! Started logfile: J0230+8141_S_2017_10_09_pus_uvs.log on Sun May 12 13:02:41 2019 obs J0230+8141_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0230+8141_S_2017_10_09_pus_uva.fits ! AN table 1: 353 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.644161 visibilities/baseline/integration-bin. ! Found source: J0230+8141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 32744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0230+8141_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 682 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 906 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 956 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1730 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974353Jy sigma=0.008235 ! Fit after self-cal, rms=0.944813Jy sigma=0.008007 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=3.714 mas, bpa=-16.8 degrees ! Estimated noise=1006.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409509 Jy ! Component: 100 - total flux cleaned = 0.0509439 Jy ! Total flux subtracted in 100 components = 0.0509439 Jy ! Clean residual min=-0.003855 max=0.004218 Jy/beam ! Clean residual mean=-0.000032 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.0509439 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0509439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087352Jy sigma=0.000662 ! Fit after self-cal, rms=0.086861Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.173 mas, bmaj=5.124 mas, bpa=-24.6 degrees ! Estimated noise=565.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948869 Jy ! Component: 100 - total flux cleaned = 0.0141608 Jy ! Component: 150 - total flux cleaned = 0.016647 Jy ! Component: 200 - total flux cleaned = 0.0179725 Jy ! Total flux subtracted in 200 components = 0.0179725 Jy ! Clean residual min=-0.004405 max=0.005133 Jy/beam ! Clean residual mean=-0.000072 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.0689164 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0689164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085780Jy sigma=0.000650 ! Fit after self-cal, rms=0.085650Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.08 HN 1.08 KP 1.07 ! LA 0.96 MK 1.03 NL 0.83 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 HN 1.08 KP 1.10 ! LA 0.90 MK 1.07 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.18 KP 1.08 ! LA 0.73 MK 1.03 NL 1.20 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 1.03 KP 1.00* ! LA 0.68 MK 1.03 NL 1.00* OV 1.00* ! PT 0.86 ! ! ! Fit before self-cal, rms=0.085650Jy sigma=0.000649 ! Fit after self-cal, rms=0.085246Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.255 mas, bmaj=5.208 mas, bpa=-26.38 degrees ! Estimated noise=575.113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003086 Jy ! Component: 100 - total flux cleaned = 0.000277297 Jy ! Component: 150 - total flux cleaned = 0.000249408 Jy ! Component: 200 - total flux cleaned = 0.000235937 Jy ! Total flux subtracted in 200 components = 0.000235937 Jy ! Clean residual min=-0.004034 max=0.004883 Jy/beam ! Clean residual mean=-0.000060 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.0691523 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0691523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085236Jy sigma=0.000646 ! Fit after self-cal, rms=0.085428Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085428Jy sigma=0.000645 ! Fit after self-cal, rms=0.088497Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.261 mas, bmaj=5.28 mas, bpa=-27.52 degrees ! Estimated noise=579.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28641e-05 Jy ! Component: 100 - total flux cleaned = -2.34523e-05 Jy ! Component: 150 - total flux cleaned = -3.65015e-05 Jy ! Component: 200 - total flux cleaned = -5.96775e-05 Jy ! Total flux subtracted in 200 components = -5.96775e-05 Jy ! Clean residual min=-0.003198 max=0.004291 Jy/beam ! Clean residual mean=-0.000033 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0690927 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0690927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088488Jy sigma=0.000641 ! Fit after self-cal, rms=0.088900Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.7878e-05 Jy ! Component: 100 - total flux cleaned = -0.000116275 Jy ! Component: 150 - total flux cleaned = -0.000115797 Jy ! Component: 200 - total flux cleaned = -0.000116254 Jy ! Total flux subtracted in 200 components = -0.000116254 Jy ! Clean residual min=-0.002964 max=0.003858 Jy/beam ! Clean residual mean=-0.000040 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0689764 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.0689764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088898Jy sigma=0.000640 ! Fit after self-cal, rms=0.088901Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088901Jy sigma=0.000640 ! Fit after self-cal, rms=0.092053Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.264 mas, bmaj=5.317 mas, bpa=-28.51 degrees ! Estimated noise=585.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449126 Jy ! Component: 100 - total flux cleaned = 0.000451076 Jy ! Component: 150 - total flux cleaned = 0.000452577 Jy ! Component: 200 - total flux cleaned = 0.000464263 Jy ! Total flux subtracted in 200 components = 0.000464263 Jy ! Clean residual min=-0.003141 max=0.003795 Jy/beam ! Clean residual mean=-0.000028 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0694407 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0694407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092041Jy sigma=0.000640 ! Fit after self-cal, rms=0.092213Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.26597e-05 Jy ! Component: 100 - total flux cleaned = -0.000103988 Jy ! Component: 150 - total flux cleaned = -0.000104922 Jy ! Component: 200 - total flux cleaned = -0.000113112 Jy ! Total flux subtracted in 200 components = -0.000113112 Jy ! Clean residual min=-0.003045 max=0.003621 Jy/beam ! Clean residual mean=-0.000030 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.0693276 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0693276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092210Jy sigma=0.000640 ! Fit after self-cal, rms=0.092211Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092211Jy sigma=0.000640 ! Fit after self-cal, rms=0.093998Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.9 mas, bmaj=11.18 mas, bpa=-17.37 degrees ! Estimated noise=698.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557309 Jy ! Component: 100 - total flux cleaned = 0.000657386 Jy ! Component: 150 - total flux cleaned = 0.000662979 Jy ! Component: 200 - total flux cleaned = 0.000667907 Jy ! Total flux subtracted in 200 components = 0.000667907 Jy ! Clean residual min=-0.004402 max=0.004744 Jy/beam ! Clean residual mean=-0.000048 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.0699955 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 50 components and 0.0699955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093999Jy sigma=0.000640 ! Fit after self-cal, rms=0.094078Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59216e-05 Jy ! Component: 100 - total flux cleaned = 7.52031e-05 Jy ! Component: 150 - total flux cleaned = 7.47501e-05 Jy ! Component: 200 - total flux cleaned = 7.44379e-05 Jy ! Total flux subtracted in 200 components = 7.44379e-05 Jy ! Clean residual min=-0.004420 max=0.004667 Jy/beam ! Clean residual mean=-0.000048 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.0700699 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.0700699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094080Jy sigma=0.000640 ! Fit after self-cal, rms=0.094085Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.27 mas, bmaj=5.339 mas, bpa=-29.26 degrees ! Estimated noise=591.587 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.27 x 5.339 at -29.26 degrees (North through East) ! Clean map min=-0.0029602 max=0.056622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=3.818 mas, bpa=-21.64 degrees ! Estimated noise=1095.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429743 Jy ! Component: 100 - total flux cleaned = 0.0536954 Jy ! Component: 150 - total flux cleaned = 0.059003 Jy ! Component: 200 - total flux cleaned = 0.06242 Jy ! Total flux subtracted in 200 components = 0.06242 Jy ! Clean residual min=-0.003251 max=0.003741 Jy/beam ! Clean residual mean=-0.000017 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.06242 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.06242 Jy ! Inverting map and beam ! Estimated beam: bmin=4.27 mas, bmaj=5.339 mas, bpa=-29.26 degrees ! Estimated noise=591.587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380863 Jy ! Component: 100 - total flux cleaned = 0.00564351 Jy ! Component: 150 - total flux cleaned = 0.00654387 Jy ! Component: 200 - total flux cleaned = 0.00693609 Jy ! Total flux subtracted in 200 components = 0.00693609 Jy ! Clean residual min=-0.003143 max=0.003524 Jy/beam ! Clean residual mean=-0.000031 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.0693561 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0693561 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.9 mas, bmaj=11.18 mas, bpa=-17.37 degrees ! Estimated noise=698.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446415 Jy ! Component: 100 - total flux cleaned = 0.00046305 Jy ! Component: 150 - total flux cleaned = 0.000478731 Jy ! Component: 200 - total flux cleaned = 0.000493426 Jy ! Total flux subtracted in 200 components = 0.000493426 Jy ! Clean residual min=-0.004437 max=0.004636 Jy/beam ! Clean residual mean=-0.000050 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.0698495 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.38312e-05 Jy ! Component: 100 - total flux cleaned = 3.27934e-05 Jy ! Component: 150 - total flux cleaned = 4.49338e-05 Jy ! Component: 200 - total flux cleaned = 5.63361e-05 Jy ! Total flux subtracted in 200 components = 5.63361e-05 Jy ! Clean residual min=-0.004428 max=0.004642 Jy/beam ! Clean residual mean=-0.000050 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.0699059 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.0699059 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.27 mas, bmaj=5.339 mas, bpa=-29.26 degrees ! Estimated noise=591.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256642 Jy ! Component: 100 - total flux cleaned = -0.00024751 Jy ! Component: 150 - total flux cleaned = -0.00023026 Jy ! Component: 200 - total flux cleaned = -0.000214069 Jy ! Total flux subtracted in 200 components = -0.000214069 Jy ! Clean residual min=-0.003095 max=0.003544 Jy/beam ! Clean residual mean=-0.000029 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0696918 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.0696918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094065Jy sigma=0.000640 ! Fit after self-cal, rms=0.094046Jy sigma=0.000640 wmodel J0230+8141_S_2017_10_09_pus_map.mod ! Writing 32 model components to file: J0230+8141_S_2017_10_09_pus_map.mod wobs J0230+8141_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0230+8141_S_2017_10_09_pus_uvs.fits wwins J0230+8141_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0230+8141_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153205 Jy ! Component: 100 - total flux cleaned = 0.0023148 Jy ! Component: 150 - total flux cleaned = 0.00287541 Jy ! Component: 200 - total flux cleaned = 0.00339867 Jy ! Component: 250 - total flux cleaned = 0.00393558 Jy ! Component: 300 - total flux cleaned = 0.00444106 Jy ! Component: 350 - total flux cleaned = 0.00487728 Jy ! Component: 400 - total flux cleaned = 0.00536558 Jy ! Component: 450 - total flux cleaned = 0.00565038 Jy ! Component: 500 - total flux cleaned = 0.00585543 Jy ! Component: 550 - total flux cleaned = 0.00601886 Jy ! Component: 600 - total flux cleaned = 0.0061448 Jy ! Component: 650 - total flux cleaned = 0.00611368 Jy ! Component: 700 - total flux cleaned = 0.0061727 Jy ! Component: 750 - total flux cleaned = 0.00620101 Jy ! Component: 800 - total flux cleaned = 0.00625717 Jy ! Component: 850 - total flux cleaned = 0.00628407 Jy ! Component: 900 - total flux cleaned = 0.00625816 Jy ! Component: 950 - total flux cleaned = 0.00628445 Jy ! Component: 1000 - total flux cleaned = 0.0062596 Jy ! Component: 1050 - total flux cleaned = 0.00628394 Jy ! Component: 1100 - total flux cleaned = 0.00640301 Jy ! Component: 1150 - total flux cleaned = 0.00647285 Jy ! Component: 1200 - total flux cleaned = 0.0065186 Jy ! Component: 1250 - total flux cleaned = 0.00654103 Jy ! Component: 1300 - total flux cleaned = 0.00649727 Jy ! Component: 1350 - total flux cleaned = 0.00645445 Jy ! Component: 1400 - total flux cleaned = 0.00649659 Jy ! Component: 1450 - total flux cleaned = 0.00643445 Jy ! Component: 1500 - total flux cleaned = 0.00633359 Jy ! Component: 1550 - total flux cleaned = 0.00631442 Jy ! Component: 1600 - total flux cleaned = 0.00633426 Jy ! Component: 1650 - total flux cleaned = 0.00629574 Jy ! Component: 1700 - total flux cleaned = 0.00629553 Jy ! Component: 1750 - total flux cleaned = 0.00625867 Jy ! Component: 1800 - total flux cleaned = 0.00633188 Jy ! Component: 1850 - total flux cleaned = 0.00633225 Jy ! Component: 1900 - total flux cleaned = 0.00626151 Jy ! Component: 1950 - total flux cleaned = 0.00626168 Jy ! Component: 2000 - total flux cleaned = 0.00626168 Jy ! Component: 2050 - total flux cleaned = 0.00621111 Jy ! Component: 2100 - total flux cleaned = 0.00621118 Jy ! Component: 2150 - total flux cleaned = 0.00621095 Jy ! Component: 2200 - total flux cleaned = 0.00612966 Jy ! Component: 2250 - total flux cleaned = 0.006178 Jy ! Component: 2300 - total flux cleaned = 0.00608256 Jy ! Component: 2350 - total flux cleaned = 0.00608246 Jy ! Component: 2400 - total flux cleaned = 0.00605126 Jy ! Component: 2450 - total flux cleaned = 0.00594352 Jy ! Component: 2500 - total flux cleaned = 0.00594369 Jy ! Component: 2550 - total flux cleaned = 0.00588355 Jy ! Component: 2600 - total flux cleaned = 0.00586875 Jy ! Component: 2650 - total flux cleaned = 0.00580965 Jy ! Component: 2700 - total flux cleaned = 0.00579485 Jy ! Component: 2750 - total flux cleaned = 0.00572245 Jy ! Component: 2800 - total flux cleaned = 0.0056366 Jy ! Component: 2850 - total flux cleaned = 0.00565066 Jy ! Component: 2900 - total flux cleaned = 0.00558058 Jy ! Component: 2950 - total flux cleaned = 0.00552502 Jy ! Component: 3000 - total flux cleaned = 0.00546995 Jy ! Component: 3050 - total flux cleaned = 0.0054019 Jy ! Component: 3100 - total flux cleaned = 0.00532078 Jy ! Component: 3150 - total flux cleaned = 0.00524056 Jy ! Component: 3200 - total flux cleaned = 0.00517436 Jy ! Component: 3250 - total flux cleaned = 0.00518725 Jy ! Component: 3300 - total flux cleaned = 0.00508288 Jy ! Component: 3350 - total flux cleaned = 0.00500539 Jy ! Component: 3400 - total flux cleaned = 0.00492833 Jy ! Component: 3450 - total flux cleaned = 0.00485213 Jy ! Component: 3500 - total flux cleaned = 0.00473861 Jy ! Component: 3550 - total flux cleaned = 0.00471357 Jy ! Component: 3600 - total flux cleaned = 0.00461409 Jy ! Component: 3650 - total flux cleaned = 0.00456475 Jy ! Component: 3700 - total flux cleaned = 0.00451568 Jy ! Component: 3750 - total flux cleaned = 0.00440627 Jy ! Component: 3800 - total flux cleaned = 0.00438217 Jy ! Component: 3850 - total flux cleaned = 0.00434614 Jy ! Component: 3900 - total flux cleaned = 0.00433413 Jy ! Component: 3950 - total flux cleaned = 0.0042867 Jy ! Component: 4000 - total flux cleaned = 0.00423964 Jy ! Component: 4050 - total flux cleaned = 0.00418123 Jy ! Total flux subtracted in 4096 components = 0.00416962 Jy ! Clean residual min=-0.000608 max=0.000579 Jy/beam ! Clean residual mean=-0.000010 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0738614 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 362 components and 0.0738615 Jy ![Exited script file: muppet] wmap "J0230+8141_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.27 x 5.339 at -29.26 degrees (North through East) ! Clean map min=-0.0014412 max=0.056985 Jy/beam ! Writing clean map to FITS file: J0230+8141_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0569846 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205481 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08177 1.08177 2.16354 4.32709 8.65418 17.3084 34.6167 69.2334 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.27 x 5.339 at -29.26 degrees (North through East) ! Clean map min=-0.0014412 max=0.056985 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0230+8141_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:47 2019