! Started logfile: J0231+1322_X_2017_08_12_pus_uvs.log on Fri May 10 15:18:06 2019 obs J0231+1322_X_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0231+1322_X_2017_08_12_pus_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.571631 visibilities/baseline/integration-bin. ! Found source: J0231+1322 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1049 lines of history. ! ! Reading 14508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0231+1322_X_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.668844Jy sigma=0.005803 ! Fit after self-cal, rms=0.655863Jy sigma=0.005703 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.6955 mas, bmaj=1.666 mas, bpa=-2.318 degrees ! Estimated noise=1041.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.767399 Jy ! Component: 100 - total flux cleaned = 1.14916 Jy ! Total flux subtracted in 100 components = 1.14916 Jy ! Clean residual min=-0.068321 max=0.196022 Jy/beam ! Clean residual mean=-0.000371 rms=0.021219 Jy/beam ! Combined flux in latest and established models = 1.14916 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.14916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.443024Jy sigma=0.003892 ! Fit after self-cal, rms=0.428766Jy sigma=0.003769 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250705 Jy ! Component: 100 - total flux cleaned = 0.382547 Jy ! Total flux subtracted in 100 components = 0.382547 Jy ! Clean residual min=-0.029791 max=0.080711 Jy/beam ! Clean residual mean=-0.000142 rms=0.008714 Jy/beam ! Combined flux in latest and established models = 1.5317 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 1.5317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189919Jy sigma=0.001656 ! Fit after self-cal, rms=0.179354Jy sigma=0.001566 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0918808 Jy ! Component: 100 - total flux cleaned = 0.141249 Jy ! Total flux subtracted in 100 components = 0.141249 Jy ! Clean residual min=-0.015453 max=0.025669 Jy/beam ! Clean residual mean=-0.000058 rms=0.004095 Jy/beam ! Combined flux in latest and established models = 1.67295 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 1.67295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113445Jy sigma=0.000956 ! Fit after self-cal, rms=0.111869Jy sigma=0.000941 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342033 Jy ! Component: 100 - total flux cleaned = 0.0559909 Jy ! Total flux subtracted in 100 components = 0.0559909 Jy ! Clean residual min=-0.011736 max=0.015084 Jy/beam ! Clean residual mean=-0.000030 rms=0.002958 Jy/beam ! Combined flux in latest and established models = 1.72894 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 1.72894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098447Jy sigma=0.000808 ! Fit after self-cal, rms=0.098228Jy sigma=0.000806 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8681 mas, bmaj=1.951 mas, bpa=-2.338 degrees ! Estimated noise=697.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189687 Jy ! Component: 100 - total flux cleaned = 0.0296558 Jy ! Component: 150 - total flux cleaned = 0.036242 Jy ! Component: 200 - total flux cleaned = 0.0403734 Jy ! Total flux subtracted in 200 components = 0.0403734 Jy ! Clean residual min=-0.009711 max=0.010644 Jy/beam ! Clean residual mean=-0.000014 rms=0.002304 Jy/beam ! Combined flux in latest and established models = 1.76932 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 1.76932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094752Jy sigma=0.000769 ! Fit after self-cal, rms=0.094729Jy sigma=0.000768 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.01 KP 1.02 ! LA 0.96 MK 0.95 NL 0.98 OV 0.99 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.04 ! LA 0.97 MK 0.96 NL 0.98 OV 0.99 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.98 KP 0.97 ! LA 0.99 MK 0.98 NL 0.98 OV 1.00 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.02 KP 1.01 ! LA 0.99 MK 0.99 NL 0.98 OV 0.99 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.98 KP 1.00 ! LA 0.98 MK 0.99 NL 0.99 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.01 KP 1.00 ! LA 0.99 MK 0.98 NL 0.99 OV 1.00 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.99 KP 1.01 ! LA 0.99 MK 0.98 NL 0.99 OV 1.00 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.00 KP 1.00 ! LA 0.98 MK 0.99 NL 0.99 OV 1.00 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 1.02 ! LA 1.00 MK 0.97 NL 0.99 OV 1.00 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 1.01 ! LA 1.01 MK 0.98 NL 1.00 OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.04 KP 1.02 ! LA 1.01 MK 1.00 NL 0.99 OV 1.01 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 0.99 ! LA 0.99 MK 0.98 NL 0.99 OV 1.01 ! PT 1.04 SC 1.05 ! ! ! Fit before self-cal, rms=0.094729Jy sigma=0.000768 ! Fit after self-cal, rms=0.087815Jy sigma=0.000710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8701 mas, bmaj=1.957 mas, bpa=-2.98 degrees ! Estimated noise=697.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102963 Jy ! Component: 100 - total flux cleaned = 0.0107071 Jy ! Component: 150 - total flux cleaned = 0.0103055 Jy ! Component: 200 - total flux cleaned = 0.0101222 Jy ! Total flux subtracted in 200 components = 0.0101222 Jy ! Clean residual min=-0.006118 max=0.007283 Jy/beam ! Clean residual mean=-0.000018 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 1.77944 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 1.77944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086109Jy sigma=0.000695 ! Fit after self-cal, rms=0.086022Jy sigma=0.000694 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086022Jy sigma=0.000694 ! Fit after self-cal, rms=0.082213Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.869 mas, bmaj=1.951 mas, bpa=-2.783 degrees ! Estimated noise=696.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498091 Jy ! Component: 100 - total flux cleaned = 0.0052503 Jy ! Component: 150 - total flux cleaned = 0.00560785 Jy ! Component: 200 - total flux cleaned = 0.00601307 Jy ! Total flux subtracted in 200 components = 0.00601307 Jy ! Clean residual min=-0.003539 max=0.004343 Jy/beam ! Clean residual mean=0.000013 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 1.78545 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 1.78545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081722Jy sigma=0.000659 ! Fit after self-cal, rms=0.081717Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255172 Jy ! Component: 100 - total flux cleaned = 0.00354547 Jy ! Component: 150 - total flux cleaned = 0.00392711 Jy ! Component: 200 - total flux cleaned = 0.00435618 Jy ! Total flux subtracted in 200 components = 0.00435618 Jy ! Clean residual min=-0.003416 max=0.002857 Jy/beam ! Clean residual mean=0.000016 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 1.78981 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 1.78981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081434Jy sigma=0.000656 ! Fit after self-cal, rms=0.081431Jy sigma=0.000656 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081431Jy sigma=0.000656 ! Fit after self-cal, rms=0.081345Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8701 mas, bmaj=1.952 mas, bpa=-2.772 degrees ! Estimated noise=697.556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158351 Jy ! Component: 100 - total flux cleaned = 0.00220183 Jy ! Component: 150 - total flux cleaned = 0.00275435 Jy ! Component: 200 - total flux cleaned = 0.00311439 Jy ! Total flux subtracted in 200 components = 0.00311439 Jy ! Clean residual min=-0.002871 max=0.002617 Jy/beam ! Clean residual mean=0.000014 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 1.79292 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 1.79292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081174Jy sigma=0.000653 ! Fit after self-cal, rms=0.081174Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291174 Jy ! Component: 100 - total flux cleaned = 0.00061057 Jy ! Component: 150 - total flux cleaned = 0.000850679 Jy ! Component: 200 - total flux cleaned = 0.000963511 Jy ! Total flux subtracted in 200 components = 0.000963511 Jy ! Clean residual min=-0.002771 max=0.002546 Jy/beam ! Clean residual mean=0.000015 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 1.79389 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 97 components and 1.79389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081085Jy sigma=0.000653 ! Fit after self-cal, rms=0.081086Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081086Jy sigma=0.000653 ! Fit after self-cal, rms=0.081123Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.136 mas, bmaj=2.977 mas, bpa=-0.3727 degrees ! Estimated noise=893.633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751311 Jy ! Component: 100 - total flux cleaned = 0.000868817 Jy ! Component: 150 - total flux cleaned = 0.00103944 Jy ! Component: 200 - total flux cleaned = 0.00110952 Jy ! Total flux subtracted in 200 components = 0.00110952 Jy ! Clean residual min=-0.002418 max=0.002436 Jy/beam ! Clean residual mean=0.000025 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 1.795 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 1.795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081109Jy sigma=0.000652 ! Fit after self-cal, rms=0.081108Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261559 Jy ! Component: 100 - total flux cleaned = 0.000291659 Jy ! Component: 150 - total flux cleaned = 0.000318137 Jy ! Component: 200 - total flux cleaned = 0.000342569 Jy ! Total flux subtracted in 200 components = 0.000342569 Jy ! Clean residual min=-0.002334 max=0.002406 Jy/beam ! Clean residual mean=0.000025 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 1.79534 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 130 components and 1.79534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081102Jy sigma=0.000652 ! Fit after self-cal, rms=0.081102Jy sigma=0.000652 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8709 mas, bmaj=1.953 mas, bpa=-2.771 degrees ! Estimated noise=698.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8709 x 1.953 at -2.771 degrees (North through East) ! Clean map min=-0.0025505 max=0.98533 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081102Jy sigma=0.000652 ! Fit after self-cal, rms=0.076135Jy sigma=0.000611 ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8709 mas, bmaj=1.953 mas, bpa=-2.795 degrees ! Estimated noise=697.874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492081 Jy ! Component: 100 - total flux cleaned = 0.000559393 Jy ! Component: 150 - total flux cleaned = 0.000683232 Jy ! Component: 200 - total flux cleaned = 0.000740857 Jy ! Total flux subtracted in 200 components = 0.000740857 Jy ! Clean residual min=-0.002483 max=0.002371 Jy/beam ! Clean residual mean=0.000010 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 1.79608 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 135 components and 1.79608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076029Jy sigma=0.000610 ! Fit after self-cal, rms=0.076031Jy sigma=0.000610 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.88735e-05 Jy ! Component: 100 - total flux cleaned = 0.000153652 Jy ! Component: 150 - total flux cleaned = 0.000202598 Jy ! Component: 200 - total flux cleaned = 0.000106719 Jy ! Total flux subtracted in 200 components = 0.000106719 Jy ! Clean residual min=-0.002401 max=0.002307 Jy/beam ! Clean residual mean=0.000010 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 1.79619 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 146 components and 1.79619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075966Jy sigma=0.000609 ! Fit after self-cal, rms=0.075968Jy sigma=0.000609 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075968Jy sigma=0.000609 ! Fit after self-cal, rms=0.075989Jy sigma=0.000609 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.6974 mas, bmaj=1.665 mas, bpa=-2.764 degrees ! Estimated noise=1044.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.798829 Jy ! Component: 100 - total flux cleaned = 1.18839 Jy ! Component: 150 - total flux cleaned = 1.39873 Jy ! Component: 200 - total flux cleaned = 1.5255 Jy ! Total flux subtracted in 200 components = 1.5255 Jy ! Clean residual min=-0.020038 max=0.065557 Jy/beam ! Clean residual mean=-0.000122 rms=0.006719 Jy/beam ! Combined flux in latest and established models = 1.5255 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.5255 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8715 mas, bmaj=1.953 mas, bpa=-2.79 degrees ! Estimated noise=698.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107005 Jy ! Component: 100 - total flux cleaned = 0.162552 Jy ! Component: 150 - total flux cleaned = 0.195094 Jy ! Component: 200 - total flux cleaned = 0.21666 Jy ! Total flux subtracted in 200 components = 0.21666 Jy ! Clean residual min=-0.005582 max=0.011690 Jy/beam ! Clean residual mean=-0.000033 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 1.74216 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 47 components and 1.74216 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146679 Jy ! Component: 100 - total flux cleaned = 0.0248862 Jy ! Component: 150 - total flux cleaned = 0.0321398 Jy ! Component: 200 - total flux cleaned = 0.0373916 Jy ! Total flux subtracted in 200 components = 0.0373916 Jy ! Clean residual min=-0.003449 max=0.003742 Jy/beam ! Clean residual mean=0.000000 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 1.77955 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 1.77955 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398799 Jy ! Component: 100 - total flux cleaned = 0.00585253 Jy ! Component: 150 - total flux cleaned = 0.00725906 Jy ! Component: 200 - total flux cleaned = 0.00819189 Jy ! Total flux subtracted in 200 components = 0.00819189 Jy ! Clean residual min=-0.002996 max=0.002569 Jy/beam ! Clean residual mean=0.000005 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 1.78774 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 1.78774 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.136 mas, bmaj=2.977 mas, bpa=-0.4487 degrees ! Estimated noise=893.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303662 Jy ! Component: 100 - total flux cleaned = 0.00418855 Jy ! Component: 150 - total flux cleaned = 0.00509332 Jy ! Component: 200 - total flux cleaned = 0.00566766 Jy ! Total flux subtracted in 200 components = 0.00566766 Jy ! Clean residual min=-0.002352 max=0.002346 Jy/beam ! Clean residual mean=0.000017 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 1.79341 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396046 Jy ! Component: 100 - total flux cleaned = 0.000625653 Jy ! Component: 150 - total flux cleaned = 0.00082994 Jy ! Component: 200 - total flux cleaned = 0.000986181 Jy ! Total flux subtracted in 200 components = 0.000986181 Jy ! Clean residual min=-0.002224 max=0.002276 Jy/beam ! Clean residual mean=0.000018 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 1.7944 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 121 components and 1.79439 Jy ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8715 mas, bmaj=1.953 mas, bpa=-2.79 degrees ! Estimated noise=698.103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010533 Jy ! Component: 100 - total flux cleaned = -0.00114939 Jy ! Component: 150 - total flux cleaned = -0.000978431 Jy ! Component: 200 - total flux cleaned = -0.000819078 Jy ! Total flux subtracted in 200 components = -0.000819078 Jy ! Clean residual min=-0.002623 max=0.002294 Jy/beam ! Clean residual mean=0.000008 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 1.79358 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 1.79358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076303Jy sigma=0.000611 ! Fit after self-cal, rms=0.075948Jy sigma=0.000608 wmodel J0231+1322_X_2017_08_12_pus_map.mod ! Writing 128 model components to file: J0231+1322_X_2017_08_12_pus_map.mod wobs J0231+1322_X_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0231+1322_X_2017_08_12_pus_uvs.fits wwins J0231+1322_X_2017_08_12_pus_map.win ! wwins: Wrote 5 windows to J0231+1322_X_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195058 Jy ! Component: 100 - total flux cleaned = 0.000315502 Jy ! Component: 150 - total flux cleaned = 0.000315263 Jy ! Component: 200 - total flux cleaned = 0.000241335 Jy ! Component: 250 - total flux cleaned = 9.86933e-05 Jy ! Component: 300 - total flux cleaned = -7.36984e-05 Jy ! Component: 350 - total flux cleaned = -0.000274971 Jy ! Component: 400 - total flux cleaned = -0.00057073 Jy ! Component: 450 - total flux cleaned = -0.000859905 Jy ! Component: 500 - total flux cleaned = -0.00104955 Jy ! Component: 550 - total flux cleaned = -0.00129783 Jy ! Component: 600 - total flux cleaned = -0.00154099 Jy ! Component: 650 - total flux cleaned = -0.00172014 Jy ! Component: 700 - total flux cleaned = -0.00189632 Jy ! Component: 750 - total flux cleaned = -0.00206993 Jy ! Component: 800 - total flux cleaned = -0.00221238 Jy ! Component: 850 - total flux cleaned = -0.00249169 Jy ! Component: 900 - total flux cleaned = -0.00268433 Jy ! Component: 950 - total flux cleaned = -0.00276554 Jy ! Component: 1000 - total flux cleaned = -0.00284657 Jy ! Component: 1050 - total flux cleaned = -0.0029527 Jy ! Component: 1100 - total flux cleaned = -0.00305752 Jy ! Component: 1150 - total flux cleaned = -0.00310912 Jy ! Component: 1200 - total flux cleaned = -0.00313483 Jy ! Component: 1250 - total flux cleaned = -0.00331236 Jy ! Component: 1300 - total flux cleaned = -0.00338726 Jy ! Component: 1350 - total flux cleaned = -0.00346161 Jy ! Component: 1400 - total flux cleaned = -0.00348649 Jy ! Component: 1450 - total flux cleaned = -0.00355944 Jy ! Component: 1500 - total flux cleaned = -0.00367958 Jy ! Component: 1550 - total flux cleaned = -0.00367991 Jy ! Component: 1600 - total flux cleaned = -0.00367992 Jy ! Component: 1650 - total flux cleaned = -0.00370363 Jy ! Component: 1700 - total flux cleaned = -0.00381906 Jy ! Component: 1750 - total flux cleaned = -0.00388766 Jy ! Component: 1800 - total flux cleaned = -0.00386513 Jy ! Component: 1850 - total flux cleaned = -0.00393247 Jy ! Component: 1900 - total flux cleaned = -0.00391038 Jy ! Component: 1950 - total flux cleaned = -0.00393282 Jy ! Component: 2000 - total flux cleaned = -0.00397604 Jy ! Total flux subtracted in 2048 components = -0.00395447 Jy ! Clean residual min=-0.001154 max=0.001414 Jy/beam ! Clean residual mean=0.000007 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 1.78962 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 265 components and 1.78962 Jy ![Exited script file: muppet] wmap "J0231+1322_X_2017_08_12_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8715 x 1.953 at -2.79 degrees (North through East) ! Clean map min=-0.0018517 max=0.9866 Jy/beam ! Writing clean map to FITS file: J0231+1322_X_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.986603 invert ! Inverting map ! Your choice of large map pixels excluded 0.126% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000403766 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122775 0.122775 0.245549 0.491098 0.982196 1.96439 3.92879 7.85757 15.7151 31.4303 62.8606 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.986 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8715 x 1.953 at -2.79 degrees (North through East) ! Clean map min=-0.0018517 max=0.9866 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0231+1322_X_2017_08_12_pus_uvs.log closed on Fri May 10 15:18:08 2019