! Started logfile: J0224+0659_S_2017_03_23_pus_uvs.log on Mon May 13 09:45:49 2019 obs J0224+0659_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0224+0659_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697222 visibilities/baseline/integration-bin. ! Found source: J0224+0659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0224+0659_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709259Jy sigma=0.005365 ! Fit after self-cal, rms=0.680385Jy sigma=0.005156 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=6.951 mas, bpa=-14.06 degrees ! Estimated noise=3735.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247446 Jy ! Component: 100 - total flux cleaned = 0.320357 Jy ! Total flux subtracted in 100 components = 0.320357 Jy ! Clean residual min=-0.028095 max=0.034430 Jy/beam ! Clean residual mean=-0.000329 rms=0.007782 Jy/beam ! Combined flux in latest and established models = 0.320357 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.320357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139898Jy sigma=0.000931 ! Fit after self-cal, rms=0.139795Jy sigma=0.000930 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.466 mas, bpa=-10.65 degrees ! Estimated noise=3242.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414171 Jy ! Component: 100 - total flux cleaned = 0.0624324 Jy ! Component: 150 - total flux cleaned = 0.0752075 Jy ! Component: 200 - total flux cleaned = 0.0832873 Jy ! Total flux subtracted in 200 components = 0.0832873 Jy ! Clean residual min=-0.021683 max=0.023332 Jy/beam ! Clean residual mean=-0.000263 rms=0.005715 Jy/beam ! Combined flux in latest and established models = 0.403645 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 0.403645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127169Jy sigma=0.000828 ! Fit after self-cal, rms=0.127129Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.96 KP 1.06 ! LA 0.97 MK 0.96 NL 0.89 OV 1.11 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 1.03 KP 0.98 ! LA 0.94 MK 0.89 NL 1.09 OV 1.09 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00 KP 0.84 ! LA 0.74 MK 0.93 NL 1.11 OV 1.04 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* HN 0.91 KP 1.00* ! LA 0.64 MK 1.81 NL 1.00* OV 5.35 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.127129Jy sigma=0.000828 ! Fit after self-cal, rms=0.122933Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=7.521 mas, bpa=-10.03 degrees ! Estimated noise=3211.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126187 Jy ! Component: 100 - total flux cleaned = -0.00139886 Jy ! Component: 150 - total flux cleaned = -0.00152622 Jy ! Component: 200 - total flux cleaned = -0.00152269 Jy ! Total flux subtracted in 200 components = -0.00152269 Jy ! Clean residual min=-0.009394 max=0.010657 Jy/beam ! Clean residual mean=-0.000036 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 0.402122 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.402122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122611Jy sigma=0.000663 ! Fit after self-cal, rms=0.122824Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122824Jy sigma=0.000663 ! Fit after self-cal, rms=0.123298Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.452 mas, bmaj=7.526 mas, bpa=-9.975 degrees ! Estimated noise=3218.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248041 Jy ! Component: 100 - total flux cleaned = -0.000345783 Jy ! Component: 150 - total flux cleaned = -0.00043086 Jy ! Component: 200 - total flux cleaned = -0.000507221 Jy ! Total flux subtracted in 200 components = -0.000507221 Jy ! Clean residual min=-0.009277 max=0.009750 Jy/beam ! Clean residual mean=-0.000033 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.401615 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.401615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123159Jy sigma=0.000661 ! Fit after self-cal, rms=0.123139Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764205 Jy ! Component: 100 - total flux cleaned = 0.00779806 Jy ! Component: 150 - total flux cleaned = 0.00768897 Jy ! Component: 200 - total flux cleaned = 0.00760281 Jy ! Total flux subtracted in 200 components = 0.00760281 Jy ! Clean residual min=-0.008815 max=0.007438 Jy/beam ! Clean residual mean=-0.000008 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 0.409218 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 79 components and 0.409218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122624Jy sigma=0.000656 ! Fit after self-cal, rms=0.122592Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122592Jy sigma=0.000655 ! Fit after self-cal, rms=0.122846Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=7.523 mas, bpa=-9.985 degrees ! Estimated noise=3214.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178562 Jy ! Component: 100 - total flux cleaned = 0.0017932 Jy ! Component: 150 - total flux cleaned = 0.00158244 Jy ! Component: 200 - total flux cleaned = 0.00132318 Jy ! Total flux subtracted in 200 components = 0.00132318 Jy ! Clean residual min=-0.008277 max=0.007181 Jy/beam ! Clean residual mean=-0.000008 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.410541 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.410541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122756Jy sigma=0.000654 ! Fit after self-cal, rms=0.122749Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498977 Jy ! Component: 100 - total flux cleaned = 0.00033181 Jy ! Component: 150 - total flux cleaned = 0.000229067 Jy ! Component: 200 - total flux cleaned = 0.000228523 Jy ! Total flux subtracted in 200 components = 0.000228523 Jy ! Clean residual min=-0.008057 max=0.007009 Jy/beam ! Clean residual mean=-0.000007 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.410769 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.410769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122707Jy sigma=0.000654 ! Fit after self-cal, rms=0.122702Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122702Jy sigma=0.000653 ! Fit after self-cal, rms=0.122941Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=11.35 mas, bpa=6.169 degrees ! Estimated noise=3913.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223628 Jy ! Component: 100 - total flux cleaned = -0.000505232 Jy ! Component: 150 - total flux cleaned = -0.000628648 Jy ! Component: 200 - total flux cleaned = -0.00079668 Jy ! Total flux subtracted in 200 components = -0.00079668 Jy ! Clean residual min=-0.008009 max=0.008289 Jy/beam ! Clean residual mean=-0.000026 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 0.409973 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 112 components and 0.409973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122878Jy sigma=0.000653 ! Fit after self-cal, rms=0.122873Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384591 Jy ! Component: 100 - total flux cleaned = -0.000382241 Jy ! Component: 150 - total flux cleaned = -0.000383557 Jy ! Component: 200 - total flux cleaned = -0.000467187 Jy ! Total flux subtracted in 200 components = -0.000467187 Jy ! Clean residual min=-0.007763 max=0.008165 Jy/beam ! Clean residual mean=-0.000028 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 0.409506 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 124 components and 0.409506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122842Jy sigma=0.000653 ! Fit after self-cal, rms=0.122843Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.521 mas, bpa=-9.972 degrees ! Estimated noise=3212.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 7.521 at -9.972 degrees (North through East) ! Clean map min=-0.0071845 max=0.3214 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=6.974 mas, bpa=-13.17 degrees ! Estimated noise=3742.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247303 Jy ! Component: 100 - total flux cleaned = 0.320797 Jy ! Component: 150 - total flux cleaned = 0.355087 Jy ! Component: 200 - total flux cleaned = 0.373239 Jy ! Total flux subtracted in 200 components = 0.373239 Jy ! Clean residual min=-0.011407 max=0.011709 Jy/beam ! Clean residual mean=-0.000077 rms=0.002876 Jy/beam ! Combined flux in latest and established models = 0.373239 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.373239 Jy ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.521 mas, bpa=-9.972 degrees ! Estimated noise=3212.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147064 Jy ! Component: 100 - total flux cleaned = 0.023939 Jy ! Component: 150 - total flux cleaned = 0.0299729 Jy ! Component: 200 - total flux cleaned = 0.0330694 Jy ! Total flux subtracted in 200 components = 0.0330694 Jy ! Clean residual min=-0.009044 max=0.007359 Jy/beam ! Clean residual mean=-0.000024 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.406309 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.406309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=11.35 mas, bpa=6.169 degrees ! Estimated noise=3913.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251631 Jy ! Component: 100 - total flux cleaned = 0.00370531 Jy ! Component: 150 - total flux cleaned = 0.004134 Jy ! Component: 200 - total flux cleaned = 0.00394421 Jy ! Total flux subtracted in 200 components = 0.00394421 Jy ! Clean residual min=-0.008851 max=0.008611 Jy/beam ! Clean residual mean=-0.000026 rms=0.002503 Jy/beam ! Combined flux in latest and established models = 0.410253 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.75394e-05 Jy ! Component: 100 - total flux cleaned = -0.000172286 Jy ! Component: 150 - total flux cleaned = -0.000333217 Jy ! Component: 200 - total flux cleaned = -0.000409585 Jy ! Total flux subtracted in 200 components = -0.000409585 Jy ! Clean residual min=-0.008544 max=0.008428 Jy/beam ! Clean residual mean=-0.000028 rms=0.002425 Jy/beam ! Combined flux in latest and established models = 0.409843 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 80 components and 0.409843 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.521 mas, bpa=-9.972 degrees ! Estimated noise=3212.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000421806 Jy ! Component: 100 - total flux cleaned = -0.000145228 Jy ! Component: 150 - total flux cleaned = -0.000143174 Jy ! Component: 200 - total flux cleaned = -0.00021772 Jy ! Total flux subtracted in 200 components = -0.00021772 Jy ! Clean residual min=-0.007892 max=0.006947 Jy/beam ! Clean residual mean=-0.000014 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.409626 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.409626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123000Jy sigma=0.000654 ! Fit after self-cal, rms=0.123003Jy sigma=0.000654 wmodel J0224+0659_S_2017_03_23_pus_map.mod ! Writing 97 model components to file: J0224+0659_S_2017_03_23_pus_map.mod wobs J0224+0659_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0224+0659_S_2017_03_23_pus_uvs.fits wwins J0224+0659_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0224+0659_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000769987 Jy ! Component: 100 - total flux cleaned = -0.000645436 Jy ! Component: 150 - total flux cleaned = -0.000976892 Jy ! Component: 200 - total flux cleaned = -0.00149518 Jy ! Component: 250 - total flux cleaned = -0.00188292 Jy ! Component: 300 - total flux cleaned = -0.00224846 Jy ! Component: 350 - total flux cleaned = -0.00224839 Jy ! Component: 400 - total flux cleaned = -0.00241137 Jy ! Component: 450 - total flux cleaned = -0.00225228 Jy ! Component: 500 - total flux cleaned = -0.00210015 Jy ! Component: 550 - total flux cleaned = -0.00217509 Jy ! Component: 600 - total flux cleaned = -0.00224447 Jy ! Component: 650 - total flux cleaned = -0.00217382 Jy ! Component: 700 - total flux cleaned = -0.00210633 Jy ! Component: 750 - total flux cleaned = -0.00204343 Jy ! Component: 800 - total flux cleaned = -0.00223227 Jy ! Component: 850 - total flux cleaned = -0.0021741 Jy ! Component: 900 - total flux cleaned = -0.00241081 Jy ! Component: 950 - total flux cleaned = -0.0025271 Jy ! Component: 1000 - total flux cleaned = -0.00275147 Jy ! Component: 1050 - total flux cleaned = -0.00286024 Jy ! Component: 1100 - total flux cleaned = -0.00296658 Jy ! Component: 1150 - total flux cleaned = -0.00307162 Jy ! Component: 1200 - total flux cleaned = -0.00312303 Jy ! Component: 1250 - total flux cleaned = -0.00322424 Jy ! Component: 1300 - total flux cleaned = -0.00322499 Jy ! Component: 1350 - total flux cleaned = -0.00322569 Jy ! Component: 1400 - total flux cleaned = -0.0033689 Jy ! Component: 1450 - total flux cleaned = -0.00327436 Jy ! Component: 1500 - total flux cleaned = -0.00327429 Jy ! Component: 1550 - total flux cleaned = -0.00318314 Jy ! Component: 1600 - total flux cleaned = -0.00309325 Jy ! Component: 1650 - total flux cleaned = -0.00291688 Jy ! Component: 1700 - total flux cleaned = -0.002787 Jy ! Component: 1750 - total flux cleaned = -0.00270136 Jy ! Component: 1800 - total flux cleaned = -0.00257443 Jy ! Component: 1850 - total flux cleaned = -0.00240677 Jy ! Component: 1900 - total flux cleaned = -0.00224162 Jy ! Component: 1950 - total flux cleaned = -0.0019976 Jy ! Component: 2000 - total flux cleaned = -0.00191691 Jy ! Component: 2050 - total flux cleaned = -0.0017171 Jy ! Component: 2100 - total flux cleaned = -0.00151989 Jy ! Component: 2150 - total flux cleaned = -0.00120793 Jy ! Component: 2200 - total flux cleaned = -0.000938786 Jy ! Component: 2250 - total flux cleaned = -0.000748617 Jy ! Component: 2300 - total flux cleaned = -0.000408992 Jy ! Component: 2350 - total flux cleaned = -0.000259272 Jy ! Component: 2400 - total flux cleaned = -7.39805e-05 Jy ! Component: 2450 - total flux cleaned = 0.000110443 Jy ! Component: 2500 - total flux cleaned = 0.000365477 Jy ! Component: 2550 - total flux cleaned = 0.000510119 Jy ! Component: 2600 - total flux cleaned = 0.000725573 Jy ! Component: 2650 - total flux cleaned = 0.00108105 Jy ! Component: 2700 - total flux cleaned = 0.00125736 Jy ! Component: 2750 - total flux cleaned = 0.0014325 Jy ! Component: 2800 - total flux cleaned = 0.00171074 Jy ! Component: 2850 - total flux cleaned = 0.00198677 Jy ! Component: 2900 - total flux cleaned = 0.00215828 Jy ! Component: 2950 - total flux cleaned = 0.00229488 Jy ! Component: 3000 - total flux cleaned = 0.00259968 Jy ! Component: 3050 - total flux cleaned = 0.00286854 Jy ! Component: 3100 - total flux cleaned = 0.00303546 Jy ! Component: 3150 - total flux cleaned = 0.00330118 Jy ! Component: 3200 - total flux cleaned = 0.00356484 Jy ! Component: 3250 - total flux cleaned = 0.00372865 Jy ! Component: 3300 - total flux cleaned = 0.004022 Jy ! Component: 3350 - total flux cleaned = 0.00418387 Jy ! Component: 3400 - total flux cleaned = 0.00447321 Jy ! Component: 3450 - total flux cleaned = 0.00472919 Jy ! Component: 3500 - total flux cleaned = 0.00501563 Jy ! Component: 3550 - total flux cleaned = 0.00533172 Jy ! Component: 3600 - total flux cleaned = 0.00548876 Jy ! Component: 3650 - total flux cleaned = 0.0057082 Jy ! Component: 3700 - total flux cleaned = 0.00602003 Jy ! Component: 3750 - total flux cleaned = 0.00614443 Jy ! Component: 3800 - total flux cleaned = 0.00633019 Jy ! Component: 3850 - total flux cleaned = 0.00648421 Jy ! Component: 3900 - total flux cleaned = 0.0067911 Jy ! Component: 3950 - total flux cleaned = 0.00682167 Jy ! Component: 4000 - total flux cleaned = 0.00703494 Jy ! Component: 4050 - total flux cleaned = 0.00718696 Jy ! Total flux subtracted in 4096 components = 0.00733842 Jy ! Clean residual min=-0.002608 max=0.001594 Jy/beam ! Clean residual mean=0.000016 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.416964 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 346 components and 0.416964 Jy ![Exited script file: muppet] wmap "J0224+0659_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 7.521 at -9.972 degrees (North through East) ! Clean map min=-0.0040467 max=0.32455 Jy/beam ! Writing clean map to FITS file: J0224+0659_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.32455 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000496289 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.458747 0.458747 0.917494 1.83499 3.66998 7.33995 14.6799 29.3598 58.7196 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.324 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 7.521 at -9.972 degrees (North through East) ! Clean map min=-0.0040467 max=0.32455 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0224+0659_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:45:56 2019