! Started logfile: J0211-1558_S_2017_06_10_pus_uvs.log on Mon May 6 14:42:55 2019 obs J0211-1558_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0211-1558_S_2017_06_10_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J0211-1558 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 10640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0211-1558_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 492 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931945Jy sigma=0.008175 ! Fit after self-cal, rms=0.922638Jy sigma=0.008096 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.431 mas, bmaj=7.085 mas, bpa=-8.179 degrees ! Estimated noise=1365.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613199 Jy ! Component: 100 - total flux cleaned = 0.0752885 Jy ! Total flux subtracted in 100 components = 0.0752885 Jy ! Clean residual min=-0.004285 max=0.006694 Jy/beam ! Clean residual mean=-0.000003 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.0752885 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0752885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079859Jy sigma=0.000678 ! Fit after self-cal, rms=0.079845Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.062 mas, bpa=-6.129 degrees ! Estimated noise=889.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710429 Jy ! Component: 100 - total flux cleaned = 0.0102743 Jy ! Component: 150 - total flux cleaned = 0.012052 Jy ! Component: 200 - total flux cleaned = 0.0128303 Jy ! Total flux subtracted in 200 components = 0.0128303 Jy ! Clean residual min=-0.002690 max=0.002608 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0881188 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.0881189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079278Jy sigma=0.000672 ! Fit after self-cal, rms=0.079272Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.96 KP 1.02 ! LA 0.96 MK 1.09 NL 0.95 OV 1.01 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00 KP 0.96 ! LA 1.00 MK 1.00 NL 1.01 OV 1.05 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.03 KP 0.94 ! LA 0.98 MK 1.00 NL 0.98 OV 0.98 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.96 KP 1.00* ! LA 1.00* MK 0.84 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.079272Jy sigma=0.000672 ! Fit after self-cal, rms=0.078687Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.042 mas, bpa=-6.067 degrees ! Estimated noise=890.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959555 Jy ! Component: 100 - total flux cleaned = 0.00105352 Jy ! Component: 150 - total flux cleaned = 0.00105179 Jy ! Component: 200 - total flux cleaned = 0.00102878 Jy ! Total flux subtracted in 200 components = 0.00102878 Jy ! Clean residual min=-0.002479 max=0.002322 Jy/beam ! Clean residual mean=0.000004 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0891476 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0891476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078666Jy sigma=0.000672 ! Fit after self-cal, rms=0.078654Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078654Jy sigma=0.000672 ! Fit after self-cal, rms=0.078441Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.054 mas, bpa=-5.883 degrees ! Estimated noise=889.903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449533 Jy ! Component: 100 - total flux cleaned = 0.000494956 Jy ! Component: 150 - total flux cleaned = 0.000514321 Jy ! Component: 200 - total flux cleaned = 0.000545318 Jy ! Total flux subtracted in 200 components = 0.000545318 Jy ! Clean residual min=-0.002518 max=0.002264 Jy/beam ! Clean residual mean=0.000004 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0896929 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 69 components and 0.089693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078431Jy sigma=0.000671 ! Fit after self-cal, rms=0.078439Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023607 Jy ! Component: 100 - total flux cleaned = 0.00025208 Jy ! Component: 150 - total flux cleaned = 0.000265921 Jy ! Component: 200 - total flux cleaned = 0.000277531 Jy ! Total flux subtracted in 200 components = 0.000277531 Jy ! Clean residual min=-0.002503 max=0.002180 Jy/beam ! Clean residual mean=0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0899705 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.0899705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078434Jy sigma=0.000671 ! Fit after self-cal, rms=0.078432Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078432Jy sigma=0.000671 ! Fit after self-cal, rms=0.078432Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=8.061 mas, bpa=-5.816 degrees ! Estimated noise=888.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.79152e-05 Jy ! Component: 100 - total flux cleaned = 3.76243e-05 Jy ! Component: 150 - total flux cleaned = 5.14923e-05 Jy ! Component: 200 - total flux cleaned = 6.34046e-05 Jy ! Total flux subtracted in 200 components = 6.34046e-05 Jy ! Clean residual min=-0.002533 max=0.002124 Jy/beam ! Clean residual mean=0.000004 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0900339 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.0900339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078427Jy sigma=0.000670 ! Fit after self-cal, rms=0.078429Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.9914e-05 Jy ! Component: 100 - total flux cleaned = 0.000112596 Jy ! Component: 150 - total flux cleaned = 0.00011262 Jy ! Component: 200 - total flux cleaned = 0.000122409 Jy ! Total flux subtracted in 200 components = 0.000122409 Jy ! Clean residual min=-0.002515 max=0.002104 Jy/beam ! Clean residual mean=0.000004 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0901563 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 92 components and 0.0901563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078426Jy sigma=0.000670 ! Fit after self-cal, rms=0.078426Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078426Jy sigma=0.000670 ! Fit after self-cal, rms=0.078409Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.237 mas, bmaj=16.8 mas, bpa=-5.072 degrees ! Estimated noise=1151.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273304 Jy ! Component: 100 - total flux cleaned = 0.000221393 Jy ! Component: 150 - total flux cleaned = 0.000154041 Jy ! Component: 200 - total flux cleaned = 0.000133056 Jy ! Total flux subtracted in 200 components = 0.000133056 Jy ! Clean residual min=-0.002904 max=0.002062 Jy/beam ! Clean residual mean=0.000009 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0902893 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.0902893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078412Jy sigma=0.000670 ! Fit after self-cal, rms=0.078411Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217315 Jy ! Component: 100 - total flux cleaned = 0.000230472 Jy ! Component: 150 - total flux cleaned = 0.000239032 Jy ! Component: 200 - total flux cleaned = 0.00023102 Jy ! Total flux subtracted in 200 components = 0.00023102 Jy ! Clean residual min=-0.002875 max=0.002043 Jy/beam ! Clean residual mean=0.000009 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0905204 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 0.0905204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078414Jy sigma=0.000670 ! Fit after self-cal, rms=0.078412Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=8.068 mas, bpa=-5.759 degrees ! Estimated noise=888.136 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.002 x 8.068 at -5.759 degrees (North through East) ! Clean map min=-0.0024126 max=0.076593 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.446 mas, bmaj=7.111 mas, bpa=-7.857 degrees ! Estimated noise=1381.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613119 Jy ! Component: 100 - total flux cleaned = 0.0754295 Jy ! Component: 150 - total flux cleaned = 0.0809747 Jy ! Component: 200 - total flux cleaned = 0.0841571 Jy ! Total flux subtracted in 200 components = 0.0841571 Jy ! Clean residual min=-0.003466 max=0.003166 Jy/beam ! Clean residual mean=0.000001 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.084157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.084157 Jy ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=8.068 mas, bpa=-5.759 degrees ! Estimated noise=888.136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265569 Jy ! Component: 100 - total flux cleaned = 0.00424593 Jy ! Component: 150 - total flux cleaned = 0.00487898 Jy ! Component: 200 - total flux cleaned = 0.00502614 Jy ! Total flux subtracted in 200 components = 0.00502614 Jy ! Clean residual min=-0.002549 max=0.002211 Jy/beam ! Clean residual mean=0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0891832 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 0.0891832 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.237 mas, bmaj=16.8 mas, bpa=-5.072 degrees ! Estimated noise=1151.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900837 Jy ! Component: 100 - total flux cleaned = 0.000904997 Jy ! Component: 150 - total flux cleaned = 0.000884349 Jy ! Component: 200 - total flux cleaned = 0.000885667 Jy ! Total flux subtracted in 200 components = 0.000885667 Jy ! Clean residual min=-0.003019 max=0.001991 Jy/beam ! Clean residual mean=0.000009 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0900688 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05333e-05 Jy ! Component: 100 - total flux cleaned = 4.45281e-05 Jy ! Component: 150 - total flux cleaned = 5.76562e-05 Jy ! Component: 200 - total flux cleaned = 6.95031e-05 Jy ! Total flux subtracted in 200 components = 6.95031e-05 Jy ! Clean residual min=-0.003001 max=0.001986 Jy/beam ! Clean residual mean=0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0901383 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.0901383 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=8.068 mas, bpa=-5.759 degrees ! Estimated noise=888.136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234679 Jy ! Component: 100 - total flux cleaned = -0.000233384 Jy ! Component: 150 - total flux cleaned = -0.00023242 Jy ! Component: 200 - total flux cleaned = -0.000251581 Jy ! Total flux subtracted in 200 components = -0.000251581 Jy ! Clean residual min=-0.002542 max=0.002169 Jy/beam ! Clean residual mean=0.000004 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0898867 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.0898868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078420Jy sigma=0.000670 ! Fit after self-cal, rms=0.078412Jy sigma=0.000670 wmodel J0211-1558_S_2017_06_10_pus_map.mod ! Writing 102 model components to file: J0211-1558_S_2017_06_10_pus_map.mod wobs J0211-1558_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0211-1558_S_2017_06_10_pus_uvs.fits wwins J0211-1558_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0211-1558_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000810493 Jy ! Component: 100 - total flux cleaned = -0.00054132 Jy ! Component: 150 - total flux cleaned = -0.000286852 Jy ! Component: 200 - total flux cleaned = -0.000114692 Jy ! Component: 250 - total flux cleaned = -4.91557e-05 Jy ! Component: 300 - total flux cleaned = 4.58978e-05 Jy ! Component: 350 - total flux cleaned = 0.000107241 Jy ! Component: 400 - total flux cleaned = 0.000194769 Jy ! Component: 450 - total flux cleaned = 0.00028166 Jy ! Component: 500 - total flux cleaned = 0.000449872 Jy ! Component: 550 - total flux cleaned = 0.000640183 Jy ! Component: 600 - total flux cleaned = 0.000745248 Jy ! Component: 650 - total flux cleaned = 0.000771454 Jy ! Component: 700 - total flux cleaned = 0.000873333 Jy ! Component: 750 - total flux cleaned = 0.000972384 Jy ! Component: 800 - total flux cleaned = 0.00109307 Jy ! Component: 850 - total flux cleaned = 0.00111693 Jy ! Component: 900 - total flux cleaned = 0.0012097 Jy ! Component: 950 - total flux cleaned = 0.00123186 Jy ! Component: 1000 - total flux cleaned = 0.00120887 Jy ! Component: 1050 - total flux cleaned = 0.00123034 Jy ! Component: 1100 - total flux cleaned = 0.00118625 Jy ! Component: 1150 - total flux cleaned = 0.00116461 Jy ! Component: 1200 - total flux cleaned = 0.00118575 Jy ! Component: 1250 - total flux cleaned = 0.00122722 Jy ! Component: 1300 - total flux cleaned = 0.00132867 Jy ! Component: 1350 - total flux cleaned = 0.001388 Jy ! Component: 1400 - total flux cleaned = 0.00148564 Jy ! Component: 1450 - total flux cleaned = 0.00144692 Jy ! Component: 1500 - total flux cleaned = 0.00150416 Jy ! Component: 1550 - total flux cleaned = 0.00150439 Jy ! Component: 1600 - total flux cleaned = 0.00157835 Jy ! Component: 1650 - total flux cleaned = 0.00163296 Jy ! Component: 1700 - total flux cleaned = 0.00159682 Jy ! Component: 1750 - total flux cleaned = 0.00157879 Jy ! Component: 1800 - total flux cleaned = 0.00161411 Jy ! Component: 1850 - total flux cleaned = 0.00163175 Jy ! Component: 1900 - total flux cleaned = 0.00158053 Jy ! Component: 1950 - total flux cleaned = 0.00163097 Jy ! Component: 2000 - total flux cleaned = 0.00158087 Jy ! Component: 2050 - total flux cleaned = 0.00153157 Jy ! Component: 2100 - total flux cleaned = 0.00154819 Jy ! Component: 2150 - total flux cleaned = 0.00154801 Jy ! Component: 2200 - total flux cleaned = 0.00154801 Jy ! Component: 2250 - total flux cleaned = 0.00154826 Jy ! Component: 2300 - total flux cleaned = 0.0015169 Jy ! Component: 2350 - total flux cleaned = 0.00148599 Jy ! Component: 2400 - total flux cleaned = 0.00145565 Jy ! Component: 2450 - total flux cleaned = 0.00150092 Jy ! Component: 2500 - total flux cleaned = 0.00145613 Jy ! Component: 2550 - total flux cleaned = 0.00141213 Jy ! Component: 2600 - total flux cleaned = 0.00142677 Jy ! Component: 2650 - total flux cleaned = 0.00141237 Jy ! Component: 2700 - total flux cleaned = 0.00136979 Jy ! Component: 2750 - total flux cleaned = 0.00132776 Jy ! Component: 2800 - total flux cleaned = 0.00131383 Jy ! Component: 2850 - total flux cleaned = 0.00134163 Jy ! Component: 2900 - total flux cleaned = 0.0013417 Jy ! Component: 2950 - total flux cleaned = 0.00139583 Jy ! Component: 3000 - total flux cleaned = 0.00136911 Jy ! Component: 3050 - total flux cleaned = 0.00146205 Jy ! Component: 3100 - total flux cleaned = 0.00143572 Jy ! Component: 3150 - total flux cleaned = 0.00146191 Jy ! Component: 3200 - total flux cleaned = 0.00148794 Jy ! Component: 3250 - total flux cleaned = 0.00152636 Jy ! Component: 3300 - total flux cleaned = 0.00151362 Jy ! Component: 3350 - total flux cleaned = 0.00153882 Jy ! Component: 3400 - total flux cleaned = 0.00157634 Jy ! Component: 3450 - total flux cleaned = 0.0016506 Jy ! Component: 3500 - total flux cleaned = 0.00163824 Jy ! Component: 3550 - total flux cleaned = 0.00173569 Jy ! Component: 3600 - total flux cleaned = 0.00177201 Jy ! Component: 3650 - total flux cleaned = 0.00179588 Jy ! Component: 3700 - total flux cleaned = 0.00184329 Jy ! Component: 3750 - total flux cleaned = 0.00192597 Jy ! Component: 3800 - total flux cleaned = 0.00198444 Jy ! Component: 3850 - total flux cleaned = 0.00201931 Jy ! Component: 3900 - total flux cleaned = 0.00207704 Jy ! Component: 3950 - total flux cleaned = 0.00211144 Jy ! Component: 4000 - total flux cleaned = 0.00219113 Jy ! Component: 4050 - total flux cleaned = 0.00224756 Jy ! Total flux subtracted in 4096 components = 0.00230372 Jy ! Clean residual min=-0.000657 max=0.000683 Jy/beam ! Clean residual mean=0.000002 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0921905 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 405 components and 0.0921905 Jy ![Exited script file: muppet] wmap "J0211-1558_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.002 x 8.068 at -5.759 degrees (North through East) ! Clean map min=-0.0011448 max=0.076321 Jy/beam ! Writing clean map to FITS file: J0211-1558_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0763213 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020365 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.800498 0.800498 1.601 3.20199 6.40399 12.808 25.6159 51.2319 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.002 x 8.068 at -5.759 degrees (North through East) ! Clean map min=-0.0011448 max=0.076321 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0211-1558_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:43:00 2019