! Started logfile: J0214+5144_S_2017_06_10_pus_uvs.log on Mon May 6 14:43:00 2019 obs J0214+5144_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0214+5144_S_2017_06_10_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970175 visibilities/baseline/integration-bin. ! Found source: J0214+5144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0214+5144_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 602 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923856Jy sigma=0.009411 ! Fit after self-cal, rms=0.913258Jy sigma=0.009315 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=4.315 mas, bpa=-5.003 degrees ! Estimated noise=860.032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0656522 Jy ! Component: 100 - total flux cleaned = 0.0853174 Jy ! Total flux subtracted in 100 components = 0.0853174 Jy ! Clean residual min=-0.004073 max=0.008440 Jy/beam ! Clean residual mean=-0.000002 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.0853174 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0853174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073973Jy sigma=0.000714 ! Fit after self-cal, rms=0.073922Jy sigma=0.000713 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998177 Jy ! Component: 100 - total flux cleaned = 0.0155102 Jy ! Total flux subtracted in 100 components = 0.0155102 Jy ! Clean residual min=-0.002997 max=0.004950 Jy/beam ! Clean residual mean=0.000002 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.100828 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.100828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072250Jy sigma=0.000696 ! Fit after self-cal, rms=0.072228Jy sigma=0.000695 ! Inverting map ! Added new window around map position (5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523455 Jy ! Component: 100 - total flux cleaned = 0.00834506 Jy ! Total flux subtracted in 100 components = 0.00834506 Jy ! Clean residual min=-0.002855 max=0.004465 Jy/beam ! Clean residual mean=0.000004 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.109173 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.109173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071737Jy sigma=0.000690 ! Fit after self-cal, rms=0.071714Jy sigma=0.000690 ! Inverting map ! Added new window around map position (14.5, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438366 Jy ! Component: 100 - total flux cleaned = 0.00712575 Jy ! Total flux subtracted in 100 components = 0.00712575 Jy ! Clean residual min=-0.002611 max=0.003463 Jy/beam ! Clean residual mean=0.000004 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.116298 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.116298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071356Jy sigma=0.000686 ! Fit after self-cal, rms=0.071327Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=5.153 mas, bpa=-4.706 degrees ! Estimated noise=555.057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454367 Jy ! Component: 100 - total flux cleaned = 0.00743461 Jy ! Component: 150 - total flux cleaned = 0.00956807 Jy ! Component: 200 - total flux cleaned = 0.0111939 Jy ! Total flux subtracted in 200 components = 0.0111939 Jy ! Clean residual min=-0.002049 max=0.002630 Jy/beam ! Clean residual mean=0.000014 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.127492 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 91 components and 0.127492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070982Jy sigma=0.000682 ! Fit after self-cal, rms=0.070949Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.96 KP 1.02 ! LA 1.02 MK 1.06 NL 0.90 OV 1.00 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.04 KP 0.99 ! LA 0.97 MK 1.04 NL 1.05 OV 0.93 ! PT 0.98 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.01 KP 0.98 ! LA 0.99 MK 1.05 NL 0.99 OV 0.89 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.92 KP 1.00* ! LA 1.03 MK 0.96 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.070949Jy sigma=0.000682 ! Fit after self-cal, rms=0.070219Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=5.192 mas, bpa=-4.412 degrees ! Estimated noise=553.545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202831 Jy ! Component: 100 - total flux cleaned = 0.00350542 Jy ! Component: 150 - total flux cleaned = 0.00439377 Jy ! Component: 200 - total flux cleaned = 0.00489794 Jy ! Total flux subtracted in 200 components = 0.00489794 Jy ! Clean residual min=-0.001794 max=0.002134 Jy/beam ! Clean residual mean=0.000013 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.13239 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 122 components and 0.13239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070136Jy sigma=0.000678 ! Fit after self-cal, rms=0.070132Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070132Jy sigma=0.000678 ! Fit after self-cal, rms=0.069971Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=5.181 mas, bpa=-4.656 degrees ! Estimated noise=553.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134102 Jy ! Component: 100 - total flux cleaned = 0.00192382 Jy ! Component: 150 - total flux cleaned = 0.0021692 Jy ! Component: 200 - total flux cleaned = 0.00242595 Jy ! Total flux subtracted in 200 components = 0.00242595 Jy ! Clean residual min=-0.001572 max=0.001790 Jy/beam ! Clean residual mean=0.000014 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.134816 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 147 components and 0.134816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069936Jy sigma=0.000675 ! Fit after self-cal, rms=0.069935Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196808 Jy ! Component: 100 - total flux cleaned = 0.00313697 Jy ! Component: 150 - total flux cleaned = 0.00400292 Jy ! Component: 200 - total flux cleaned = 0.0047213 Jy ! Total flux subtracted in 200 components = 0.0047213 Jy ! Clean residual min=-0.001529 max=0.001353 Jy/beam ! Clean residual mean=0.000008 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.139537 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 177 components and 0.139537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069873Jy sigma=0.000675 ! Fit after self-cal, rms=0.069867Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069867Jy sigma=0.000675 ! Fit after self-cal, rms=0.069747Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=5.173 mas, bpa=-4.852 degrees ! Estimated noise=553.022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880975 Jy ! Component: 100 - total flux cleaned = 0.00159611 Jy ! Component: 150 - total flux cleaned = 0.00208951 Jy ! Component: 200 - total flux cleaned = 0.00239571 Jy ! Total flux subtracted in 200 components = 0.00239571 Jy ! Clean residual min=-0.001462 max=0.001293 Jy/beam ! Clean residual mean=0.000006 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.141933 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 186 components and 0.141933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069728Jy sigma=0.000674 ! Fit after self-cal, rms=0.069726Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367689 Jy ! Component: 100 - total flux cleaned = 0.000572197 Jy ! Component: 150 - total flux cleaned = 0.00074155 Jy ! Component: 200 - total flux cleaned = 0.000882288 Jy ! Total flux subtracted in 200 components = 0.000882288 Jy ! Clean residual min=-0.001450 max=0.001291 Jy/beam ! Clean residual mean=0.000005 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.142815 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 198 components and 0.142815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069716Jy sigma=0.000674 ! Fit after self-cal, rms=0.069715Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069715Jy sigma=0.000674 ! Fit after self-cal, rms=0.069771Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=8.744 mas, bpa=2.106 degrees ! Estimated noise=691.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000923869 Jy ! Component: 100 - total flux cleaned = 0.00133356 Jy ! Component: 150 - total flux cleaned = 0.00168922 Jy ! Component: 200 - total flux cleaned = 0.00190478 Jy ! Total flux subtracted in 200 components = 0.00190478 Jy ! Clean residual min=-0.001428 max=0.001499 Jy/beam ! Clean residual mean=0.000007 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.14472 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 208 components and 0.14472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069767Jy sigma=0.000674 ! Fit after self-cal, rms=0.069765Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128236 Jy ! Component: 100 - total flux cleaned = 0.000343301 Jy ! Component: 150 - total flux cleaned = 0.000427414 Jy ! Component: 200 - total flux cleaned = 0.000501722 Jy ! Total flux subtracted in 200 components = 0.000501722 Jy ! Clean residual min=-0.001437 max=0.001484 Jy/beam ! Clean residual mean=0.000006 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.145222 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 216 components and 0.145222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069765Jy sigma=0.000674 ! Fit after self-cal, rms=0.069764Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=5.172 mas, bpa=-4.986 degrees ! Estimated noise=553.548 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.776 x 5.172 at -4.986 degrees (North through East) ! Clean map min=-0.0012449 max=0.08498 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=4.336 mas, bpa=-5.471 degrees ! Estimated noise=856.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651171 Jy ! Component: 100 - total flux cleaned = 0.0853491 Jy ! Component: 150 - total flux cleaned = 0.0953397 Jy ! Component: 200 - total flux cleaned = 0.102011 Jy ! Total flux subtracted in 200 components = 0.102011 Jy ! Clean residual min=-0.002759 max=0.003909 Jy/beam ! Clean residual mean=0.000004 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.102011 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.102011 Jy ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=5.172 mas, bpa=-4.986 degrees ! Estimated noise=553.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008137 Jy ! Component: 100 - total flux cleaned = 0.0139576 Jy ! Component: 150 - total flux cleaned = 0.0183659 Jy ! Component: 200 - total flux cleaned = 0.0218048 Jy ! Total flux subtracted in 200 components = 0.0218048 Jy ! Clean residual min=-0.001764 max=0.002499 Jy/beam ! Clean residual mean=0.000015 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.123816 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 91 components and 0.123816 Jy ! Inverting map ! Added new window around map position (10, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291199 Jy ! Component: 100 - total flux cleaned = 0.00532716 Jy ! Component: 150 - total flux cleaned = 0.00741049 Jy ! Component: 200 - total flux cleaned = 0.00922112 Jy ! Total flux subtracted in 200 components = 0.00922112 Jy ! Clean residual min=-0.001602 max=0.001552 Jy/beam ! Clean residual mean=0.000011 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.133037 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 132 components and 0.133037 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=8.744 mas, bpa=2.106 degrees ! Estimated noise=691.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275641 Jy ! Component: 100 - total flux cleaned = 0.00480862 Jy ! Component: 150 - total flux cleaned = 0.00640775 Jy ! Component: 200 - total flux cleaned = 0.00767109 Jy ! Total flux subtracted in 200 components = 0.00767109 Jy ! Clean residual min=-0.001572 max=0.001545 Jy/beam ! Clean residual mean=0.000013 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.140708 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010079 Jy ! Component: 100 - total flux cleaned = 0.00182176 Jy ! Component: 150 - total flux cleaned = 0.00248735 Jy ! Component: 200 - total flux cleaned = 0.00299385 Jy ! Total flux subtracted in 200 components = 0.00299385 Jy ! Clean residual min=-0.001491 max=0.001510 Jy/beam ! Clean residual mean=0.000009 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.143702 Jy ! Adding 141 model components to the UV plane model. ! The established model now contains 253 components and 0.143702 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=5.172 mas, bpa=-4.986 degrees ! Estimated noise=553.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000723127 Jy ! Component: 100 - total flux cleaned = 0.00106935 Jy ! Component: 150 - total flux cleaned = 0.00125361 Jy ! Component: 200 - total flux cleaned = 0.00140349 Jy ! Total flux subtracted in 200 components = 0.00140349 Jy ! Clean residual min=-0.001394 max=0.001283 Jy/beam ! Clean residual mean=0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.145106 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 272 components and 0.145106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069770Jy sigma=0.000674 ! Fit after self-cal, rms=0.069759Jy sigma=0.000674 wmodel J0214+5144_S_2017_06_10_pus_map.mod ! Writing 272 model components to file: J0214+5144_S_2017_06_10_pus_map.mod wobs J0214+5144_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0214+5144_S_2017_06_10_pus_uvs.fits wwins J0214+5144_S_2017_06_10_pus_map.win ! wwins: Wrote 6 windows to J0214+5144_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021621 Jy ! Component: 100 - total flux cleaned = 0.000284856 Jy ! Component: 150 - total flux cleaned = 0.000392926 Jy ! Component: 200 - total flux cleaned = 0.000393605 Jy ! Component: 250 - total flux cleaned = 0.000493285 Jy ! Component: 300 - total flux cleaned = 0.000570743 Jy ! Component: 350 - total flux cleaned = 0.0006087 Jy ! Component: 400 - total flux cleaned = 0.000645875 Jy ! Component: 450 - total flux cleaned = 0.000627788 Jy ! Component: 500 - total flux cleaned = 0.000627471 Jy ! Component: 550 - total flux cleaned = 0.000592056 Jy ! Component: 600 - total flux cleaned = 0.00055758 Jy ! Component: 650 - total flux cleaned = 0.000557519 Jy ! Component: 700 - total flux cleaned = 0.000524214 Jy ! Component: 750 - total flux cleaned = 0.000540706 Jy ! Component: 800 - total flux cleaned = 0.00054064 Jy ! Component: 850 - total flux cleaned = 0.000588368 Jy ! Component: 900 - total flux cleaned = 0.000604023 Jy ! Component: 950 - total flux cleaned = 0.000588441 Jy ! Component: 1000 - total flux cleaned = 0.000557694 Jy ! Component: 1050 - total flux cleaned = 0.000557772 Jy ! Component: 1100 - total flux cleaned = 0.000572995 Jy ! Component: 1150 - total flux cleaned = 0.000587986 Jy ! Component: 1200 - total flux cleaned = 0.000588046 Jy ! Component: 1250 - total flux cleaned = 0.000559075 Jy ! Component: 1300 - total flux cleaned = 0.000544929 Jy ! Component: 1350 - total flux cleaned = 0.000573296 Jy ! Component: 1400 - total flux cleaned = 0.000559552 Jy ! Component: 1450 - total flux cleaned = 0.000601229 Jy ! Component: 1500 - total flux cleaned = 0.00057401 Jy ! Component: 1550 - total flux cleaned = 0.000600956 Jy ! Component: 1600 - total flux cleaned = 0.000587493 Jy ! Component: 1650 - total flux cleaned = 0.000600898 Jy ! Component: 1700 - total flux cleaned = 0.000613968 Jy ! Component: 1750 - total flux cleaned = 0.00060081 Jy ! Component: 1800 - total flux cleaned = 0.000600778 Jy ! Component: 1850 - total flux cleaned = 0.0006008 Jy ! Component: 1900 - total flux cleaned = 0.000562665 Jy ! Component: 1950 - total flux cleaned = 0.000575367 Jy ! Component: 2000 - total flux cleaned = 0.000550355 Jy ! Component: 2050 - total flux cleaned = 0.000550231 Jy ! Component: 2100 - total flux cleaned = 0.000537908 Jy ! Component: 2150 - total flux cleaned = 0.000537953 Jy ! Component: 2200 - total flux cleaned = 0.000549986 Jy ! Component: 2250 - total flux cleaned = 0.000526012 Jy ! Component: 2300 - total flux cleaned = 0.00051413 Jy ! Component: 2350 - total flux cleaned = 0.000561176 Jy ! Component: 2400 - total flux cleaned = 0.000561199 Jy ! Component: 2450 - total flux cleaned = 0.000584325 Jy ! Component: 2500 - total flux cleaned = 0.00056128 Jy ! Component: 2550 - total flux cleaned = 0.000538598 Jy ! Component: 2600 - total flux cleaned = 0.000550127 Jy ! Component: 2650 - total flux cleaned = 0.000505115 Jy ! Component: 2700 - total flux cleaned = 0.000516532 Jy ! Component: 2750 - total flux cleaned = 0.000549811 Jy ! Component: 2800 - total flux cleaned = 0.000560997 Jy ! Component: 2850 - total flux cleaned = 0.000582901 Jy ! Component: 2900 - total flux cleaned = 0.000582808 Jy ! Component: 2950 - total flux cleaned = 0.000561447 Jy ! Component: 3000 - total flux cleaned = 0.000625586 Jy ! Component: 3050 - total flux cleaned = 0.000593584 Jy ! Component: 3100 - total flux cleaned = 0.000593544 Jy ! Component: 3150 - total flux cleaned = 0.000645703 Jy ! Component: 3200 - total flux cleaned = 0.00062493 Jy ! Component: 3250 - total flux cleaned = 0.000666336 Jy ! Component: 3300 - total flux cleaned = 0.000686855 Jy ! Component: 3350 - total flux cleaned = 0.000737861 Jy ! Component: 3400 - total flux cleaned = 0.000768108 Jy ! Component: 3450 - total flux cleaned = 0.000788181 Jy ! Component: 3500 - total flux cleaned = 0.000838044 Jy ! Component: 3550 - total flux cleaned = 0.000818117 Jy ! Component: 3600 - total flux cleaned = 0.000896892 Jy ! Component: 3650 - total flux cleaned = 0.000887141 Jy ! Component: 3700 - total flux cleaned = 0.000887095 Jy ! Component: 3750 - total flux cleaned = 0.000867924 Jy ! Component: 3800 - total flux cleaned = 0.000925456 Jy ! Component: 3850 - total flux cleaned = 0.000992185 Jy ! Component: 3900 - total flux cleaned = 0.000963765 Jy ! Component: 3950 - total flux cleaned = 0.00102028 Jy ! Component: 4000 - total flux cleaned = 0.0010016 Jy ! Component: 4050 - total flux cleaned = 0.00102945 Jy ! Total flux subtracted in 4096 components = 0.00103865 Jy ! Clean residual min=-0.000666 max=0.000517 Jy/beam ! Clean residual mean=0.000003 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.146144 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 544 components and 0.146144 Jy ![Exited script file: muppet] wmap "J0214+5144_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.776 x 5.172 at -4.986 degrees (North through East) ! Clean map min=-0.0011129 max=0.085192 Jy/beam ! Writing clean map to FITS file: J0214+5144_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0851923 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165779 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.583781 0.583781 1.16756 2.33512 4.67025 9.3405 18.681 37.362 74.724 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.776 x 5.172 at -4.986 degrees (North through East) ! Clean map min=-0.0011129 max=0.085192 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0214+5144_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:43:06 2019