! Started logfile: J0211+1707_S_2017_07_09_pus_uvs.log on Wed May 8 14:39:13 2019 obs J0211+1707_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0211+1707_S_2017_07_09_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973457 visibilities/baseline/integration-bin. ! Found source: J0211+1707 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0211+1707_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 743 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878001Jy sigma=0.008794 ! Fit after self-cal, rms=0.870615Jy sigma=0.008722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.784 mas, bmaj=6.769 mas, bpa=-4.453 degrees ! Estimated noise=778.638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967168 Jy ! Component: 100 - total flux cleaned = 0.124372 Jy ! Total flux subtracted in 100 components = 0.124372 Jy ! Clean residual min=-0.011724 max=0.035492 Jy/beam ! Clean residual mean=-0.000027 rms=0.003043 Jy/beam ! Combined flux in latest and established models = 0.124372 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.124372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097042Jy sigma=0.000946 ! Fit after self-cal, rms=0.096955Jy sigma=0.000946 ! Inverting map ! Added new window around map position (8.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310161 Jy ! Component: 100 - total flux cleaned = 0.047561 Jy ! Total flux subtracted in 100 components = 0.047561 Jy ! Clean residual min=-0.007166 max=0.014104 Jy/beam ! Clean residual mean=-0.000015 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.171933 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.171933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083819Jy sigma=0.000806 ! Fit after self-cal, rms=0.082583Jy sigma=0.000793 ! Inverting map ! Added new window around map position (4.5, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164026 Jy ! Component: 100 - total flux cleaned = 0.0265568 Jy ! Total flux subtracted in 100 components = 0.0265568 Jy ! Clean residual min=-0.005443 max=0.012732 Jy/beam ! Clean residual mean=-0.000004 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.19849 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 43 components and 0.19849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078167Jy sigma=0.000746 ! Fit after self-cal, rms=0.077916Jy sigma=0.000744 ! Inverting map ! Added new window around map position (23, -18.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118894 Jy ! Component: 100 - total flux cleaned = 0.0201975 Jy ! Total flux subtracted in 100 components = 0.0201975 Jy ! Clean residual min=-0.004449 max=0.005193 Jy/beam ! Clean residual mean=0.000000 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.218688 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 0.218688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075240Jy sigma=0.000715 ! Fit after self-cal, rms=0.075130Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=7.637 mas, bpa=-4.465 degrees ! Estimated noise=520.593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107551 Jy ! Component: 100 - total flux cleaned = 0.0187926 Jy ! Component: 150 - total flux cleaned = 0.024961 Jy ! Component: 200 - total flux cleaned = 0.0297475 Jy ! Total flux subtracted in 200 components = 0.0297475 Jy ! Clean residual min=-0.003459 max=0.004479 Jy/beam ! Clean residual mean=0.000006 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.248435 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 84 components and 0.248435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072955Jy sigma=0.000692 ! Fit after self-cal, rms=0.072875Jy sigma=0.000691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.95 KP 1.03 ! LA 0.95 MK 1.11 NL 0.90 OV 1.03 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.01 HN 0.99 KP 1.00 ! LA 0.93 MK 1.00 NL 1.01 OV 1.03 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.07 HN 0.96 KP 1.00 ! LA 0.94 MK 1.05 NL 0.99 OV 0.98 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.94 KP 1.00* ! LA 0.94 MK 1.24 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.072875Jy sigma=0.000691 ! Fit after self-cal, rms=0.071309Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=7.67 mas, bpa=-4.195 degrees ! Estimated noise=513.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234126 Jy ! Component: 100 - total flux cleaned = 0.00318666 Jy ! Component: 150 - total flux cleaned = 0.00362475 Jy ! Component: 200 - total flux cleaned = 0.00401699 Jy ! Total flux subtracted in 200 components = 0.00401699 Jy ! Clean residual min=-0.002836 max=0.003169 Jy/beam ! Clean residual mean=0.000003 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.252452 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 0.252452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071210Jy sigma=0.000680 ! Fit after self-cal, rms=0.071226Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071226Jy sigma=0.000680 ! Fit after self-cal, rms=0.072033Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.661 mas, bpa=-4.274 degrees ! Estimated noise=513.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013171 Jy ! Component: 100 - total flux cleaned = 0.00163478 Jy ! Component: 150 - total flux cleaned = 0.00186842 Jy ! Component: 200 - total flux cleaned = 0.00210063 Jy ! Total flux subtracted in 200 components = 0.00210063 Jy ! Clean residual min=-0.002099 max=0.002662 Jy/beam ! Clean residual mean=0.000004 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.254553 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 120 components and 0.254553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071985Jy sigma=0.000673 ! Fit after self-cal, rms=0.072012Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238375 Jy ! Component: 100 - total flux cleaned = 0.000432365 Jy ! Component: 150 - total flux cleaned = 0.000607063 Jy ! Component: 200 - total flux cleaned = 0.000742248 Jy ! Total flux subtracted in 200 components = 0.000742248 Jy ! Clean residual min=-0.002053 max=0.002594 Jy/beam ! Clean residual mean=0.000004 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.255295 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.255295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071994Jy sigma=0.000672 ! Fit after self-cal, rms=0.071993Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071993Jy sigma=0.000672 ! Fit after self-cal, rms=0.072305Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=7.656 mas, bpa=-4.29 degrees ! Estimated noise=513.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000540298 Jy ! Component: 100 - total flux cleaned = 0.000781378 Jy ! Component: 150 - total flux cleaned = 0.000948736 Jy ! Component: 200 - total flux cleaned = 0.0010795 Jy ! Total flux subtracted in 200 components = 0.0010795 Jy ! Clean residual min=-0.002039 max=0.002560 Jy/beam ! Clean residual mean=0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.256375 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 135 components and 0.256375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072289Jy sigma=0.000672 ! Fit after self-cal, rms=0.072292Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154029 Jy ! Component: 100 - total flux cleaned = 0.00027396 Jy ! Component: 150 - total flux cleaned = 0.00038538 Jy ! Component: 200 - total flux cleaned = 0.000455044 Jy ! Total flux subtracted in 200 components = 0.000455044 Jy ! Clean residual min=-0.001996 max=0.002522 Jy/beam ! Clean residual mean=0.000004 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.25683 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.25683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072283Jy sigma=0.000672 ! Fit after self-cal, rms=0.072282Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072282Jy sigma=0.000672 ! Fit after self-cal, rms=0.072331Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.399 mas, bmaj=11.62 mas, bpa=-9.491 degrees ! Estimated noise=631.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146122 Jy ! Component: 100 - total flux cleaned = 0.00185038 Jy ! Component: 150 - total flux cleaned = 0.0020544 Jy ! Component: 200 - total flux cleaned = 0.00211681 Jy ! Total flux subtracted in 200 components = 0.00211681 Jy ! Clean residual min=-0.003274 max=0.004066 Jy/beam ! Clean residual mean=0.000008 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.258947 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 144 components and 0.258947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072329Jy sigma=0.000672 ! Fit after self-cal, rms=0.072327Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189441 Jy ! Component: 100 - total flux cleaned = 0.000246181 Jy ! Component: 150 - total flux cleaned = 0.000294256 Jy ! Component: 200 - total flux cleaned = 0.000308349 Jy ! Total flux subtracted in 200 components = 0.000308349 Jy ! Clean residual min=-0.003188 max=0.004087 Jy/beam ! Clean residual mean=0.000008 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.259255 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.259255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072330Jy sigma=0.000672 ! Fit after self-cal, rms=0.072328Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.651 mas, bpa=-4.275 degrees ! Estimated noise=513.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 7.651 at -4.275 degrees (North through East) ! Clean map min=-0.0019813 max=0.12222 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=6.802 mas, bpa=-4.401 degrees ! Estimated noise=779.528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0974043 Jy ! Component: 100 - total flux cleaned = 0.13558 Jy ! Component: 150 - total flux cleaned = 0.160183 Jy ! Component: 200 - total flux cleaned = 0.178162 Jy ! Total flux subtracted in 200 components = 0.178162 Jy ! Clean residual min=-0.006120 max=0.010306 Jy/beam ! Clean residual mean=-0.000004 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.178162 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.178162 Jy ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.651 mas, bpa=-4.275 degrees ! Estimated noise=513.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188522 Jy ! Component: 100 - total flux cleaned = 0.0325715 Jy ! Component: 150 - total flux cleaned = 0.042934 Jy ! Component: 200 - total flux cleaned = 0.0508442 Jy ! Total flux subtracted in 200 components = 0.0508442 Jy ! Clean residual min=-0.003169 max=0.004860 Jy/beam ! Clean residual mean=0.000007 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.229007 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 56 components and 0.229007 Jy ! Inverting map ! Added new window around map position (19.5, -17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612835 Jy ! Component: 100 - total flux cleaned = 0.010846 Jy ! Component: 150 - total flux cleaned = 0.0145384 Jy ! Component: 200 - total flux cleaned = 0.017492 Jy ! Total flux subtracted in 200 components = 0.017492 Jy ! Clean residual min=-0.002350 max=0.002621 Jy/beam ! Clean residual mean=0.000006 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.246499 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 93 components and 0.246499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.399 mas, bmaj=11.62 mas, bpa=-9.491 degrees ! Estimated noise=631.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427725 Jy ! Component: 100 - total flux cleaned = 0.00708318 Jy ! Component: 150 - total flux cleaned = 0.00905423 Jy ! Component: 200 - total flux cleaned = 0.0104675 Jy ! Total flux subtracted in 200 components = 0.0104675 Jy ! Clean residual min=-0.003232 max=0.004037 Jy/beam ! Clean residual mean=0.000007 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.256966 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103178 Jy ! Component: 100 - total flux cleaned = 0.0017933 Jy ! Component: 150 - total flux cleaned = 0.00221432 Jy ! Component: 200 - total flux cleaned = 0.00238827 Jy ! Total flux subtracted in 200 components = 0.00238827 Jy ! Clean residual min=-0.003167 max=0.004099 Jy/beam ! Clean residual mean=0.000006 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.259354 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 147 components and 0.259354 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.651 mas, bpa=-4.275 degrees ! Estimated noise=513.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136348 Jy ! Component: 100 - total flux cleaned = 0.000171886 Jy ! Component: 150 - total flux cleaned = 0.000201883 Jy ! Component: 200 - total flux cleaned = 0.000315237 Jy ! Total flux subtracted in 200 components = 0.000315237 Jy ! Clean residual min=-0.002132 max=0.002606 Jy/beam ! Clean residual mean=0.000003 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.25967 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 0.25967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072311Jy sigma=0.000672 ! Fit after self-cal, rms=0.072295Jy sigma=0.000671 wmodel J0211+1707_S_2017_07_09_pus_map.mod ! Writing 169 model components to file: J0211+1707_S_2017_07_09_pus_map.mod wobs J0211+1707_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0211+1707_S_2017_07_09_pus_uvs.fits wwins J0211+1707_S_2017_07_09_pus_map.win ! wwins: Wrote 5 windows to J0211+1707_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113178 Jy ! Component: 100 - total flux cleaned = 0.00194246 Jy ! Component: 150 - total flux cleaned = 0.00269946 Jy ! Component: 200 - total flux cleaned = 0.00338186 Jy ! Component: 250 - total flux cleaned = 0.00389669 Jy ! Component: 300 - total flux cleaned = 0.00429162 Jy ! Component: 350 - total flux cleaned = 0.00464106 Jy ! Component: 400 - total flux cleaned = 0.00488691 Jy ! Component: 450 - total flux cleaned = 0.00509526 Jy ! Component: 500 - total flux cleaned = 0.0052103 Jy ! Component: 550 - total flux cleaned = 0.00535004 Jy ! Component: 600 - total flux cleaned = 0.00540471 Jy ! Component: 650 - total flux cleaned = 0.00543188 Jy ! Component: 700 - total flux cleaned = 0.0055098 Jy ! Component: 750 - total flux cleaned = 0.00556025 Jy ! Component: 800 - total flux cleaned = 0.00558498 Jy ! Component: 850 - total flux cleaned = 0.00568128 Jy ! Component: 900 - total flux cleaned = 0.00572911 Jy ! Component: 950 - total flux cleaned = 0.00579855 Jy ! Component: 1000 - total flux cleaned = 0.00582176 Jy ! Component: 1050 - total flux cleaned = 0.00595572 Jy ! Component: 1100 - total flux cleaned = 0.00599928 Jy ! Component: 1150 - total flux cleaned = 0.0060633 Jy ! Component: 1200 - total flux cleaned = 0.00610514 Jy ! Component: 1250 - total flux cleaned = 0.00614651 Jy ! Component: 1300 - total flux cleaned = 0.00610527 Jy ! Component: 1350 - total flux cleaned = 0.00602493 Jy ! Component: 1400 - total flux cleaned = 0.00604469 Jy ! Component: 1450 - total flux cleaned = 0.00600544 Jy ! Component: 1500 - total flux cleaned = 0.00598609 Jy ! Component: 1550 - total flux cleaned = 0.0059103 Jy ! Component: 1600 - total flux cleaned = 0.0058727 Jy ! Component: 1650 - total flux cleaned = 0.00574305 Jy ! Component: 1700 - total flux cleaned = 0.00568832 Jy ! Component: 1750 - total flux cleaned = 0.00561636 Jy ! Component: 1800 - total flux cleaned = 0.00554534 Jy ! Component: 1850 - total flux cleaned = 0.00551028 Jy ! Component: 1900 - total flux cleaned = 0.00544058 Jy ! Component: 1950 - total flux cleaned = 0.00535455 Jy ! Component: 2000 - total flux cleaned = 0.0053547 Jy ! Component: 2050 - total flux cleaned = 0.00527051 Jy ! Component: 2100 - total flux cleaned = 0.00522071 Jy ! Component: 2150 - total flux cleaned = 0.00517133 Jy ! Component: 2200 - total flux cleaned = 0.00513872 Jy ! Component: 2250 - total flux cleaned = 0.00504194 Jy ! Component: 2300 - total flux cleaned = 0.00497799 Jy ! Component: 2350 - total flux cleaned = 0.00488318 Jy ! Component: 2400 - total flux cleaned = 0.00483641 Jy ! Component: 2450 - total flux cleaned = 0.00480549 Jy ! Component: 2500 - total flux cleaned = 0.00474408 Jy ! Component: 2550 - total flux cleaned = 0.004714 Jy ! Component: 2600 - total flux cleaned = 0.00465368 Jy ! Component: 2650 - total flux cleaned = 0.00463906 Jy ! Component: 2700 - total flux cleaned = 0.00465373 Jy ! Component: 2750 - total flux cleaned = 0.00455125 Jy ! Component: 2800 - total flux cleaned = 0.0045805 Jy ! Component: 2850 - total flux cleaned = 0.00448013 Jy ! Component: 2900 - total flux cleaned = 0.00445156 Jy ! Component: 2950 - total flux cleaned = 0.00438103 Jy ! Component: 3000 - total flux cleaned = 0.00435314 Jy ! Component: 3050 - total flux cleaned = 0.00432547 Jy ! Component: 3100 - total flux cleaned = 0.00428415 Jy ! Component: 3150 - total flux cleaned = 0.00422961 Jy ! Component: 3200 - total flux cleaned = 0.00421618 Jy ! Component: 3250 - total flux cleaned = 0.00420298 Jy ! Component: 3300 - total flux cleaned = 0.00418956 Jy ! Component: 3350 - total flux cleaned = 0.00418941 Jy ! Component: 3400 - total flux cleaned = 0.00409781 Jy ! Component: 3450 - total flux cleaned = 0.00407189 Jy ! Component: 3500 - total flux cleaned = 0.00404611 Jy ! Component: 3550 - total flux cleaned = 0.00399504 Jy ! Component: 3600 - total flux cleaned = 0.00398225 Jy ! Component: 3650 - total flux cleaned = 0.00398225 Jy ! Component: 3700 - total flux cleaned = 0.00389521 Jy ! Component: 3750 - total flux cleaned = 0.00383364 Jy ! Component: 3800 - total flux cleaned = 0.00384603 Jy ! Component: 3850 - total flux cleaned = 0.00383385 Jy ! Component: 3900 - total flux cleaned = 0.00383366 Jy ! Component: 3950 - total flux cleaned = 0.00379763 Jy ! Component: 4000 - total flux cleaned = 0.00382146 Jy ! Component: 4050 - total flux cleaned = 0.00371513 Jy ! Total flux subtracted in 4096 components = 0.00375037 Jy ! Clean residual min=-0.000773 max=0.000637 Jy/beam ! Clean residual mean=-0.000003 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.26342 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 526 components and 0.26342 Jy ![Exited script file: muppet] wmap "J0211+1707_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 7.651 at -4.275 degrees (North through East) ! Clean map min=-0.0013335 max=0.12239 Jy/beam ! Writing clean map to FITS file: J0211+1707_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235439 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.577093 0.577093 1.15419 2.30837 4.61674 9.23348 18.467 36.9339 73.8678 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 7.651 at -4.275 degrees (North through East) ! Clean map min=-0.0013335 max=0.12239 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0211+1707_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:39:21 2019