! Started logfile: J0207-3857_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:35:21 2019 obs J0207-3857_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0207-3857_S_2017_05_31_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.788694 visibilities/baseline/integration-bin. ! Found source: J0207-3857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 8092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0207-3857_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936716Jy sigma=0.005366 ! Fit after self-cal, rms=0.899224Jy sigma=0.005221 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=6.687 mas, bpa=4.914 degrees ! Estimated noise=3178.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0802984 Jy ! Component: 100 - total flux cleaned = 0.0996352 Jy ! Total flux subtracted in 100 components = 0.0996352 Jy ! Clean residual min=-0.011768 max=0.011988 Jy/beam ! Clean residual mean=-0.000086 rms=0.003268 Jy/beam ! Combined flux in latest and established models = 0.0996352 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0996352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239653Jy sigma=0.000684 ! Fit after self-cal, rms=0.239564Jy sigma=0.000683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=8.1 mas, bpa=4.002 degrees ! Estimated noise=1638.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136126 Jy ! Component: 100 - total flux cleaned = 0.01978 Jy ! Component: 150 - total flux cleaned = 0.0228414 Jy ! Component: 200 - total flux cleaned = 0.0243679 Jy ! Total flux subtracted in 200 components = 0.0243679 Jy ! Clean residual min=-0.012093 max=0.012182 Jy/beam ! Clean residual mean=-0.000127 rms=0.002961 Jy/beam ! Combined flux in latest and established models = 0.124003 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.124003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237215Jy sigma=0.000679 ! Fit after self-cal, rms=0.237153Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.87 HN 1.00* KP 1.13 ! LA 0.97 MK 0.96 NL 1.42 OV 1.15 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.23 FD 0.95 HN 1.00* KP 1.13 ! LA 0.98 MK 0.98 NL 1.39 OV 1.07 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.33 FD 0.99 HN 1.00* KP 1.04 ! LA 1.02 MK 1.10 NL 1.53 OV 1.09 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.08 ! LA 0.78 MK 1.05 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.237153Jy sigma=0.000679 ! Fit after self-cal, rms=0.149239Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=8.087 mas, bpa=4.238 degrees ! Estimated noise=1638.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091945 Jy ! Component: 100 - total flux cleaned = 0.0134697 Jy ! Component: 150 - total flux cleaned = 0.0158098 Jy ! Component: 200 - total flux cleaned = 0.0163193 Jy ! Total flux subtracted in 200 components = 0.0163193 Jy ! Clean residual min=-0.004692 max=0.005168 Jy/beam ! Clean residual mean=0.000036 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.140322 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.140323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148668Jy sigma=0.000660 ! Fit after self-cal, rms=0.148328Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148328Jy sigma=0.000657 ! Fit after self-cal, rms=0.145208Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=8.056 mas, bpa=4.658 degrees ! Estimated noise=1620.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389143 Jy ! Component: 100 - total flux cleaned = 0.00571063 Jy ! Component: 150 - total flux cleaned = 0.00589005 Jy ! Component: 200 - total flux cleaned = 0.0058926 Jy ! Total flux subtracted in 200 components = 0.0058926 Jy ! Clean residual min=-0.004363 max=0.004860 Jy/beam ! Clean residual mean=0.000016 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.146215 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.146215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145086Jy sigma=0.000656 ! Fit after self-cal, rms=0.144970Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127491 Jy ! Component: 100 - total flux cleaned = 0.00143778 Jy ! Component: 150 - total flux cleaned = 0.00139215 Jy ! Component: 200 - total flux cleaned = 0.0013497 Jy ! Total flux subtracted in 200 components = 0.0013497 Jy ! Clean residual min=-0.004442 max=0.004788 Jy/beam ! Clean residual mean=0.000027 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.147565 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.147565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144927Jy sigma=0.000656 ! Fit after self-cal, rms=0.144910Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144910Jy sigma=0.000656 ! Fit after self-cal, rms=0.142548Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=8.035 mas, bpa=4.889 degrees ! Estimated noise=1611.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174419 Jy ! Component: 100 - total flux cleaned = 0.00189736 Jy ! Component: 150 - total flux cleaned = 0.00189794 Jy ! Component: 200 - total flux cleaned = 0.00185812 Jy ! Total flux subtracted in 200 components = 0.00185812 Jy ! Clean residual min=-0.004129 max=0.004688 Jy/beam ! Clean residual mean=0.000008 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.149423 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.149423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142508Jy sigma=0.000655 ! Fit after self-cal, rms=0.142454Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389381 Jy ! Component: 100 - total flux cleaned = 0.000390017 Jy ! Component: 150 - total flux cleaned = 0.000353914 Jy ! Component: 200 - total flux cleaned = 0.000320673 Jy ! Total flux subtracted in 200 components = 0.000320673 Jy ! Clean residual min=-0.004171 max=0.004589 Jy/beam ! Clean residual mean=0.000012 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.149744 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.149744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142430Jy sigma=0.000655 ! Fit after self-cal, rms=0.142422Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142422Jy sigma=0.000655 ! Fit after self-cal, rms=0.141364Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.165 mas, bmaj=29.05 mas, bpa=9.44 degrees ! Estimated noise=2116.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136326 Jy ! Component: 100 - total flux cleaned = 0.00136581 Jy ! Component: 150 - total flux cleaned = 0.00133119 Jy ! Component: 200 - total flux cleaned = 0.00129958 Jy ! Total flux subtracted in 200 components = 0.00129958 Jy ! Clean residual min=-0.004837 max=0.004995 Jy/beam ! Clean residual mean=0.000017 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.151043 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.151043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141356Jy sigma=0.000655 ! Fit after self-cal, rms=0.141339Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275894 Jy ! Component: 100 - total flux cleaned = 0.00024443 Jy ! Component: 150 - total flux cleaned = 0.00021389 Jy ! Component: 200 - total flux cleaned = 0.000187594 Jy ! Total flux subtracted in 200 components = 0.000187594 Jy ! Clean residual min=-0.004823 max=0.005046 Jy/beam ! Clean residual mean=0.000020 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.151231 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.151231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141336Jy sigma=0.000655 ! Fit after self-cal, rms=0.141337Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=8.022 mas, bpa=5.036 degrees ! Estimated noise=1607.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 8.022 at 5.036 degrees (North through East) ! Clean map min=-0.0038432 max=0.10568 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.201 mas, bmaj=6.633 mas, bpa=6.003 degrees ! Estimated noise=3133.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0780649 Jy ! Component: 100 - total flux cleaned = 0.097415 Jy ! Component: 150 - total flux cleaned = 0.108772 Jy ! Component: 200 - total flux cleaned = 0.117365 Jy ! Total flux subtracted in 200 components = 0.117365 Jy ! Clean residual min=-0.009527 max=0.007877 Jy/beam ! Clean residual mean=-0.000063 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.117365 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.117365 Jy ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=8.022 mas, bpa=5.036 degrees ! Estimated noise=1607.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114425 Jy ! Component: 100 - total flux cleaned = 0.018461 Jy ! Component: 150 - total flux cleaned = 0.0233006 Jy ! Component: 200 - total flux cleaned = 0.0267225 Jy ! Total flux subtracted in 200 components = 0.0267225 Jy ! Clean residual min=-0.004395 max=0.004023 Jy/beam ! Clean residual mean=-0.000031 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.144088 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.144088 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.165 mas, bmaj=29.05 mas, bpa=9.44 degrees ! Estimated noise=2116.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037353 Jy ! Component: 100 - total flux cleaned = 0.00507505 Jy ! Component: 150 - total flux cleaned = 0.00551952 Jy ! Component: 200 - total flux cleaned = 0.00577644 Jy ! Total flux subtracted in 200 components = 0.00577644 Jy ! Clean residual min=-0.004923 max=0.004895 Jy/beam ! Clean residual mean=0.000003 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.149864 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180293 Jy ! Component: 100 - total flux cleaned = 0.000303605 Jy ! Component: 150 - total flux cleaned = 0.000415414 Jy ! Component: 200 - total flux cleaned = 0.000447979 Jy ! Total flux subtracted in 200 components = 0.000447979 Jy ! Clean residual min=-0.004891 max=0.004948 Jy/beam ! Clean residual mean=0.000008 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.150312 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 74 components and 0.150312 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=8.022 mas, bpa=5.036 degrees ! Estimated noise=1607.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.62919e-06 Jy ! Component: 100 - total flux cleaned = 0.000220293 Jy ! Component: 150 - total flux cleaned = 0.000456644 Jy ! Component: 200 - total flux cleaned = 0.000505257 Jy ! Total flux subtracted in 200 components = 0.000505257 Jy ! Clean residual min=-0.004139 max=0.004323 Jy/beam ! Clean residual mean=0.000008 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.150817 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.150818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141336Jy sigma=0.000655 ! Fit after self-cal, rms=0.141311Jy sigma=0.000655 wmodel J0207-3857_S_2017_05_31_pus_map.mod ! Writing 94 model components to file: J0207-3857_S_2017_05_31_pus_map.mod wobs J0207-3857_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0207-3857_S_2017_05_31_pus_uvs.fits wwins J0207-3857_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J0207-3857_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246646 Jy ! Component: 100 - total flux cleaned = -0.000904274 Jy ! Component: 150 - total flux cleaned = -0.00131755 Jy ! Component: 200 - total flux cleaned = -0.00169707 Jy ! Component: 250 - total flux cleaned = -0.00200214 Jy ! Component: 300 - total flux cleaned = -0.00233721 Jy ! Component: 350 - total flux cleaned = -0.00256588 Jy ! Component: 400 - total flux cleaned = -0.00283037 Jy ! Component: 450 - total flux cleaned = -0.00299884 Jy ! Component: 500 - total flux cleaned = -0.00304024 Jy ! Component: 550 - total flux cleaned = -0.00308067 Jy ! Component: 600 - total flux cleaned = -0.00308074 Jy ! Component: 650 - total flux cleaned = -0.00319118 Jy ! Component: 700 - total flux cleaned = -0.00326273 Jy ! Component: 750 - total flux cleaned = -0.00333292 Jy ! Component: 800 - total flux cleaned = -0.00336681 Jy ! Component: 850 - total flux cleaned = -0.00343354 Jy ! Component: 900 - total flux cleaned = -0.00340057 Jy ! Component: 950 - total flux cleaned = -0.00320666 Jy ! Component: 1000 - total flux cleaned = -0.00308043 Jy ! Component: 1050 - total flux cleaned = -0.00289449 Jy ! Component: 1100 - total flux cleaned = -0.00280289 Jy ! Component: 1150 - total flux cleaned = -0.00268354 Jy ! Component: 1200 - total flux cleaned = -0.00256632 Jy ! Component: 1250 - total flux cleaned = -0.00245145 Jy ! Component: 1300 - total flux cleaned = -0.00233846 Jy ! Component: 1350 - total flux cleaned = -0.00231142 Jy ! Component: 1400 - total flux cleaned = -0.00233894 Jy ! Component: 1450 - total flux cleaned = -0.00225779 Jy ! Component: 1500 - total flux cleaned = -0.00220502 Jy ! Component: 1550 - total flux cleaned = -0.00223184 Jy ! Component: 1600 - total flux cleaned = -0.00223221 Jy ! Component: 1650 - total flux cleaned = -0.00218115 Jy ! Component: 1700 - total flux cleaned = -0.00213072 Jy ! Component: 1750 - total flux cleaned = -0.00213099 Jy ! Component: 1800 - total flux cleaned = -0.0020817 Jy ! Component: 1850 - total flux cleaned = -0.00213052 Jy ! Component: 1900 - total flux cleaned = -0.00205742 Jy ! Component: 1950 - total flux cleaned = -0.00200937 Jy ! Component: 2000 - total flux cleaned = -0.00196177 Jy ! Component: 2050 - total flux cleaned = -0.00196177 Jy ! Component: 2100 - total flux cleaned = -0.0019381 Jy ! Component: 2150 - total flux cleaned = -0.0018916 Jy ! Component: 2200 - total flux cleaned = -0.00191488 Jy ! Component: 2250 - total flux cleaned = -0.00184577 Jy ! Component: 2300 - total flux cleaned = -0.00177706 Jy ! Component: 2350 - total flux cleaned = -0.00175411 Jy ! Component: 2400 - total flux cleaned = -0.00170879 Jy ! Component: 2450 - total flux cleaned = -0.00166379 Jy ! Component: 2500 - total flux cleaned = -0.0015521 Jy ! Component: 2550 - total flux cleaned = -0.00148551 Jy ! Component: 2600 - total flux cleaned = -0.00139715 Jy ! Component: 2650 - total flux cleaned = -0.00137517 Jy ! Component: 2700 - total flux cleaned = -0.00130942 Jy ! Component: 2750 - total flux cleaned = -0.00130944 Jy ! Component: 2800 - total flux cleaned = -0.0013312 Jy ! Component: 2850 - total flux cleaned = -0.00135283 Jy ! Component: 2900 - total flux cleaned = -0.00133111 Jy ! Component: 2950 - total flux cleaned = -0.00133108 Jy ! Component: 3000 - total flux cleaned = -0.00130959 Jy ! Component: 3050 - total flux cleaned = -0.00133108 Jy ! Component: 3100 - total flux cleaned = -0.00133104 Jy ! Component: 3150 - total flux cleaned = -0.0013741 Jy ! Component: 3200 - total flux cleaned = -0.0014172 Jy ! Component: 3250 - total flux cleaned = -0.00145998 Jy ! Component: 3300 - total flux cleaned = -0.00146004 Jy ! Component: 3350 - total flux cleaned = -0.00154593 Jy ! Component: 3400 - total flux cleaned = -0.0015459 Jy ! Component: 3450 - total flux cleaned = -0.00158881 Jy ! Component: 3500 - total flux cleaned = -0.00163173 Jy ! Component: 3550 - total flux cleaned = -0.00165309 Jy ! Component: 3600 - total flux cleaned = -0.00173906 Jy ! Component: 3650 - total flux cleaned = -0.00171743 Jy ! Component: 3700 - total flux cleaned = -0.00178188 Jy ! Component: 3750 - total flux cleaned = -0.00184643 Jy ! Component: 3800 - total flux cleaned = -0.00186788 Jy ! Component: 3850 - total flux cleaned = -0.00191089 Jy ! Component: 3900 - total flux cleaned = -0.00193245 Jy ! Component: 3950 - total flux cleaned = -0.00193262 Jy ! Component: 4000 - total flux cleaned = -0.00199758 Jy ! Component: 4050 - total flux cleaned = -0.00204094 Jy ! Total flux subtracted in 4096 components = -0.00204085 Jy ! Clean residual min=-0.001255 max=0.001329 Jy/beam ! Clean residual mean=0.000009 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.148777 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 314 components and 0.148777 Jy ![Exited script file: muppet] wmap "J0207-3857_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 8.022 at 5.036 degrees (North through East) ! Clean map min=-0.0026703 max=0.10398 Jy/beam ! Writing clean map to FITS file: J0207-3857_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103981 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00037839 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09171 1.09171 2.18341 4.36683 8.73366 17.4673 34.9346 69.8692 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 8.022 at 5.036 degrees (North through East) ! Clean map min=-0.0026703 max=0.10398 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0207-3857_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:35:30 2019