! Started logfile: J0217+0144_S_2017_07_09_pus_uvs.log on Wed May 8 14:39:34 2019 obs J0217+0144_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0217+0144_S_2017_07_09_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.57265 visibilities/baseline/integration-bin. ! Found source: J0217+0144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0217+0144_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.579865Jy sigma=0.005043 ! Fit after self-cal, rms=0.560493Jy sigma=0.004888 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.867 mas, bmaj=16.27 mas, bpa=-13.21 degrees ! Estimated noise=2919.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.336791 Jy ! Component: 100 - total flux cleaned = 0.417574 Jy ! Total flux subtracted in 100 components = 0.417574 Jy ! Clean residual min=-0.019413 max=0.032934 Jy/beam ! Clean residual mean=0.000105 rms=0.006091 Jy/beam ! Combined flux in latest and established models = 0.417574 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.417574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098447Jy sigma=0.000807 ! Fit after self-cal, rms=0.098391Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.799 mas, bmaj=16.88 mas, bpa=-16.03 degrees ! Estimated noise=2517.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387146 Jy ! Component: 100 - total flux cleaned = 0.0536554 Jy ! Component: 150 - total flux cleaned = 0.0562608 Jy ! Component: 200 - total flux cleaned = 0.0571352 Jy ! Total flux subtracted in 200 components = 0.0571352 Jy ! Clean residual min=-0.010654 max=0.010224 Jy/beam ! Clean residual mean=0.000026 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.474709 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.474709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083349Jy sigma=0.000690 ! Fit after self-cal, rms=0.083128Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.98 KP 1.01 ! LA 0.98 MK 1.00* NL 0.92 OV 1.04 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.01 KP 1.02 ! LA 0.98 MK 1.00* NL 1.05 OV 1.05 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 1.00 KP 0.97 ! LA 0.99 MK 1.00* NL 1.00 OV 0.98 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.98 KP 1.00* ! LA 0.99 MK 1.00* NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.083128Jy sigma=0.000688 ! Fit after self-cal, rms=0.077752Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.795 mas, bmaj=16.75 mas, bpa=-16.06 degrees ! Estimated noise=2507.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034721 Jy ! Component: 100 - total flux cleaned = 0.00367369 Jy ! Component: 150 - total flux cleaned = 0.00374853 Jy ! Component: 200 - total flux cleaned = 0.00392838 Jy ! Total flux subtracted in 200 components = 0.00392838 Jy ! Clean residual min=-0.008746 max=0.006850 Jy/beam ! Clean residual mean=0.000024 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.478638 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 0.478638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077500Jy sigma=0.000654 ! Fit after self-cal, rms=0.077462Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077462Jy sigma=0.000654 ! Fit after self-cal, rms=0.077365Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.791 mas, bmaj=16.74 mas, bpa=-16.05 degrees ! Estimated noise=2506.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174756 Jy ! Component: 100 - total flux cleaned = 0.00204969 Jy ! Component: 150 - total flux cleaned = 0.00215617 Jy ! Component: 200 - total flux cleaned = 0.0022974 Jy ! Total flux subtracted in 200 components = 0.0022974 Jy ! Clean residual min=-0.008484 max=0.006261 Jy/beam ! Clean residual mean=0.000026 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.480935 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.480935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077282Jy sigma=0.000653 ! Fit after self-cal, rms=0.077271Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021626 Jy ! Component: 100 - total flux cleaned = 0.000255633 Jy ! Component: 150 - total flux cleaned = 0.000293918 Jy ! Component: 200 - total flux cleaned = 0.000295226 Jy ! Total flux subtracted in 200 components = 0.000295226 Jy ! Clean residual min=-0.008403 max=0.005936 Jy/beam ! Clean residual mean=0.000026 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.48123 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.48123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077235Jy sigma=0.000652 ! Fit after self-cal, rms=0.077230Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077230Jy sigma=0.000652 ! Fit after self-cal, rms=0.077153Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.787 mas, bmaj=16.73 mas, bpa=-16.04 degrees ! Estimated noise=2504.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999376 Jy ! Component: 100 - total flux cleaned = 0.00116802 Jy ! Component: 150 - total flux cleaned = 0.00132025 Jy ! Component: 200 - total flux cleaned = 0.00139207 Jy ! Total flux subtracted in 200 components = 0.00139207 Jy ! Clean residual min=-0.008247 max=0.005841 Jy/beam ! Clean residual mean=0.000026 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.482622 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.482622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077116Jy sigma=0.000652 ! Fit after self-cal, rms=0.077112Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92503e-06 Jy ! Component: 100 - total flux cleaned = -3.87115e-06 Jy ! Component: 150 - total flux cleaned = -4.16301e-06 Jy ! Component: 200 - total flux cleaned = -3.5793e-06 Jy ! Total flux subtracted in 200 components = -3.5793e-06 Jy ! Clean residual min=-0.008148 max=0.005756 Jy/beam ! Clean residual mean=0.000026 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.482619 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.482619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077091Jy sigma=0.000651 ! Fit after self-cal, rms=0.077089Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077089Jy sigma=0.000651 ! Fit after self-cal, rms=0.077025Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.456 mas, bmaj=16.93 mas, bpa=-20.73 degrees ! Estimated noise=2729.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453416 Jy ! Component: 100 - total flux cleaned = 0.000487096 Jy ! Component: 150 - total flux cleaned = 0.000516169 Jy ! Component: 200 - total flux cleaned = 0.000542168 Jy ! Total flux subtracted in 200 components = 0.000542168 Jy ! Clean residual min=-0.008086 max=0.006792 Jy/beam ! Clean residual mean=0.000037 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.483161 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.483161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077016Jy sigma=0.000651 ! Fit after self-cal, rms=0.077011Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160899 Jy ! Component: 100 - total flux cleaned = -0.000133489 Jy ! Component: 150 - total flux cleaned = -0.00010989 Jy ! Component: 200 - total flux cleaned = -8.88129e-05 Jy ! Total flux subtracted in 200 components = -8.88129e-05 Jy ! Clean residual min=-0.007954 max=0.006733 Jy/beam ! Clean residual mean=0.000037 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.483072 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.483072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077010Jy sigma=0.000651 ! Fit after self-cal, rms=0.077007Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.782 mas, bmaj=16.73 mas, bpa=-16.02 degrees ! Estimated noise=2502.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.782 x 16.73 at -16.02 degrees (North through East) ! Clean map min=-0.0077766 max=0.43678 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.866 mas, bmaj=16.12 mas, bpa=-13.16 degrees ! Estimated noise=2879.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331933 Jy ! Component: 100 - total flux cleaned = 0.413178 Jy ! Component: 150 - total flux cleaned = 0.448823 Jy ! Component: 200 - total flux cleaned = 0.465507 Jy ! Total flux subtracted in 200 components = 0.465507 Jy ! Clean residual min=-0.010484 max=0.008455 Jy/beam ! Clean residual mean=0.000040 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.465507 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.465507 Jy ! Inverting map and beam ! Estimated beam: bmin=5.782 mas, bmaj=16.73 mas, bpa=-16.02 degrees ! Estimated noise=2502.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0095304 Jy ! Component: 100 - total flux cleaned = 0.0133995 Jy ! Component: 150 - total flux cleaned = 0.0149894 Jy ! Component: 200 - total flux cleaned = 0.0161085 Jy ! Total flux subtracted in 200 components = 0.0161085 Jy ! Clean residual min=-0.008536 max=0.005553 Jy/beam ! Clean residual mean=0.000028 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.481615 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 58 components and 0.481615 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.456 mas, bmaj=16.93 mas, bpa=-20.73 degrees ! Estimated noise=2729.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00089846 Jy ! Component: 100 - total flux cleaned = 0.00118756 Jy ! Component: 150 - total flux cleaned = 0.00131609 Jy ! Component: 200 - total flux cleaned = 0.00142931 Jy ! Total flux subtracted in 200 components = 0.00142931 Jy ! Clean residual min=-0.008059 max=0.006786 Jy/beam ! Clean residual mean=0.000037 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.483045 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102927 Jy ! Component: 100 - total flux cleaned = 0.000166442 Jy ! Component: 150 - total flux cleaned = 0.000254433 Jy ! Component: 200 - total flux cleaned = 0.000307509 Jy ! Total flux subtracted in 200 components = 0.000307509 Jy ! Clean residual min=-0.007891 max=0.006736 Jy/beam ! Clean residual mean=0.000036 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.483352 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.483352 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.782 mas, bmaj=16.73 mas, bpa=-16.02 degrees ! Estimated noise=2502.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411085 Jy ! Component: 100 - total flux cleaned = 0.000468025 Jy ! Component: 150 - total flux cleaned = 0.0006221 Jy ! Component: 200 - total flux cleaned = 0.000805183 Jy ! Total flux subtracted in 200 components = 0.000805183 Jy ! Clean residual min=-0.007953 max=0.005336 Jy/beam ! Clean residual mean=0.000025 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.484157 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.484157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077040Jy sigma=0.000651 ! Fit after self-cal, rms=0.077035Jy sigma=0.000651 wmodel J0217+0144_S_2017_07_09_pus_map.mod ! Writing 90 model components to file: J0217+0144_S_2017_07_09_pus_map.mod wobs J0217+0144_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0217+0144_S_2017_07_09_pus_uvs.fits wwins J0217+0144_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J0217+0144_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0031837 Jy ! Component: 100 - total flux cleaned = -0.00375105 Jy ! Component: 150 - total flux cleaned = -0.00352303 Jy ! Component: 200 - total flux cleaned = -0.00293403 Jy ! Component: 250 - total flux cleaned = -0.00224543 Jy ! Component: 300 - total flux cleaned = -0.00146706 Jy ! Component: 350 - total flux cleaned = -0.000916734 Jy ! Component: 400 - total flux cleaned = -0.000511133 Jy ! Component: 450 - total flux cleaned = -6.97966e-05 Jy ! Component: 500 - total flux cleaned = 0.000296912 Jy ! Component: 550 - total flux cleaned = 0.00049798 Jy ! Component: 600 - total flux cleaned = 0.000737733 Jy ! Component: 650 - total flux cleaned = 0.00101133 Jy ! Component: 700 - total flux cleaned = 0.0013615 Jy ! Component: 750 - total flux cleaned = 0.00157194 Jy ! Component: 800 - total flux cleaned = 0.0017754 Jy ! Component: 850 - total flux cleaned = 0.00197241 Jy ! Component: 900 - total flux cleaned = 0.00219912 Jy ! Component: 950 - total flux cleaned = 0.00234524 Jy ! Component: 1000 - total flux cleaned = 0.00255826 Jy ! Component: 1050 - total flux cleaned = 0.00279913 Jy ! Component: 1100 - total flux cleaned = 0.00293246 Jy ! Component: 1150 - total flux cleaned = 0.00296546 Jy ! Component: 1200 - total flux cleaned = 0.0031562 Jy ! Component: 1250 - total flux cleaned = 0.00321803 Jy ! Component: 1300 - total flux cleaned = 0.00330844 Jy ! Component: 1350 - total flux cleaned = 0.0032493 Jy ! Component: 1400 - total flux cleaned = 0.00327834 Jy ! Component: 1450 - total flux cleaned = 0.00330649 Jy ! Component: 1500 - total flux cleaned = 0.00330643 Jy ! Component: 1550 - total flux cleaned = 0.00333365 Jy ! Component: 1600 - total flux cleaned = 0.00327908 Jy ! Component: 1650 - total flux cleaned = 0.00330538 Jy ! Component: 1700 - total flux cleaned = 0.00335777 Jy ! Component: 1750 - total flux cleaned = 0.00338335 Jy ! Component: 1800 - total flux cleaned = 0.00340882 Jy ! Component: 1850 - total flux cleaned = 0.00340868 Jy ! Component: 1900 - total flux cleaned = 0.00335854 Jy ! Component: 1950 - total flux cleaned = 0.00333363 Jy ! Component: 2000 - total flux cleaned = 0.00330907 Jy ! Component: 2050 - total flux cleaned = 0.00330896 Jy ! Component: 2100 - total flux cleaned = 0.00326038 Jy ! Component: 2150 - total flux cleaned = 0.00321246 Jy ! Component: 2200 - total flux cleaned = 0.00318863 Jy ! Component: 2250 - total flux cleaned = 0.00314115 Jy ! Component: 2300 - total flux cleaned = 0.00314117 Jy ! Component: 2350 - total flux cleaned = 0.00309441 Jy ! Component: 2400 - total flux cleaned = 0.00304789 Jy ! Component: 2450 - total flux cleaned = 0.00309421 Jy ! Component: 2500 - total flux cleaned = 0.0030481 Jy ! Component: 2550 - total flux cleaned = 0.00304813 Jy ! Component: 2600 - total flux cleaned = 0.00304812 Jy ! Component: 2650 - total flux cleaned = 0.00302512 Jy ! Component: 2700 - total flux cleaned = 0.00300221 Jy ! Component: 2750 - total flux cleaned = 0.00304787 Jy ! Component: 2800 - total flux cleaned = 0.00304791 Jy ! Component: 2850 - total flux cleaned = 0.0029798 Jy ! Component: 2900 - total flux cleaned = 0.00302504 Jy ! Component: 2950 - total flux cleaned = 0.00297974 Jy ! Component: 3000 - total flux cleaned = 0.00297977 Jy ! Component: 3050 - total flux cleaned = 0.00288964 Jy ! Component: 3100 - total flux cleaned = 0.00295726 Jy ! Component: 3150 - total flux cleaned = 0.00288956 Jy ! Component: 3200 - total flux cleaned = 0.00286713 Jy ! Component: 3250 - total flux cleaned = 0.00284463 Jy ! Component: 3300 - total flux cleaned = 0.0027995 Jy ! Component: 3350 - total flux cleaned = 0.00277704 Jy ! Component: 3400 - total flux cleaned = 0.00273187 Jy ! Component: 3450 - total flux cleaned = 0.00261835 Jy ! Component: 3500 - total flux cleaned = 0.0025275 Jy ! Component: 3550 - total flux cleaned = 0.00245913 Jy ! Component: 3600 - total flux cleaned = 0.00234488 Jy ! Component: 3650 - total flux cleaned = 0.00229909 Jy ! Component: 3700 - total flux cleaned = 0.00227619 Jy ! Component: 3750 - total flux cleaned = 0.00213762 Jy ! Component: 3800 - total flux cleaned = 0.00204507 Jy ! Component: 3850 - total flux cleaned = 0.00199847 Jy ! Component: 3900 - total flux cleaned = 0.00192857 Jy ! Component: 3950 - total flux cleaned = 0.00183474 Jy ! Component: 4000 - total flux cleaned = 0.00183468 Jy ! Component: 4050 - total flux cleaned = 0.00181116 Jy ! Total flux subtracted in 4096 components = 0.0018114 Jy ! Clean residual min=-0.001325 max=0.001382 Jy/beam ! Clean residual mean=-0.000005 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.485969 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 419 components and 0.485969 Jy ![Exited script file: muppet] wmap "J0217+0144_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.782 x 16.73 at -16.02 degrees (North through East) ! Clean map min=-0.0046895 max=0.43572 Jy/beam ! Writing clean map to FITS file: J0217+0144_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.435718 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00042873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295189 0.295189 0.590377 1.18075 2.36151 4.72302 9.44603 18.8921 37.7841 75.5683 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.435 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.782 x 16.73 at -16.02 degrees (North through East) ! Clean map min=-0.0046895 max=0.43572 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0217+0144_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:39:40 2019