! Started logfile: J0216-0118_S_2017_08_12_pus_uvs.log on Fri May 10 14:50:14 2019 obs J0216-0118_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0216-0118_S_2017_08_12_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.783188 visibilities/baseline/integration-bin. ! Found source: J0216-0118 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 16212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0216-0118_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 946 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903298Jy sigma=0.007835 ! Fit after self-cal, rms=0.888283Jy sigma=0.007733 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.638 mas, bmaj=6.877 mas, bpa=-3.562 degrees ! Estimated noise=1028.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0870967 Jy ! Component: 100 - total flux cleaned = 0.107769 Jy ! Total flux subtracted in 100 components = 0.107769 Jy ! Clean residual min=-0.006326 max=0.008602 Jy/beam ! Clean residual mean=0.000007 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.107769 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.107769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085554Jy sigma=0.000700 ! Fit after self-cal, rms=0.085527Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.415 mas, bpa=-4.156 degrees ! Estimated noise=781.512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012037 Jy ! Component: 100 - total flux cleaned = 0.0178014 Jy ! Component: 150 - total flux cleaned = 0.0209467 Jy ! Component: 200 - total flux cleaned = 0.0228404 Jy ! Total flux subtracted in 200 components = 0.0228404 Jy ! Clean residual min=-0.003688 max=0.004720 Jy/beam ! Clean residual mean=0.000004 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.130609 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 0.130609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083951Jy sigma=0.000686 ! Fit after self-cal, rms=0.083948Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 0.98 KP 1.07 ! LA 1.01 MK 1.07 NL 0.87 OV 1.01 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 0.95 ! LA 0.94 MK 1.01 NL 1.01 OV 1.06 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* HN 0.97 KP 0.98 ! LA 0.98 MK 1.02 NL 0.97 OV 0.97 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.083948Jy sigma=0.000685 ! Fit after self-cal, rms=0.085830Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.475 mas, bpa=-3.366 degrees ! Estimated noise=788.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112257 Jy ! Component: 100 - total flux cleaned = 0.000106035 Jy ! Component: 150 - total flux cleaned = 0.000174331 Jy ! Component: 200 - total flux cleaned = 0.000174715 Jy ! Total flux subtracted in 200 components = 0.000174715 Jy ! Clean residual min=-0.003189 max=0.003468 Jy/beam ! Clean residual mean=0.000000 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.130784 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.130784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085782Jy sigma=0.000682 ! Fit after self-cal, rms=0.085854Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085854Jy sigma=0.000682 ! Fit after self-cal, rms=0.087435Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.47 mas, bpa=-3.443 degrees ! Estimated noise=786.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562759 Jy ! Component: 100 - total flux cleaned = 0.000434464 Jy ! Component: 150 - total flux cleaned = 0.000433003 Jy ! Component: 200 - total flux cleaned = 0.000432364 Jy ! Total flux subtracted in 200 components = 0.000432364 Jy ! Clean residual min=-0.002033 max=0.001993 Jy/beam ! Clean residual mean=0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.131216 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.131216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087415Jy sigma=0.000675 ! Fit after self-cal, rms=0.087497Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.02482e-06 Jy ! Component: 100 - total flux cleaned = -2.59639e-05 Jy ! Component: 150 - total flux cleaned = -2.60096e-05 Jy ! Component: 200 - total flux cleaned = -2.54051e-05 Jy ! Total flux subtracted in 200 components = -2.54051e-05 Jy ! Clean residual min=-0.002006 max=0.001958 Jy/beam ! Clean residual mean=0.000002 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.131191 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.131191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087486Jy sigma=0.000674 ! Fit after self-cal, rms=0.087485Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087485Jy sigma=0.000674 ! Fit after self-cal, rms=0.087786Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=7.461 mas, bpa=-3.381 degrees ! Estimated noise=786.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352102 Jy ! Component: 100 - total flux cleaned = 0.000352697 Jy ! Component: 150 - total flux cleaned = 0.000351729 Jy ! Component: 200 - total flux cleaned = 0.000351636 Jy ! Total flux subtracted in 200 components = 0.000351636 Jy ! Clean residual min=-0.001993 max=0.001987 Jy/beam ! Clean residual mean=0.000002 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.131542 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.131542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087777Jy sigma=0.000674 ! Fit after self-cal, rms=0.087781Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.69296e-06 Jy ! Component: 100 - total flux cleaned = -1.79201e-05 Jy ! Component: 150 - total flux cleaned = -4.99341e-06 Jy ! Component: 200 - total flux cleaned = -4.9701e-06 Jy ! Total flux subtracted in 200 components = -4.9701e-06 Jy ! Clean residual min=-0.001986 max=0.001982 Jy/beam ! Clean residual mean=0.000002 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.131537 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.131538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087775Jy sigma=0.000674 ! Fit after self-cal, rms=0.087775Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087775Jy sigma=0.000674 ! Fit after self-cal, rms=0.087851Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.801 mas, bmaj=12.77 mas, bpa=-4.748 degrees ! Estimated noise=1042.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361155 Jy ! Component: 100 - total flux cleaned = 0.000356931 Jy ! Component: 150 - total flux cleaned = 0.000354786 Jy ! Component: 200 - total flux cleaned = 0.000366227 Jy ! Total flux subtracted in 200 components = 0.000366227 Jy ! Clean residual min=-0.002402 max=0.002268 Jy/beam ! Clean residual mean=0.000004 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.131904 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.131904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087851Jy sigma=0.000674 ! Fit after self-cal, rms=0.087848Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.72825e-05 Jy ! Component: 100 - total flux cleaned = -2.49679e-05 Jy ! Component: 150 - total flux cleaned = -1.12915e-05 Jy ! Component: 200 - total flux cleaned = -1.30655e-06 Jy ! Total flux subtracted in 200 components = -1.30655e-06 Jy ! Clean residual min=-0.002399 max=0.002269 Jy/beam ! Clean residual mean=0.000004 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.131902 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.131902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087849Jy sigma=0.000674 ! Fit after self-cal, rms=0.087849Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.455 mas, bpa=-3.326 degrees ! Estimated noise=786.817 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 7.455 at -3.326 degrees (North through East) ! Clean map min=-0.0019172 max=0.11492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=6.886 mas, bpa=-2.838 degrees ! Estimated noise=1037.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.087654 Jy ! Component: 100 - total flux cleaned = 0.109804 Jy ! Component: 150 - total flux cleaned = 0.119461 Jy ! Component: 200 - total flux cleaned = 0.124335 Jy ! Total flux subtracted in 200 components = 0.124335 Jy ! Clean residual min=-0.003108 max=0.003436 Jy/beam ! Clean residual mean=0.000005 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.124335 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.124335 Jy ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.455 mas, bpa=-3.326 degrees ! Estimated noise=786.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390358 Jy ! Component: 100 - total flux cleaned = 0.006019 Jy ! Component: 150 - total flux cleaned = 0.00710868 Jy ! Component: 200 - total flux cleaned = 0.00755645 Jy ! Total flux subtracted in 200 components = 0.00755645 Jy ! Clean residual min=-0.002067 max=0.001898 Jy/beam ! Clean residual mean=0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.131892 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.131892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.801 mas, bmaj=12.77 mas, bpa=-4.748 degrees ! Estimated noise=1042.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000754301 Jy ! Component: 100 - total flux cleaned = 0.000836282 Jy ! Component: 150 - total flux cleaned = 0.000898926 Jy ! Component: 200 - total flux cleaned = 0.000897505 Jy ! Total flux subtracted in 200 components = 0.000897505 Jy ! Clean residual min=-0.002489 max=0.002238 Jy/beam ! Clean residual mean=0.000004 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.132789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.07863e-09 Jy ! Component: 100 - total flux cleaned = 1.36266e-05 Jy ! Component: 150 - total flux cleaned = 1.37627e-05 Jy ! Component: 200 - total flux cleaned = 2.44223e-05 Jy ! Total flux subtracted in 200 components = 2.44223e-05 Jy ! Clean residual min=-0.002504 max=0.002257 Jy/beam ! Clean residual mean=0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.132813 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.132813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.455 mas, bpa=-3.326 degrees ! Estimated noise=786.817 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.26631e-05 Jy ! Component: 100 - total flux cleaned = 4.18166e-05 Jy ! Component: 150 - total flux cleaned = 7.57211e-06 Jy ! Component: 200 - total flux cleaned = 7.96507e-06 Jy ! Total flux subtracted in 200 components = 7.96507e-06 Jy ! Clean residual min=-0.001978 max=0.001929 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.132821 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.132821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087825Jy sigma=0.000674 ! Fit after self-cal, rms=0.087821Jy sigma=0.000674 wmodel J0216-0118_S_2017_08_12_pus_map.mod ! Writing 89 model components to file: J0216-0118_S_2017_08_12_pus_map.mod wobs J0216-0118_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0216-0118_S_2017_08_12_pus_uvs.fits wwins J0216-0118_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0216-0118_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155779 Jy ! Component: 100 - total flux cleaned = -8.82389e-05 Jy ! Component: 150 - total flux cleaned = -2.46031e-05 Jy ! Component: 200 - total flux cleaned = 3.65964e-05 Jy ! Component: 250 - total flux cleaned = 0.000150738 Jy ! Component: 300 - total flux cleaned = 0.00020426 Jy ! Component: 350 - total flux cleaned = 0.000229901 Jy ! Component: 400 - total flux cleaned = 0.000280012 Jy ! Component: 450 - total flux cleaned = 0.000303826 Jy ! Component: 500 - total flux cleaned = 0.000374952 Jy ! Component: 550 - total flux cleaned = 0.000489659 Jy ! Component: 600 - total flux cleaned = 0.000556499 Jy ! Component: 650 - total flux cleaned = 0.000600162 Jy ! Component: 700 - total flux cleaned = 0.000663951 Jy ! Component: 750 - total flux cleaned = 0.000684733 Jy ! Component: 800 - total flux cleaned = 0.000746019 Jy ! Component: 850 - total flux cleaned = 0.000785792 Jy ! Component: 900 - total flux cleaned = 0.000824554 Jy ! Component: 950 - total flux cleaned = 0.000900856 Jy ! Component: 1000 - total flux cleaned = 0.000919646 Jy ! Component: 1050 - total flux cleaned = 0.000974689 Jy ! Component: 1100 - total flux cleaned = 0.00102847 Jy ! Component: 1150 - total flux cleaned = 0.00108152 Jy ! Component: 1200 - total flux cleaned = 0.00116832 Jy ! Component: 1250 - total flux cleaned = 0.00127059 Jy ! Component: 1300 - total flux cleaned = 0.00140463 Jy ! Component: 1350 - total flux cleaned = 0.00148716 Jy ! Component: 1400 - total flux cleaned = 0.00153575 Jy ! Component: 1450 - total flux cleaned = 0.00164818 Jy ! Component: 1500 - total flux cleaned = 0.00166423 Jy ! Component: 1550 - total flux cleaned = 0.00178895 Jy ! Component: 1600 - total flux cleaned = 0.00189622 Jy ! Component: 1650 - total flux cleaned = 0.00197212 Jy ! Component: 1700 - total flux cleaned = 0.002136 Jy ! Component: 1750 - total flux cleaned = 0.00216526 Jy ! Component: 1800 - total flux cleaned = 0.00225257 Jy ! Component: 1850 - total flux cleaned = 0.00233865 Jy ! Component: 1900 - total flux cleaned = 0.00240931 Jy ! Component: 1950 - total flux cleaned = 0.00250704 Jy ! Component: 2000 - total flux cleaned = 0.00256214 Jy ! Component: 2050 - total flux cleaned = 0.00263024 Jy ! Component: 2100 - total flux cleaned = 0.00267083 Jy ! Component: 2150 - total flux cleaned = 0.00276454 Jy ! Component: 2200 - total flux cleaned = 0.00287021 Jy ! Component: 2250 - total flux cleaned = 0.00294862 Jy ! Component: 2300 - total flux cleaned = 0.00298746 Jy ! Component: 2350 - total flux cleaned = 0.00303887 Jy ! Component: 2400 - total flux cleaned = 0.00310253 Jy ! Component: 2450 - total flux cleaned = 0.00320294 Jy ! Component: 2500 - total flux cleaned = 0.00324046 Jy ! Component: 2550 - total flux cleaned = 0.00333933 Jy ! Component: 2600 - total flux cleaned = 0.00340037 Jy ! Component: 2650 - total flux cleaned = 0.00344892 Jy ! Component: 2700 - total flux cleaned = 0.00354489 Jy ! Component: 2750 - total flux cleaned = 0.00356871 Jy ! Component: 2800 - total flux cleaned = 0.00365159 Jy ! Component: 2850 - total flux cleaned = 0.00373381 Jy ! Component: 2900 - total flux cleaned = 0.00379201 Jy ! Component: 2950 - total flux cleaned = 0.00384985 Jy ! Component: 3000 - total flux cleaned = 0.00390721 Jy ! Component: 3050 - total flux cleaned = 0.00395287 Jy ! Component: 3100 - total flux cleaned = 0.00399808 Jy ! Component: 3150 - total flux cleaned = 0.00403188 Jy ! Component: 3200 - total flux cleaned = 0.00408777 Jy ! Component: 3250 - total flux cleaned = 0.00413215 Jy ! Component: 3300 - total flux cleaned = 0.0041983 Jy ! Component: 3350 - total flux cleaned = 0.00427484 Jy ! Component: 3400 - total flux cleaned = 0.00429638 Jy ! Component: 3450 - total flux cleaned = 0.00436135 Jy ! Component: 3500 - total flux cleaned = 0.00441511 Jy ! Component: 3550 - total flux cleaned = 0.00447921 Jy ! Component: 3600 - total flux cleaned = 0.00453235 Jy ! Component: 3650 - total flux cleaned = 0.00458525 Jy ! Component: 3700 - total flux cleaned = 0.00464824 Jy ! Component: 3750 - total flux cleaned = 0.00466915 Jy ! Component: 3800 - total flux cleaned = 0.00474188 Jy ! Component: 3850 - total flux cleaned = 0.00479355 Jy ! Component: 3900 - total flux cleaned = 0.00482437 Jy ! Component: 3950 - total flux cleaned = 0.00489605 Jy ! Component: 4000 - total flux cleaned = 0.0049572 Jy ! Component: 4050 - total flux cleaned = 0.00499777 Jy ! Total flux subtracted in 4096 components = 0.00506848 Jy ! Clean residual min=-0.000606 max=0.000705 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.13789 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 378 components and 0.13789 Jy ![Exited script file: muppet] wmap "J0216-0118_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 7.455 at -3.326 degrees (North through East) ! Clean map min=-0.0019794 max=0.11497 Jy/beam ! Writing clean map to FITS file: J0216-0118_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114967 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178634 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.466139 0.466139 0.932277 1.86455 3.72911 7.45822 14.9164 29.8329 59.6657 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 7.455 at -3.326 degrees (North through East) ! Clean map min=-0.0019794 max=0.11497 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0216-0118_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:50:18 2019