! Started logfile: J0212-1746_S_2017_06_15_pus_uvs.log on Tue May 7 15:09:01 2019 obs J0212-1746_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0212-1746_S_2017_06_15_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.906713 visibilities/baseline/integration-bin. ! Found source: J0212-1746 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 15668 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0212-1746_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 539 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882312Jy sigma=0.007048 ! Fit after self-cal, rms=0.860911Jy sigma=0.006884 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.533 mas, bmaj=7.08 mas, bpa=-4.937 degrees ! Estimated noise=1486.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109144 Jy ! Component: 100 - total flux cleaned = 0.133131 Jy ! Total flux subtracted in 100 components = 0.133131 Jy ! Clean residual min=-0.006136 max=0.009433 Jy/beam ! Clean residual mean=0.000004 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.133131 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.133131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089907Jy sigma=0.000692 ! Fit after self-cal, rms=0.089898Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=8.13 mas, bpa=-4.854 degrees ! Estimated noise=826.492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108257 Jy ! Component: 100 - total flux cleaned = 0.0152749 Jy ! Component: 150 - total flux cleaned = 0.0173336 Jy ! Component: 200 - total flux cleaned = 0.0176167 Jy ! Total flux subtracted in 200 components = 0.0176167 Jy ! Clean residual min=-0.004427 max=0.006444 Jy/beam ! Clean residual mean=0.000002 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.150747 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 25 components and 0.150747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088822Jy sigma=0.000682 ! Fit after self-cal, rms=0.088824Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.12 KP 1.01 ! LA 0.98 MK 1.01 NL 0.89 OV 1.01 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.22 KP 1.00 ! LA 0.96 MK 1.00 NL 1.02 OV 1.04 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.20 KP 1.00 ! LA 0.95 MK 1.03 NL 1.01 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.12 KP 1.00* ! LA 0.94 MK 0.99 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.088824Jy sigma=0.000682 ! Fit after self-cal, rms=0.089446Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.092 mas, bpa=-4.222 degrees ! Estimated noise=823.387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146422 Jy ! Component: 100 - total flux cleaned = -0.00161362 Jy ! Component: 150 - total flux cleaned = -0.00168587 Jy ! Component: 200 - total flux cleaned = -0.00174885 Jy ! Total flux subtracted in 200 components = -0.00174885 Jy ! Clean residual min=-0.003683 max=0.005050 Jy/beam ! Clean residual mean=0.000005 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.148998 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 29 components and 0.148998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089380Jy sigma=0.000675 ! Fit after self-cal, rms=0.089465Jy sigma=0.000675 ! Inverting map ! Added new window around map position (-7, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294426 Jy ! Component: 100 - total flux cleaned = 0.0033013 Jy ! Component: 150 - total flux cleaned = 0.00330417 Jy ! Component: 200 - total flux cleaned = 0.00338621 Jy ! Total flux subtracted in 200 components = 0.00338621 Jy ! Clean residual min=-0.003331 max=0.003757 Jy/beam ! Clean residual mean=0.000008 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.152385 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 61 components and 0.152385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089134Jy sigma=0.000673 ! Fit after self-cal, rms=0.089115Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089115Jy sigma=0.000672 ! Fit after self-cal, rms=0.090763Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=8.056 mas, bpa=-4.363 degrees ! Estimated noise=822.529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011981 Jy ! Component: 100 - total flux cleaned = 0.00147112 Jy ! Component: 150 - total flux cleaned = 0.00154269 Jy ! Component: 200 - total flux cleaned = 0.00158536 Jy ! Total flux subtracted in 200 components = 0.00158536 Jy ! Clean residual min=-0.002161 max=0.002345 Jy/beam ! Clean residual mean=0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.15397 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.15397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090743Jy sigma=0.000667 ! Fit after self-cal, rms=0.090795Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-102, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153292 Jy ! Component: 100 - total flux cleaned = 0.00145566 Jy ! Component: 150 - total flux cleaned = 0.00151653 Jy ! Component: 200 - total flux cleaned = 0.00159969 Jy ! Total flux subtracted in 200 components = 0.00159969 Jy ! Clean residual min=-0.002152 max=0.002324 Jy/beam ! Clean residual mean=0.000000 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.15557 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.15557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090744Jy sigma=0.000667 ! Fit after self-cal, rms=0.090741Jy sigma=0.000667 ! Inverting map ! Added new window around map position (-21, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200149 Jy ! Component: 100 - total flux cleaned = 0.00282123 Jy ! Component: 150 - total flux cleaned = 0.003111 Jy ! Component: 200 - total flux cleaned = 0.00326829 Jy ! Total flux subtracted in 200 components = 0.00326829 Jy ! Clean residual min=-0.002039 max=0.001793 Jy/beam ! Clean residual mean=0.000003 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.158838 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 128 components and 0.158838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090692Jy sigma=0.000666 ! Fit after self-cal, rms=0.090692Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090692Jy sigma=0.000666 ! Fit after self-cal, rms=0.090663Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=8.056 mas, bpa=-4.371 degrees ! Estimated noise=821.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000764834 Jy ! Component: 100 - total flux cleaned = 0.00102791 Jy ! Component: 150 - total flux cleaned = 0.00112179 Jy ! Component: 200 - total flux cleaned = 0.00118644 Jy ! Total flux subtracted in 200 components = 0.00118644 Jy ! Clean residual min=-0.001996 max=0.001799 Jy/beam ! Clean residual mean=0.000003 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.160024 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 0.160024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090648Jy sigma=0.000666 ! Fit after self-cal, rms=0.090650Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206113 Jy ! Component: 100 - total flux cleaned = 0.000247281 Jy ! Component: 150 - total flux cleaned = 0.000305617 Jy ! Component: 200 - total flux cleaned = 0.000361181 Jy ! Total flux subtracted in 200 components = 0.000361181 Jy ! Clean residual min=-0.001977 max=0.001795 Jy/beam ! Clean residual mean=0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.160386 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 154 components and 0.160386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090641Jy sigma=0.000666 ! Fit after self-cal, rms=0.090641Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090641Jy sigma=0.000666 ! Fit after self-cal, rms=0.090702Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.655 mas, bmaj=17.24 mas, bpa=-1.357 degrees ! Estimated noise=1050.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189921 Jy ! Component: 100 - total flux cleaned = 0.000289731 Jy ! Component: 150 - total flux cleaned = 0.000349953 Jy ! Component: 200 - total flux cleaned = 0.000385523 Jy ! Total flux subtracted in 200 components = 0.000385523 Jy ! Clean residual min=-0.002136 max=0.002116 Jy/beam ! Clean residual mean=0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.160771 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 173 components and 0.160771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090697Jy sigma=0.000666 ! Fit after self-cal, rms=0.090697Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172797 Jy ! Component: 100 - total flux cleaned = 0.000172201 Jy ! Component: 150 - total flux cleaned = 0.000186408 Jy ! Component: 200 - total flux cleaned = 0.000200071 Jy ! Total flux subtracted in 200 components = 0.000200071 Jy ! Clean residual min=-0.002092 max=0.002131 Jy/beam ! Clean residual mean=0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.160971 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 183 components and 0.160971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090696Jy sigma=0.000666 ! Fit after self-cal, rms=0.090695Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.056 mas, bpa=-4.385 degrees ! Estimated noise=822.601 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.033 x 8.056 at -4.385 degrees (North through East) ! Clean map min=-0.0018085 max=0.14149 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=6.997 mas, bpa=-4.469 degrees ! Estimated noise=1501.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110062 Jy ! Component: 100 - total flux cleaned = 0.13419 Jy ! Component: 150 - total flux cleaned = 0.141366 Jy ! Component: 200 - total flux cleaned = 0.14552 Jy ! Total flux subtracted in 200 components = 0.14552 Jy ! Clean residual min=-0.003541 max=0.003519 Jy/beam ! Clean residual mean=-0.000000 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.14552 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.14552 Jy ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.056 mas, bpa=-4.385 degrees ! Estimated noise=822.601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047257 Jy ! Component: 100 - total flux cleaned = 0.00765884 Jy ! Component: 150 - total flux cleaned = 0.00988165 Jy ! Component: 200 - total flux cleaned = 0.0111214 Jy ! Total flux subtracted in 200 components = 0.0111214 Jy ! Clean residual min=-0.002114 max=0.001893 Jy/beam ! Clean residual mean=0.000000 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.156641 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 56 components and 0.156641 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.655 mas, bmaj=17.24 mas, bpa=-1.357 degrees ! Estimated noise=1050.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208034 Jy ! Component: 100 - total flux cleaned = 0.00322542 Jy ! Component: 150 - total flux cleaned = 0.00363817 Jy ! Component: 200 - total flux cleaned = 0.00392027 Jy ! Total flux subtracted in 200 components = 0.00392027 Jy ! Clean residual min=-0.002301 max=0.002287 Jy/beam ! Clean residual mean=0.000005 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.160562 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124103 Jy ! Component: 100 - total flux cleaned = 0.000181246 Jy ! Component: 150 - total flux cleaned = 0.000259493 Jy ! Component: 200 - total flux cleaned = 0.000307416 Jy ! Total flux subtracted in 200 components = 0.000307416 Jy ! Clean residual min=-0.002223 max=0.002286 Jy/beam ! Clean residual mean=0.000005 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.160869 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 107 components and 0.160869 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.056 mas, bpa=-4.385 degrees ! Estimated noise=822.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020797 Jy ! Component: 100 - total flux cleaned = -1.53995e-05 Jy ! Component: 150 - total flux cleaned = 5.39294e-05 Jy ! Component: 200 - total flux cleaned = 5.38156e-05 Jy ! Total flux subtracted in 200 components = 5.38156e-05 Jy ! Clean residual min=-0.001855 max=0.001923 Jy/beam ! Clean residual mean=0.000002 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.160923 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.160923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090732Jy sigma=0.000666 ! Fit after self-cal, rms=0.090725Jy sigma=0.000666 wmodel J0212-1746_S_2017_06_15_pus_map.mod ! Writing 129 model components to file: J0212-1746_S_2017_06_15_pus_map.mod wobs J0212-1746_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0212-1746_S_2017_06_15_pus_uvs.fits wwins J0212-1746_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J0212-1746_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.41492e-05 Jy ! Component: 100 - total flux cleaned = -0.000113273 Jy ! Component: 150 - total flux cleaned = -0.000291996 Jy ! Component: 200 - total flux cleaned = -0.000518392 Jy ! Component: 250 - total flux cleaned = -0.000708524 Jy ! Component: 300 - total flux cleaned = -0.000892497 Jy ! Component: 350 - total flux cleaned = -0.00112067 Jy ! Component: 400 - total flux cleaned = -0.0012435 Jy ! Component: 450 - total flux cleaned = -0.0013397 Jy ! Component: 500 - total flux cleaned = -0.00145676 Jy ! Component: 550 - total flux cleaned = -0.00157115 Jy ! Component: 600 - total flux cleaned = -0.00161612 Jy ! Component: 650 - total flux cleaned = -0.00168205 Jy ! Component: 700 - total flux cleaned = -0.00170388 Jy ! Component: 750 - total flux cleaned = -0.00178846 Jy ! Component: 800 - total flux cleaned = -0.00180942 Jy ! Component: 850 - total flux cleaned = -0.00185068 Jy ! Component: 900 - total flux cleaned = -0.00195087 Jy ! Component: 950 - total flux cleaned = -0.00197026 Jy ! Component: 1000 - total flux cleaned = -0.00200887 Jy ! Component: 1050 - total flux cleaned = -0.00206631 Jy ! Component: 1100 - total flux cleaned = -0.00214172 Jy ! Component: 1150 - total flux cleaned = -0.00219731 Jy ! Component: 1200 - total flux cleaned = -0.0021603 Jy ! Component: 1250 - total flux cleaned = -0.00216029 Jy ! Component: 1300 - total flux cleaned = -0.00214216 Jy ! Component: 1350 - total flux cleaned = -0.00207245 Jy ! Component: 1400 - total flux cleaned = -0.00207255 Jy ! Component: 1450 - total flux cleaned = -0.00207282 Jy ! Component: 1500 - total flux cleaned = -0.00205619 Jy ! Component: 1550 - total flux cleaned = -0.0020563 Jy ! Component: 1600 - total flux cleaned = -0.00203985 Jy ! Component: 1650 - total flux cleaned = -0.00199122 Jy ! Component: 1700 - total flux cleaned = -0.00197525 Jy ! Component: 1750 - total flux cleaned = -0.00192828 Jy ! Component: 1800 - total flux cleaned = -0.0019286 Jy ! Component: 1850 - total flux cleaned = -0.00192853 Jy ! Component: 1900 - total flux cleaned = -0.00191339 Jy ! Component: 1950 - total flux cleaned = -0.00194324 Jy ! Component: 2000 - total flux cleaned = -0.00191344 Jy ! Component: 2050 - total flux cleaned = -0.00191365 Jy ! Component: 2100 - total flux cleaned = -0.00189885 Jy ! Component: 2150 - total flux cleaned = -0.00192782 Jy ! Component: 2200 - total flux cleaned = -0.00188482 Jy ! Component: 2250 - total flux cleaned = -0.00185651 Jy ! Component: 2300 - total flux cleaned = -0.00187058 Jy ! Component: 2350 - total flux cleaned = -0.00187056 Jy ! Component: 2400 - total flux cleaned = -0.00185669 Jy ! Component: 2450 - total flux cleaned = -0.00182926 Jy ! Component: 2500 - total flux cleaned = -0.00182921 Jy ! Component: 2550 - total flux cleaned = -0.00178918 Jy ! Component: 2600 - total flux cleaned = -0.00180245 Jy ! Component: 2650 - total flux cleaned = -0.00174963 Jy ! Component: 2700 - total flux cleaned = -0.00168439 Jy ! Component: 2750 - total flux cleaned = -0.00164578 Jy ! Component: 2800 - total flux cleaned = -0.0016072 Jy ! Component: 2850 - total flux cleaned = -0.00154364 Jy ! Component: 2900 - total flux cleaned = -0.00155634 Jy ! Component: 2950 - total flux cleaned = -0.00151881 Jy ! Component: 3000 - total flux cleaned = -0.00148136 Jy ! Component: 3050 - total flux cleaned = -0.00143184 Jy ! Component: 3100 - total flux cleaned = -0.00134621 Jy ! Component: 3150 - total flux cleaned = -0.00133415 Jy ! Component: 3200 - total flux cleaned = -0.0013102 Jy ! Component: 3250 - total flux cleaned = -0.00129828 Jy ! Component: 3300 - total flux cleaned = -0.00128649 Jy ! Component: 3350 - total flux cleaned = -0.00129818 Jy ! Component: 3400 - total flux cleaned = -0.00121628 Jy ! Component: 3450 - total flux cleaned = -0.00120461 Jy ! Component: 3500 - total flux cleaned = -0.00113535 Jy ! Component: 3550 - total flux cleaned = -0.00108966 Jy ! Component: 3600 - total flux cleaned = -0.00106701 Jy ! Component: 3650 - total flux cleaned = -0.00103312 Jy ! Component: 3700 - total flux cleaned = -0.000999465 Jy ! Component: 3750 - total flux cleaned = -0.000988349 Jy ! Component: 3800 - total flux cleaned = -0.000966191 Jy ! Component: 3850 - total flux cleaned = -0.000900119 Jy ! Component: 3900 - total flux cleaned = -0.000856475 Jy ! Component: 3950 - total flux cleaned = -0.000823984 Jy ! Component: 4000 - total flux cleaned = -0.000791596 Jy ! Component: 4050 - total flux cleaned = -0.000770106 Jy ! Total flux subtracted in 4096 components = -0.000738219 Jy ! Clean residual min=-0.000645 max=0.000578 Jy/beam ! Clean residual mean=0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.160185 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 400 components and 0.160185 Jy ![Exited script file: muppet] wmap "J0212-1746_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.033 x 8.056 at -4.385 degrees (North through East) ! Clean map min=-0.0014235 max=0.14183 Jy/beam ! Writing clean map to FITS file: J0212-1746_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141832 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000187175 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.395908 0.395908 0.791817 1.58363 3.16727 6.33453 12.6691 25.3381 50.6763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.033 x 8.056 at -4.385 degrees (North through East) ! Clean map min=-0.0014235 max=0.14183 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0212-1746_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:09:06 2019