! Started logfile: J0228-3719_S_2017_05_27_pus_uvs.log on Fri May 3 10:55:26 2019 obs J0228-3719_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0228-3719_S_2017_05_27_pus_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782815 visibilities/baseline/integration-bin. ! Found source: J0228-3719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 21136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0228-3719_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 793 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981203Jy sigma=0.005069 ! Fit after self-cal, rms=0.923615Jy sigma=0.004837 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=6.742 mas, bpa=-8.683 degrees ! Estimated noise=2143.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0668227 Jy ! Component: 100 - total flux cleaned = 0.0834369 Jy ! Total flux subtracted in 100 components = 0.0834369 Jy ! Clean residual min=-0.007147 max=0.009029 Jy/beam ! Clean residual mean=-0.000015 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.0834369 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0834369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154220Jy sigma=0.000648 ! Fit after self-cal, rms=0.153761Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=8.031 mas, bpa=-7.776 degrees ! Estimated noise=1092.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088842 Jy ! Component: 100 - total flux cleaned = 0.01293 Jy ! Component: 150 - total flux cleaned = 0.0149197 Jy ! Component: 200 - total flux cleaned = 0.0159257 Jy ! Total flux subtracted in 200 components = 0.0159257 Jy ! Clean residual min=-0.003541 max=0.003245 Jy/beam ! Clean residual mean=-0.000026 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.0993626 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.0993626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153286Jy sigma=0.000644 ! Fit after self-cal, rms=0.153267Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.90 KP 0.99 ! LA 0.95 MK 1.10 NL 0.89 OV 1.05 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.06 KP 1.03 ! LA 0.98 MK 1.02 NL 1.01 OV 1.02 ! PT 1.03 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00 KP 1.00 ! LA 0.98 MK 1.03 NL 1.00 OV 0.98 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.73 KP 1.00* ! LA 0.97 MK 0.89 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.153267Jy sigma=0.000643 ! Fit after self-cal, rms=0.148505Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=8.148 mas, bpa=-8.236 degrees ! Estimated noise=1093.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.20684e-05 Jy ! Component: 100 - total flux cleaned = -7.51617e-05 Jy ! Component: 150 - total flux cleaned = -7.54854e-05 Jy ! Component: 200 - total flux cleaned = -5.15439e-05 Jy ! Total flux subtracted in 200 components = -5.15439e-05 Jy ! Clean residual min=-0.003258 max=0.002986 Jy/beam ! Clean residual mean=-0.000023 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.099311 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.099311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148494Jy sigma=0.000642 ! Fit after self-cal, rms=0.148371Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148371Jy sigma=0.000642 ! Fit after self-cal, rms=0.147464Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=8.141 mas, bpa=-8.317 degrees ! Estimated noise=1094.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51167e-06 Jy ! Component: 100 - total flux cleaned = -5.59339e-06 Jy ! Component: 150 - total flux cleaned = -5.408e-06 Jy ! Component: 200 - total flux cleaned = 1.40746e-05 Jy ! Total flux subtracted in 200 components = 1.40746e-05 Jy ! Clean residual min=-0.003165 max=0.002951 Jy/beam ! Clean residual mean=-0.000023 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0993251 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0993251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147458Jy sigma=0.000642 ! Fit after self-cal, rms=0.147445Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123501 Jy ! Component: 100 - total flux cleaned = 0.000123204 Jy ! Component: 150 - total flux cleaned = 0.000142308 Jy ! Component: 200 - total flux cleaned = 0.000142943 Jy ! Total flux subtracted in 200 components = 0.000142943 Jy ! Clean residual min=-0.003172 max=0.002971 Jy/beam ! Clean residual mean=-0.000022 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0994681 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0994681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147439Jy sigma=0.000642 ! Fit after self-cal, rms=0.147435Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147435Jy sigma=0.000642 ! Fit after self-cal, rms=0.146630Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=8.094 mas, bpa=-8.343 degrees ! Estimated noise=1090.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129334 Jy ! Component: 100 - total flux cleaned = -0.000220183 Jy ! Component: 150 - total flux cleaned = -0.000220271 Jy ! Component: 200 - total flux cleaned = -0.000205396 Jy ! Total flux subtracted in 200 components = -0.000205396 Jy ! Clean residual min=-0.003179 max=0.002881 Jy/beam ! Clean residual mean=-0.000024 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0992627 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0992627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146626Jy sigma=0.000641 ! Fit after self-cal, rms=0.146627Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.30483e-05 Jy ! Component: 100 - total flux cleaned = -6.01589e-05 Jy ! Component: 150 - total flux cleaned = -4.41475e-05 Jy ! Component: 200 - total flux cleaned = -2.89666e-05 Jy ! Total flux subtracted in 200 components = -2.89666e-05 Jy ! Clean residual min=-0.003158 max=0.002903 Jy/beam ! Clean residual mean=-0.000023 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0992337 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0992337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146624Jy sigma=0.000641 ! Fit after self-cal, rms=0.146618Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146618Jy sigma=0.000641 ! Fit after self-cal, rms=0.146283Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.082 mas, bmaj=24.77 mas, bpa=-1.879 degrees ! Estimated noise=1350.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261799 Jy ! Component: 100 - total flux cleaned = 0.000260146 Jy ! Component: 150 - total flux cleaned = 0.000259484 Jy ! Component: 200 - total flux cleaned = 0.000258457 Jy ! Total flux subtracted in 200 components = 0.000258457 Jy ! Clean residual min=-0.002954 max=0.002778 Jy/beam ! Clean residual mean=-0.000049 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.0994922 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.0994921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146286Jy sigma=0.000641 ! Fit after self-cal, rms=0.146289Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17094e-05 Jy ! Component: 100 - total flux cleaned = 4.18592e-05 Jy ! Component: 150 - total flux cleaned = 4.20657e-05 Jy ! Component: 200 - total flux cleaned = 4.15381e-05 Jy ! Total flux subtracted in 200 components = 4.15381e-05 Jy ! Clean residual min=-0.002963 max=0.002773 Jy/beam ! Clean residual mean=-0.000049 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.0995337 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.0995337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146291Jy sigma=0.000641 ! Fit after self-cal, rms=0.146289Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.081 mas, bpa=-8.362 degrees ! Estimated noise=1087.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 8.081 at -8.362 degrees (North through East) ! Clean map min=-0.0029435 max=0.084949 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=6.769 mas, bpa=-9.445 degrees ! Estimated noise=2126.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665267 Jy ! Component: 100 - total flux cleaned = 0.0843471 Jy ! Component: 150 - total flux cleaned = 0.0918927 Jy ! Component: 200 - total flux cleaned = 0.0962194 Jy ! Total flux subtracted in 200 components = 0.0962194 Jy ! Clean residual min=-0.006199 max=0.005527 Jy/beam ! Clean residual mean=-0.000009 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.0962193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0962193 Jy ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.081 mas, bpa=-8.362 degrees ! Estimated noise=1087.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240186 Jy ! Component: 100 - total flux cleaned = 0.00284766 Jy ! Component: 150 - total flux cleaned = 0.00291818 Jy ! Component: 200 - total flux cleaned = 0.00297486 Jy ! Total flux subtracted in 200 components = 0.00297486 Jy ! Clean residual min=-0.003295 max=0.002949 Jy/beam ! Clean residual mean=-0.000023 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0991942 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.0991942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.082 mas, bmaj=24.77 mas, bpa=-1.879 degrees ! Estimated noise=1350.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000477527 Jy ! Component: 100 - total flux cleaned = 0.000477528 Jy ! Component: 150 - total flux cleaned = 0.000476667 Jy ! Component: 200 - total flux cleaned = 0.00046309 Jy ! Total flux subtracted in 200 components = 0.00046309 Jy ! Clean residual min=-0.002948 max=0.002706 Jy/beam ! Clean residual mean=-0.000048 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.0996573 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.30977e-07 Jy ! Component: 100 - total flux cleaned = -1.26021e-05 Jy ! Component: 150 - total flux cleaned = -1.32244e-05 Jy ! Component: 200 - total flux cleaned = -2.36876e-05 Jy ! Total flux subtracted in 200 components = -2.36876e-05 Jy ! Clean residual min=-0.002944 max=0.002689 Jy/beam ! Clean residual mean=-0.000048 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.0996336 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.0996336 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.081 mas, bpa=-8.362 degrees ! Estimated noise=1087.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323382 Jy ! Component: 100 - total flux cleaned = -0.000270097 Jy ! Component: 150 - total flux cleaned = -0.000270139 Jy ! Component: 200 - total flux cleaned = -0.000292758 Jy ! Total flux subtracted in 200 components = -0.000292758 Jy ! Clean residual min=-0.003261 max=0.002918 Jy/beam ! Clean residual mean=-0.000023 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0993408 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0993408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146306Jy sigma=0.000641 ! Fit after self-cal, rms=0.146323Jy sigma=0.000641 wmodel J0228-3719_S_2017_05_27_pus_map.mod ! Writing 44 model components to file: J0228-3719_S_2017_05_27_pus_map.mod wobs J0228-3719_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0228-3719_S_2017_05_27_pus_uvs.fits wwins J0228-3719_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0228-3719_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523397 Jy ! Component: 100 - total flux cleaned = -0.000829449 Jy ! Component: 150 - total flux cleaned = -0.000925259 Jy ! Component: 200 - total flux cleaned = -0.00105805 Jy ! Component: 250 - total flux cleaned = -0.00127126 Jy ! Component: 300 - total flux cleaned = -0.00131197 Jy ! Component: 350 - total flux cleaned = -0.00131169 Jy ! Component: 400 - total flux cleaned = -0.00123375 Jy ! Component: 450 - total flux cleaned = -0.00108441 Jy ! Component: 500 - total flux cleaned = -0.00104851 Jy ! Component: 550 - total flux cleaned = -0.000977144 Jy ! Component: 600 - total flux cleaned = -0.000872517 Jy ! Component: 650 - total flux cleaned = -0.000838779 Jy ! Component: 700 - total flux cleaned = -0.000738629 Jy ! Component: 750 - total flux cleaned = -0.000673435 Jy ! Component: 800 - total flux cleaned = -0.000481376 Jy ! Component: 850 - total flux cleaned = -0.000356868 Jy ! Component: 900 - total flux cleaned = -0.000265493 Jy ! Component: 950 - total flux cleaned = -0.000205294 Jy ! Component: 1000 - total flux cleaned = -2.71895e-05 Jy ! Component: 1050 - total flux cleaned = 3.08869e-05 Jy ! Component: 1100 - total flux cleaned = 0.000145721 Jy ! Component: 1150 - total flux cleaned = 0.000231003 Jy ! Component: 1200 - total flux cleaned = 0.000369394 Jy ! Component: 1250 - total flux cleaned = 0.000369587 Jy ! Component: 1300 - total flux cleaned = 0.000531597 Jy ! Component: 1350 - total flux cleaned = 0.000584526 Jy ! Component: 1400 - total flux cleaned = 0.000636744 Jy ! Component: 1450 - total flux cleaned = 0.000792014 Jy ! Component: 1500 - total flux cleaned = 0.000868437 Jy ! Component: 1550 - total flux cleaned = 0.000843533 Jy ! Component: 1600 - total flux cleaned = 0.000893603 Jy ! Component: 1650 - total flux cleaned = 0.000893956 Jy ! Component: 1700 - total flux cleaned = 0.000918237 Jy ! Component: 1750 - total flux cleaned = 0.0010378 Jy ! Component: 1800 - total flux cleaned = 0.00106098 Jy ! Component: 1850 - total flux cleaned = 0.0010609 Jy ! Component: 1900 - total flux cleaned = 0.00113035 Jy ! Component: 1950 - total flux cleaned = 0.00117602 Jy ! Component: 2000 - total flux cleaned = 0.00124357 Jy ! Component: 2050 - total flux cleaned = 0.00122113 Jy ! Component: 2100 - total flux cleaned = 0.00128761 Jy ! Component: 2150 - total flux cleaned = 0.00139729 Jy ! Component: 2200 - total flux cleaned = 0.00141891 Jy ! Component: 2250 - total flux cleaned = 0.00152713 Jy ! Component: 2300 - total flux cleaned = 0.00169888 Jy ! Component: 2350 - total flux cleaned = 0.00174133 Jy ! Component: 2400 - total flux cleaned = 0.00180432 Jy ! Component: 2450 - total flux cleaned = 0.00190894 Jy ! Component: 2500 - total flux cleaned = 0.00201245 Jy ! Component: 2550 - total flux cleaned = 0.00207368 Jy ! Component: 2600 - total flux cleaned = 0.0021142 Jy ! Component: 2650 - total flux cleaned = 0.00215479 Jy ! Component: 2700 - total flux cleaned = 0.00229548 Jy ! Component: 2750 - total flux cleaned = 0.00249464 Jy ! Component: 2800 - total flux cleaned = 0.00241547 Jy ! Component: 2850 - total flux cleaned = 0.0026315 Jy ! Component: 2900 - total flux cleaned = 0.00270947 Jy ! Component: 2950 - total flux cleaned = 0.00284513 Jy ! Component: 3000 - total flux cleaned = 0.00296048 Jy ! Component: 3050 - total flux cleaned = 0.00307488 Jy ! Component: 3100 - total flux cleaned = 0.0032268 Jy ! Component: 3150 - total flux cleaned = 0.00333989 Jy ! Component: 3200 - total flux cleaned = 0.00348943 Jy ! Component: 3250 - total flux cleaned = 0.00358228 Jy ! Component: 3300 - total flux cleaned = 0.0037485 Jy ! Component: 3350 - total flux cleaned = 0.00393196 Jy ! Component: 3400 - total flux cleaned = 0.00404134 Jy ! Component: 3450 - total flux cleaned = 0.00416833 Jy ! Component: 3500 - total flux cleaned = 0.00424055 Jy ! Component: 3550 - total flux cleaned = 0.00431235 Jy ! Component: 3600 - total flux cleaned = 0.00438356 Jy ! Component: 3650 - total flux cleaned = 0.00452538 Jy ! Component: 3700 - total flux cleaned = 0.00463102 Jy ! Component: 3750 - total flux cleaned = 0.00475372 Jy ! Component: 3800 - total flux cleaned = 0.00489302 Jy ! Component: 3850 - total flux cleaned = 0.00496225 Jy ! Component: 3900 - total flux cleaned = 0.00506566 Jy ! Component: 3950 - total flux cleaned = 0.00513417 Jy ! Component: 4000 - total flux cleaned = 0.0051684 Jy ! Component: 4050 - total flux cleaned = 0.00530393 Jy ! Total flux subtracted in 4096 components = 0.00537131 Jy ! Clean residual min=-0.001077 max=0.001080 Jy/beam ! Clean residual mean=0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.104712 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 292 components and 0.104712 Jy ![Exited script file: muppet] wmap "J0228-3719_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 8.081 at -8.362 degrees (North through East) ! Clean map min=-0.0025582 max=0.084042 Jy/beam ! Writing clean map to FITS file: J0228-3719_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0840424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000291023 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03884 1.03884 2.07769 4.15537 8.31074 16.6215 33.243 66.4859 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 8.081 at -8.362 degrees (North through East) ! Clean map min=-0.0025582 max=0.084042 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0228-3719_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:55:31 2019