! Started logfile: J0213+1213_X_2017_07_09_pus_uvs.log on Wed May 8 15:19:55 2019 obs J0213+1213_X_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0213+1213_X_2017_07_09_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976389 visibilities/baseline/integration-bin. ! Found source: J0213+1213 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 979 lines of history. ! ! Reading 75924 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0213+1213_X_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897048Jy sigma=0.007751 ! Fit after self-cal, rms=0.882943Jy sigma=0.007632 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7195 mas, bmaj=1.66 mas, bpa=-1.356 degrees ! Estimated noise=601.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.090999 Jy ! Component: 100 - total flux cleaned = 0.11549 Jy ! Total flux subtracted in 100 components = 0.11549 Jy ! Clean residual min=-0.003078 max=0.009828 Jy/beam ! Clean residual mean=-0.000009 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.11549 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.11549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080015Jy sigma=0.000666 ! Fit after self-cal, rms=0.080001Jy sigma=0.000665 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100063 Jy ! Component: 100 - total flux cleaned = 0.0141391 Jy ! Total flux subtracted in 100 components = 0.0141391 Jy ! Clean residual min=-0.002228 max=0.002100 Jy/beam ! Clean residual mean=-0.000001 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.129629 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.129629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078839Jy sigma=0.000654 ! Fit after self-cal, rms=0.078829Jy sigma=0.000654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8847 mas, bmaj=1.955 mas, bpa=-1.63 degrees ! Estimated noise=299.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236168 Jy ! Component: 100 - total flux cleaned = 0.00339687 Jy ! Component: 150 - total flux cleaned = 0.00392789 Jy ! Component: 200 - total flux cleaned = 0.00421575 Jy ! Total flux subtracted in 200 components = 0.00421575 Jy ! Clean residual min=-0.001229 max=0.001779 Jy/beam ! Clean residual mean=0.000003 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.133844 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.133844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078769Jy sigma=0.000654 ! Fit after self-cal, rms=0.078769Jy sigma=0.000654 ! Inverting map ! Added new window around map position (1.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729044 Jy ! Component: 100 - total flux cleaned = 0.000992709 Jy ! Component: 150 - total flux cleaned = 0.00113919 Jy ! Component: 200 - total flux cleaned = 0.00122768 Jy ! Total flux subtracted in 200 components = 0.00122768 Jy ! Clean residual min=-0.001077 max=0.001264 Jy/beam ! Clean residual mean=0.000004 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.135072 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.135072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078732Jy sigma=0.000653 ! Fit after self-cal, rms=0.078729Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 1.00 ! LA 0.97 MK 1.02 NL 0.97 OV 1.00 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.02 ! LA 0.97 MK 0.98 NL 0.98 OV 1.01 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.97 KP 1.00 ! LA 1.03 MK 1.00 NL 0.98 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.99 KP 1.00 ! LA 1.02 MK 1.01 NL 1.00 OV 1.01 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.93 KP 0.99 ! LA 0.99 MK 1.03 NL 0.98 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00 KP 0.99 ! LA 1.00 MK 1.01 NL 0.98 OV 0.99 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.00 ! LA 1.02 MK 1.01 NL 0.97 OV 0.99 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.97 KP 1.00 ! LA 0.97 MK 0.98 NL 0.97 OV 1.02 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.98 KP 0.97 ! LA 1.00 MK 0.99 NL 0.98 OV 1.01 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.05 KP 0.97 ! LA 1.04 MK 0.98 NL 1.01 OV 1.00 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00 KP 1.02 ! LA 0.99 MK 1.14 NL 0.98 OV 0.99 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.97 KP 0.99 ! LA 0.99 MK 1.01 NL 0.98 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.078729Jy sigma=0.000653 ! Fit after self-cal, rms=0.078631Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8865 mas, bmaj=1.955 mas, bpa=-1.659 degrees ! Estimated noise=298.842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012053 Jy ! Component: 100 - total flux cleaned = 0.00155774 Jy ! Component: 150 - total flux cleaned = 0.00173064 Jy ! Component: 200 - total flux cleaned = 0.00183696 Jy ! Total flux subtracted in 200 components = 0.00183696 Jy ! Clean residual min=-0.001016 max=0.001003 Jy/beam ! Clean residual mean=0.000003 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.136909 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.136909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078609Jy sigma=0.000652 ! Fit after self-cal, rms=0.078615Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078615Jy sigma=0.000652 ! Fit after self-cal, rms=0.078817Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8858 mas, bmaj=1.955 mas, bpa=-1.737 degrees ! Estimated noise=298.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466153 Jy ! Component: 100 - total flux cleaned = 0.000678466 Jy ! Component: 150 - total flux cleaned = 0.000866865 Jy ! Component: 200 - total flux cleaned = 0.000992882 Jy ! Total flux subtracted in 200 components = 0.000992882 Jy ! Clean residual min=-0.000706 max=0.000757 Jy/beam ! Clean residual mean=-0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.137902 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 0.137902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078811Jy sigma=0.000651 ! Fit after self-cal, rms=0.078817Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.84823e-05 Jy ! Component: 100 - total flux cleaned = 0.000151291 Jy ! Component: 150 - total flux cleaned = 0.000217517 Jy ! Component: 200 - total flux cleaned = 0.000270872 Jy ! Total flux subtracted in 200 components = 0.000270872 Jy ! Clean residual min=-0.000717 max=0.000732 Jy/beam ! Clean residual mean=-0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.138173 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 90 components and 0.138173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078815Jy sigma=0.000651 ! Fit after self-cal, rms=0.078814Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078814Jy sigma=0.000651 ! Fit after self-cal, rms=0.078805Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8857 mas, bmaj=1.955 mas, bpa=-1.761 degrees ! Estimated noise=298.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181765 Jy ! Component: 100 - total flux cleaned = 0.000300542 Jy ! Component: 150 - total flux cleaned = 0.000352993 Jy ! Component: 200 - total flux cleaned = 0.000418157 Jy ! Total flux subtracted in 200 components = 0.000418157 Jy ! Clean residual min=-0.000723 max=0.000734 Jy/beam ! Clean residual mean=-0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.138591 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.138591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078803Jy sigma=0.000651 ! Fit after self-cal, rms=0.078803Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13917e-05 Jy ! Component: 100 - total flux cleaned = 8.55788e-05 Jy ! Component: 150 - total flux cleaned = 0.000143718 Jy ! Component: 200 - total flux cleaned = 0.000191869 Jy ! Total flux subtracted in 200 components = 0.000191869 Jy ! Clean residual min=-0.000727 max=0.000726 Jy/beam ! Clean residual mean=-0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.138783 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.138783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078802Jy sigma=0.000651 ! Fit after self-cal, rms=0.078802Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078802Jy sigma=0.000651 ! Fit after self-cal, rms=0.078792Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=2.992 mas, bpa=-4.204 degrees ! Estimated noise=380.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370374 Jy ! Component: 100 - total flux cleaned = 0.000578362 Jy ! Component: 150 - total flux cleaned = 0.000681521 Jy ! Component: 200 - total flux cleaned = 0.000766572 Jy ! Total flux subtracted in 200 components = 0.000766572 Jy ! Clean residual min=-0.000873 max=0.000758 Jy/beam ! Clean residual mean=-0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.139549 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 121 components and 0.139549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078792Jy sigma=0.000651 ! Fit after self-cal, rms=0.078792Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.28761e-05 Jy ! Component: 100 - total flux cleaned = 0.00011379 Jy ! Component: 150 - total flux cleaned = 0.000149277 Jy ! Component: 200 - total flux cleaned = 0.000171939 Jy ! Total flux subtracted in 200 components = 0.000171939 Jy ! Clean residual min=-0.000874 max=0.000762 Jy/beam ! Clean residual mean=-0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.139721 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 129 components and 0.139721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078792Jy sigma=0.000651 ! Fit after self-cal, rms=0.078792Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8859 mas, bmaj=1.955 mas, bpa=-1.778 degrees ! Estimated noise=298.697 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8859 x 1.955 at -1.778 degrees (North through East) ! Clean map min=-0.0007169 max=0.11864 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7222 mas, bmaj=1.66 mas, bpa=-1.506 degrees ! Estimated noise=601.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0907976 Jy ! Component: 100 - total flux cleaned = 0.115481 Jy ! Component: 150 - total flux cleaned = 0.125279 Jy ! Component: 200 - total flux cleaned = 0.129352 Jy ! Total flux subtracted in 200 components = 0.129352 Jy ! Clean residual min=-0.001921 max=0.001896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.129352 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.129352 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8859 mas, bmaj=1.955 mas, bpa=-1.778 degrees ! Estimated noise=298.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285619 Jy ! Component: 100 - total flux cleaned = 0.00461286 Jy ! Component: 150 - total flux cleaned = 0.00591509 Jy ! Component: 200 - total flux cleaned = 0.00691671 Jy ! Total flux subtracted in 200 components = 0.00691671 Jy ! Clean residual min=-0.000714 max=0.000707 Jy/beam ! Clean residual mean=-0.000004 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.136269 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.136269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=2.992 mas, bpa=-4.204 degrees ! Estimated noise=380.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115251 Jy ! Component: 100 - total flux cleaned = 0.00188366 Jy ! Component: 150 - total flux cleaned = 0.00240575 Jy ! Component: 200 - total flux cleaned = 0.00277351 Jy ! Total flux subtracted in 200 components = 0.00277351 Jy ! Clean residual min=-0.000846 max=0.000770 Jy/beam ! Clean residual mean=-0.000004 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.139042 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179612 Jy ! Component: 100 - total flux cleaned = 0.000267688 Jy ! Component: 150 - total flux cleaned = 0.000353047 Jy ! Component: 200 - total flux cleaned = 0.000418625 Jy ! Total flux subtracted in 200 components = 0.000418625 Jy ! Clean residual min=-0.000868 max=0.000772 Jy/beam ! Clean residual mean=-0.000003 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.139461 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 74 components and 0.139461 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8859 mas, bmaj=1.955 mas, bpa=-1.778 degrees ! Estimated noise=298.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103297 Jy ! Component: 100 - total flux cleaned = -8.97763e-05 Jy ! Component: 150 - total flux cleaned = -9.00406e-05 Jy ! Component: 200 - total flux cleaned = -7.82324e-05 Jy ! Total flux subtracted in 200 components = -7.82324e-05 Jy ! Clean residual min=-0.000709 max=0.000714 Jy/beam ! Clean residual mean=-0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.139382 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 0.139382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078797Jy sigma=0.000651 ! Fit after self-cal, rms=0.078794Jy sigma=0.000651 wmodel J0213+1213_X_2017_07_09_pus_map.mod ! Writing 95 model components to file: J0213+1213_X_2017_07_09_pus_map.mod wobs J0213+1213_X_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0213+1213_X_2017_07_09_pus_uvs.fits wwins J0213+1213_X_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0213+1213_X_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.34483e-05 Jy ! Component: 100 - total flux cleaned = 8.40653e-05 Jy ! Component: 150 - total flux cleaned = 0.000162526 Jy ! Component: 200 - total flux cleaned = 0.000183804 Jy ! Component: 250 - total flux cleaned = 0.00018375 Jy ! Component: 300 - total flux cleaned = 0.000234309 Jy ! Component: 350 - total flux cleaned = 0.000263586 Jy ! Component: 400 - total flux cleaned = 0.000311707 Jy ! Component: 450 - total flux cleaned = 0.000377618 Jy ! Component: 500 - total flux cleaned = 0.000423837 Jy ! Component: 550 - total flux cleaned = 0.000469119 Jy ! Component: 600 - total flux cleaned = 0.000504522 Jy ! Component: 650 - total flux cleaned = 0.000513243 Jy ! Component: 700 - total flux cleaned = 0.000530539 Jy ! Component: 750 - total flux cleaned = 0.000547465 Jy ! Component: 800 - total flux cleaned = 0.000555832 Jy ! Component: 850 - total flux cleaned = 0.000564129 Jy ! Component: 900 - total flux cleaned = 0.000580582 Jy ! Component: 950 - total flux cleaned = 0.000580639 Jy ! Component: 1000 - total flux cleaned = 0.000588732 Jy ! Component: 1050 - total flux cleaned = 0.00059658 Jy ! Component: 1100 - total flux cleaned = 0.000588759 Jy ! Component: 1150 - total flux cleaned = 0.000588842 Jy ! Component: 1200 - total flux cleaned = 0.00061951 Jy ! Component: 1250 - total flux cleaned = 0.000619477 Jy ! Component: 1300 - total flux cleaned = 0.000626887 Jy ! Component: 1350 - total flux cleaned = 0.000634299 Jy ! Component: 1400 - total flux cleaned = 0.000634255 Jy ! Component: 1450 - total flux cleaned = 0.000648783 Jy ! Component: 1500 - total flux cleaned = 0.000634432 Jy ! Component: 1550 - total flux cleaned = 0.000648739 Jy ! Component: 1600 - total flux cleaned = 0.000676994 Jy ! Component: 1650 - total flux cleaned = 0.000662944 Jy ! Component: 1700 - total flux cleaned = 0.000676855 Jy ! Component: 1750 - total flux cleaned = 0.000683762 Jy ! Component: 1800 - total flux cleaned = 0.000711099 Jy ! Component: 1850 - total flux cleaned = 0.000724634 Jy ! Component: 1900 - total flux cleaned = 0.000744636 Jy ! Component: 1950 - total flux cleaned = 0.000764504 Jy ! Component: 2000 - total flux cleaned = 0.000751244 Jy ! Total flux subtracted in 2048 components = 0.000764293 Jy ! Clean residual min=-0.000384 max=0.000402 Jy/beam ! Clean residual mean=-0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.140147 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 252 components and 0.140147 Jy ![Exited script file: muppet] wmap "J0213+1213_X_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8859 x 1.955 at -1.778 degrees (North through East) ! Clean map min=-0.00071029 max=0.11862 Jy/beam ! Writing clean map to FITS file: J0213+1213_X_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000124801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.315643 0.315643 0.631286 1.26257 2.52515 5.05029 10.1006 20.2012 40.4023 80.8046 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8859 x 1.955 at -1.778 degrees (North through East) ! Clean map min=-0.00071029 max=0.11862 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0213+1213_X_2017_07_09_pus_uvs.log closed on Wed May 8 15:19:59 2019