! Started logfile: J0215-0343_S_2017_08_12_pus_uvs.log on Fri May 10 14:50:10 2019 obs J0215-0343_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0215-0343_S_2017_08_12_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.606481 visibilities/baseline/integration-bin. ! Found source: J0215-0343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0215-0343_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 723 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938507Jy sigma=0.008149 ! Fit after self-cal, rms=0.927732Jy sigma=0.008066 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=6.908 mas, bpa=-4.742 degrees ! Estimated noise=1386.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575849 Jy ! Component: 100 - total flux cleaned = 0.0706851 Jy ! Total flux subtracted in 100 components = 0.0706851 Jy ! Clean residual min=-0.005285 max=0.005509 Jy/beam ! Clean residual mean=0.000008 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.0706851 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0706851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081341Jy sigma=0.000665 ! Fit after self-cal, rms=0.081333Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=7.767 mas, bpa=-5.384 degrees ! Estimated noise=918.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686259 Jy ! Component: 100 - total flux cleaned = 0.0101677 Jy ! Component: 150 - total flux cleaned = 0.0118386 Jy ! Component: 200 - total flux cleaned = 0.012751 Jy ! Total flux subtracted in 200 components = 0.012751 Jy ! Clean residual min=-0.003904 max=0.005064 Jy/beam ! Clean residual mean=0.000004 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0834361 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.0834361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080782Jy sigma=0.000660 ! Fit after self-cal, rms=0.080751Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 0.98 ! LA 0.99 MK 1.12 NL 0.93 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.97 ! LA 0.97 MK 1.00 NL 1.14 OV 1.04 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 0.94 ! LA 0.97 MK 1.00 NL 1.15 OV 0.98 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 4. ! A total of 237 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.080751Jy sigma=0.000660 ! Fit after self-cal, rms=0.080082Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.783 mas, bpa=-4.148 degrees ! Estimated noise=934.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206838 Jy ! Component: 100 - total flux cleaned = 0.000170756 Jy ! Component: 150 - total flux cleaned = 0.000239075 Jy ! Component: 200 - total flux cleaned = 0.000270735 Jy ! Total flux subtracted in 200 components = 0.000270735 Jy ! Clean residual min=-0.003535 max=0.004667 Jy/beam ! Clean residual mean=0.000003 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.0837068 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 26 components and 0.0837068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080053Jy sigma=0.000658 ! Fit after self-cal, rms=0.080047Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080047Jy sigma=0.000658 ! Fit after self-cal, rms=0.079733Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.775 mas, bpa=-4.113 degrees ! Estimated noise=932.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321996 Jy ! Component: 100 - total flux cleaned = 0.000289985 Jy ! Component: 150 - total flux cleaned = 0.000347312 Jy ! Component: 200 - total flux cleaned = 0.000374542 Jy ! Total flux subtracted in 200 components = 0.000374542 Jy ! Clean residual min=-0.003348 max=0.004455 Jy/beam ! Clean residual mean=0.000005 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0840814 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 27 components and 0.0840814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079712Jy sigma=0.000657 ! Fit after self-cal, rms=0.079733Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430212 Jy ! Component: 100 - total flux cleaned = 0.00631022 Jy ! Component: 150 - total flux cleaned = 0.00699329 Jy ! Component: 200 - total flux cleaned = 0.00718446 Jy ! Total flux subtracted in 200 components = 0.00718446 Jy ! Clean residual min=-0.002731 max=0.002963 Jy/beam ! Clean residual mean=0.000001 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0912658 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 0.0912658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079508Jy sigma=0.000655 ! Fit after self-cal, rms=0.079451Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079451Jy sigma=0.000654 ! Fit after self-cal, rms=0.079344Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=7.736 mas, bpa=-4.057 degrees ! Estimated noise=933.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018565 Jy ! Component: 100 - total flux cleaned = 0.00280092 Jy ! Component: 150 - total flux cleaned = 0.00317527 Jy ! Component: 200 - total flux cleaned = 0.0032654 Jy ! Total flux subtracted in 200 components = 0.0032654 Jy ! Clean residual min=-0.002634 max=0.002804 Jy/beam ! Clean residual mean=0.000000 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0945312 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 72 components and 0.0945312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079298Jy sigma=0.000654 ! Fit after self-cal, rms=0.079274Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484498 Jy ! Component: 100 - total flux cleaned = 0.000722262 Jy ! Component: 150 - total flux cleaned = 0.000683017 Jy ! Component: 200 - total flux cleaned = 0.000646435 Jy ! Total flux subtracted in 200 components = 0.000646435 Jy ! Clean residual min=-0.002594 max=0.002817 Jy/beam ! Clean residual mean=0.000000 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0951777 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.0951777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079262Jy sigma=0.000654 ! Fit after self-cal, rms=0.079257Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079257Jy sigma=0.000654 ! Fit after self-cal, rms=0.079381Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.739 mas, bmaj=14.43 mas, bpa=-7.331 degrees ! Estimated noise=1260.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120307 Jy ! Component: 100 - total flux cleaned = 0.00127245 Jy ! Component: 150 - total flux cleaned = 0.00132984 Jy ! Component: 200 - total flux cleaned = 0.00135361 Jy ! Total flux subtracted in 200 components = 0.00135361 Jy ! Clean residual min=-0.003944 max=0.003741 Jy/beam ! Clean residual mean=-0.000000 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.0965313 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 113 components and 0.0965313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079376Jy sigma=0.000653 ! Fit after self-cal, rms=0.079366Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407296 Jy ! Component: 100 - total flux cleaned = 0.000457257 Jy ! Component: 150 - total flux cleaned = 0.00043404 Jy ! Component: 200 - total flux cleaned = 0.000388845 Jy ! Total flux subtracted in 200 components = 0.000388845 Jy ! Clean residual min=-0.003919 max=0.003640 Jy/beam ! Clean residual mean=0.000000 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.0969201 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.0969201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079366Jy sigma=0.000653 ! Fit after self-cal, rms=0.079362Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.723 mas, bpa=-4.048 degrees ! Estimated noise=935.555 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.925 x 7.723 at -4.048 degrees (North through East) ! Clean map min=-0.0026075 max=0.073898 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.879 mas, bpa=-3.231 degrees ! Estimated noise=1369.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568146 Jy ! Component: 100 - total flux cleaned = 0.0705498 Jy ! Component: 150 - total flux cleaned = 0.0777882 Jy ! Component: 200 - total flux cleaned = 0.0828175 Jy ! Total flux subtracted in 200 components = 0.0828175 Jy ! Clean residual min=-0.004316 max=0.003906 Jy/beam ! Clean residual mean=0.000005 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.0828175 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0828175 Jy ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.723 mas, bpa=-4.048 degrees ! Estimated noise=935.555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047786 Jy ! Component: 100 - total flux cleaned = 0.00777295 Jy ! Component: 150 - total flux cleaned = 0.00989357 Jy ! Component: 200 - total flux cleaned = 0.0114343 Jy ! Total flux subtracted in 200 components = 0.0114343 Jy ! Clean residual min=-0.002796 max=0.002839 Jy/beam ! Clean residual mean=0.000001 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0942519 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 52 components and 0.0942519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.739 mas, bmaj=14.43 mas, bpa=-7.331 degrees ! Estimated noise=1260.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205505 Jy ! Component: 100 - total flux cleaned = 0.00250463 Jy ! Component: 150 - total flux cleaned = 0.00257204 Jy ! Component: 200 - total flux cleaned = 0.00260321 Jy ! Total flux subtracted in 200 components = 0.00260321 Jy ! Clean residual min=-0.003977 max=0.003674 Jy/beam ! Clean residual mean=-0.000000 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0968551 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.99151e-05 Jy ! Component: 100 - total flux cleaned = 3.19297e-05 Jy ! Component: 150 - total flux cleaned = 8.8655e-06 Jy ! Component: 200 - total flux cleaned = -3.71047e-05 Jy ! Total flux subtracted in 200 components = -3.71047e-05 Jy ! Clean residual min=-0.003922 max=0.003654 Jy/beam ! Clean residual mean=0.000000 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.096818 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 90 components and 0.096818 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.723 mas, bpa=-4.048 degrees ! Estimated noise=935.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53457e-05 Jy ! Component: 100 - total flux cleaned = 1.94556e-05 Jy ! Component: 150 - total flux cleaned = -9.50578e-06 Jy ! Component: 200 - total flux cleaned = -3.34472e-05 Jy ! Total flux subtracted in 200 components = -3.34472e-05 Jy ! Clean residual min=-0.002624 max=0.002620 Jy/beam ! Clean residual mean=0.000000 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0967845 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.0967845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079366Jy sigma=0.000653 ! Fit after self-cal, rms=0.079370Jy sigma=0.000653 wmodel J0215-0343_S_2017_08_12_pus_map.mod ! Writing 108 model components to file: J0215-0343_S_2017_08_12_pus_map.mod wobs J0215-0343_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0215-0343_S_2017_08_12_pus_uvs.fits wwins J0215-0343_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0215-0343_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.69077e-06 Jy ! Component: 100 - total flux cleaned = 0.000353301 Jy ! Component: 150 - total flux cleaned = 0.000721215 Jy ! Component: 200 - total flux cleaned = 0.00106832 Jy ! Component: 250 - total flux cleaned = 0.00132432 Jy ! Component: 300 - total flux cleaned = 0.00146517 Jy ! Component: 350 - total flux cleaned = 0.00166739 Jy ! Component: 400 - total flux cleaned = 0.00166739 Jy ! Component: 450 - total flux cleaned = 0.0017308 Jy ! Component: 500 - total flux cleaned = 0.00173086 Jy ! Component: 550 - total flux cleaned = 0.00170154 Jy ! Component: 600 - total flux cleaned = 0.00164469 Jy ! Component: 650 - total flux cleaned = 0.0016174 Jy ! Component: 700 - total flux cleaned = 0.00156299 Jy ! Component: 750 - total flux cleaned = 0.00145706 Jy ! Component: 800 - total flux cleaned = 0.00127742 Jy ! Component: 850 - total flux cleaned = 0.00120237 Jy ! Component: 900 - total flux cleaned = 0.00110375 Jy ! Component: 950 - total flux cleaned = 0.000960504 Jy ! Component: 1000 - total flux cleaned = 0.0009134 Jy ! Component: 1050 - total flux cleaned = 0.000844482 Jy ! Component: 1100 - total flux cleaned = 0.000754801 Jy ! Component: 1150 - total flux cleaned = 0.000580115 Jy ! Component: 1200 - total flux cleaned = 0.00053774 Jy ! Component: 1250 - total flux cleaned = 0.000474913 Jy ! Component: 1300 - total flux cleaned = 0.000351223 Jy ! Component: 1350 - total flux cleaned = 0.000270139 Jy ! Component: 1400 - total flux cleaned = 0.000151649 Jy ! Component: 1450 - total flux cleaned = 9.35904e-05 Jy ! Component: 1500 - total flux cleaned = -5.90347e-05 Jy ! Component: 1550 - total flux cleaned = -0.000171349 Jy ! Component: 1600 - total flux cleaned = -0.000300023 Jy ! Component: 1650 - total flux cleaned = -0.000390621 Jy ! Component: 1700 - total flux cleaned = -0.000515366 Jy ! Component: 1750 - total flux cleaned = -0.000672477 Jy ! Component: 1800 - total flux cleaned = -0.000706687 Jy ! Component: 1850 - total flux cleaned = -0.000841731 Jy ! Component: 1900 - total flux cleaned = -0.000924861 Jy ! Component: 1950 - total flux cleaned = -0.00107205 Jy ! Component: 2000 - total flux cleaned = -0.00115255 Jy ! Component: 2050 - total flux cleaned = -0.00120039 Jy ! Component: 2100 - total flux cleaned = -0.00131028 Jy ! Component: 2150 - total flux cleaned = -0.00143401 Jy ! Component: 2200 - total flux cleaned = -0.00146456 Jy ! Component: 2250 - total flux cleaned = -0.00156985 Jy ! Component: 2300 - total flux cleaned = -0.00167351 Jy ! Component: 2350 - total flux cleaned = -0.00168822 Jy ! Component: 2400 - total flux cleaned = -0.00171741 Jy ! Component: 2450 - total flux cleaned = -0.00181702 Jy ! Component: 2500 - total flux cleaned = -0.00183113 Jy ! Component: 2550 - total flux cleaned = -0.00191461 Jy ! Component: 2600 - total flux cleaned = -0.0019697 Jy ! Component: 2650 - total flux cleaned = -0.00201054 Jy ! Component: 2700 - total flux cleaned = -0.00207784 Jy ! Component: 2750 - total flux cleaned = -0.00211789 Jy ! Component: 2800 - total flux cleaned = -0.00215741 Jy ! Component: 2850 - total flux cleaned = -0.0021965 Jy ! Component: 2900 - total flux cleaned = -0.0022353 Jy ! Component: 2950 - total flux cleaned = -0.00226098 Jy ! Component: 3000 - total flux cleaned = -0.00231183 Jy ! Component: 3050 - total flux cleaned = -0.00237474 Jy ! Component: 3100 - total flux cleaned = -0.0024247 Jy ! Component: 3150 - total flux cleaned = -0.00247415 Jy ! Component: 3200 - total flux cleaned = -0.00253568 Jy ! Component: 3250 - total flux cleaned = -0.00259675 Jy ! Component: 3300 - total flux cleaned = -0.00266918 Jy ! Component: 3350 - total flux cleaned = -0.00270506 Jy ! Component: 3400 - total flux cleaned = -0.00276471 Jy ! Component: 3450 - total flux cleaned = -0.00281202 Jy ! Component: 3500 - total flux cleaned = -0.00288243 Jy ! Component: 3550 - total flux cleaned = -0.0029058 Jy ! Component: 3600 - total flux cleaned = -0.00297529 Jy ! Component: 3650 - total flux cleaned = -0.00303275 Jy ! Component: 3700 - total flux cleaned = -0.00307844 Jy ! Component: 3750 - total flux cleaned = -0.00308975 Jy ! Component: 3800 - total flux cleaned = -0.00311242 Jy ! Component: 3850 - total flux cleaned = -0.00315723 Jy ! Component: 3900 - total flux cleaned = -0.0031684 Jy ! Component: 3950 - total flux cleaned = -0.00320176 Jy ! Component: 4000 - total flux cleaned = -0.00316858 Jy ! Component: 4050 - total flux cleaned = -0.00321263 Jy ! Total flux subtracted in 4096 components = -0.00323453 Jy ! Clean residual min=-0.000584 max=0.000719 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.09355 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 421 components and 0.09355 Jy ![Exited script file: muppet] wmap "J0215-0343_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.925 x 7.723 at -4.048 degrees (North through East) ! Clean map min=-0.0014084 max=0.073475 Jy/beam ! Writing clean map to FITS file: J0215-0343_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0734747 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182131 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.743648 0.743648 1.4873 2.97459 5.94918 11.8984 23.7967 47.5935 95.1869 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.925 x 7.723 at -4.048 degrees (North through East) ! Clean map min=-0.0014084 max=0.073475 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0215-0343_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:50:14 2019