! Started logfile: J0207-2402_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:47 2019 obs J0207-2402_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0207-2402_S_2017_08_12_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779649 visibilities/baseline/integration-bin. ! Found source: J0207-2402 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0207-2402_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 683 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942940Jy sigma=0.006636 ! Fit after self-cal, rms=0.921254Jy sigma=0.006502 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.409 mas, bmaj=6.911 mas, bpa=-7.346 degrees ! Estimated noise=1578.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.063318 Jy ! Component: 100 - total flux cleaned = 0.0808526 Jy ! Total flux subtracted in 100 components = 0.0808526 Jy ! Clean residual min=-0.004822 max=0.007541 Jy/beam ! Clean residual mean=0.000026 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.0808526 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0808526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102553Jy sigma=0.000674 ! Fit after self-cal, rms=0.102398Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=7.393 mas, bpa=-6.257 degrees ! Estimated noise=1087.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104051 Jy ! Component: 100 - total flux cleaned = 0.0159903 Jy ! Component: 150 - total flux cleaned = 0.0193442 Jy ! Component: 200 - total flux cleaned = 0.0214258 Jy ! Total flux subtracted in 200 components = 0.0214258 Jy ! Clean residual min=-0.003363 max=0.003250 Jy/beam ! Clean residual mean=0.000007 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.102278 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 51 components and 0.102278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101412Jy sigma=0.000665 ! Fit after self-cal, rms=0.101417Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.06 KP 1.02 ! LA 1.00 MK 1.10 NL 0.90 OV 0.97 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.11 KP 0.99 ! LA 0.92 MK 1.02 NL 1.02 OV 1.04 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 0.95 ! LA 0.98 MK 1.04 NL 0.97 OV 0.94 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! A total of 267 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.101417Jy sigma=0.000664 ! Fit after self-cal, rms=0.103254Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=7.474 mas, bpa=-5.121 degrees ! Estimated noise=1102.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612004 Jy ! Component: 100 - total flux cleaned = 0.000636855 Jy ! Component: 150 - total flux cleaned = 0.00063574 Jy ! Component: 200 - total flux cleaned = 0.00063568 Jy ! Total flux subtracted in 200 components = 0.00063568 Jy ! Clean residual min=-0.003063 max=0.003086 Jy/beam ! Clean residual mean=0.000013 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.102914 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.102914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103242Jy sigma=0.000668 ! Fit after self-cal, rms=0.103295Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103295Jy sigma=0.000668 ! Fit after self-cal, rms=0.104420Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.473 mas, bpa=-5.067 degrees ! Estimated noise=1107.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795585 Jy ! Component: 100 - total flux cleaned = 0.000816985 Jy ! Component: 150 - total flux cleaned = 0.000853792 Jy ! Component: 200 - total flux cleaned = 0.000853887 Jy ! Total flux subtracted in 200 components = 0.000853887 Jy ! Clean residual min=-0.002593 max=0.003011 Jy/beam ! Clean residual mean=0.000018 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.103768 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.103768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104411Jy sigma=0.000667 ! Fit after self-cal, rms=0.104460Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.55648e-06 Jy ! Component: 100 - total flux cleaned = -3.28632e-06 Jy ! Component: 150 - total flux cleaned = 1.15042e-05 Jy ! Component: 200 - total flux cleaned = 1.16768e-05 Jy ! Total flux subtracted in 200 components = 1.16768e-05 Jy ! Clean residual min=-0.002633 max=0.003014 Jy/beam ! Clean residual mean=0.000018 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.10378 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.10378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104455Jy sigma=0.000667 ! Fit after self-cal, rms=0.104457Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104457Jy sigma=0.000667 ! Fit after self-cal, rms=0.104984Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.462 mas, bpa=-5.026 degrees ! Estimated noise=1105.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261822 Jy ! Component: 100 - total flux cleaned = 0.000307168 Jy ! Component: 150 - total flux cleaned = 0.000321021 Jy ! Component: 200 - total flux cleaned = 0.000345612 Jy ! Total flux subtracted in 200 components = 0.000345612 Jy ! Clean residual min=-0.002473 max=0.002992 Jy/beam ! Clean residual mean=0.000020 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.104125 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.104125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104980Jy sigma=0.000666 ! Fit after self-cal, rms=0.105016Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.89137e-05 Jy ! Component: 100 - total flux cleaned = -6.37208e-05 Jy ! Component: 150 - total flux cleaned = -5.24508e-05 Jy ! Component: 200 - total flux cleaned = -3.13565e-05 Jy ! Total flux subtracted in 200 components = -3.13565e-05 Jy ! Clean residual min=-0.002510 max=0.003003 Jy/beam ! Clean residual mean=0.000020 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.104094 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.104094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105013Jy sigma=0.000666 ! Fit after self-cal, rms=0.105016Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105016Jy sigma=0.000666 ! Fit after self-cal, rms=0.105005Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.974 mas, bmaj=17.02 mas, bpa=-2.878 degrees ! Estimated noise=1478.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832226 Jy ! Component: 100 - total flux cleaned = 0.000964055 Jy ! Component: 150 - total flux cleaned = 0.00097456 Jy ! Component: 200 - total flux cleaned = 0.000984576 Jy ! Total flux subtracted in 200 components = 0.000984576 Jy ! Clean residual min=-0.003273 max=0.003345 Jy/beam ! Clean residual mean=0.000051 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.105078 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.105078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105004Jy sigma=0.000666 ! Fit after self-cal, rms=0.105009Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.04756e-05 Jy ! Component: 100 - total flux cleaned = 4.92275e-05 Jy ! Component: 150 - total flux cleaned = 4.85079e-05 Jy ! Component: 200 - total flux cleaned = 4.89926e-05 Jy ! Total flux subtracted in 200 components = 4.89926e-05 Jy ! Clean residual min=-0.003283 max=0.003350 Jy/beam ! Clean residual mean=0.000051 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.105127 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 74 components and 0.105127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105009Jy sigma=0.000666 ! Fit after self-cal, rms=0.105008Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=7.451 mas, bpa=-4.997 degrees ! Estimated noise=1103.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 7.451 at -4.997 degrees (North through East) ! Clean map min=-0.002383 max=0.081521 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.9 mas, bpa=-6.421 degrees ! Estimated noise=1626.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632679 Jy ! Component: 100 - total flux cleaned = 0.082056 Jy ! Component: 150 - total flux cleaned = 0.091179 Jy ! Component: 200 - total flux cleaned = 0.0963104 Jy ! Total flux subtracted in 200 components = 0.0963104 Jy ! Clean residual min=-0.003507 max=0.003914 Jy/beam ! Clean residual mean=0.000031 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.0963103 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0963103 Jy ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=7.451 mas, bpa=-4.997 degrees ! Estimated noise=1103.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408463 Jy ! Component: 100 - total flux cleaned = 0.0064234 Jy ! Component: 150 - total flux cleaned = 0.00799983 Jy ! Component: 200 - total flux cleaned = 0.00852307 Jy ! Total flux subtracted in 200 components = 0.00852307 Jy ! Clean residual min=-0.002547 max=0.002808 Jy/beam ! Clean residual mean=0.000022 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.104833 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.104833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.974 mas, bmaj=17.02 mas, bpa=-2.878 degrees ! Estimated noise=1478.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844703 Jy ! Component: 100 - total flux cleaned = 0.00088352 Jy ! Component: 150 - total flux cleaned = 0.000883784 Jy ! Component: 200 - total flux cleaned = 0.000883324 Jy ! Total flux subtracted in 200 components = 0.000883324 Jy ! Clean residual min=-0.003046 max=0.003343 Jy/beam ! Clean residual mean=0.000054 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.105717 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.8194e-08 Jy ! Component: 100 - total flux cleaned = 1.66218e-06 Jy ! Component: 150 - total flux cleaned = 2.49281e-05 Jy ! Component: 200 - total flux cleaned = 2.5237e-05 Jy ! Total flux subtracted in 200 components = 2.5237e-05 Jy ! Clean residual min=-0.003065 max=0.003303 Jy/beam ! Clean residual mean=0.000053 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.105742 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.105742 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=7.451 mas, bpa=-4.997 degrees ! Estimated noise=1103.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.83681e-05 Jy ! Component: 100 - total flux cleaned = -5.68765e-05 Jy ! Component: 150 - total flux cleaned = -5.38045e-05 Jy ! Component: 200 - total flux cleaned = -9.46082e-05 Jy ! Total flux subtracted in 200 components = -9.46082e-05 Jy ! Clean residual min=-0.002408 max=0.002808 Jy/beam ! Clean residual mean=0.000021 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.105647 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 0.105647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104946Jy sigma=0.000666 ! Fit after self-cal, rms=0.104955Jy sigma=0.000666 wmodel J0207-2402_S_2017_08_12_pus_map.mod ! Writing 93 model components to file: J0207-2402_S_2017_08_12_pus_map.mod wobs J0207-2402_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0207-2402_S_2017_08_12_pus_uvs.fits wwins J0207-2402_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0207-2402_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978992 Jy ! Component: 100 - total flux cleaned = 0.00180317 Jy ! Component: 150 - total flux cleaned = 0.00236472 Jy ! Component: 200 - total flux cleaned = 0.00248754 Jy ! Component: 250 - total flux cleaned = 0.00256839 Jy ! Component: 300 - total flux cleaned = 0.00275988 Jy ! Component: 350 - total flux cleaned = 0.00290833 Jy ! Component: 400 - total flux cleaned = 0.00316091 Jy ! Component: 450 - total flux cleaned = 0.00330109 Jy ! Component: 500 - total flux cleaned = 0.00347134 Jy ! Component: 550 - total flux cleaned = 0.00360377 Jy ! Component: 600 - total flux cleaned = 0.00373386 Jy ! Component: 650 - total flux cleaned = 0.003861 Jy ! Component: 700 - total flux cleaned = 0.00404732 Jy ! Component: 750 - total flux cleaned = 0.00416865 Jy ! Component: 800 - total flux cleaned = 0.00428769 Jy ! Component: 850 - total flux cleaned = 0.00443382 Jy ! Component: 900 - total flux cleaned = 0.00460569 Jy ! Component: 950 - total flux cleaned = 0.00466207 Jy ! Component: 1000 - total flux cleaned = 0.00474506 Jy ! Component: 1050 - total flux cleaned = 0.00479906 Jy ! Component: 1100 - total flux cleaned = 0.00485258 Jy ! Component: 1150 - total flux cleaned = 0.00482642 Jy ! Component: 1200 - total flux cleaned = 0.00487865 Jy ! Component: 1250 - total flux cleaned = 0.00490435 Jy ! Component: 1300 - total flux cleaned = 0.00495447 Jy ! Component: 1350 - total flux cleaned = 0.00497951 Jy ! Component: 1400 - total flux cleaned = 0.00500388 Jy ! Component: 1450 - total flux cleaned = 0.00505197 Jy ! Component: 1500 - total flux cleaned = 0.00507572 Jy ! Component: 1550 - total flux cleaned = 0.00509911 Jy ! Component: 1600 - total flux cleaned = 0.00514575 Jy ! Component: 1650 - total flux cleaned = 0.00528324 Jy ! Component: 1700 - total flux cleaned = 0.00528297 Jy ! Component: 1750 - total flux cleaned = 0.00539524 Jy ! Component: 1800 - total flux cleaned = 0.00550603 Jy ! Component: 1850 - total flux cleaned = 0.00565879 Jy ! Component: 1900 - total flux cleaned = 0.0057015 Jy ! Component: 1950 - total flux cleaned = 0.0057225 Jy ! Component: 2000 - total flux cleaned = 0.00582793 Jy ! Component: 2050 - total flux cleaned = 0.0058695 Jy ! Component: 2100 - total flux cleaned = 0.00591115 Jy ! Component: 2150 - total flux cleaned = 0.00599315 Jy ! Component: 2200 - total flux cleaned = 0.00609443 Jy ! Component: 2250 - total flux cleaned = 0.00611458 Jy ! Component: 2300 - total flux cleaned = 0.00623357 Jy ! Component: 2350 - total flux cleaned = 0.00627274 Jy ! Component: 2400 - total flux cleaned = 0.00627258 Jy ! Component: 2450 - total flux cleaned = 0.00631132 Jy ! Component: 2500 - total flux cleaned = 0.00640711 Jy ! Component: 2550 - total flux cleaned = 0.0064642 Jy ! Component: 2600 - total flux cleaned = 0.00659566 Jy ! Component: 2650 - total flux cleaned = 0.00655829 Jy ! Component: 2700 - total flux cleaned = 0.00665065 Jy ! Component: 2750 - total flux cleaned = 0.0067056 Jy ! Component: 2800 - total flux cleaned = 0.00677821 Jy ! Component: 2850 - total flux cleaned = 0.00679622 Jy ! Component: 2900 - total flux cleaned = 0.00692126 Jy ! Component: 2950 - total flux cleaned = 0.00695674 Jy ! Component: 3000 - total flux cleaned = 0.00700948 Jy ! Component: 3050 - total flux cleaned = 0.0070621 Jy ! Component: 3100 - total flux cleaned = 0.00711428 Jy ! Component: 3150 - total flux cleaned = 0.0071659 Jy ! Component: 3200 - total flux cleaned = 0.00718309 Jy ! Component: 3250 - total flux cleaned = 0.00725097 Jy ! Component: 3300 - total flux cleaned = 0.00730134 Jy ! Component: 3350 - total flux cleaned = 0.00736821 Jy ! Component: 3400 - total flux cleaned = 0.00740129 Jy ! Component: 3450 - total flux cleaned = 0.00746743 Jy ! Component: 3500 - total flux cleaned = 0.00746737 Jy ! Component: 3550 - total flux cleaned = 0.00746748 Jy ! Component: 3600 - total flux cleaned = 0.00754843 Jy ! Component: 3650 - total flux cleaned = 0.00756435 Jy ! Component: 3700 - total flux cleaned = 0.00759638 Jy ! Component: 3750 - total flux cleaned = 0.00764409 Jy ! Component: 3800 - total flux cleaned = 0.00765973 Jy ! Component: 3850 - total flux cleaned = 0.00765962 Jy ! Component: 3900 - total flux cleaned = 0.00762849 Jy ! Component: 3950 - total flux cleaned = 0.00764407 Jy ! Component: 4000 - total flux cleaned = 0.007675 Jy ! Component: 4050 - total flux cleaned = 0.00769039 Jy ! Total flux subtracted in 4096 components = 0.00769029 Jy ! Clean residual min=-0.000874 max=0.000930 Jy/beam ! Clean residual mean=0.000008 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.113338 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 404 components and 0.113338 Jy ![Exited script file: muppet] wmap "J0207-2402_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 7.451 at -4.997 degrees (North through East) ! Clean map min=-0.002586 max=0.081268 Jy/beam ! Writing clean map to FITS file: J0207-2402_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.081268 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283136 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0452 1.0452 2.09039 4.18078 8.36157 16.7231 33.4463 66.8925 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 7.451 at -4.997 degrees (North through East) ! Clean map min=-0.002586 max=0.081268 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0207-2402_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:51 2019