! Started logfile: J0219+4806_S_2017_06_15_pus_uvs.log on Tue May 7 15:09:21 2019 obs J0219+4806_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0219+4806_S_2017_06_15_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.675123 visibilities/baseline/integration-bin. ! Found source: J0219+4806 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 13732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0219+4806_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 657 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966645Jy sigma=0.009556 ! Fit after self-cal, rms=0.945694Jy sigma=0.009385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=4.431 mas, bpa=-6.974 degrees ! Estimated noise=1139.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420673 Jy ! Component: 100 - total flux cleaned = 0.0518634 Jy ! Total flux subtracted in 100 components = 0.0518634 Jy ! Clean residual min=-0.003449 max=0.007178 Jy/beam ! Clean residual mean=0.000005 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.0518634 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0518634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071880Jy sigma=0.000669 ! Fit after self-cal, rms=0.071763Jy sigma=0.000668 ! Inverting map ! Added new window around map position (-10, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648745 Jy ! Component: 100 - total flux cleaned = 0.0102831 Jy ! Total flux subtracted in 100 components = 0.0102831 Jy ! Clean residual min=-0.003010 max=0.002976 Jy/beam ! Clean residual mean=0.000003 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0621465 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.0621465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071006Jy sigma=0.000660 ! Fit after self-cal, rms=0.070951Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=5.273 mas, bpa=-8.782 degrees ! Estimated noise=686.779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479281 Jy ! Component: 100 - total flux cleaned = 0.00747312 Jy ! Component: 150 - total flux cleaned = 0.00914452 Jy ! Component: 200 - total flux cleaned = 0.0102164 Jy ! Total flux subtracted in 200 components = 0.0102164 Jy ! Clean residual min=-0.002090 max=0.002052 Jy/beam ! Clean residual mean=0.000007 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0723629 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.0723629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070619Jy sigma=0.000656 ! Fit after self-cal, rms=0.070585Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.01 KP 1.02 ! LA 1.07 MK 1.04 NL 0.95 OV 1.03 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.05 HN 1.02 KP 0.92 ! LA 0.91 MK 1.10 NL 1.07 OV 1.09 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.12 HN 1.05 KP 1.00 ! LA 0.95 MK 1.01 NL 0.99 OV 1.00 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.91 KP 1.00* ! LA 0.99 MK 0.91 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.070585Jy sigma=0.000655 ! Fit after self-cal, rms=0.069213Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=5.269 mas, bpa=-8.066 degrees ! Estimated noise=681.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015656 Jy ! Component: 100 - total flux cleaned = 0.00190321 Jy ! Component: 150 - total flux cleaned = 0.00197576 Jy ! Component: 200 - total flux cleaned = 0.00206337 Jy ! Total flux subtracted in 200 components = 0.00206337 Jy ! Clean residual min=-0.001827 max=0.001994 Jy/beam ! Clean residual mean=0.000007 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0744262 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.0744262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069179Jy sigma=0.000653 ! Fit after self-cal, rms=0.069137Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069137Jy sigma=0.000653 ! Fit after self-cal, rms=0.068711Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=5.273 mas, bpa=-8.375 degrees ! Estimated noise=681.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471968 Jy ! Component: 100 - total flux cleaned = 0.000662364 Jy ! Component: 150 - total flux cleaned = 0.000751668 Jy ! Component: 200 - total flux cleaned = 0.000781214 Jy ! Total flux subtracted in 200 components = 0.000781214 Jy ! Clean residual min=-0.001805 max=0.001730 Jy/beam ! Clean residual mean=0.000004 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0752074 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.0752074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068695Jy sigma=0.000651 ! Fit after self-cal, rms=0.068710Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246175 Jy ! Component: 100 - total flux cleaned = 0.000317881 Jy ! Component: 150 - total flux cleaned = 0.000317591 Jy ! Component: 200 - total flux cleaned = 0.000317744 Jy ! Total flux subtracted in 200 components = 0.000317744 Jy ! Clean residual min=-0.001789 max=0.001767 Jy/beam ! Clean residual mean=0.000004 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0755252 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.0755252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068704Jy sigma=0.000651 ! Fit after self-cal, rms=0.068705Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068705Jy sigma=0.000651 ! Fit after self-cal, rms=0.068700Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=5.281 mas, bpa=-8.538 degrees ! Estimated noise=680.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016831 Jy ! Component: 100 - total flux cleaned = 0.000277718 Jy ! Component: 150 - total flux cleaned = 0.000303525 Jy ! Component: 200 - total flux cleaned = 0.000315457 Jy ! Total flux subtracted in 200 components = 0.000315457 Jy ! Clean residual min=-0.001756 max=0.001736 Jy/beam ! Clean residual mean=0.000004 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0758406 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.0758406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068694Jy sigma=0.000651 ! Fit after self-cal, rms=0.068701Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116804 Jy ! Component: 100 - total flux cleaned = 0.000151871 Jy ! Component: 150 - total flux cleaned = 0.000151684 Jy ! Component: 200 - total flux cleaned = 0.000172304 Jy ! Total flux subtracted in 200 components = 0.000172304 Jy ! Clean residual min=-0.001747 max=0.001742 Jy/beam ! Clean residual mean=0.000004 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0760129 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.0760129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068698Jy sigma=0.000651 ! Fit after self-cal, rms=0.068698Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068698Jy sigma=0.000651 ! Fit after self-cal, rms=0.068645Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=8.839 mas, bpa=-16.08 degrees ! Estimated noise=843.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376885 Jy ! Component: 100 - total flux cleaned = 0.000422858 Jy ! Component: 150 - total flux cleaned = 0.000422815 Jy ! Component: 200 - total flux cleaned = 0.000414399 Jy ! Total flux subtracted in 200 components = 0.000414399 Jy ! Clean residual min=-0.001737 max=0.001943 Jy/beam ! Clean residual mean=0.000007 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0764273 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.0764273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068646Jy sigma=0.000651 ! Fit after self-cal, rms=0.068647Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.0457e-05 Jy ! Component: 100 - total flux cleaned = 7.01322e-05 Jy ! Component: 150 - total flux cleaned = 6.22478e-05 Jy ! Component: 200 - total flux cleaned = 5.55063e-05 Jy ! Total flux subtracted in 200 components = 5.55063e-05 Jy ! Clean residual min=-0.001727 max=0.001940 Jy/beam ! Clean residual mean=0.000007 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0764828 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.0764828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068648Jy sigma=0.000651 ! Fit after self-cal, rms=0.068647Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=5.287 mas, bpa=-8.623 degrees ! Estimated noise=679.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.473 x 5.287 at -8.623 degrees (North through East) ! Clean map min=-0.0016595 max=0.053811 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=4.442 mas, bpa=-6.85 degrees ! Estimated noise=1129.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412171 Jy ! Component: 100 - total flux cleaned = 0.0534344 Jy ! Component: 150 - total flux cleaned = 0.0600244 Jy ! Component: 200 - total flux cleaned = 0.0645216 Jy ! Total flux subtracted in 200 components = 0.0645216 Jy ! Clean residual min=-0.002639 max=0.002577 Jy/beam ! Clean residual mean=0.000003 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0645216 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0645216 Jy ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=5.287 mas, bpa=-8.623 degrees ! Estimated noise=679.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046722 Jy ! Component: 100 - total flux cleaned = 0.00747024 Jy ! Component: 150 - total flux cleaned = 0.00924315 Jy ! Component: 200 - total flux cleaned = 0.0102737 Jy ! Total flux subtracted in 200 components = 0.0102737 Jy ! Clean residual min=-0.001990 max=0.001774 Jy/beam ! Clean residual mean=0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0747953 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 0.0747953 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=8.839 mas, bpa=-16.08 degrees ! Estimated noise=843.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112883 Jy ! Component: 100 - total flux cleaned = 0.00154773 Jy ! Component: 150 - total flux cleaned = 0.00162764 Jy ! Component: 200 - total flux cleaned = 0.00169413 Jy ! Total flux subtracted in 200 components = 0.00169413 Jy ! Clean residual min=-0.001810 max=0.001981 Jy/beam ! Clean residual mean=0.000007 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0764894 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (104.5, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168051 Jy ! Component: 100 - total flux cleaned = 0.0022429 Jy ! Component: 150 - total flux cleaned = 0.00229583 Jy ! Component: 200 - total flux cleaned = 0.00236692 Jy ! Total flux subtracted in 200 components = 0.00236692 Jy ! Clean residual min=-0.001595 max=0.001398 Jy/beam ! Clean residual mean=0.000005 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0788563 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 75 components and 0.0788563 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=5.287 mas, bpa=-8.623 degrees ! Estimated noise=679.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365073 Jy ! Component: 100 - total flux cleaned = 0.000447298 Jy ! Component: 150 - total flux cleaned = 0.000559097 Jy ! Component: 200 - total flux cleaned = 0.000593509 Jy ! Total flux subtracted in 200 components = 0.000593509 Jy ! Clean residual min=-0.001578 max=0.001452 Jy/beam ! Clean residual mean=0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0794498 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.0794498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068594Jy sigma=0.000650 ! Fit after self-cal, rms=0.068593Jy sigma=0.000650 wmodel J0219+4806_S_2017_06_15_pus_map.mod ! Writing 100 model components to file: J0219+4806_S_2017_06_15_pus_map.mod wobs J0219+4806_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0219+4806_S_2017_06_15_pus_uvs.fits wwins J0219+4806_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J0219+4806_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235397 Jy ! Component: 100 - total flux cleaned = -0.000210155 Jy ! Component: 150 - total flux cleaned = -5.98862e-05 Jy ! Component: 200 - total flux cleaned = 6.12455e-05 Jy ! Component: 250 - total flux cleaned = 0.000154543 Jy ! Component: 300 - total flux cleaned = 0.000222454 Jy ! Component: 350 - total flux cleaned = 0.000310021 Jy ! Component: 400 - total flux cleaned = 0.000395871 Jy ! Component: 450 - total flux cleaned = 0.000479251 Jy ! Component: 500 - total flux cleaned = 0.000540188 Jy ! Component: 550 - total flux cleaned = 0.000560145 Jy ! Component: 600 - total flux cleaned = 0.000619246 Jy ! Component: 650 - total flux cleaned = 0.000657828 Jy ! Component: 700 - total flux cleaned = 0.000696041 Jy ! Component: 750 - total flux cleaned = 0.000715115 Jy ! Component: 800 - total flux cleaned = 0.000752151 Jy ! Component: 850 - total flux cleaned = 0.00073411 Jy ! Component: 900 - total flux cleaned = 0.000716141 Jy ! Component: 950 - total flux cleaned = 0.000733756 Jy ! Component: 1000 - total flux cleaned = 0.000681907 Jy ! Component: 1050 - total flux cleaned = 0.000716132 Jy ! Component: 1100 - total flux cleaned = 0.00076632 Jy ! Component: 1150 - total flux cleaned = 0.000782663 Jy ! Component: 1200 - total flux cleaned = 0.000815365 Jy ! Component: 1250 - total flux cleaned = 0.000879751 Jy ! Component: 1300 - total flux cleaned = 0.000863722 Jy ! Component: 1350 - total flux cleaned = 0.000848195 Jy ! Component: 1400 - total flux cleaned = 0.000863593 Jy ! Component: 1450 - total flux cleaned = 0.000817314 Jy ! Component: 1500 - total flux cleaned = 0.000832373 Jy ! Component: 1550 - total flux cleaned = 0.000862408 Jy ! Component: 1600 - total flux cleaned = 0.000847839 Jy ! Component: 1650 - total flux cleaned = 0.000862209 Jy ! Component: 1700 - total flux cleaned = 0.000847638 Jy ! Component: 1750 - total flux cleaned = 0.00086196 Jy ! Component: 1800 - total flux cleaned = 0.000876135 Jy ! Component: 1850 - total flux cleaned = 0.000819752 Jy ! Component: 1900 - total flux cleaned = 0.000805747 Jy ! Component: 1950 - total flux cleaned = 0.00080565 Jy ! Component: 2000 - total flux cleaned = 0.000832913 Jy ! Component: 2050 - total flux cleaned = 0.000764902 Jy ! Component: 2100 - total flux cleaned = 0.000778301 Jy ! Component: 2150 - total flux cleaned = 0.000751817 Jy ! Component: 2200 - total flux cleaned = 0.000751647 Jy ! Component: 2250 - total flux cleaned = 0.000738637 Jy ! Component: 2300 - total flux cleaned = 0.000738741 Jy ! Component: 2350 - total flux cleaned = 0.000777434 Jy ! Component: 2400 - total flux cleaned = 0.000752026 Jy ! Component: 2450 - total flux cleaned = 0.000789931 Jy ! Component: 2500 - total flux cleaned = 0.000764872 Jy ! Component: 2550 - total flux cleaned = 0.000702785 Jy ! Component: 2600 - total flux cleaned = 0.000764373 Jy ! Component: 2650 - total flux cleaned = 0.000752133 Jy ! Component: 2700 - total flux cleaned = 0.000727834 Jy ! Component: 2750 - total flux cleaned = 0.000667839 Jy ! Component: 2800 - total flux cleaned = 0.000691817 Jy ! Component: 2850 - total flux cleaned = 0.000668124 Jy ! Component: 2900 - total flux cleaned = 0.000691442 Jy ! Component: 2950 - total flux cleaned = 0.000691515 Jy ! Component: 3000 - total flux cleaned = 0.000656792 Jy ! Component: 3050 - total flux cleaned = 0.000668326 Jy ! Component: 3100 - total flux cleaned = 0.000645409 Jy ! Component: 3150 - total flux cleaned = 0.000634027 Jy ! Component: 3200 - total flux cleaned = 0.000633908 Jy ! Component: 3250 - total flux cleaned = 0.000622978 Jy ! Component: 3300 - total flux cleaned = 0.000645148 Jy ! Component: 3350 - total flux cleaned = 0.000678149 Jy ! Component: 3400 - total flux cleaned = 0.000710896 Jy ! Component: 3450 - total flux cleaned = 0.000710876 Jy ! Component: 3500 - total flux cleaned = 0.000732354 Jy ! Component: 3550 - total flux cleaned = 0.00077509 Jy ! Component: 3600 - total flux cleaned = 0.000743204 Jy ! Component: 3650 - total flux cleaned = 0.000743147 Jy ! Component: 3700 - total flux cleaned = 0.000764163 Jy ! Component: 3750 - total flux cleaned = 0.000795449 Jy ! Component: 3800 - total flux cleaned = 0.000795435 Jy ! Component: 3850 - total flux cleaned = 0.000826297 Jy ! Component: 3900 - total flux cleaned = 0.000836585 Jy ! Component: 3950 - total flux cleaned = 0.000816204 Jy ! Component: 4000 - total flux cleaned = 0.000856656 Jy ! Component: 4050 - total flux cleaned = 0.000876758 Jy ! Total flux subtracted in 4096 components = 0.000886742 Jy ! Clean residual min=-0.000521 max=0.000588 Jy/beam ! Clean residual mean=0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0803366 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 384 components and 0.0803366 Jy ![Exited script file: muppet] wmap "J0219+4806_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.473 x 5.287 at -8.623 degrees (North through East) ! Clean map min=-0.00092891 max=0.053431 Jy/beam ! Writing clean map to FITS file: J0219+4806_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0534311 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171197 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.961221 0.961221 1.92244 3.84488 7.68976 15.3795 30.7591 61.5181 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.473 x 5.287 at -8.623 degrees (North through East) ! Clean map min=-0.00092891 max=0.053431 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0219+4806_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:09:26 2019