! Started logfile: J0225-2312_S_2017_10_09_pus_uvs.log on Sun May 12 13:02:36 2019 obs J0225-2312_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0225-2312_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.764559 visibilities/baseline/integration-bin. ! Found source: J0225-2312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0225-2312_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 781 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920179Jy sigma=0.006880 ! Fit after self-cal, rms=0.902964Jy sigma=0.006756 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=12.5 mas, bpa=-21.19 degrees ! Estimated noise=1514.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716359 Jy ! Component: 100 - total flux cleaned = 0.0934802 Jy ! Total flux subtracted in 100 components = 0.0934802 Jy ! Clean residual min=-0.008143 max=0.013478 Jy/beam ! Clean residual mean=-0.000036 rms=0.002647 Jy/beam ! Combined flux in latest and established models = 0.0934802 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0934802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103810Jy sigma=0.000723 ! Fit after self-cal, rms=0.103728Jy sigma=0.000723 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=14.34 mas, bpa=-20.98 degrees ! Estimated noise=889.716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022102 Jy ! Component: 100 - total flux cleaned = 0.0355035 Jy ! Component: 150 - total flux cleaned = 0.0445302 Jy ! Component: 200 - total flux cleaned = 0.050866 Jy ! Total flux subtracted in 200 components = 0.050866 Jy ! Clean residual min=-0.006805 max=0.008751 Jy/beam ! Clean residual mean=-0.000009 rms=0.001976 Jy/beam ! Combined flux in latest and established models = 0.144346 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 116 components and 0.144346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098293Jy sigma=0.000682 ! Fit after self-cal, rms=0.098088Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.84 HN 1.02 KP 1.13 ! LA 0.98 MK 1.07 NL 1.02 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 1.09 KP 1.08 ! LA 0.89 MK 1.02 NL 1.11 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.92 HN 1.03 KP 0.94 ! LA 0.72 MK 1.06 NL 1.24 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.81 KP 1.00* ! LA 1.15 MK 1.04 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.098088Jy sigma=0.000681 ! Fit after self-cal, rms=0.099647Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=14.85 mas, bpa=-20.99 degrees ! Estimated noise=905.719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543705 Jy ! Component: 100 - total flux cleaned = 0.000610871 Jy ! Component: 150 - total flux cleaned = 0.000666527 Jy ! Component: 200 - total flux cleaned = 0.000715313 Jy ! Total flux subtracted in 200 components = 0.000715313 Jy ! Clean residual min=-0.005097 max=0.007275 Jy/beam ! Clean residual mean=0.000016 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.145061 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 128 components and 0.145061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099536Jy sigma=0.000668 ! Fit after self-cal, rms=0.099706Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099706Jy sigma=0.000667 ! Fit after self-cal, rms=0.101907Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=15.07 mas, bpa=-21.06 degrees ! Estimated noise=918.034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132536 Jy ! Component: 100 - total flux cleaned = -0.000199164 Jy ! Component: 150 - total flux cleaned = -0.000314986 Jy ! Component: 200 - total flux cleaned = -0.000466848 Jy ! Total flux subtracted in 200 components = -0.000466848 Jy ! Clean residual min=-0.004302 max=0.005306 Jy/beam ! Clean residual mean=0.000004 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.144595 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.144595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101817Jy sigma=0.000661 ! Fit after self-cal, rms=0.101862Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-115, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465541 Jy ! Component: 100 - total flux cleaned = 0.00593127 Jy ! Component: 150 - total flux cleaned = 0.00608749 Jy ! Component: 200 - total flux cleaned = 0.00628009 Jy ! Total flux subtracted in 200 components = 0.00628009 Jy ! Clean residual min=-0.003843 max=0.003692 Jy/beam ! Clean residual mean=0.000002 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.150875 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 168 components and 0.150875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101610Jy sigma=0.000659 ! Fit after self-cal, rms=0.101542Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101542Jy sigma=0.000659 ! Fit after self-cal, rms=0.101381Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=15.09 mas, bpa=-21.08 degrees ! Estimated noise=913.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194451 Jy ! Component: 100 - total flux cleaned = 0.00239451 Jy ! Component: 150 - total flux cleaned = 0.00263736 Jy ! Component: 200 - total flux cleaned = 0.00263552 Jy ! Total flux subtracted in 200 components = 0.00263552 Jy ! Clean residual min=-0.003357 max=0.003098 Jy/beam ! Clean residual mean=0.000001 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.15351 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 179 components and 0.15351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101271Jy sigma=0.000658 ! Fit after self-cal, rms=0.101236Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063739 Jy ! Component: 100 - total flux cleaned = 0.000687109 Jy ! Component: 150 - total flux cleaned = 0.000735024 Jy ! Component: 200 - total flux cleaned = 0.000645965 Jy ! Total flux subtracted in 200 components = 0.000645965 Jy ! Clean residual min=-0.003259 max=0.002969 Jy/beam ! Clean residual mean=-0.000002 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.154156 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 194 components and 0.154156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101181Jy sigma=0.000657 ! Fit after self-cal, rms=0.101163Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101163Jy sigma=0.000657 ! Fit after self-cal, rms=0.100887Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=22.47 mas, bpa=-10.79 degrees ! Estimated noise=1088.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146317 Jy ! Component: 100 - total flux cleaned = 0.00173787 Jy ! Component: 150 - total flux cleaned = 0.00167851 Jy ! Component: 200 - total flux cleaned = 0.00152363 Jy ! Total flux subtracted in 200 components = 0.00152363 Jy ! Clean residual min=-0.002939 max=0.003261 Jy/beam ! Clean residual mean=0.000001 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.15568 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 217 components and 0.15568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100854Jy sigma=0.000657 ! Fit after self-cal, rms=0.100844Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160675 Jy ! Component: 100 - total flux cleaned = 0.000114213 Jy ! Component: 150 - total flux cleaned = 0.000115956 Jy ! Component: 200 - total flux cleaned = 0.000115265 Jy ! Total flux subtracted in 200 components = 0.000115265 Jy ! Clean residual min=-0.002788 max=0.003117 Jy/beam ! Clean residual mean=-0.000002 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.155795 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 228 components and 0.155795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100831Jy sigma=0.000656 ! Fit after self-cal, rms=0.100821Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=15.13 mas, bpa=-21.08 degrees ! Estimated noise=910.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 15.13 at -21.08 degrees (North through East) ! Clean map min=-0.0037968 max=0.092625 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=13.18 mas, bpa=-21.09 degrees ! Estimated noise=1706.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735745 Jy ! Component: 100 - total flux cleaned = 0.0983371 Jy ! Component: 150 - total flux cleaned = 0.113289 Jy ! Component: 200 - total flux cleaned = 0.123835 Jy ! Total flux subtracted in 200 components = 0.123835 Jy ! Clean residual min=-0.005634 max=0.008039 Jy/beam ! Clean residual mean=-0.000015 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.123835 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.123835 Jy ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=15.13 mas, bpa=-21.08 degrees ! Estimated noise=910.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991008 Jy ! Component: 100 - total flux cleaned = 0.0158033 Jy ! Component: 150 - total flux cleaned = 0.0202832 Jy ! Component: 200 - total flux cleaned = 0.0237131 Jy ! Total flux subtracted in 200 components = 0.0237131 Jy ! Clean residual min=-0.003419 max=0.003177 Jy/beam ! Clean residual mean=-0.000004 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.147548 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 106 components and 0.147548 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=22.47 mas, bpa=-10.79 degrees ! Estimated noise=1088.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003585 Jy ! Component: 100 - total flux cleaned = 0.00472156 Jy ! Component: 150 - total flux cleaned = 0.00536552 Jy ! Component: 200 - total flux cleaned = 0.00590871 Jy ! Total flux subtracted in 200 components = 0.00590871 Jy ! Clean residual min=-0.002779 max=0.002554 Jy/beam ! Clean residual mean=-0.000006 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.153457 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604207 Jy ! Component: 100 - total flux cleaned = 0.00119392 Jy ! Component: 150 - total flux cleaned = 0.00156702 Jy ! Component: 200 - total flux cleaned = 0.00190738 Jy ! Total flux subtracted in 200 components = 0.00190738 Jy ! Clean residual min=-0.002476 max=0.002452 Jy/beam ! Clean residual mean=-0.000005 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.155365 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 200 components and 0.155365 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=15.13 mas, bpa=-21.08 degrees ! Estimated noise=910.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612219 Jy ! Component: 100 - total flux cleaned = 0.000821597 Jy ! Component: 150 - total flux cleaned = 0.00113931 Jy ! Component: 200 - total flux cleaned = 0.00119884 Jy ! Total flux subtracted in 200 components = 0.00119884 Jy ! Clean residual min=-0.002547 max=0.002439 Jy/beam ! Clean residual mean=-0.000003 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.156563 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 227 components and 0.156563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100692Jy sigma=0.000656 ! Fit after self-cal, rms=0.100575Jy sigma=0.000656 wmodel J0225-2312_S_2017_10_09_pus_map.mod ! Writing 227 model components to file: J0225-2312_S_2017_10_09_pus_map.mod wobs J0225-2312_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0225-2312_S_2017_10_09_pus_uvs.fits wwins J0225-2312_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0225-2312_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118729 Jy ! Component: 100 - total flux cleaned = -0.000336105 Jy ! Component: 150 - total flux cleaned = -0.000579179 Jy ! Component: 200 - total flux cleaned = -0.000808979 Jy ! Component: 250 - total flux cleaned = -0.00102927 Jy ! Component: 300 - total flux cleaned = -0.00117035 Jy ! Component: 350 - total flux cleaned = -0.00123777 Jy ! Component: 400 - total flux cleaned = -0.00120469 Jy ! Component: 450 - total flux cleaned = -0.00120403 Jy ! Component: 500 - total flux cleaned = -0.0011742 Jy ! Component: 550 - total flux cleaned = -0.00114532 Jy ! Component: 600 - total flux cleaned = -0.00105975 Jy ! Component: 650 - total flux cleaned = -0.00103262 Jy ! Component: 700 - total flux cleaned = -0.00103302 Jy ! Component: 750 - total flux cleaned = -0.00103294 Jy ! Component: 800 - total flux cleaned = -0.0010071 Jy ! Component: 850 - total flux cleaned = -0.0010073 Jy ! Component: 900 - total flux cleaned = -0.00098241 Jy ! Component: 950 - total flux cleaned = -0.00105451 Jy ! Component: 1000 - total flux cleaned = -0.000959374 Jy ! Component: 1050 - total flux cleaned = -0.000913224 Jy ! Component: 1100 - total flux cleaned = -0.000913329 Jy ! Component: 1150 - total flux cleaned = -0.000890624 Jy ! Component: 1200 - total flux cleaned = -0.000846033 Jy ! Component: 1250 - total flux cleaned = -0.000802855 Jy ! Component: 1300 - total flux cleaned = -0.000781547 Jy ! Component: 1350 - total flux cleaned = -0.000864909 Jy ! Component: 1400 - total flux cleaned = -0.000844146 Jy ! Component: 1450 - total flux cleaned = -0.000844529 Jy ! Component: 1500 - total flux cleaned = -0.000844625 Jy ! Component: 1550 - total flux cleaned = -0.000923255 Jy ! Component: 1600 - total flux cleaned = -0.00090367 Jy ! Component: 1650 - total flux cleaned = -0.000884497 Jy ! Component: 1700 - total flux cleaned = -0.000865447 Jy ! Component: 1750 - total flux cleaned = -0.00084725 Jy ! Component: 1800 - total flux cleaned = -0.000865886 Jy ! Component: 1850 - total flux cleaned = -0.000830297 Jy ! Component: 1900 - total flux cleaned = -0.000830784 Jy ! Component: 1950 - total flux cleaned = -0.000865938 Jy ! Component: 2000 - total flux cleaned = -0.000831282 Jy ! Component: 2050 - total flux cleaned = -0.000813972 Jy ! Component: 2100 - total flux cleaned = -0.000763348 Jy ! Component: 2150 - total flux cleaned = -0.000713517 Jy ! Component: 2200 - total flux cleaned = -0.000696968 Jy ! Component: 2250 - total flux cleaned = -0.000680915 Jy ! Component: 2300 - total flux cleaned = -0.000648778 Jy ! Component: 2350 - total flux cleaned = -0.000601218 Jy ! Component: 2400 - total flux cleaned = -0.000616961 Jy ! Component: 2450 - total flux cleaned = -0.000601477 Jy ! Component: 2500 - total flux cleaned = -0.000663064 Jy ! Component: 2550 - total flux cleaned = -0.000647839 Jy ! Component: 2600 - total flux cleaned = -0.000662941 Jy ! Component: 2650 - total flux cleaned = -0.000618394 Jy ! Component: 2700 - total flux cleaned = -0.000633087 Jy ! Component: 2750 - total flux cleaned = -0.000647597 Jy ! Component: 2800 - total flux cleaned = -0.000633135 Jy ! Component: 2850 - total flux cleaned = -0.000633056 Jy ! Component: 2900 - total flux cleaned = -0.000647092 Jy ! Component: 2950 - total flux cleaned = -0.000632928 Jy ! Component: 3000 - total flux cleaned = -0.000604864 Jy ! Component: 3050 - total flux cleaned = -0.000604874 Jy ! Component: 3100 - total flux cleaned = -0.000577513 Jy ! Component: 3150 - total flux cleaned = -0.000536954 Jy ! Component: 3200 - total flux cleaned = -0.000537 Jy ! Component: 3250 - total flux cleaned = -0.000523772 Jy ! Component: 3300 - total flux cleaned = -0.00051061 Jy ! Component: 3350 - total flux cleaned = -0.000523725 Jy ! Component: 3400 - total flux cleaned = -0.000484622 Jy ! Component: 3450 - total flux cleaned = -0.000536321 Jy ! Component: 3500 - total flux cleaned = -0.000472269 Jy ! Component: 3550 - total flux cleaned = -0.000472322 Jy ! Component: 3600 - total flux cleaned = -0.000434577 Jy ! Component: 3650 - total flux cleaned = -0.000409573 Jy ! Component: 3700 - total flux cleaned = -0.000446857 Jy ! Component: 3750 - total flux cleaned = -0.000434573 Jy ! Component: 3800 - total flux cleaned = -0.000410004 Jy ! Component: 3850 - total flux cleaned = -0.000385489 Jy ! Component: 3900 - total flux cleaned = -0.000337036 Jy ! Component: 3950 - total flux cleaned = -0.000301006 Jy ! Component: 4000 - total flux cleaned = -0.000301056 Jy ! Component: 4050 - total flux cleaned = -0.000218141 Jy ! Total flux subtracted in 4096 components = -0.000206379 Jy ! Clean residual min=-0.000593 max=0.000629 Jy/beam ! Clean residual mean=0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.156357 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 473 components and 0.156357 Jy ![Exited script file: muppet] wmap "J0225-2312_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 15.13 at -21.08 degrees (North through East) ! Clean map min=-0.0030388 max=0.094494 Jy/beam ! Writing clean map to FITS file: J0225-2312_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0944944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210095 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.667009 0.667009 1.33402 2.66804 5.33607 10.6721 21.3443 42.6886 85.3772 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 15.13 at -21.08 degrees (North through East) ! Clean map min=-0.0030388 max=0.094494 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0225-2312_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:41 2019