! Started logfile: J0210-0737_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:56 2019 obs J0210-0737_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0210-0737_S_2017_08_12_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608382 visibilities/baseline/integration-bin. ! Found source: J0210-0737 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 12484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0210-0737_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 855 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939732Jy sigma=0.007894 ! Fit after self-cal, rms=0.924560Jy sigma=0.007777 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=6.999 mas, bpa=-5.121 degrees ! Estimated noise=1329.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596281 Jy ! Component: 100 - total flux cleaned = 0.0734275 Jy ! Total flux subtracted in 100 components = 0.0734275 Jy ! Clean residual min=-0.004839 max=0.005861 Jy/beam ! Clean residual mean=0.000005 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.0734275 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0734275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082753Jy sigma=0.000663 ! Fit after self-cal, rms=0.082713Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=7.705 mas, bpa=-5.515 degrees ! Estimated noise=883.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075976 Jy ! Component: 100 - total flux cleaned = 0.0112414 Jy ! Component: 150 - total flux cleaned = 0.0132503 Jy ! Component: 200 - total flux cleaned = 0.0144109 Jy ! Total flux subtracted in 200 components = 0.0144109 Jy ! Clean residual min=-0.003581 max=0.007868 Jy/beam ! Clean residual mean=-0.000000 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.0878383 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0878383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082086Jy sigma=0.000657 ! Fit after self-cal, rms=0.082057Jy sigma=0.000656 ! Inverting map ! Added new window around map position (7.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070429 Jy ! Component: 100 - total flux cleaned = 0.0105862 Jy ! Component: 150 - total flux cleaned = 0.0126498 Jy ! Component: 200 - total flux cleaned = 0.0134686 Jy ! Total flux subtracted in 200 components = 0.0134686 Jy ! Clean residual min=-0.002802 max=0.002622 Jy/beam ! Clean residual mean=0.000001 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.101307 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 68 components and 0.101307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081493Jy sigma=0.000651 ! Fit after self-cal, rms=0.081389Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.99 ! LA 1.01 MK 1.02 NL 0.93 OV 1.00 ! PT 1.04 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.00 ! LA 0.96 MK 1.02 NL 1.11 OV 1.03 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 0.92 ! LA 0.94 MK 1.02 NL 1.03 OV 1.04 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! A total of 285 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.081389Jy sigma=0.000650 ! Fit after self-cal, rms=0.080922Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.7 mas, bpa=-4.47 degrees ! Estimated noise=893.074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202565 Jy ! Component: 100 - total flux cleaned = 0.00258067 Jy ! Component: 150 - total flux cleaned = 0.00288069 Jy ! Component: 200 - total flux cleaned = 0.00290568 Jy ! Total flux subtracted in 200 components = 0.00290568 Jy ! Clean residual min=-0.002727 max=0.002288 Jy/beam ! Clean residual mean=0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.104213 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 97 components and 0.104213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080870Jy sigma=0.000652 ! Fit after self-cal, rms=0.080847Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080847Jy sigma=0.000652 ! Fit after self-cal, rms=0.081200Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.699 mas, bpa=-4.503 degrees ! Estimated noise=893.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113598 Jy ! Component: 100 - total flux cleaned = 0.00166347 Jy ! Component: 150 - total flux cleaned = 0.00182441 Jy ! Component: 200 - total flux cleaned = 0.0018935 Jy ! Total flux subtracted in 200 components = 0.0018935 Jy ! Clean residual min=-0.002255 max=0.002320 Jy/beam ! Clean residual mean=0.000003 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.106106 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.106106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081184Jy sigma=0.000651 ! Fit after self-cal, rms=0.081204Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299008 Jy ! Component: 100 - total flux cleaned = 0.000453467 Jy ! Component: 150 - total flux cleaned = 0.00052652 Jy ! Component: 200 - total flux cleaned = 0.000605176 Jy ! Total flux subtracted in 200 components = 0.000605176 Jy ! Clean residual min=-0.002244 max=0.002278 Jy/beam ! Clean residual mean=0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.106711 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.106711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081199Jy sigma=0.000651 ! Fit after self-cal, rms=0.081198Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081198Jy sigma=0.000651 ! Fit after self-cal, rms=0.081244Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.7 mas, bpa=-4.546 degrees ! Estimated noise=893.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677895 Jy ! Component: 100 - total flux cleaned = 0.000991471 Jy ! Component: 150 - total flux cleaned = 0.00105746 Jy ! Component: 200 - total flux cleaned = 0.00112798 Jy ! Total flux subtracted in 200 components = 0.00112798 Jy ! Clean residual min=-0.002210 max=0.002247 Jy/beam ! Clean residual mean=0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.107839 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 139 components and 0.107839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081238Jy sigma=0.000651 ! Fit after self-cal, rms=0.081238Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127.5, -111). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168897 Jy ! Component: 100 - total flux cleaned = 0.00189041 Jy ! Component: 150 - total flux cleaned = 0.00199168 Jy ! Component: 200 - total flux cleaned = 0.0019704 Jy ! Total flux subtracted in 200 components = 0.0019704 Jy ! Clean residual min=-0.002133 max=0.001729 Jy/beam ! Clean residual mean=0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.10981 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 0.10981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081192Jy sigma=0.000651 ! Fit after self-cal, rms=0.081182Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081182Jy sigma=0.000651 ! Fit after self-cal, rms=0.081030Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.779 mas, bmaj=14.7 mas, bpa=-6.123 degrees ! Estimated noise=1196.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206706 Jy ! Component: 100 - total flux cleaned = 0.000299848 Jy ! Component: 150 - total flux cleaned = 0.000369105 Jy ! Component: 200 - total flux cleaned = 0.000383584 Jy ! Total flux subtracted in 200 components = 0.000383584 Jy ! Clean residual min=-0.002781 max=0.002186 Jy/beam ! Clean residual mean=0.000006 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.110193 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 168 components and 0.110193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081029Jy sigma=0.000650 ! Fit after self-cal, rms=0.081028Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.92132e-05 Jy ! Component: 100 - total flux cleaned = 1.9122e-05 Jy ! Component: 150 - total flux cleaned = 8.14273e-06 Jy ! Component: 200 - total flux cleaned = -1.23003e-05 Jy ! Total flux subtracted in 200 components = -1.23003e-05 Jy ! Clean residual min=-0.002714 max=0.002197 Jy/beam ! Clean residual mean=0.000006 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.110181 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 173 components and 0.110181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081030Jy sigma=0.000650 ! Fit after self-cal, rms=0.081029Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.704 mas, bpa=-4.631 degrees ! Estimated noise=891.707 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.704 at -4.631 degrees (North through East) ! Clean map min=-0.0020387 max=0.07779 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=6.996 mas, bpa=-4.145 degrees ! Estimated noise=1350.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058832 Jy ! Component: 100 - total flux cleaned = 0.0733343 Jy ! Component: 150 - total flux cleaned = 0.0812426 Jy ! Component: 200 - total flux cleaned = 0.0869623 Jy ! Total flux subtracted in 200 components = 0.0869623 Jy ! Clean residual min=-0.004107 max=0.004009 Jy/beam ! Clean residual mean=0.000003 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.0869623 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0869623 Jy ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.704 mas, bpa=-4.631 degrees ! Estimated noise=891.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659464 Jy ! Component: 100 - total flux cleaned = 0.0108401 Jy ! Component: 150 - total flux cleaned = 0.0139702 Jy ! Component: 200 - total flux cleaned = 0.0163522 Jy ! Total flux subtracted in 200 components = 0.0163522 Jy ! Clean residual min=-0.002508 max=0.001894 Jy/beam ! Clean residual mean=0.000003 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.103315 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 66 components and 0.103315 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.779 mas, bmaj=14.7 mas, bpa=-6.123 degrees ! Estimated noise=1196.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298233 Jy ! Component: 100 - total flux cleaned = 0.00443941 Jy ! Component: 150 - total flux cleaned = 0.00506879 Jy ! Component: 200 - total flux cleaned = 0.0053409 Jy ! Total flux subtracted in 200 components = 0.0053409 Jy ! Clean residual min=-0.002954 max=0.002316 Jy/beam ! Clean residual mean=0.000006 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.108655 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247506 Jy ! Component: 100 - total flux cleaned = 0.000431375 Jy ! Component: 150 - total flux cleaned = 0.000603498 Jy ! Component: 200 - total flux cleaned = 0.000676916 Jy ! Total flux subtracted in 200 components = 0.000676916 Jy ! Clean residual min=-0.002815 max=0.002319 Jy/beam ! Clean residual mean=0.000006 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.109332 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 102 components and 0.109332 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.704 mas, bpa=-4.631 degrees ! Estimated noise=891.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.57551e-05 Jy ! Component: 100 - total flux cleaned = 5.64989e-05 Jy ! Component: 150 - total flux cleaned = 0.000139524 Jy ! Component: 200 - total flux cleaned = 0.000190613 Jy ! Total flux subtracted in 200 components = 0.000190613 Jy ! Clean residual min=-0.002113 max=0.001838 Jy/beam ! Clean residual mean=0.000003 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.109523 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 124 components and 0.109523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081034Jy sigma=0.000651 ! Fit after self-cal, rms=0.081036Jy sigma=0.000650 wmodel J0210-0737_S_2017_08_12_pus_map.mod ! Writing 124 model components to file: J0210-0737_S_2017_08_12_pus_map.mod wobs J0210-0737_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0210-0737_S_2017_08_12_pus_uvs.fits wwins J0210-0737_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J0210-0737_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000882223 Jy ! Component: 100 - total flux cleaned = -0.00142024 Jy ! Component: 150 - total flux cleaned = -0.00167121 Jy ! Component: 200 - total flux cleaned = -0.00178847 Jy ! Component: 250 - total flux cleaned = -0.00190089 Jy ! Component: 300 - total flux cleaned = -0.00203632 Jy ! Component: 350 - total flux cleaned = -0.00208898 Jy ! Component: 400 - total flux cleaned = -0.00213957 Jy ! Component: 450 - total flux cleaned = -0.00211536 Jy ! Component: 500 - total flux cleaned = -0.00206812 Jy ! Component: 550 - total flux cleaned = -0.00202177 Jy ! Component: 600 - total flux cleaned = -0.0019322 Jy ! Component: 650 - total flux cleaned = -0.00184507 Jy ! Component: 700 - total flux cleaned = -0.00173867 Jy ! Component: 750 - total flux cleaned = -0.00165551 Jy ! Component: 800 - total flux cleaned = -0.00151374 Jy ! Component: 850 - total flux cleaned = -0.00149469 Jy ! Component: 900 - total flux cleaned = -0.00149444 Jy ! Component: 950 - total flux cleaned = -0.00141894 Jy ! Component: 1000 - total flux cleaned = -0.00134491 Jy ! Component: 1050 - total flux cleaned = -0.00129068 Jy ! Component: 1100 - total flux cleaned = -0.00127301 Jy ! Component: 1150 - total flux cleaned = -0.00118565 Jy ! Component: 1200 - total flux cleaned = -0.00115154 Jy ! Component: 1250 - total flux cleaned = -0.00111734 Jy ! Component: 1300 - total flux cleaned = -0.00105059 Jy ! Component: 1350 - total flux cleaned = -0.00100147 Jy ! Component: 1400 - total flux cleaned = -0.000953419 Jy ! Component: 1450 - total flux cleaned = -0.000859303 Jy ! Component: 1500 - total flux cleaned = -0.000890113 Jy ! Component: 1550 - total flux cleaned = -0.000829445 Jy ! Component: 1600 - total flux cleaned = -0.000799656 Jy ! Component: 1650 - total flux cleaned = -0.000770315 Jy ! Component: 1700 - total flux cleaned = -0.000712734 Jy ! Component: 1750 - total flux cleaned = -0.000684525 Jy ! Component: 1800 - total flux cleaned = -0.000628483 Jy ! Component: 1850 - total flux cleaned = -0.000614594 Jy ! Component: 1900 - total flux cleaned = -0.000573787 Jy ! Component: 1950 - total flux cleaned = -0.000506666 Jy ! Component: 2000 - total flux cleaned = -0.000454105 Jy ! Component: 2050 - total flux cleaned = -0.000441057 Jy ! Component: 2100 - total flux cleaned = -0.000402583 Jy ! Component: 2150 - total flux cleaned = -0.0003268 Jy ! Component: 2200 - total flux cleaned = -0.000277099 Jy ! Component: 2250 - total flux cleaned = -0.000240275 Jy ! Component: 2300 - total flux cleaned = -0.000191763 Jy ! Component: 2350 - total flux cleaned = -0.000179584 Jy ! Component: 2400 - total flux cleaned = -0.000167684 Jy ! Component: 2450 - total flux cleaned = -0.000109251 Jy ! Component: 2500 - total flux cleaned = -0.000120834 Jy ! Component: 2550 - total flux cleaned = -0.000120694 Jy ! Component: 2600 - total flux cleaned = -0.000131718 Jy ! Component: 2650 - total flux cleaned = -9.82849e-05 Jy ! Component: 2700 - total flux cleaned = -9.84367e-05 Jy ! Component: 2750 - total flux cleaned = -0.000109302 Jy ! Component: 2800 - total flux cleaned = -9.84458e-05 Jy ! Component: 2850 - total flux cleaned = -9.83059e-05 Jy ! Component: 2900 - total flux cleaned = -5.6025e-05 Jy ! Component: 2950 - total flux cleaned = -6.65336e-05 Jy ! Component: 3000 - total flux cleaned = -3.55102e-05 Jy ! Component: 3050 - total flux cleaned = -4.5818e-05 Jy ! Component: 3100 - total flux cleaned = -2.54632e-05 Jy ! Component: 3150 - total flux cleaned = 2.49993e-05 Jy ! Component: 3200 - total flux cleaned = 4.49216e-05 Jy ! Component: 3250 - total flux cleaned = 3.50823e-05 Jy ! Component: 3300 - total flux cleaned = 9.39438e-05 Jy ! Component: 3350 - total flux cleaned = 0.000123102 Jy ! Component: 3400 - total flux cleaned = 0.000161542 Jy ! Component: 3450 - total flux cleaned = 0.000180529 Jy ! Component: 3500 - total flux cleaned = 0.000218436 Jy ! Component: 3550 - total flux cleaned = 0.000246575 Jy ! Component: 3600 - total flux cleaned = 0.000283785 Jy ! Component: 3650 - total flux cleaned = 0.000338956 Jy ! Component: 3700 - total flux cleaned = 0.000393779 Jy ! Component: 3750 - total flux cleaned = 0.000421013 Jy ! Component: 3800 - total flux cleaned = 0.000439151 Jy ! Component: 3850 - total flux cleaned = 0.000474919 Jy ! Component: 3900 - total flux cleaned = 0.000510335 Jy ! Component: 3950 - total flux cleaned = 0.00058951 Jy ! Component: 4000 - total flux cleaned = 0.000589561 Jy ! Component: 4050 - total flux cleaned = 0.000650374 Jy ! Total flux subtracted in 4096 components = 0.000667641 Jy ! Clean residual min=-0.000596 max=0.000564 Jy/beam ! Clean residual mean=0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.110191 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 388 components and 0.110191 Jy ![Exited script file: muppet] wmap "J0210-0737_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.704 at -4.631 degrees (North through East) ! Clean map min=-0.0013306 max=0.077284 Jy/beam ! Writing clean map to FITS file: J0210-0737_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0772844 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151756 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.58908 0.58908 1.17816 2.35632 4.71264 9.42527 18.8505 37.7011 75.4022 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.913 x 7.704 at -4.631 degrees (North through East) ! Clean map min=-0.0013306 max=0.077284 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0210-0737_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:50:01 2019