! Started logfile: J0210-1444_S_2017_06_10_pus_uvs.log on Mon May 6 14:42:49 2019 obs J0210-1444_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0210-1444_S_2017_06_10_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777481 visibilities/baseline/integration-bin. ! Found source: J0210-1444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 10496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0210-1444_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 461 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.837180Jy sigma=0.007435 ! Fit after self-cal, rms=0.830304Jy sigma=0.007381 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=7.405 mas, bpa=-6.151 degrees ! Estimated noise=1254.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12881 Jy ! Component: 100 - total flux cleaned = 0.162277 Jy ! Total flux subtracted in 100 components = 0.162277 Jy ! Clean residual min=-0.006254 max=0.015315 Jy/beam ! Clean residual mean=-0.000034 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.162277 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.162277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084520Jy sigma=0.000734 ! Fit after self-cal, rms=0.084528Jy sigma=0.000734 ! Inverting map ! Added new window around map position (-3, 10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167444 Jy ! Component: 100 - total flux cleaned = 0.0270646 Jy ! Total flux subtracted in 100 components = 0.0270646 Jy ! Clean residual min=-0.005490 max=0.007508 Jy/beam ! Clean residual mean=-0.000021 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.189341 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.189341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080344Jy sigma=0.000693 ! Fit after self-cal, rms=0.080314Jy sigma=0.000693 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.339 mas, bpa=-4.412 degrees ! Estimated noise=895.343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971093 Jy ! Component: 100 - total flux cleaned = 0.0158956 Jy ! Component: 150 - total flux cleaned = 0.0202366 Jy ! Component: 200 - total flux cleaned = 0.023372 Jy ! Total flux subtracted in 200 components = 0.023372 Jy ! Clean residual min=-0.003920 max=0.003562 Jy/beam ! Clean residual mean=-0.000004 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.212713 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 88 components and 0.212713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078964Jy sigma=0.000680 ! Fit after self-cal, rms=0.078944Jy sigma=0.000680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00 KP 1.04 ! LA 1.02 MK 1.04 NL 0.91 OV 1.00 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.01 KP 0.97 ! LA 0.96 MK 0.99 NL 1.03 OV 1.04 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.02 KP 0.95 ! LA 0.98 MK 1.03 NL 0.99 OV 0.92 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.07 KP 1.00* ! LA 1.00* MK 0.96 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.078944Jy sigma=0.000680 ! Fit after self-cal, rms=0.077833Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.373 mas, bpa=-4.292 degrees ! Estimated noise=889.074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118897 Jy ! Component: 100 - total flux cleaned = 0.00135209 Jy ! Component: 150 - total flux cleaned = 0.00153984 Jy ! Component: 200 - total flux cleaned = 0.00162247 Jy ! Total flux subtracted in 200 components = 0.00162247 Jy ! Clean residual min=-0.003769 max=0.002907 Jy/beam ! Clean residual mean=-0.000002 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.214336 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.214336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077764Jy sigma=0.000675 ! Fit after self-cal, rms=0.077771Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077771Jy sigma=0.000675 ! Fit after self-cal, rms=0.077716Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=8.398 mas, bpa=-4.361 degrees ! Estimated noise=888.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346982 Jy ! Component: 100 - total flux cleaned = 0.000350963 Jy ! Component: 150 - total flux cleaned = 0.000384657 Jy ! Component: 200 - total flux cleaned = 0.000413456 Jy ! Total flux subtracted in 200 components = 0.000413456 Jy ! Clean residual min=-0.002696 max=0.002392 Jy/beam ! Clean residual mean=-0.000009 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.214749 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.214749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077684Jy sigma=0.000671 ! Fit after self-cal, rms=0.077687Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56873e-05 Jy ! Component: 100 - total flux cleaned = -3.58957e-05 Jy ! Component: 150 - total flux cleaned = -3.55736e-05 Jy ! Component: 200 - total flux cleaned = -3.48158e-05 Jy ! Total flux subtracted in 200 components = -3.48158e-05 Jy ! Clean residual min=-0.002643 max=0.002325 Jy/beam ! Clean residual mean=-0.000009 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.214714 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 0.214714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077674Jy sigma=0.000671 ! Fit after self-cal, rms=0.077672Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077672Jy sigma=0.000671 ! Fit after self-cal, rms=0.077661Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=8.408 mas, bpa=-4.423 degrees ! Estimated noise=888.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.1076e-05 Jy ! Component: 100 - total flux cleaned = 0.000106509 Jy ! Component: 150 - total flux cleaned = 0.000149764 Jy ! Component: 200 - total flux cleaned = 0.000149459 Jy ! Total flux subtracted in 200 components = 0.000149459 Jy ! Clean residual min=-0.002548 max=0.002248 Jy/beam ! Clean residual mean=-0.000009 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.214864 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.214864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077647Jy sigma=0.000671 ! Fit after self-cal, rms=0.077645Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.3673e-05 Jy ! Component: 100 - total flux cleaned = -4.78934e-05 Jy ! Component: 150 - total flux cleaned = -6.3972e-05 Jy ! Component: 200 - total flux cleaned = -9.46606e-05 Jy ! Total flux subtracted in 200 components = -9.46606e-05 Jy ! Clean residual min=-0.002521 max=0.002238 Jy/beam ! Clean residual mean=-0.000009 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.214769 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 139 components and 0.214769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077639Jy sigma=0.000671 ! Fit after self-cal, rms=0.077639Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077639Jy sigma=0.000671 ! Fit after self-cal, rms=0.077643Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.282 mas, bmaj=17.02 mas, bpa=-4.853 degrees ! Estimated noise=1139.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730047 Jy ! Component: 100 - total flux cleaned = 0.000706639 Jy ! Component: 150 - total flux cleaned = 0.000662452 Jy ! Component: 200 - total flux cleaned = 0.000622074 Jy ! Total flux subtracted in 200 components = 0.000622074 Jy ! Clean residual min=-0.002624 max=0.003314 Jy/beam ! Clean residual mean=-0.000019 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.215391 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 144 components and 0.215391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077642Jy sigma=0.000671 ! Fit after self-cal, rms=0.077640Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81322e-05 Jy ! Component: 100 - total flux cleaned = 1.00971e-05 Jy ! Component: 150 - total flux cleaned = -2.44597e-05 Jy ! Component: 200 - total flux cleaned = -4.03201e-05 Jy ! Total flux subtracted in 200 components = -4.03201e-05 Jy ! Clean residual min=-0.002586 max=0.003315 Jy/beam ! Clean residual mean=-0.000019 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.215351 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 148 components and 0.215351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077642Jy sigma=0.000671 ! Fit after self-cal, rms=0.077641Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=8.418 mas, bpa=-4.458 degrees ! Estimated noise=887.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 8.418 at -4.458 degrees (North through East) ! Clean map min=-0.0023927 max=0.16336 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=7.461 mas, bpa=-6.11 degrees ! Estimated noise=1247.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127862 Jy ! Component: 100 - total flux cleaned = 0.160632 Jy ! Component: 150 - total flux cleaned = 0.176567 Jy ! Component: 200 - total flux cleaned = 0.18669 Jy ! Total flux subtracted in 200 components = 0.18669 Jy ! Clean residual min=-0.003987 max=0.005515 Jy/beam ! Clean residual mean=-0.000024 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.18669 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.18669 Jy ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=8.418 mas, bpa=-4.458 degrees ! Estimated noise=887.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00929686 Jy ! Component: 100 - total flux cleaned = 0.0150675 Jy ! Component: 150 - total flux cleaned = 0.0189713 Jy ! Component: 200 - total flux cleaned = 0.0216954 Jy ! Total flux subtracted in 200 components = 0.0216954 Jy ! Clean residual min=-0.002863 max=0.002566 Jy/beam ! Clean residual mean=-0.000013 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.208385 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 82 components and 0.208385 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.282 mas, bmaj=17.02 mas, bpa=-4.853 degrees ! Estimated noise=1139.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353134 Jy ! Component: 100 - total flux cleaned = 0.00536219 Jy ! Component: 150 - total flux cleaned = 0.00636939 Jy ! Component: 200 - total flux cleaned = 0.0067768 Jy ! Total flux subtracted in 200 components = 0.0067768 Jy ! Clean residual min=-0.002728 max=0.003374 Jy/beam ! Clean residual mean=-0.000019 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.215162 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.9961e-05 Jy ! Component: 100 - total flux cleaned = -1.9983e-05 Jy ! Component: 150 - total flux cleaned = -3.86195e-05 Jy ! Component: 200 - total flux cleaned = -5.59567e-05 Jy ! Total flux subtracted in 200 components = -5.59567e-05 Jy ! Clean residual min=-0.002665 max=0.003340 Jy/beam ! Clean residual mean=-0.000019 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.215106 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 119 components and 0.215106 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=8.418 mas, bpa=-4.458 degrees ! Estimated noise=887.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000405047 Jy ! Component: 100 - total flux cleaned = -0.000581785 Jy ! Component: 150 - total flux cleaned = -0.000684893 Jy ! Component: 200 - total flux cleaned = -0.000731749 Jy ! Total flux subtracted in 200 components = -0.000731749 Jy ! Clean residual min=-0.002505 max=0.002325 Jy/beam ! Clean residual mean=-0.000009 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.214374 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 0.214374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077659Jy sigma=0.000671 ! Fit after self-cal, rms=0.077656Jy sigma=0.000671 wmodel J0210-1444_S_2017_06_10_pus_map.mod ! Writing 133 model components to file: J0210-1444_S_2017_06_10_pus_map.mod wobs J0210-1444_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0210-1444_S_2017_06_10_pus_uvs.fits wwins J0210-1444_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J0210-1444_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000470743 Jy ! Component: 100 - total flux cleaned = -0.000671019 Jy ! Component: 150 - total flux cleaned = -0.000783653 Jy ! Component: 200 - total flux cleaned = -0.000782859 Jy ! Component: 250 - total flux cleaned = -0.000748299 Jy ! Component: 300 - total flux cleaned = -0.000748063 Jy ! Component: 350 - total flux cleaned = -0.000779629 Jy ! Component: 400 - total flux cleaned = -0.000779815 Jy ! Component: 450 - total flux cleaned = -0.00095709 Jy ! Component: 500 - total flux cleaned = -0.00101383 Jy ! Component: 550 - total flux cleaned = -0.00104137 Jy ! Component: 600 - total flux cleaned = -0.00106889 Jy ! Component: 650 - total flux cleaned = -0.00114902 Jy ! Component: 700 - total flux cleaned = -0.00130543 Jy ! Component: 750 - total flux cleaned = -0.00143285 Jy ! Component: 800 - total flux cleaned = -0.00158219 Jy ! Component: 850 - total flux cleaned = -0.0017772 Jy ! Component: 900 - total flux cleaned = -0.00199281 Jy ! Component: 950 - total flux cleaned = -0.00213323 Jy ! Component: 1000 - total flux cleaned = -0.0022948 Jy ! Component: 1050 - total flux cleaned = -0.00243075 Jy ! Component: 1100 - total flux cleaned = -0.002609 Jy ! Component: 1150 - total flux cleaned = -0.00271804 Jy ! Component: 1200 - total flux cleaned = -0.00276079 Jy ! Component: 1250 - total flux cleaned = -0.00282478 Jy ! Component: 1300 - total flux cleaned = -0.00294975 Jy ! Component: 1350 - total flux cleaned = -0.0029911 Jy ! Component: 1400 - total flux cleaned = -0.00305183 Jy ! Component: 1450 - total flux cleaned = -0.00305214 Jy ! Component: 1500 - total flux cleaned = -0.00311101 Jy ! Component: 1550 - total flux cleaned = -0.00316838 Jy ! Component: 1600 - total flux cleaned = -0.00314938 Jy ! Component: 1650 - total flux cleaned = -0.00316842 Jy ! Component: 1700 - total flux cleaned = -0.00318686 Jy ! Component: 1750 - total flux cleaned = -0.00318658 Jy ! Component: 1800 - total flux cleaned = -0.0031329 Jy ! Component: 1850 - total flux cleaned = -0.00313323 Jy ! Component: 1900 - total flux cleaned = -0.00315079 Jy ! Component: 1950 - total flux cleaned = -0.00308194 Jy ! Component: 2000 - total flux cleaned = -0.00315005 Jy ! Component: 2050 - total flux cleaned = -0.003116 Jy ! Component: 2100 - total flux cleaned = -0.00304967 Jy ! Component: 2150 - total flux cleaned = -0.00303351 Jy ! Component: 2200 - total flux cleaned = -0.00300149 Jy ! Component: 2250 - total flux cleaned = -0.00296961 Jy ! Component: 2300 - total flux cleaned = -0.00293793 Jy ! Component: 2350 - total flux cleaned = -0.00285996 Jy ! Component: 2400 - total flux cleaned = -0.00281348 Jy ! Component: 2450 - total flux cleaned = -0.00275252 Jy ! Component: 2500 - total flux cleaned = -0.00267724 Jy ! Component: 2550 - total flux cleaned = -0.00267743 Jy ! Component: 2600 - total flux cleaned = -0.00255967 Jy ! Component: 2650 - total flux cleaned = -0.00254525 Jy ! Component: 2700 - total flux cleaned = -0.00247342 Jy ! Component: 2750 - total flux cleaned = -0.0024452 Jy ! Component: 2800 - total flux cleaned = -0.00238906 Jy ! Component: 2850 - total flux cleaned = -0.00237517 Jy ! Component: 2900 - total flux cleaned = -0.00227887 Jy ! Component: 2950 - total flux cleaned = -0.00225175 Jy ! Component: 3000 - total flux cleaned = -0.00229227 Jy ! Component: 3050 - total flux cleaned = -0.00225209 Jy ! Component: 3100 - total flux cleaned = -0.00222566 Jy ! Component: 3150 - total flux cleaned = -0.00216018 Jy ! Component: 3200 - total flux cleaned = -0.00210855 Jy ! Component: 3250 - total flux cleaned = -0.00208286 Jy ! Component: 3300 - total flux cleaned = -0.00203196 Jy ! Component: 3350 - total flux cleaned = -0.00195654 Jy ! Component: 3400 - total flux cleaned = -0.00196922 Jy ! Component: 3450 - total flux cleaned = -0.00190726 Jy ! Component: 3500 - total flux cleaned = -0.00190726 Jy ! Component: 3550 - total flux cleaned = -0.00189503 Jy ! Component: 3600 - total flux cleaned = -0.00184682 Jy ! Component: 3650 - total flux cleaned = -0.00184689 Jy ! Component: 3700 - total flux cleaned = -0.00179934 Jy ! Component: 3750 - total flux cleaned = -0.00176426 Jy ! Component: 3800 - total flux cleaned = -0.00175276 Jy ! Component: 3850 - total flux cleaned = -0.00171809 Jy ! Component: 3900 - total flux cleaned = -0.00172951 Jy ! Component: 3950 - total flux cleaned = -0.00171824 Jy ! Component: 4000 - total flux cleaned = -0.00168426 Jy ! Component: 4050 - total flux cleaned = -0.00168426 Jy ! Total flux subtracted in 4096 components = -0.00162859 Jy ! Clean residual min=-0.000778 max=0.000865 Jy/beam ! Clean residual mean=-0.000002 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.212746 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 432 components and 0.212746 Jy ![Exited script file: muppet] wmap "J0210-1444_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 8.418 at -4.458 degrees (North through East) ! Clean map min=-0.0017624 max=0.16473 Jy/beam ! Writing clean map to FITS file: J0210-1444_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164733 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.365516 0.365516 0.731032 1.46206 2.92413 5.84825 11.6965 23.393 46.786 93.5721 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 8.418 at -4.458 degrees (North through East) ! Clean map min=-0.0017624 max=0.16473 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0210-1444_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:42:55 2019