! Started logfile: J0206-2212_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:42 2019 obs J0206-2212_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0206-2212_S_2017_08_12_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.768056 visibilities/baseline/integration-bin. ! Found source: J0206-2212 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0206-2212_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 693 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.864873Jy sigma=0.006273 ! Fit after self-cal, rms=0.849066Jy sigma=0.006165 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=6.779 mas, bpa=-6.112 degrees ! Estimated noise=1509.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118979 Jy ! Component: 100 - total flux cleaned = 0.147469 Jy ! Total flux subtracted in 100 components = 0.147469 Jy ! Clean residual min=-0.008844 max=0.012503 Jy/beam ! Clean residual mean=-0.000024 rms=0.002250 Jy/beam ! Combined flux in latest and established models = 0.147469 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.147469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100570Jy sigma=0.000693 ! Fit after self-cal, rms=0.100541Jy sigma=0.000693 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.41 mas, bpa=-6.148 degrees ! Estimated noise=1050.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185618 Jy ! Component: 100 - total flux cleaned = 0.0282762 Jy ! Component: 150 - total flux cleaned = 0.0336538 Jy ! Component: 200 - total flux cleaned = 0.0368416 Jy ! Total flux subtracted in 200 components = 0.0368416 Jy ! Clean residual min=-0.004891 max=0.004992 Jy/beam ! Clean residual mean=-0.000017 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.184311 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 0.184311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097523Jy sigma=0.000666 ! Fit after self-cal, rms=0.097524Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* HN 1.06 KP 1.04 ! LA 0.98 MK 1.04 NL 0.89 OV 0.98 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.09 KP 1.00 ! LA 0.95 MK 1.02 NL 1.04 OV 1.00 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.09 KP 0.98 ! LA 0.98 MK 1.04 NL 0.95 OV 0.94 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 267 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.097524Jy sigma=0.000665 ! Fit after self-cal, rms=0.098373Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.442 mas, bpa=-4.877 degrees ! Estimated noise=1057.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116412 Jy ! Component: 100 - total flux cleaned = 3.62194e-05 Jy ! Component: 150 - total flux cleaned = -3.30357e-05 Jy ! Component: 200 - total flux cleaned = -0.000117866 Jy ! Total flux subtracted in 200 components = -0.000117866 Jy ! Clean residual min=-0.004047 max=0.003659 Jy/beam ! Clean residual mean=-0.000010 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.184193 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.184193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098339Jy sigma=0.000662 ! Fit after self-cal, rms=0.098424Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098424Jy sigma=0.000662 ! Fit after self-cal, rms=0.099690Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.415 mas, bpa=-4.865 degrees ! Estimated noise=1060.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00079056 Jy ! Component: 100 - total flux cleaned = 0.000770266 Jy ! Component: 150 - total flux cleaned = 0.000749176 Jy ! Component: 200 - total flux cleaned = 0.000768678 Jy ! Total flux subtracted in 200 components = 0.000768678 Jy ! Clean residual min=-0.003424 max=0.002549 Jy/beam ! Clean residual mean=-0.000003 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.184962 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.184962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099675Jy sigma=0.000658 ! Fit after self-cal, rms=0.099704Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.09627e-05 Jy ! Component: 100 - total flux cleaned = -6.11497e-05 Jy ! Component: 150 - total flux cleaned = -2.55031e-05 Jy ! Component: 200 - total flux cleaned = 9.03628e-06 Jy ! Total flux subtracted in 200 components = 9.03628e-06 Jy ! Clean residual min=-0.003410 max=0.002545 Jy/beam ! Clean residual mean=-0.000003 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.184971 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.184971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099696Jy sigma=0.000658 ! Fit after self-cal, rms=0.099694Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099694Jy sigma=0.000658 ! Fit after self-cal, rms=0.100692Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.385 mas, bpa=-4.872 degrees ! Estimated noise=1057.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418887 Jy ! Component: 100 - total flux cleaned = 0.000287499 Jy ! Component: 150 - total flux cleaned = 0.000249735 Jy ! Component: 200 - total flux cleaned = 0.000250224 Jy ! Total flux subtracted in 200 components = 0.000250224 Jy ! Clean residual min=-0.003426 max=0.002356 Jy/beam ! Clean residual mean=-0.000001 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.185221 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.185221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100682Jy sigma=0.000657 ! Fit after self-cal, rms=0.100691Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59643e-06 Jy ! Component: 100 - total flux cleaned = -9.41892e-06 Jy ! Component: 150 - total flux cleaned = 4.9144e-06 Jy ! Component: 200 - total flux cleaned = 1.9001e-05 Jy ! Total flux subtracted in 200 components = 1.9001e-05 Jy ! Clean residual min=-0.003420 max=0.002374 Jy/beam ! Clean residual mean=-0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.18524 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.18524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100686Jy sigma=0.000657 ! Fit after self-cal, rms=0.100685Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100685Jy sigma=0.000657 ! Fit after self-cal, rms=0.100595Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.883 mas, bmaj=16.55 mas, bpa=-3.383 degrees ! Estimated noise=1432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403049 Jy ! Component: 100 - total flux cleaned = 0.000383782 Jy ! Component: 150 - total flux cleaned = 0.000383221 Jy ! Component: 200 - total flux cleaned = 0.000370297 Jy ! Total flux subtracted in 200 components = 0.000370297 Jy ! Clean residual min=-0.003013 max=0.002958 Jy/beam ! Clean residual mean=0.000000 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.18561 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.18561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100596Jy sigma=0.000657 ! Fit after self-cal, rms=0.100592Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93727e-05 Jy ! Component: 100 - total flux cleaned = -2.93792e-05 Jy ! Component: 150 - total flux cleaned = -2.72703e-05 Jy ! Component: 200 - total flux cleaned = -1.48297e-05 Jy ! Total flux subtracted in 200 components = -1.48297e-05 Jy ! Clean residual min=-0.002999 max=0.002967 Jy/beam ! Clean residual mean=0.000000 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.185595 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 67 components and 0.185595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100594Jy sigma=0.000657 ! Fit after self-cal, rms=0.100590Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.371 mas, bpa=-4.851 degrees ! Estimated noise=1056.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.371 at -4.851 degrees (North through East) ! Clean map min=-0.0031255 max=0.15127 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=6.696 mas, bpa=-5.228 degrees ! Estimated noise=1536.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118504 Jy ! Component: 100 - total flux cleaned = 0.148851 Jy ! Component: 150 - total flux cleaned = 0.163622 Jy ! Component: 200 - total flux cleaned = 0.172097 Jy ! Total flux subtracted in 200 components = 0.172097 Jy ! Clean residual min=-0.005174 max=0.005082 Jy/beam ! Clean residual mean=-0.000000 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.172097 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.172097 Jy ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.371 mas, bpa=-4.851 degrees ! Estimated noise=1056.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062466 Jy ! Component: 100 - total flux cleaned = 0.00923917 Jy ! Component: 150 - total flux cleaned = 0.0109064 Jy ! Component: 200 - total flux cleaned = 0.011914 Jy ! Total flux subtracted in 200 components = 0.011914 Jy ! Clean residual min=-0.003486 max=0.002428 Jy/beam ! Clean residual mean=-0.000001 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.184011 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.184011 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.883 mas, bmaj=16.55 mas, bpa=-3.383 degrees ! Estimated noise=1432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115459 Jy ! Component: 100 - total flux cleaned = 0.00130311 Jy ! Component: 150 - total flux cleaned = 0.00132685 Jy ! Component: 200 - total flux cleaned = 0.00134956 Jy ! Total flux subtracted in 200 components = 0.00134956 Jy ! Clean residual min=-0.003024 max=0.002997 Jy/beam ! Clean residual mean=0.000000 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.185361 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.06088e-05 Jy ! Component: 100 - total flux cleaned = 4.01333e-05 Jy ! Component: 150 - total flux cleaned = 6.66044e-05 Jy ! Component: 200 - total flux cleaned = 8.32444e-05 Jy ! Total flux subtracted in 200 components = 8.32444e-05 Jy ! Clean residual min=-0.002999 max=0.003032 Jy/beam ! Clean residual mean=0.000000 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.185444 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.185444 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.371 mas, bpa=-4.851 degrees ! Estimated noise=1056.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000442912 Jy ! Component: 100 - total flux cleaned = -0.000358886 Jy ! Component: 150 - total flux cleaned = -0.00028589 Jy ! Component: 200 - total flux cleaned = -0.000252064 Jy ! Total flux subtracted in 200 components = -0.000252064 Jy ! Clean residual min=-0.003386 max=0.002416 Jy/beam ! Clean residual mean=-0.000001 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.185192 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.185192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100604Jy sigma=0.000657 ! Fit after self-cal, rms=0.100599Jy sigma=0.000657 wmodel J0206-2212_S_2017_08_12_pus_map.mod ! Writing 52 model components to file: J0206-2212_S_2017_08_12_pus_map.mod wobs J0206-2212_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0206-2212_S_2017_08_12_pus_uvs.fits wwins J0206-2212_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0206-2212_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877882 Jy ! Component: 100 - total flux cleaned = -0.00114351 Jy ! Component: 150 - total flux cleaned = -0.00135114 Jy ! Component: 200 - total flux cleaned = -0.00146698 Jy ! Component: 250 - total flux cleaned = -0.00154178 Jy ! Component: 300 - total flux cleaned = -0.00168811 Jy ! Component: 350 - total flux cleaned = -0.00175903 Jy ! Component: 400 - total flux cleaned = -0.00186377 Jy ! Component: 450 - total flux cleaned = -0.00209995 Jy ! Component: 500 - total flux cleaned = -0.00236249 Jy ! Component: 550 - total flux cleaned = -0.00252258 Jy ! Component: 600 - total flux cleaned = -0.00267977 Jy ! Component: 650 - total flux cleaned = -0.00280288 Jy ! Component: 700 - total flux cleaned = -0.00286334 Jy ! Component: 750 - total flux cleaned = -0.00298211 Jy ! Component: 800 - total flux cleaned = -0.00312753 Jy ! Component: 850 - total flux cleaned = -0.00326983 Jy ! Component: 900 - total flux cleaned = -0.00338156 Jy ! Component: 950 - total flux cleaned = -0.00349078 Jy ! Component: 1000 - total flux cleaned = -0.00354466 Jy ! Component: 1050 - total flux cleaned = -0.00362409 Jy ! Component: 1100 - total flux cleaned = -0.00367619 Jy ! Component: 1150 - total flux cleaned = -0.00367645 Jy ! Component: 1200 - total flux cleaned = -0.00375219 Jy ! Component: 1250 - total flux cleaned = -0.00375207 Jy ! Component: 1300 - total flux cleaned = -0.00380098 Jy ! Component: 1350 - total flux cleaned = -0.00377669 Jy ! Component: 1400 - total flux cleaned = -0.00384795 Jy ! Component: 1450 - total flux cleaned = -0.00375409 Jy ! Component: 1500 - total flux cleaned = -0.00377697 Jy ! Component: 1550 - total flux cleaned = -0.00375346 Jy ! Component: 1600 - total flux cleaned = -0.00373108 Jy ! Component: 1650 - total flux cleaned = -0.00370872 Jy ! Component: 1700 - total flux cleaned = -0.00368692 Jy ! Component: 1750 - total flux cleaned = -0.00362193 Jy ! Component: 1800 - total flux cleaned = -0.00364385 Jy ! Component: 1850 - total flux cleaned = -0.00364388 Jy ! Component: 1900 - total flux cleaned = -0.00368586 Jy ! Component: 1950 - total flux cleaned = -0.00370653 Jy ! Component: 2000 - total flux cleaned = -0.003768 Jy ! Component: 2050 - total flux cleaned = -0.00376817 Jy ! Component: 2100 - total flux cleaned = -0.0037683 Jy ! Component: 2150 - total flux cleaned = -0.00382774 Jy ! Component: 2200 - total flux cleaned = -0.0038274 Jy ! Component: 2250 - total flux cleaned = -0.00380793 Jy ! Component: 2300 - total flux cleaned = -0.00384662 Jy ! Component: 2350 - total flux cleaned = -0.00378936 Jy ! Component: 2400 - total flux cleaned = -0.00384618 Jy ! Component: 2450 - total flux cleaned = -0.00382741 Jy ! Component: 2500 - total flux cleaned = -0.00382757 Jy ! Component: 2550 - total flux cleaned = -0.00386439 Jy ! Component: 2600 - total flux cleaned = -0.00384616 Jy ! Component: 2650 - total flux cleaned = -0.00384632 Jy ! Component: 2700 - total flux cleaned = -0.00395383 Jy ! Component: 2750 - total flux cleaned = -0.00395373 Jy ! Component: 2800 - total flux cleaned = -0.00398906 Jy ! Component: 2850 - total flux cleaned = -0.00400652 Jy ! Component: 2900 - total flux cleaned = -0.00400651 Jy ! Component: 2950 - total flux cleaned = -0.00405834 Jy ! Component: 3000 - total flux cleaned = -0.00410953 Jy ! Component: 3050 - total flux cleaned = -0.00417743 Jy ! Component: 3100 - total flux cleaned = -0.00424464 Jy ! Component: 3150 - total flux cleaned = -0.00426136 Jy ! Component: 3200 - total flux cleaned = -0.00429436 Jy ! Component: 3250 - total flux cleaned = -0.00437689 Jy ! Component: 3300 - total flux cleaned = -0.00442582 Jy ! Component: 3350 - total flux cleaned = -0.00449075 Jy ! Component: 3400 - total flux cleaned = -0.00449061 Jy ! Component: 3450 - total flux cleaned = -0.00449057 Jy ! Component: 3500 - total flux cleaned = -0.00452228 Jy ! Component: 3550 - total flux cleaned = -0.00452234 Jy ! Component: 3600 - total flux cleaned = -0.00461654 Jy ! Component: 3650 - total flux cleaned = -0.00466326 Jy ! Component: 3700 - total flux cleaned = -0.00469421 Jy ! Component: 3750 - total flux cleaned = -0.00470963 Jy ! Component: 3800 - total flux cleaned = -0.00477096 Jy ! Component: 3850 - total flux cleaned = -0.00486226 Jy ! Component: 3900 - total flux cleaned = -0.00492285 Jy ! Component: 3950 - total flux cleaned = -0.00490784 Jy ! Component: 4000 - total flux cleaned = -0.00501274 Jy ! Component: 4050 - total flux cleaned = -0.00507229 Jy ! Total flux subtracted in 4096 components = -0.00511672 Jy ! Clean residual min=-0.000903 max=0.000896 Jy/beam ! Clean residual mean=-0.000003 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.180075 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 327 components and 0.180075 Jy ![Exited script file: muppet] wmap "J0206-2212_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.371 at -4.851 degrees (North through East) ! Clean map min=-0.0023833 max=0.15143 Jy/beam ! Writing clean map to FITS file: J0206-2212_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.151428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253644 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.502505 0.502505 1.00501 2.01002 4.02004 8.04008 16.0802 32.1603 64.3207 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.151 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.371 at -4.851 degrees (North through East) ! Clean map min=-0.0023833 max=0.15143 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0206-2212_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:47 2019