! Started logfile: J0230+8141_S_2017_09_26_pus_uvs.log on Sat May 11 12:53:51 2019 obs J0230+8141_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0230+8141_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.881236 visibilities/baseline/integration-bin. ! Found source: J0230+8141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 37308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0230+8141_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 276 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1263 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977534Jy sigma=0.008350 ! Fit after self-cal, rms=0.949427Jy sigma=0.008128 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=9.325 mas, bpa=-4.635 degrees ! Estimated noise=884.331 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386279 Jy ! Component: 100 - total flux cleaned = 0.048717 Jy ! Total flux subtracted in 100 components = 0.048717 Jy ! Clean residual min=-0.003228 max=0.004263 Jy/beam ! Clean residual mean=0.000021 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.048717 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.048717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080929Jy sigma=0.000659 ! Fit after self-cal, rms=0.080463Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=10.68 mas, bpa=-6.237 degrees ! Estimated noise=493.638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798762 Jy ! Component: 100 - total flux cleaned = 0.012419 Jy ! Component: 150 - total flux cleaned = 0.015257 Jy ! Component: 200 - total flux cleaned = 0.0171313 Jy ! Total flux subtracted in 200 components = 0.0171313 Jy ! Clean residual min=-0.003627 max=0.003934 Jy/beam ! Clean residual mean=0.000009 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.0658483 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 73 components and 0.0658483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079668Jy sigma=0.000648 ! Fit after self-cal, rms=0.079593Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.13 HN 1.07 KP 1.11 ! LA 0.81 MK 1.08 NL 0.96 OV 1.10 ! PT 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.13 HN 1.12 KP 1.02 ! LA 0.82 MK 1.03 NL 1.10 OV 1.17 ! PT 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.16 HN 1.05 KP 1.00 ! LA 0.85 MK 1.13 NL 1.03 OV 1.07 ! PT 0.86 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 1.00 KP 1.00* ! LA 0.83 MK 0.93 NL 1.00* OV 1.05 ! PT 0.84 ! ! ! Fit before self-cal, rms=0.079593Jy sigma=0.000647 ! Fit after self-cal, rms=0.082120Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=10.76 mas, bpa=-6.112 degrees ! Estimated noise=492.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432667 Jy ! Component: 100 - total flux cleaned = 0.00058067 Jy ! Component: 150 - total flux cleaned = 0.000650795 Jy ! Component: 200 - total flux cleaned = 0.000686309 Jy ! Total flux subtracted in 200 components = 0.000686309 Jy ! Clean residual min=-0.002706 max=0.004493 Jy/beam ! Clean residual mean=0.000021 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.0665346 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.0665346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082116Jy sigma=0.000643 ! Fit after self-cal, rms=0.082434Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082434Jy sigma=0.000642 ! Fit after self-cal, rms=0.082972Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=10.7 mas, bpa=-5.353 degrees ! Estimated noise=494.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190874 Jy ! Component: 100 - total flux cleaned = 0.000282326 Jy ! Component: 150 - total flux cleaned = 0.000315919 Jy ! Component: 200 - total flux cleaned = 0.000324868 Jy ! Total flux subtracted in 200 components = 0.000324868 Jy ! Clean residual min=-0.002282 max=0.003768 Jy/beam ! Clean residual mean=0.000006 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.0668594 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.0668594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082967Jy sigma=0.000641 ! Fit after self-cal, rms=0.083105Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.68609e-05 Jy ! Component: 100 - total flux cleaned = -4.93787e-05 Jy ! Component: 150 - total flux cleaned = -4.9301e-05 Jy ! Component: 200 - total flux cleaned = -4.34885e-05 Jy ! Total flux subtracted in 200 components = -4.34885e-05 Jy ! Clean residual min=-0.002363 max=0.003670 Jy/beam ! Clean residual mean=0.000007 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.0668159 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 0.066816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083104Jy sigma=0.000640 ! Fit after self-cal, rms=0.083103Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083103Jy sigma=0.000640 ! Fit after self-cal, rms=0.083679Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=10.68 mas, bpa=-5.05 degrees ! Estimated noise=495.724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180475 Jy ! Component: 100 - total flux cleaned = 0.000227117 Jy ! Component: 150 - total flux cleaned = 0.000250244 Jy ! Component: 200 - total flux cleaned = 0.000256871 Jy ! Total flux subtracted in 200 components = 0.000256871 Jy ! Clean residual min=-0.002289 max=0.003652 Jy/beam ! Clean residual mean=0.000003 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0670728 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.0670728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083673Jy sigma=0.000640 ! Fit after self-cal, rms=0.083714Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.45618e-05 Jy ! Component: 100 - total flux cleaned = -7.08696e-05 Jy ! Component: 150 - total flux cleaned = -6.50994e-05 Jy ! Component: 200 - total flux cleaned = -5.9961e-05 Jy ! Total flux subtracted in 200 components = -5.9961e-05 Jy ! Clean residual min=-0.002311 max=0.003647 Jy/beam ! Clean residual mean=0.000004 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0670129 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 110 components and 0.0670129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083712Jy sigma=0.000640 ! Fit after self-cal, rms=0.083713Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083713Jy sigma=0.000640 ! Fit after self-cal, rms=0.084048Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.666 mas, bmaj=14.61 mas, bpa=-13.11 degrees ! Estimated noise=590.955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193297 Jy ! Component: 100 - total flux cleaned = 0.000207195 Jy ! Component: 150 - total flux cleaned = 0.00022002 Jy ! Component: 200 - total flux cleaned = 0.000200692 Jy ! Total flux subtracted in 200 components = 0.000200692 Jy ! Clean residual min=-0.003497 max=0.005424 Jy/beam ! Clean residual mean=0.000003 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.0672136 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 111 components and 0.0672136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084041Jy sigma=0.000640 ! Fit after self-cal, rms=0.084048Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.9276e-05 Jy ! Component: 100 - total flux cleaned = -4.01264e-05 Jy ! Component: 150 - total flux cleaned = -3.91397e-05 Jy ! Component: 200 - total flux cleaned = -4.54965e-05 Jy ! Total flux subtracted in 200 components = -4.54965e-05 Jy ! Clean residual min=-0.003489 max=0.005434 Jy/beam ! Clean residual mean=0.000003 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.0671681 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 113 components and 0.0671681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084047Jy sigma=0.000640 ! Fit after self-cal, rms=0.084045Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=10.67 mas, bpa=-4.797 degrees ! Estimated noise=496.914 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 10.67 at -4.797 degrees (North through East) ! Clean map min=-0.0022518 max=0.052799 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.529 mas, bmaj=9.273 mas, bpa=-3.033 degrees ! Estimated noise=891.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381766 Jy ! Component: 100 - total flux cleaned = 0.0496981 Jy ! Component: 150 - total flux cleaned = 0.0553792 Jy ! Component: 200 - total flux cleaned = 0.0591088 Jy ! Total flux subtracted in 200 components = 0.0591088 Jy ! Clean residual min=-0.002714 max=0.003407 Jy/beam ! Clean residual mean=0.000014 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0591088 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0591088 Jy ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=10.67 mas, bpa=-4.797 degrees ! Estimated noise=496.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364609 Jy ! Component: 100 - total flux cleaned = 0.0056358 Jy ! Component: 150 - total flux cleaned = 0.00676363 Jy ! Component: 200 - total flux cleaned = 0.00741063 Jy ! Total flux subtracted in 200 components = 0.00741063 Jy ! Clean residual min=-0.002383 max=0.003684 Jy/beam ! Clean residual mean=0.000003 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.0665195 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.0665195 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.666 mas, bmaj=14.61 mas, bpa=-13.11 degrees ! Estimated noise=590.955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407498 Jy ! Component: 100 - total flux cleaned = 0.000433824 Jy ! Component: 150 - total flux cleaned = 0.000455783 Jy ! Component: 200 - total flux cleaned = 0.000473798 Jy ! Total flux subtracted in 200 components = 0.000473798 Jy ! Clean residual min=-0.003502 max=0.005428 Jy/beam ! Clean residual mean=0.000003 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.0669933 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.29174e-07 Jy ! Component: 100 - total flux cleaned = -5.94811e-06 Jy ! Component: 150 - total flux cleaned = -6.21006e-06 Jy ! Component: 200 - total flux cleaned = -6.15985e-06 Jy ! Total flux subtracted in 200 components = -6.15985e-06 Jy ! Clean residual min=-0.003502 max=0.005423 Jy/beam ! Clean residual mean=0.000003 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.0669871 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.0669871 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=10.67 mas, bpa=-4.797 degrees ! Estimated noise=496.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.90731e-05 Jy ! Component: 100 - total flux cleaned = -5.25492e-05 Jy ! Component: 150 - total flux cleaned = -5.12653e-05 Jy ! Component: 200 - total flux cleaned = -7.13851e-05 Jy ! Total flux subtracted in 200 components = -7.13851e-05 Jy ! Clean residual min=-0.002367 max=0.003658 Jy/beam ! Clean residual mean=0.000003 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.0669157 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.0669157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084046Jy sigma=0.000640 ! Fit after self-cal, rms=0.084047Jy sigma=0.000640 wmodel J0230+8141_S_2017_09_26_pus_map.mod ! Writing 66 model components to file: J0230+8141_S_2017_09_26_pus_map.mod wobs J0230+8141_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0230+8141_S_2017_09_26_pus_uvs.fits wwins J0230+8141_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0230+8141_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164487 Jy ! Component: 100 - total flux cleaned = 0.00301337 Jy ! Component: 150 - total flux cleaned = 0.00395577 Jy ! Component: 200 - total flux cleaned = 0.00454115 Jy ! Component: 250 - total flux cleaned = 0.00500252 Jy ! Component: 300 - total flux cleaned = 0.00532781 Jy ! Component: 350 - total flux cleaned = 0.00556536 Jy ! Component: 400 - total flux cleaned = 0.00566106 Jy ! Component: 450 - total flux cleaned = 0.00563237 Jy ! Component: 500 - total flux cleaned = 0.00571929 Jy ! Component: 550 - total flux cleaned = 0.00569144 Jy ! Component: 600 - total flux cleaned = 0.0056389 Jy ! Component: 650 - total flux cleaned = 0.00566578 Jy ! Component: 700 - total flux cleaned = 0.00569016 Jy ! Component: 750 - total flux cleaned = 0.00559468 Jy ! Component: 800 - total flux cleaned = 0.005549 Jy ! Component: 850 - total flux cleaned = 0.00548227 Jy ! Component: 900 - total flux cleaned = 0.005417 Jy ! Component: 950 - total flux cleaned = 0.00533224 Jy ! Component: 1000 - total flux cleaned = 0.00527077 Jy ! Component: 1050 - total flux cleaned = 0.00527034 Jy ! Component: 1100 - total flux cleaned = 0.00517254 Jy ! Component: 1150 - total flux cleaned = 0.00513431 Jy ! Component: 1200 - total flux cleaned = 0.00500405 Jy ! Component: 1250 - total flux cleaned = 0.00493139 Jy ! Component: 1300 - total flux cleaned = 0.00486031 Jy ! Component: 1350 - total flux cleaned = 0.00477385 Jy ! Component: 1400 - total flux cleaned = 0.00479128 Jy ! Component: 1450 - total flux cleaned = 0.00477471 Jy ! Component: 1500 - total flux cleaned = 0.0047421 Jy ! Component: 1550 - total flux cleaned = 0.0046468 Jy ! Component: 1600 - total flux cleaned = 0.00467828 Jy ! Component: 1650 - total flux cleaned = 0.00466321 Jy ! Component: 1700 - total flux cleaned = 0.00466325 Jy ! Component: 1750 - total flux cleaned = 0.00466322 Jy ! Component: 1800 - total flux cleaned = 0.00470625 Jy ! Component: 1850 - total flux cleaned = 0.00470589 Jy ! Component: 1900 - total flux cleaned = 0.00469171 Jy ! Component: 1950 - total flux cleaned = 0.00470534 Jy ! Component: 2000 - total flux cleaned = 0.00471898 Jy ! Component: 2050 - total flux cleaned = 0.00478546 Jy ! Component: 2100 - total flux cleaned = 0.00485093 Jy ! Component: 2150 - total flux cleaned = 0.00490253 Jy ! Component: 2200 - total flux cleaned = 0.00492755 Jy ! Component: 2250 - total flux cleaned = 0.00497784 Jy ! Component: 2300 - total flux cleaned = 0.00502726 Jy ! Component: 2350 - total flux cleaned = 0.00506378 Jy ! Component: 2400 - total flux cleaned = 0.00508779 Jy ! Component: 2450 - total flux cleaned = 0.00512349 Jy ! Component: 2500 - total flux cleaned = 0.00515869 Jy ! Component: 2550 - total flux cleaned = 0.00521673 Jy ! Component: 2600 - total flux cleaned = 0.0052738 Jy ! Component: 2650 - total flux cleaned = 0.00533009 Jy ! Component: 2700 - total flux cleaned = 0.00535244 Jy ! Component: 2750 - total flux cleaned = 0.00537461 Jy ! Component: 2800 - total flux cleaned = 0.00542925 Jy ! Component: 2850 - total flux cleaned = 0.00546165 Jy ! Component: 2900 - total flux cleaned = 0.00551498 Jy ! Component: 2950 - total flux cleaned = 0.0055045 Jy ! Component: 3000 - total flux cleaned = 0.00554633 Jy ! Component: 3050 - total flux cleaned = 0.00554633 Jy ! Component: 3100 - total flux cleaned = 0.00557714 Jy ! Component: 3150 - total flux cleaned = 0.0055873 Jy ! Component: 3200 - total flux cleaned = 0.00560759 Jy ! Component: 3250 - total flux cleaned = 0.00562754 Jy ! Component: 3300 - total flux cleaned = 0.00560802 Jy ! Component: 3350 - total flux cleaned = 0.00563727 Jy ! Component: 3400 - total flux cleaned = 0.00563733 Jy ! Component: 3450 - total flux cleaned = 0.00564695 Jy ! Component: 3500 - total flux cleaned = 0.00569456 Jy ! Component: 3550 - total flux cleaned = 0.00568509 Jy ! Component: 3600 - total flux cleaned = 0.00569445 Jy ! Component: 3650 - total flux cleaned = 0.00571291 Jy ! Component: 3700 - total flux cleaned = 0.00573127 Jy ! Component: 3750 - total flux cleaned = 0.00577671 Jy ! Component: 3800 - total flux cleaned = 0.00579471 Jy ! Component: 3850 - total flux cleaned = 0.00580364 Jy ! Component: 3900 - total flux cleaned = 0.00583914 Jy ! Component: 3950 - total flux cleaned = 0.00585688 Jy ! Component: 4000 - total flux cleaned = 0.00588325 Jy ! Component: 4050 - total flux cleaned = 0.00591806 Jy ! Total flux subtracted in 4096 components = 0.0059267 Jy ! Clean residual min=-0.000517 max=0.000472 Jy/beam ! Clean residual mean=0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0728424 Jy keep ! Adding 350 model components to the UV plane model. ! The established model now contains 416 components and 0.0728424 Jy ![Exited script file: muppet] wmap "J0230+8141_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 10.67 at -4.797 degrees (North through East) ! Clean map min=-0.0014176 max=0.05273 Jy/beam ! Writing clean map to FITS file: J0230+8141_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0527304 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157442 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.895737 0.895737 1.79147 3.58295 7.16589 14.3318 28.6636 57.3272 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 10.67 at -4.797 degrees (North through East) ! Clean map min=-0.0014176 max=0.05273 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0230+8141_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:53:56 2019