! Started logfile: J0214-2113_S_2017_10_09_pus_uvs.log on Sun May 12 13:02:30 2019 obs J0214-2113_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0214-2113_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.762452 visibilities/baseline/integration-bin. ! Found source: J0214-2113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0214-2113_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 356 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 814 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.946370Jy sigma=0.007187 ! Fit after self-cal, rms=0.932030Jy sigma=0.007082 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=13.29 mas, bpa=-20.33 degrees ! Estimated noise=1327.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550952 Jy ! Component: 100 - total flux cleaned = 0.0674968 Jy ! Total flux subtracted in 100 components = 0.0674968 Jy ! Clean residual min=-0.003885 max=0.004407 Jy/beam ! Clean residual mean=-0.000025 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.0674968 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0674968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092646Jy sigma=0.000646 ! Fit after self-cal, rms=0.092527Jy sigma=0.000645 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=15.35 mas, bpa=-19.66 degrees ! Estimated noise=901.453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631959 Jy ! Component: 100 - total flux cleaned = 0.00981456 Jy ! Component: 150 - total flux cleaned = 0.0118758 Jy ! Component: 200 - total flux cleaned = 0.0131222 Jy ! Total flux subtracted in 200 components = 0.0131222 Jy ! Clean residual min=-0.003143 max=0.002516 Jy/beam ! Clean residual mean=-0.000013 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.0806191 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 51 components and 0.0806191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092054Jy sigma=0.000641 ! Fit after self-cal, rms=0.092009Jy sigma=0.000641 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 1.00 KP 1.09 ! LA 0.99 MK 1.01 NL 0.95 OV 1.00* ! PT 1.09 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00 KP 1.00 ! LA 0.97 MK 1.07 NL 1.01 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.99 KP 0.90 ! LA 0.81 MK 1.06 NL 1.17 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 219 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.94 KP 1.00* ! LA 1.00* MK 0.95 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.092009Jy sigma=0.000641 ! Fit after self-cal, rms=0.090819Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=15.45 mas, bpa=-19.6 degrees ! Estimated noise=915.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318826 Jy ! Component: 100 - total flux cleaned = 0.000349134 Jy ! Component: 150 - total flux cleaned = 0.000300108 Jy ! Component: 200 - total flux cleaned = 0.00027726 Jy ! Total flux subtracted in 200 components = 0.00027726 Jy ! Clean residual min=-0.002413 max=0.002386 Jy/beam ! Clean residual mean=-0.000013 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0808963 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.0808964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090801Jy sigma=0.000641 ! Fit after self-cal, rms=0.090754Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090754Jy sigma=0.000641 ! Fit after self-cal, rms=0.089964Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=15.57 mas, bpa=-19.73 degrees ! Estimated noise=916.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171585 Jy ! Component: 100 - total flux cleaned = -0.000262085 Jy ! Component: 150 - total flux cleaned = -0.000323467 Jy ! Component: 200 - total flux cleaned = -0.000380072 Jy ! Total flux subtracted in 200 components = -0.000380072 Jy ! Clean residual min=-0.001789 max=0.002050 Jy/beam ! Clean residual mean=-0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0805163 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.0805163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089953Jy sigma=0.000639 ! Fit after self-cal, rms=0.089960Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4435e-05 Jy ! Component: 100 - total flux cleaned = -1.19466e-05 Jy ! Component: 150 - total flux cleaned = -4.42746e-05 Jy ! Component: 200 - total flux cleaned = -5.9298e-05 Jy ! Total flux subtracted in 200 components = -5.9298e-05 Jy ! Clean residual min=-0.001851 max=0.002055 Jy/beam ! Clean residual mean=-0.000006 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.080457 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.080457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089953Jy sigma=0.000639 ! Fit after self-cal, rms=0.089952Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089952Jy sigma=0.000639 ! Fit after self-cal, rms=0.089848Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=15.58 mas, bpa=-19.75 degrees ! Estimated noise=915.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000343035 Jy ! Component: 100 - total flux cleaned = -0.000454969 Jy ! Component: 150 - total flux cleaned = -0.000503549 Jy ! Component: 200 - total flux cleaned = -0.000532901 Jy ! Total flux subtracted in 200 components = -0.000532901 Jy ! Clean residual min=-0.001724 max=0.002078 Jy/beam ! Clean residual mean=-0.000001 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0799241 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.0799241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089840Jy sigma=0.000639 ! Fit after self-cal, rms=0.089850Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66541e-05 Jy ! Component: 100 - total flux cleaned = -6.08795e-05 Jy ! Component: 150 - total flux cleaned = -8.7198e-05 Jy ! Component: 200 - total flux cleaned = -8.71238e-05 Jy ! Total flux subtracted in 200 components = -8.71238e-05 Jy ! Clean residual min=-0.001719 max=0.002087 Jy/beam ! Clean residual mean=-0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.079837 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.079837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089845Jy sigma=0.000639 ! Fit after self-cal, rms=0.089847Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089847Jy sigma=0.000639 ! Fit after self-cal, rms=0.089724Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.862 mas, bmaj=21.34 mas, bpa=-10.08 degrees ! Estimated noise=1119.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015336 Jy ! Component: 100 - total flux cleaned = -0.000219029 Jy ! Component: 150 - total flux cleaned = -0.000253169 Jy ! Component: 200 - total flux cleaned = -0.000274343 Jy ! Total flux subtracted in 200 components = -0.000274343 Jy ! Clean residual min=-0.001906 max=0.001979 Jy/beam ! Clean residual mean=-0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0795626 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.0795626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089722Jy sigma=0.000639 ! Fit after self-cal, rms=0.089726Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.37732e-05 Jy ! Component: 100 - total flux cleaned = -5.45707e-05 Jy ! Component: 150 - total flux cleaned = -8.25084e-05 Jy ! Component: 200 - total flux cleaned = -0.000108316 Jy ! Total flux subtracted in 200 components = -0.000108316 Jy ! Clean residual min=-0.001911 max=0.001982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0794543 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 96 components and 0.0794543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089726Jy sigma=0.000639 ! Fit after self-cal, rms=0.089728Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=15.59 mas, bpa=-19.76 degrees ! Estimated noise=913.404 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 15.59 at -19.76 degrees (North through East) ! Clean map min=-0.0019549 max=0.07035 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=13.44 mas, bpa=-20.35 degrees ! Estimated noise=1350.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549592 Jy ! Component: 100 - total flux cleaned = 0.0672089 Jy ! Component: 150 - total flux cleaned = 0.0719942 Jy ! Component: 200 - total flux cleaned = 0.075088 Jy ! Total flux subtracted in 200 components = 0.075088 Jy ! Clean residual min=-0.002850 max=0.002847 Jy/beam ! Clean residual mean=-0.000008 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.075088 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.075088 Jy ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=15.59 mas, bpa=-19.76 degrees ! Estimated noise=913.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210814 Jy ! Component: 100 - total flux cleaned = 0.00276234 Jy ! Component: 150 - total flux cleaned = 0.00324433 Jy ! Component: 200 - total flux cleaned = 0.00362273 Jy ! Total flux subtracted in 200 components = 0.00362273 Jy ! Clean residual min=-0.001842 max=0.002397 Jy/beam ! Clean residual mean=-0.000003 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0787107 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 54 components and 0.0787107 Jy ! Inverting map ! Added new window around map position (9.5, 64.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138899 Jy ! Component: 100 - total flux cleaned = 0.00137519 Jy ! Component: 150 - total flux cleaned = 0.00148843 Jy ! Component: 200 - total flux cleaned = 0.00158865 Jy ! Total flux subtracted in 200 components = 0.00158865 Jy ! Clean residual min=-0.001655 max=0.002010 Jy/beam ! Clean residual mean=-0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0802994 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 0.0802994 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.862 mas, bmaj=21.34 mas, bpa=-10.08 degrees ! Estimated noise=1119.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590831 Jy ! Component: 100 - total flux cleaned = 0.00100538 Jy ! Component: 150 - total flux cleaned = 0.00126614 Jy ! Component: 200 - total flux cleaned = 0.00138136 Jy ! Total flux subtracted in 200 components = 0.00138136 Jy ! Clean residual min=-0.001846 max=0.002113 Jy/beam ! Clean residual mean=-0.000001 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0816807 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.01003e-05 Jy ! Component: 100 - total flux cleaned = 0.000118885 Jy ! Component: 150 - total flux cleaned = 0.000164197 Jy ! Component: 200 - total flux cleaned = 0.000178079 Jy ! Total flux subtracted in 200 components = 0.000178079 Jy ! Clean residual min=-0.001828 max=0.002124 Jy/beam ! Clean residual mean=-0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0818588 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 0.0818588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=15.59 mas, bpa=-19.76 degrees ! Estimated noise=913.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161979 Jy ! Component: 100 - total flux cleaned = -0.000236135 Jy ! Component: 150 - total flux cleaned = -0.000258266 Jy ! Component: 200 - total flux cleaned = -0.000317094 Jy ! Total flux subtracted in 200 components = -0.000317094 Jy ! Clean residual min=-0.001722 max=0.001909 Jy/beam ! Clean residual mean=-0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0815417 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 0.0815417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089662Jy sigma=0.000639 ! Fit after self-cal, rms=0.089633Jy sigma=0.000638 wmodel J0214-2113_S_2017_10_09_pus_map.mod ! Writing 139 model components to file: J0214-2113_S_2017_10_09_pus_map.mod wobs J0214-2113_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0214-2113_S_2017_10_09_pus_uvs.fits wwins J0214-2113_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0214-2113_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808879 Jy ! Component: 100 - total flux cleaned = 0.00107468 Jy ! Component: 150 - total flux cleaned = 0.00112962 Jy ! Component: 200 - total flux cleaned = 0.00126072 Jy ! Component: 250 - total flux cleaned = 0.0013113 Jy ! Component: 300 - total flux cleaned = 0.00138527 Jy ! Component: 350 - total flux cleaned = 0.00143294 Jy ! Component: 400 - total flux cleaned = 0.00147845 Jy ! Component: 450 - total flux cleaned = 0.00150072 Jy ! Component: 500 - total flux cleaned = 0.00158598 Jy ! Component: 550 - total flux cleaned = 0.00162668 Jy ! Component: 600 - total flux cleaned = 0.00162699 Jy ! Component: 650 - total flux cleaned = 0.00174451 Jy ! Component: 700 - total flux cleaned = 0.00176348 Jy ! Component: 750 - total flux cleaned = 0.00180112 Jy ! Component: 800 - total flux cleaned = 0.00191066 Jy ! Component: 850 - total flux cleaned = 0.00194637 Jy ! Component: 900 - total flux cleaned = 0.00206843 Jy ! Component: 950 - total flux cleaned = 0.00210238 Jy ! Component: 1000 - total flux cleaned = 0.00216931 Jy ! Component: 1050 - total flux cleaned = 0.00208726 Jy ! Component: 1100 - total flux cleaned = 0.00210348 Jy ! Component: 1150 - total flux cleaned = 0.00207232 Jy ! Component: 1200 - total flux cleaned = 0.00213433 Jy ! Component: 1250 - total flux cleaned = 0.00214907 Jy ! Component: 1300 - total flux cleaned = 0.00222391 Jy ! Component: 1350 - total flux cleaned = 0.00225321 Jy ! Component: 1400 - total flux cleaned = 0.00229633 Jy ! Component: 1450 - total flux cleaned = 0.00232494 Jy ! Component: 1500 - total flux cleaned = 0.00236693 Jy ! Component: 1550 - total flux cleaned = 0.00239452 Jy ! Component: 1600 - total flux cleaned = 0.00240829 Jy ! Component: 1650 - total flux cleaned = 0.0024889 Jy ! Component: 1700 - total flux cleaned = 0.00254174 Jy ! Component: 1750 - total flux cleaned = 0.00254178 Jy ! Component: 1800 - total flux cleaned = 0.00251618 Jy ! Component: 1850 - total flux cleaned = 0.00252906 Jy ! Component: 1900 - total flux cleaned = 0.00252914 Jy ! Component: 1950 - total flux cleaned = 0.00256626 Jy ! Component: 2000 - total flux cleaned = 0.00259049 Jy ! Component: 2050 - total flux cleaned = 0.0025663 Jy ! Component: 2100 - total flux cleaned = 0.00254243 Jy ! Component: 2150 - total flux cleaned = 0.00255413 Jy ! Component: 2200 - total flux cleaned = 0.00253084 Jy ! Component: 2250 - total flux cleaned = 0.00255391 Jy ! Component: 2300 - total flux cleaned = 0.00253105 Jy ! Component: 2350 - total flux cleaned = 0.00253113 Jy ! Component: 2400 - total flux cleaned = 0.00247499 Jy ! Component: 2450 - total flux cleaned = 0.00250834 Jy ! Component: 2500 - total flux cleaned = 0.00247532 Jy ! Component: 2550 - total flux cleaned = 0.00247532 Jy ! Component: 2600 - total flux cleaned = 0.00246461 Jy ! Component: 2650 - total flux cleaned = 0.00245399 Jy ! Component: 2700 - total flux cleaned = 0.00245408 Jy ! Component: 2750 - total flux cleaned = 0.00246457 Jy ! Component: 2800 - total flux cleaned = 0.00243331 Jy ! Component: 2850 - total flux cleaned = 0.00242299 Jy ! Component: 2900 - total flux cleaned = 0.00242292 Jy ! Component: 2950 - total flux cleaned = 0.00243313 Jy ! Component: 3000 - total flux cleaned = 0.00239267 Jy ! Component: 3050 - total flux cleaned = 0.00236262 Jy ! Component: 3100 - total flux cleaned = 0.00234277 Jy ! Component: 3150 - total flux cleaned = 0.00234266 Jy ! Component: 3200 - total flux cleaned = 0.00234253 Jy ! Component: 3250 - total flux cleaned = 0.00230349 Jy ! Component: 3300 - total flux cleaned = 0.00228414 Jy ! Component: 3350 - total flux cleaned = 0.00228413 Jy ! Component: 3400 - total flux cleaned = 0.0022842 Jy ! Component: 3450 - total flux cleaned = 0.00229367 Jy ! Component: 3500 - total flux cleaned = 0.0023126 Jy ! Component: 3550 - total flux cleaned = 0.00231258 Jy ! Component: 3600 - total flux cleaned = 0.00229384 Jy ! Component: 3650 - total flux cleaned = 0.00226583 Jy ! Component: 3700 - total flux cleaned = 0.00228444 Jy ! Component: 3750 - total flux cleaned = 0.00230297 Jy ! Component: 3800 - total flux cleaned = 0.00230293 Jy ! Component: 3850 - total flux cleaned = 0.00231206 Jy ! Component: 3900 - total flux cleaned = 0.00233039 Jy ! Component: 3950 - total flux cleaned = 0.00233038 Jy ! Component: 4000 - total flux cleaned = 0.00233039 Jy ! Component: 4050 - total flux cleaned = 0.00233039 Jy ! Total flux subtracted in 4096 components = 0.00232129 Jy ! Clean residual min=-0.000531 max=0.000546 Jy/beam ! Clean residual mean=0.000002 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.083863 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 418 components and 0.083863 Jy ![Exited script file: muppet] wmap "J0214-2113_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 15.59 at -19.76 degrees (North through East) ! Clean map min=-0.0015179 max=0.070488 Jy/beam ! Writing clean map to FITS file: J0214-2113_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0704884 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000158597 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.674991 0.674991 1.34998 2.69997 5.39993 10.7999 21.5997 43.1995 86.3989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 15.59 at -19.76 degrees (North through East) ! Clean map min=-0.0015179 max=0.070488 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0214-2113_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:36 2019