! Started logfile: J0213-0719_S_2017_08_12_pus_uvs.log on Fri May 10 14:50:05 2019 obs J0213-0719_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0213-0719_S_2017_08_12_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.599111 visibilities/baseline/integration-bin. ! Found source: J0213-0719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 8088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0213-0719_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 609 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958464Jy sigma=0.008041 ! Fit after self-cal, rms=0.938381Jy sigma=0.007898 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.968 mas, bpa=-4.953 degrees ! Estimated noise=1630.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0508612 Jy ! Component: 100 - total flux cleaned = 0.0619718 Jy ! Total flux subtracted in 100 components = 0.0619718 Jy ! Clean residual min=-0.004653 max=0.004418 Jy/beam ! Clean residual mean=0.000006 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.0619718 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0619718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080468Jy sigma=0.000646 ! Fit after self-cal, rms=0.080355Jy sigma=0.000645 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.695 mas, bpa=-4.951 degrees ! Estimated noise=1087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284644 Jy ! Component: 100 - total flux cleaned = 0.00413099 Jy ! Component: 150 - total flux cleaned = 0.00432819 Jy ! Component: 200 - total flux cleaned = 0.00441316 Jy ! Total flux subtracted in 200 components = 0.00441316 Jy ! Clean residual min=-0.003285 max=0.003680 Jy/beam ! Clean residual mean=0.000007 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.066385 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.066385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080248Jy sigma=0.000644 ! Fit after self-cal, rms=0.080241Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.91 KP 1.03 ! LA 0.97 MK 1.08 NL 0.95 OV 1.03 ! PT 1.09 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.92 KP 1.06 ! LA 0.99 MK 0.96 NL 1.07 OV 1.09 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.01 ! LA 0.91 MK 1.08 NL 0.99 OV 1.00 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.080241Jy sigma=0.000644 ! Fit after self-cal, rms=0.079992Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=7.694 mas, bpa=-4.281 degrees ! Estimated noise=1095.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356558 Jy ! Component: 100 - total flux cleaned = -0.00035792 Jy ! Component: 150 - total flux cleaned = -0.00030996 Jy ! Component: 200 - total flux cleaned = -0.000253556 Jy ! Total flux subtracted in 200 components = -0.000253556 Jy ! Clean residual min=-0.002768 max=0.003287 Jy/beam ! Clean residual mean=0.000005 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0661314 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.0661314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079980Jy sigma=0.000645 ! Fit after self-cal, rms=0.079987Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079987Jy sigma=0.000645 ! Fit after self-cal, rms=0.080683Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=7.708 mas, bpa=-4.204 degrees ! Estimated noise=1096.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224012 Jy ! Component: 100 - total flux cleaned = -0.000193649 Jy ! Component: 150 - total flux cleaned = -0.000140264 Jy ! Component: 200 - total flux cleaned = -0.000116599 Jy ! Total flux subtracted in 200 components = -0.000116599 Jy ! Clean residual min=-0.002904 max=0.003162 Jy/beam ! Clean residual mean=0.000004 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0660148 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.0660148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080676Jy sigma=0.000644 ! Fit after self-cal, rms=0.080724Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.76888e-05 Jy ! Component: 100 - total flux cleaned = 2.85512e-05 Jy ! Component: 150 - total flux cleaned = 4.04834e-05 Jy ! Component: 200 - total flux cleaned = 5.08865e-05 Jy ! Total flux subtracted in 200 components = 5.08865e-05 Jy ! Clean residual min=-0.002838 max=0.003043 Jy/beam ! Clean residual mean=0.000004 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0660657 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.0660657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080719Jy sigma=0.000644 ! Fit after self-cal, rms=0.080720Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080720Jy sigma=0.000644 ! Fit after self-cal, rms=0.081019Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.722 mas, bpa=-4.238 degrees ! Estimated noise=1098.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168428 Jy ! Component: 100 - total flux cleaned = -0.000157058 Jy ! Component: 150 - total flux cleaned = -0.00014618 Jy ! Component: 200 - total flux cleaned = -0.000135979 Jy ! Total flux subtracted in 200 components = -0.000135979 Jy ! Clean residual min=-0.002868 max=0.003013 Jy/beam ! Clean residual mean=0.000004 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0659297 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.0659297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081016Jy sigma=0.000644 ! Fit after self-cal, rms=0.081029Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.68415e-05 Jy ! Component: 100 - total flux cleaned = 2.66471e-05 Jy ! Component: 150 - total flux cleaned = 2.62097e-05 Jy ! Component: 200 - total flux cleaned = 3.50795e-05 Jy ! Total flux subtracted in 200 components = 3.50795e-05 Jy ! Clean residual min=-0.002835 max=0.002983 Jy/beam ! Clean residual mean=0.000004 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0659648 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.0659648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081026Jy sigma=0.000644 ! Fit after self-cal, rms=0.081027Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081027Jy sigma=0.000644 ! Fit after self-cal, rms=0.081084Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.762 mas, bmaj=14.78 mas, bpa=-6.023 degrees ! Estimated noise=1466.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425008 Jy ! Component: 100 - total flux cleaned = -0.000468288 Jy ! Component: 150 - total flux cleaned = -0.000522849 Jy ! Component: 200 - total flux cleaned = -0.000538882 Jy ! Total flux subtracted in 200 components = -0.000538882 Jy ! Clean residual min=-0.003795 max=0.004917 Jy/beam ! Clean residual mean=0.000010 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.0654259 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0654259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081088Jy sigma=0.000644 ! Fit after self-cal, rms=0.081091Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96561e-05 Jy ! Component: 100 - total flux cleaned = -8.84294e-05 Jy ! Component: 150 - total flux cleaned = -0.000104444 Jy ! Component: 200 - total flux cleaned = -0.000103679 Jy ! Total flux subtracted in 200 components = -0.000103679 Jy ! Clean residual min=-0.003802 max=0.004912 Jy/beam ! Clean residual mean=0.000010 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.0653222 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0653222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081094Jy sigma=0.000644 ! Fit after self-cal, rms=0.081095Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.731 mas, bpa=-4.262 degrees ! Estimated noise=1097.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.731 at -4.262 degrees (North through East) ! Clean map min=-0.0027142 max=0.063338 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.984 mas, bpa=-3.888 degrees ! Estimated noise=1636.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506381 Jy ! Component: 100 - total flux cleaned = 0.0616986 Jy ! Component: 150 - total flux cleaned = 0.0635862 Jy ! Component: 200 - total flux cleaned = 0.064422 Jy ! Total flux subtracted in 200 components = 0.064422 Jy ! Clean residual min=-0.003890 max=0.004048 Jy/beam ! Clean residual mean=0.000003 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.064422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.064422 Jy ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.731 mas, bpa=-4.262 degrees ! Estimated noise=1097.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000682526 Jy ! Component: 100 - total flux cleaned = 0.000955085 Jy ! Component: 150 - total flux cleaned = 0.00104823 Jy ! Component: 200 - total flux cleaned = 0.0010981 Jy ! Total flux subtracted in 200 components = 0.0010981 Jy ! Clean residual min=-0.002918 max=0.002968 Jy/beam ! Clean residual mean=0.000004 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0655201 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0655201 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.762 mas, bmaj=14.78 mas, bpa=-6.023 degrees ! Estimated noise=1466.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129327 Jy ! Component: 100 - total flux cleaned = -0.000194915 Jy ! Component: 150 - total flux cleaned = -0.000250404 Jy ! Component: 200 - total flux cleaned = -0.000298329 Jy ! Total flux subtracted in 200 components = -0.000298329 Jy ! Clean residual min=-0.003797 max=0.004917 Jy/beam ! Clean residual mean=0.000010 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.0652218 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0947e-05 Jy ! Component: 100 - total flux cleaned = -3.94554e-05 Jy ! Component: 150 - total flux cleaned = -3.92905e-05 Jy ! Component: 200 - total flux cleaned = -3.87659e-05 Jy ! Total flux subtracted in 200 components = -3.87659e-05 Jy ! Clean residual min=-0.003805 max=0.004918 Jy/beam ! Clean residual mean=0.000010 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.0651831 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.0651831 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.731 mas, bpa=-4.262 degrees ! Estimated noise=1097.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208558 Jy ! Component: 100 - total flux cleaned = 0.000292388 Jy ! Component: 150 - total flux cleaned = 0.000347176 Jy ! Component: 200 - total flux cleaned = 0.000379936 Jy ! Total flux subtracted in 200 components = 0.000379936 Jy ! Clean residual min=-0.002840 max=0.002959 Jy/beam ! Clean residual mean=0.000004 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.065563 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.065563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081097Jy sigma=0.000644 ! Fit after self-cal, rms=0.081096Jy sigma=0.000644 wmodel J0213-0719_S_2017_08_12_pus_map.mod ! Writing 36 model components to file: J0213-0719_S_2017_08_12_pus_map.mod wobs J0213-0719_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0213-0719_S_2017_08_12_pus_uvs.fits wwins J0213-0719_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0213-0719_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808292 Jy ! Component: 100 - total flux cleaned = 0.0011997 Jy ! Component: 150 - total flux cleaned = 0.00142746 Jy ! Component: 200 - total flux cleaned = 0.00142813 Jy ! Component: 250 - total flux cleaned = 0.00147137 Jy ! Component: 300 - total flux cleaned = 0.00147193 Jy ! Component: 350 - total flux cleaned = 0.00143328 Jy ! Component: 400 - total flux cleaned = 0.00146937 Jy ! Component: 450 - total flux cleaned = 0.0014339 Jy ! Component: 500 - total flux cleaned = 0.00153582 Jy ! Component: 550 - total flux cleaned = 0.00160172 Jy ! Component: 600 - total flux cleaned = 0.00166557 Jy ! Component: 650 - total flux cleaned = 0.00175905 Jy ! Component: 700 - total flux cleaned = 0.00188041 Jy ! Component: 750 - total flux cleaned = 0.00202748 Jy ! Component: 800 - total flux cleaned = 0.00211261 Jy ! Component: 850 - total flux cleaned = 0.00214034 Jy ! Component: 900 - total flux cleaned = 0.00219465 Jy ! Component: 950 - total flux cleaned = 0.00227443 Jy ! Component: 1000 - total flux cleaned = 0.00232683 Jy ! Component: 1050 - total flux cleaned = 0.00237768 Jy ! Component: 1100 - total flux cleaned = 0.00250252 Jy ! Component: 1150 - total flux cleaned = 0.00257522 Jy ! Component: 1200 - total flux cleaned = 0.0026229 Jy ! Component: 1250 - total flux cleaned = 0.00269319 Jy ! Component: 1300 - total flux cleaned = 0.00278532 Jy ! Component: 1350 - total flux cleaned = 0.00287504 Jy ! Component: 1400 - total flux cleaned = 0.00291888 Jy ! Component: 1450 - total flux cleaned = 0.00289766 Jy ! Component: 1500 - total flux cleaned = 0.00294051 Jy ! Component: 1550 - total flux cleaned = 0.00296185 Jy ! Component: 1600 - total flux cleaned = 0.00302342 Jy ! Component: 1650 - total flux cleaned = 0.00306359 Jy ! Component: 1700 - total flux cleaned = 0.00306377 Jy ! Component: 1750 - total flux cleaned = 0.00314194 Jy ! Component: 1800 - total flux cleaned = 0.00314177 Jy ! Component: 1850 - total flux cleaned = 0.00310364 Jy ! Component: 1900 - total flux cleaned = 0.00310372 Jy ! Component: 1950 - total flux cleaned = 0.00312185 Jy ! Component: 2000 - total flux cleaned = 0.00308517 Jy ! Component: 2050 - total flux cleaned = 0.00306739 Jy ! Component: 2100 - total flux cleaned = 0.00306765 Jy ! Component: 2150 - total flux cleaned = 0.00310241 Jy ! Component: 2200 - total flux cleaned = 0.00313685 Jy ! Component: 2250 - total flux cleaned = 0.00315347 Jy ! Component: 2300 - total flux cleaned = 0.00313678 Jy ! Component: 2350 - total flux cleaned = 0.0031534 Jy ! Component: 2400 - total flux cleaned = 0.00316983 Jy ! Component: 2450 - total flux cleaned = 0.00313759 Jy ! Component: 2500 - total flux cleaned = 0.00318572 Jy ! Component: 2550 - total flux cleaned = 0.00317002 Jy ! Component: 2600 - total flux cleaned = 0.00313882 Jy ! Component: 2650 - total flux cleaned = 0.00312346 Jy ! Component: 2700 - total flux cleaned = 0.00310826 Jy ! Component: 2750 - total flux cleaned = 0.00309309 Jy ! Component: 2800 - total flux cleaned = 0.00307816 Jy ! Component: 2850 - total flux cleaned = 0.00306368 Jy ! Component: 2900 - total flux cleaned = 0.00304917 Jy ! Component: 2950 - total flux cleaned = 0.00304912 Jy ! Component: 3000 - total flux cleaned = 0.00304912 Jy ! Component: 3050 - total flux cleaned = 0.00306316 Jy ! Component: 3100 - total flux cleaned = 0.00304946 Jy ! Component: 3150 - total flux cleaned = 0.0030495 Jy ! Component: 3200 - total flux cleaned = 0.00310409 Jy ! Component: 3250 - total flux cleaned = 0.00307676 Jy ! Component: 3300 - total flux cleaned = 0.00306326 Jy ! Component: 3350 - total flux cleaned = 0.00306336 Jy ! Component: 3400 - total flux cleaned = 0.00310307 Jy ! Component: 3450 - total flux cleaned = 0.00312916 Jy ! Component: 3500 - total flux cleaned = 0.00312911 Jy ! Component: 3550 - total flux cleaned = 0.0031421 Jy ! Component: 3600 - total flux cleaned = 0.00311644 Jy ! Component: 3650 - total flux cleaned = 0.00319305 Jy ! Component: 3700 - total flux cleaned = 0.0031931 Jy ! Component: 3750 - total flux cleaned = 0.00320566 Jy ! Component: 3800 - total flux cleaned = 0.0032182 Jy ! Component: 3850 - total flux cleaned = 0.00323066 Jy ! Component: 3900 - total flux cleaned = 0.00325535 Jy ! Component: 3950 - total flux cleaned = 0.00330449 Jy ! Component: 4000 - total flux cleaned = 0.00332899 Jy ! Component: 4050 - total flux cleaned = 0.00338978 Jy ! Total flux subtracted in 4096 components = 0.00342601 Jy ! Clean residual min=-0.000850 max=0.000692 Jy/beam ! Clean residual mean=0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.068989 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 339 components and 0.068989 Jy ![Exited script file: muppet] wmap "J0213-0719_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.731 at -4.262 degrees (North through East) ! Clean map min=-0.0021105 max=0.063899 Jy/beam ! Writing clean map to FITS file: J0213-0719_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0638993 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207384 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.973644 0.973644 1.94729 3.89457 7.78915 15.5783 31.1566 62.3132 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.731 at -4.262 degrees (North through East) ! Clean map min=-0.0021105 max=0.063899 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0213-0719_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:50:10 2019