! Started logfile: J0217+0144_S_2017_02_19_pus_uvs.log on Sat May 4 18:39:38 2019 obs J0217+0144_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0217+0144_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672222 visibilities/baseline/integration-bin. ! Found source: J0217+0144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0217+0144_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.763105Jy sigma=0.006118 ! Fit after self-cal, rms=0.752484Jy sigma=0.006042 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=7.031 mas, bpa=-8.484 degrees ! Estimated noise=3460.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219997 Jy ! Component: 100 - total flux cleaned = 0.269034 Jy ! Total flux subtracted in 100 components = 0.269034 Jy ! Clean residual min=-0.039375 max=0.068624 Jy/beam ! Clean residual mean=0.000008 rms=0.013529 Jy/beam ! Combined flux in latest and established models = 0.269034 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.269034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173572Jy sigma=0.001337 ! Fit after self-cal, rms=0.173569Jy sigma=0.001337 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=7.207 mas, bpa=-5.729 degrees ! Estimated noise=3081.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0147634 Jy ! Component: 100 - total flux cleaned = -0.0200368 Jy ! Component: 150 - total flux cleaned = -0.0247714 Jy ! Component: 200 - total flux cleaned = -0.0285848 Jy ! Total flux subtracted in 200 components = -0.0285848 Jy ! Clean residual min=-0.034626 max=0.080134 Jy/beam ! Clean residual mean=0.000007 rms=0.015077 Jy/beam ! Combined flux in latest and established models = 0.240449 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.240449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169239Jy sigma=0.001303 ! Fit after self-cal, rms=0.169086Jy sigma=0.001303 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.74 HN 0.87 KP 0.82 ! LA 12.46 MK 1.01 NL 0.75 OV 0.82 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.77 HN 0.93 KP 0.80 ! LA 8.42 MK 0.98 NL 0.98 OV 0.87 ! PT 1.00* SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.81 HN 0.88 KP 0.71 ! LA 8.98 MK 0.98 NL 1.16 OV 0.82 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.78 HN 0.78 KP 1.00* ! LA 6.52 MK 1.12 NL 1.00* OV 0.84 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.169086Jy sigma=0.001303 ! Fit after self-cal, rms=0.385275Jy sigma=0.000713 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=7.064 mas, bpa=-5.538 degrees ! Estimated noise=3016.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169079 Jy ! Component: 100 - total flux cleaned = 0.025328 Jy ! Component: 150 - total flux cleaned = 0.0293006 Jy ! Component: 200 - total flux cleaned = 0.0316847 Jy ! Total flux subtracted in 200 components = 0.0316847 Jy ! Clean residual min=-0.008359 max=0.010555 Jy/beam ! Clean residual mean=-0.000001 rms=0.002374 Jy/beam ! Combined flux in latest and established models = 0.272134 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.272134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384344Jy sigma=0.000676 ! Fit after self-cal, rms=0.386813Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386813Jy sigma=0.000669 ! Fit after self-cal, rms=0.403775Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=7.04 mas, bpa=-5.368 degrees ! Estimated noise=3000.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005899 Jy ! Component: 100 - total flux cleaned = 0.00795668 Jy ! Component: 150 - total flux cleaned = 0.00838326 Jy ! Component: 200 - total flux cleaned = 0.00862451 Jy ! Total flux subtracted in 200 components = 0.00862451 Jy ! Clean residual min=-0.007116 max=0.009471 Jy/beam ! Clean residual mean=-0.000002 rms=0.002083 Jy/beam ! Combined flux in latest and established models = 0.280758 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.280758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403487Jy sigma=0.000663 ! Fit after self-cal, rms=0.403498Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (77.5, -103). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434826 Jy ! Component: 100 - total flux cleaned = 0.00701193 Jy ! Component: 150 - total flux cleaned = 0.0101077 Jy ! Component: 200 - total flux cleaned = 0.0130489 Jy ! Total flux subtracted in 200 components = 0.0130489 Jy ! Clean residual min=-0.006634 max=0.007809 Jy/beam ! Clean residual mean=-0.000004 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.293807 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.293807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.402729Jy sigma=0.000655 ! Fit after self-cal, rms=0.402784Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.402784Jy sigma=0.000654 ! Fit after self-cal, rms=0.404596Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=7.015 mas, bpa=-5.107 degrees ! Estimated noise=2992.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221589 Jy ! Component: 100 - total flux cleaned = 0.00493685 Jy ! Component: 150 - total flux cleaned = 0.00771474 Jy ! Component: 200 - total flux cleaned = 0.0101957 Jy ! Total flux subtracted in 200 components = 0.0101957 Jy ! Clean residual min=-0.006530 max=0.007008 Jy/beam ! Clean residual mean=-0.000005 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.304003 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 0.304003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404230Jy sigma=0.000651 ! Fit after self-cal, rms=0.404190Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239188 Jy ! Component: 100 - total flux cleaned = 0.00447007 Jy ! Component: 150 - total flux cleaned = 0.00643009 Jy ! Component: 200 - total flux cleaned = 0.00809218 Jy ! Total flux subtracted in 200 components = 0.00809218 Jy ! Clean residual min=-0.006680 max=0.006819 Jy/beam ! Clean residual mean=-0.000005 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.312095 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 0.312095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403943Jy sigma=0.000650 ! Fit after self-cal, rms=0.403943Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403943Jy sigma=0.000650 ! Fit after self-cal, rms=0.404698Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.553 mas, bmaj=10.38 mas, bpa=9.845 degrees ! Estimated noise=4082.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461442 Jy ! Component: 100 - total flux cleaned = 0.0078593 Jy ! Component: 150 - total flux cleaned = 0.0102348 Jy ! Component: 200 - total flux cleaned = 0.0124246 Jy ! Total flux subtracted in 200 components = 0.0124246 Jy ! Clean residual min=-0.008838 max=0.007793 Jy/beam ! Clean residual mean=-0.000008 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.32452 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 141 components and 0.32452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404437Jy sigma=0.000650 ! Fit after self-cal, rms=0.404373Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331706 Jy ! Component: 100 - total flux cleaned = 0.00599389 Jy ! Component: 150 - total flux cleaned = 0.00775556 Jy ! Component: 200 - total flux cleaned = 0.00912802 Jy ! Total flux subtracted in 200 components = 0.00912802 Jy ! Clean residual min=-0.009051 max=0.007847 Jy/beam ! Clean residual mean=-0.000009 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.333648 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 164 components and 0.333648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404115Jy sigma=0.000650 ! Fit after self-cal, rms=0.404092Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.003 mas, bpa=-4.989 degrees ! Estimated noise=2992.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 7.003 at -4.989 degrees (North through East) ! Clean map min=-0.012141 max=0.27628 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=6.916 mas, bpa=-7.887 degrees ! Estimated noise=3229.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204954 Jy ! Component: 100 - total flux cleaned = 0.251862 Jy ! Component: 150 - total flux cleaned = 0.272225 Jy ! Component: 200 - total flux cleaned = 0.283166 Jy ! Total flux subtracted in 200 components = 0.283166 Jy ! Clean residual min=-0.010837 max=0.012165 Jy/beam ! Clean residual mean=-0.000007 rms=0.003073 Jy/beam ! Combined flux in latest and established models = 0.283166 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.283166 Jy ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.003 mas, bpa=-4.989 degrees ! Estimated noise=2992.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108518 Jy ! Component: 100 - total flux cleaned = 0.0187544 Jy ! Component: 150 - total flux cleaned = 0.0241427 Jy ! Component: 200 - total flux cleaned = 0.0281394 Jy ! Total flux subtracted in 200 components = 0.0281394 Jy ! Clean residual min=-0.009727 max=0.008000 Jy/beam ! Clean residual mean=-0.000005 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.311306 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.311306 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.553 mas, bmaj=10.38 mas, bpa=9.845 degrees ! Estimated noise=4082.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505888 Jy ! Component: 100 - total flux cleaned = 0.00971395 Jy ! Component: 150 - total flux cleaned = 0.0131384 Jy ! Component: 200 - total flux cleaned = 0.0154858 Jy ! Total flux subtracted in 200 components = 0.0154858 Jy ! Clean residual min=-0.011282 max=0.008296 Jy/beam ! Clean residual mean=-0.000011 rms=0.002853 Jy/beam ! Combined flux in latest and established models = 0.326791 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233256 Jy ! Component: 100 - total flux cleaned = 0.00466417 Jy ! Component: 150 - total flux cleaned = 0.00634273 Jy ! Component: 200 - total flux cleaned = 0.00838811 Jy ! Total flux subtracted in 200 components = 0.00838811 Jy ! Clean residual min=-0.010559 max=0.007922 Jy/beam ! Clean residual mean=-0.000009 rms=0.002663 Jy/beam ! Combined flux in latest and established models = 0.33518 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 105 components and 0.33518 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.003 mas, bpa=-4.989 degrees ! Estimated noise=2992.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186825 Jy ! Component: 100 - total flux cleaned = 0.00417435 Jy ! Component: 150 - total flux cleaned = 0.00582556 Jy ! Component: 200 - total flux cleaned = 0.00722513 Jy ! Total flux subtracted in 200 components = 0.00722513 Jy ! Clean residual min=-0.007303 max=0.006734 Jy/beam ! Clean residual mean=-0.000005 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.342405 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 129 components and 0.342405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405077Jy sigma=0.000653 ! Fit after self-cal, rms=0.405304Jy sigma=0.000652 wmodel J0217+0144_S_2017_02_19_pus_map.mod ! Writing 129 model components to file: J0217+0144_S_2017_02_19_pus_map.mod wobs J0217+0144_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0217+0144_S_2017_02_19_pus_uvs.fits wwins J0217+0144_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J0217+0144_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188276 Jy ! Component: 100 - total flux cleaned = -0.00257872 Jy ! Component: 150 - total flux cleaned = -0.00322194 Jy ! Component: 200 - total flux cleaned = -0.00312196 Jy ! Component: 250 - total flux cleaned = -0.00341339 Jy ! Component: 300 - total flux cleaned = -0.00350661 Jy ! Component: 350 - total flux cleaned = -0.00359698 Jy ! Component: 400 - total flux cleaned = -0.00377517 Jy ! Component: 450 - total flux cleaned = -0.00394837 Jy ! Component: 500 - total flux cleaned = -0.00377872 Jy ! Component: 550 - total flux cleaned = -0.00361234 Jy ! Component: 600 - total flux cleaned = -0.00345072 Jy ! Component: 650 - total flux cleaned = -0.00329232 Jy ! Component: 700 - total flux cleaned = -0.00321245 Jy ! Component: 750 - total flux cleaned = -0.0028263 Jy ! Component: 800 - total flux cleaned = -0.00252455 Jy ! Component: 850 - total flux cleaned = -0.00230002 Jy ! Component: 900 - total flux cleaned = -0.00207893 Jy ! Component: 950 - total flux cleaned = -0.00186119 Jy ! Component: 1000 - total flux cleaned = -0.00150428 Jy ! Component: 1050 - total flux cleaned = -0.00136313 Jy ! Component: 1100 - total flux cleaned = -0.00122342 Jy ! Component: 1150 - total flux cleaned = -0.00101701 Jy ! Component: 1200 - total flux cleaned = -0.00101703 Jy ! Component: 1250 - total flux cleaned = -0.000882735 Jy ! Component: 1300 - total flux cleaned = -0.00101536 Jy ! Component: 1350 - total flux cleaned = -0.000884187 Jy ! Component: 1400 - total flux cleaned = -0.000949288 Jy ! Component: 1450 - total flux cleaned = -0.000885184 Jy ! Component: 1500 - total flux cleaned = -0.00088518 Jy ! Component: 1550 - total flux cleaned = -0.000695786 Jy ! Component: 1600 - total flux cleaned = -0.000696194 Jy ! Component: 1650 - total flux cleaned = -0.00063486 Jy ! Component: 1700 - total flux cleaned = -0.000634903 Jy ! Component: 1750 - total flux cleaned = -0.000573596 Jy ! Component: 1800 - total flux cleaned = -0.000512646 Jy ! Component: 1850 - total flux cleaned = -0.000332665 Jy ! Component: 1900 - total flux cleaned = -0.00021357 Jy ! Component: 1950 - total flux cleaned = -3.63532e-05 Jy ! Component: 2000 - total flux cleaned = -3.61274e-05 Jy ! Component: 2050 - total flux cleaned = 2.24192e-05 Jy ! Component: 2100 - total flux cleaned = -3.53493e-05 Jy ! Component: 2150 - total flux cleaned = -3.56209e-05 Jy ! Component: 2200 - total flux cleaned = -3.53718e-05 Jy ! Component: 2250 - total flux cleaned = -3.55527e-05 Jy ! Component: 2300 - total flux cleaned = -0.000262496 Jy ! Component: 2350 - total flux cleaned = -0.000318844 Jy ! Component: 2400 - total flux cleaned = -0.000375023 Jy ! Component: 2450 - total flux cleaned = -0.000542115 Jy ! Component: 2500 - total flux cleaned = -0.000541561 Jy ! Component: 2550 - total flux cleaned = -0.000486479 Jy ! Component: 2600 - total flux cleaned = -0.000541704 Jy ! Component: 2650 - total flux cleaned = -0.000487307 Jy ! Component: 2700 - total flux cleaned = -0.000487332 Jy ! Component: 2750 - total flux cleaned = -0.000432927 Jy ! Component: 2800 - total flux cleaned = -0.000487307 Jy ! Component: 2850 - total flux cleaned = -0.000487438 Jy ! Component: 2900 - total flux cleaned = -0.0005949 Jy ! Component: 2950 - total flux cleaned = -0.00075553 Jy ! Component: 3000 - total flux cleaned = -0.000701742 Jy ! Component: 3050 - total flux cleaned = -0.000808294 Jy ! Component: 3100 - total flux cleaned = -0.000967737 Jy ! Component: 3150 - total flux cleaned = -0.00102082 Jy ! Component: 3200 - total flux cleaned = -0.00112623 Jy ! Component: 3250 - total flux cleaned = -0.00123179 Jy ! Component: 3300 - total flux cleaned = -0.00133705 Jy ! Component: 3350 - total flux cleaned = -0.00149454 Jy ! Component: 3400 - total flux cleaned = -0.00165125 Jy ! Component: 3450 - total flux cleaned = -0.00175591 Jy ! Component: 3500 - total flux cleaned = -0.0019128 Jy ! Component: 3550 - total flux cleaned = -0.00217364 Jy ! Component: 3600 - total flux cleaned = -0.0022775 Jy ! Component: 3650 - total flux cleaned = -0.00243318 Jy ! Component: 3700 - total flux cleaned = -0.00264062 Jy ! Component: 3750 - total flux cleaned = -0.00284734 Jy ! Component: 3800 - total flux cleaned = -0.00305404 Jy ! Component: 3850 - total flux cleaned = -0.00326091 Jy ! Component: 3900 - total flux cleaned = -0.00341606 Jy ! Component: 3950 - total flux cleaned = -0.00362209 Jy ! Component: 4000 - total flux cleaned = -0.00377643 Jy ! Component: 4050 - total flux cleaned = -0.00403384 Jy ! Total flux subtracted in 4096 components = -0.00423924 Jy ! Clean residual min=-0.002921 max=0.003030 Jy/beam ! Clean residual mean=-0.000001 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.338166 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 389 components and 0.338165 Jy ![Exited script file: muppet] wmap "J0217+0144_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 7.003 at -4.989 degrees (North through East) ! Clean map min=-0.0084556 max=0.26005 Jy/beam ! Writing clean map to FITS file: J0217+0144_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.260047 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000892211 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02929 1.02929 2.05857 4.11715 8.2343 16.4686 32.9372 65.8744 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.26 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 7.003 at -4.989 degrees (North through East) ! Clean map min=-0.0084556 max=0.26005 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0217+0144_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:39:42 2019