.63027e-05 Jy ! Component: 150 - total flux cleaned = 6.71308e-05 Jy ! Component: 200 - total flux cleaned = 6.54572e-05 Jy ! Total flux subtracted in 200 components = 6.54572e-05 Jy ! Clean residual min=-0.003020 max=0.003066 Jy/beam ! Clean residual mean=0.000023 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0987144 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0987144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139308Jy sigma=0.000655 ! Fit after self-cal, rms=0.139295Jy sigma=0.000655 wmodel J0232-2839_S_2017_01_21_pus_map.mod ! Writing 43 model components to file: J0232-2839_S_2017_01_21_pus_map.mod wobs J0232-2839_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0232-2839_S_2017_01_21_pus_uvs.fits wwins J0232-2839_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0232-2839_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276931 Jy ! Component: 100 - total flux cleaned = 0.000593199 Jy ! Component: 150 - total flux cleaned = 0.000944371 Jy ! Component: 200 - total flux cleaned = 0.00127913 Jy ! Component: 250 - total flux cleaned = 0.00160133 Jy ! Component: 300 - total flux cleaned = 0.00182256 Jy ! Component: 350 - total flux cleaned = 0.00208056 Jy ! Component: 400 - total flux cleaned = 0.00228972 Jy ! Component: 450 - total flux cleaned = 0.00253416 Jy ! Component: 500 - total flux cleaned = 0.0028118 Jy ! Component: 550 - total flux cleaned = 0.00308219 Jy ! Component: 600 - total flux cleaned = 0.00342065 Jy ! Component: 650 - total flux cleaned = 0.00364072 Jy ! Component: 700 - total flux cleaned = 0.00378262 Jy ! Component: 750 - total flux cleaned = 0.00395874 Jy ! Component: 800 - total flux cleaned = 0.00406197 Jy ! Component: 850 - total flux cleaned = 0.00419644 Jy ! Component: 900 - total flux cleaned = 0.00432898 Jy ! Component: 950 - total flux cleaned = 0.00442567 Jy ! Component: 1000 - total flux cleaned = 0.00455331 Jy ! Component: 1050 - total flux cleaned = 0.00467844 Jy ! Component: 1100 - total flux cleaned = 0.00483316 Jy ! Component: 1150 - total flux cleaned = 0.00495549 Jy ! Component: 1200 - total flux cleaned = 0.00501599 Jy ! Component: 1250 - total flux cleaned = 0.00513511 Jy ! Component: 1300 - total flux cleaned = 0.00525149 Jy ! Component: 1350 - total flux cleaned = 0.00539607 Jy ! Component: 1400 - total flux cleaned = 0.00548165 Jy ! Component: 1450 - total flux cleaned = 0.00556633 Jy ! Component: 1500 - total flux cleaned = 0.00573298 Jy ! Component: 1550 - total flux cleaned = 0.00567885 Jy ! Component: 1600 - total flux cleaned = 0.00573305 Jy ! Component: 1650 - total flux cleaned = 0.00570628 Jy ! Component: 1700 - total flux cleaned = 0.00575909 Jy ! Component: 1750 - total flux cleaned = 0.00586333 Jy ! Component: 1800 - total flux cleaned = 0.00578561 Jy ! Component: 1850 - total flux cleaned = 0.00570889 Jy ! Component: 1900 - total flux cleaned = 0.00560754 Jy ! Component: 1950 - total flux cleaned = 0.00560782 Jy ! Component: 2000 - total flux cleaned = 0.00560777 Jy ! Component: 2050 - total flux cleaned = 0.00563232 Jy ! Component: 2100 - total flux cleaned = 0.00548622 Jy ! Component: 2150 - total flux cleaned = 0.00546235 Jy ! Component: 2200 - total flux cleaned = 0.00543847 Jy ! Component: 2250 - total flux cleaned = 0.00543846 Jy ! Component: 2300 - total flux cleaned = 0.00539155 Jy ! Component: 2350 - total flux cleaned = 0.00534487 Jy ! Component: 2400 - total flux cleaned = 0.00539106 Jy ! Component: 2450 - total flux cleaned = 0.00541344 Jy ! Component: 2500 - total flux cleaned = 0.00536795 Jy ! Component: 2550 - total flux cleaned = 0.00532314 Jy ! Component: 2600 - total flux cleaned = 0.00536784 Jy ! Component: 2650 - total flux cleaned = 0.00532359 Jy ! Component: 2700 - total flux cleaned = 0.00534571 Jy ! Component: 2750 - total flux cleaned = 0.00532404 Jy ! Component: 2800 - total flux cleaned = 0.00530274 Jy ! Component: 2850 - total flux cleaned = 0.00530285 Jy ! Component: 2900 - total flux cleaned = 0.00532424 Jy ! Component: 2950 - total flux cleaned = 0.00526104 Jy ! Component: 3000 - total flux cleaned = 0.00528216 Jy ! Component: 3050 - total flux cleaned = 0.00530311 Jy ! Component: 3100 - total flux cleaned = 0.00532375 Jy ! Component: 3150 - total flux cleaned = 0.00526252 Jy ! Component: 3200 - total flux cleaned = 0.0053032 Jy ! Component: 3250 - total flux cleaned = 0.00534373 Jy ! Component: 3300 - total flux cleaned = 0.0053638 Jy ! Component: 3350 - total flux cleaned = 0.0053239 Jy ! Component: 3400 - total flux cleaned = 0.00536338 Jy ! Component: 3450 - total flux cleaned = 0.0054422 Jy ! Component: 3500 - total flux cleaned = 0.00546195 Jy ! Component: 3550 - total flux cleaned = 0.00553964 Jy ! Component: 3600 - total flux cleaned = 0.00555898 Jy ! Component: 3650 - total flux cleaned = 0.00557809 Jy ! Component: 3700 - total flux cleaned = 0.00561631 Jy ! Component: 3750 - total flux cleaned = 0.00565417 Jy ! Component: 3800 - total flux cleaned = 0.00569164 Jy ! Component: 3850 - total flux cleaned = 0.00567276 Jy ! Component: 3900 - total flux cleaned = 0.00571004 Jy ! Component: 3950 - total flux cleaned = 0.00578406 Jy ! Component: 4000 - total flux cleaned = 0.00582059 Jy ! Component: 4050 - total flux cleaned = 0.00582037 Jy ! Total flux subtracted in 4096 components = 0.00580227 Jy ! Clean residual min=-0.001149 max=0.001118 Jy/beam ! Clean residual mean=0.000004 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.104517 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 306 components and 0.104517 Jy ![Exited script file: muppet] wmap "J0232-2839_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.562 at -3.9 degrees (North through East) ! Clean map min=-0.0018668 max=0.093998 Jy/beam ! Writing clean map to FITS file: J0232-2839_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0939981 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000318101 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01523 1.01523 2.03047 4.06094 8.12188 16.2438 32.4875 64.975 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.562 at -3.9 degrees (North through East) ! Clean map min=-0.0018668 max=0.093998 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0232-2839_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:43:52 2019