! Started logfile: J0206-1150_S_2017_06_10_pus_uvs.log on Mon May 6 14:42:38 2019 obs J0206-1150_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0206-1150_S_2017_06_10_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.770667 visibilities/baseline/integration-bin. ! Found source: J0206-1150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 10404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0206-1150_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 429 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.881529Jy sigma=0.007777 ! Fit after self-cal, rms=0.865352Jy sigma=0.007634 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=7.252 mas, bpa=-5.943 degrees ! Estimated noise=1221.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105621 Jy ! Component: 100 - total flux cleaned = 0.129307 Jy ! Total flux subtracted in 100 components = 0.129307 Jy ! Clean residual min=-0.005962 max=0.008491 Jy/beam ! Clean residual mean=0.000010 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.129307 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.129307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081190Jy sigma=0.000696 ! Fit after self-cal, rms=0.081193Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=8.193 mas, bpa=-5.929 degrees ! Estimated noise=882.219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115794 Jy ! Component: 100 - total flux cleaned = 0.0171483 Jy ! Component: 150 - total flux cleaned = 0.0199591 Jy ! Component: 200 - total flux cleaned = 0.0214054 Jy ! Total flux subtracted in 200 components = 0.0214054 Jy ! Clean residual min=-0.003759 max=0.003456 Jy/beam ! Clean residual mean=0.000004 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.150713 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 38 components and 0.150713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079628Jy sigma=0.000683 ! Fit after self-cal, rms=0.079644Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.96 KP 1.03 ! LA 1.05 MK 1.03 NL 0.87 OV 1.07 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00 KP 0.99 ! LA 0.99 MK 1.03 NL 1.04 OV 1.07 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.98 KP 0.98 ! LA 0.99 MK 1.02 NL 1.00 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.96 KP 1.00* ! LA 0.83 MK 1.23 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.079644Jy sigma=0.000683 ! Fit after self-cal, rms=0.078857Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=8.224 mas, bpa=-5.711 degrees ! Estimated noise=882.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000606198 Jy ! Component: 100 - total flux cleaned = -0.000684332 Jy ! Component: 150 - total flux cleaned = -0.000732639 Jy ! Component: 200 - total flux cleaned = -0.000755889 Jy ! Total flux subtracted in 200 components = -0.000755889 Jy ! Clean residual min=-0.002993 max=0.003177 Jy/beam ! Clean residual mean=0.000007 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.149957 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.149957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078839Jy sigma=0.000678 ! Fit after self-cal, rms=0.078840Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078840Jy sigma=0.000678 ! Fit after self-cal, rms=0.079082Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=8.243 mas, bpa=-5.844 degrees ! Estimated noise=882.903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79671e-05 Jy ! Component: 100 - total flux cleaned = 5.28445e-05 Jy ! Component: 150 - total flux cleaned = 9.80874e-05 Jy ! Component: 200 - total flux cleaned = 0.000138034 Jy ! Total flux subtracted in 200 components = 0.000138034 Jy ! Clean residual min=-0.001952 max=0.002098 Jy/beam ! Clean residual mean=0.000005 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.150095 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.150095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079075Jy sigma=0.000674 ! Fit after self-cal, rms=0.079084Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.26793e-05 Jy ! Component: 100 - total flux cleaned = -3.30016e-05 Jy ! Component: 150 - total flux cleaned = -9.32177e-06 Jy ! Component: 200 - total flux cleaned = 1.1449e-05 Jy ! Total flux subtracted in 200 components = 1.1449e-05 Jy ! Clean residual min=-0.001895 max=0.002063 Jy/beam ! Clean residual mean=0.000005 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.150106 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.150106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079080Jy sigma=0.000674 ! Fit after self-cal, rms=0.079079Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079079Jy sigma=0.000674 ! Fit after self-cal, rms=0.079204Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=8.245 mas, bpa=-5.857 degrees ! Estimated noise=883.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29391e-06 Jy ! Component: 100 - total flux cleaned = 6.56248e-06 Jy ! Component: 150 - total flux cleaned = 2.7192e-05 Jy ! Component: 200 - total flux cleaned = 5.49225e-05 Jy ! Total flux subtracted in 200 components = 5.49225e-05 Jy ! Clean residual min=-0.001873 max=0.002075 Jy/beam ! Clean residual mean=0.000005 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.150161 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.150161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079201Jy sigma=0.000674 ! Fit after self-cal, rms=0.079201Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40058e-05 Jy ! Component: 100 - total flux cleaned = -4.62242e-06 Jy ! Component: 150 - total flux cleaned = 3.6261e-06 Jy ! Component: 200 - total flux cleaned = 3.69404e-06 Jy ! Total flux subtracted in 200 components = 3.69404e-06 Jy ! Clean residual min=-0.001848 max=0.002065 Jy/beam ! Clean residual mean=0.000005 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.150165 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.150165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079199Jy sigma=0.000674 ! Fit after self-cal, rms=0.079199Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079199Jy sigma=0.000674 ! Fit after self-cal, rms=0.079260Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.135 mas, bmaj=16.31 mas, bpa=-6.492 degrees ! Estimated noise=1154.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.58519e-05 Jy ! Component: 100 - total flux cleaned = -5.92302e-05 Jy ! Component: 150 - total flux cleaned = -5.97497e-05 Jy ! Component: 200 - total flux cleaned = -5.98951e-05 Jy ! Total flux subtracted in 200 components = -5.98951e-05 Jy ! Clean residual min=-0.001982 max=0.002217 Jy/beam ! Clean residual mean=0.000010 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.150105 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.150105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079260Jy sigma=0.000674 ! Fit after self-cal, rms=0.079260Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.90621e-07 Jy ! Component: 100 - total flux cleaned = 3.30035e-07 Jy ! Component: 150 - total flux cleaned = -2.90363e-07 Jy ! Component: 200 - total flux cleaned = -8.43414e-07 Jy ! Total flux subtracted in 200 components = -8.43414e-07 Jy ! Clean residual min=-0.001977 max=0.002215 Jy/beam ! Clean residual mean=0.000010 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.150104 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.150104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079260Jy sigma=0.000674 ! Fit after self-cal, rms=0.079260Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=8.245 mas, bpa=-5.854 degrees ! Estimated noise=884.113 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 8.245 at -5.854 degrees (North through East) ! Clean map min=-0.0017752 max=0.13753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=7.282 mas, bpa=-6.04 degrees ! Estimated noise=1219.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105357 Jy ! Component: 100 - total flux cleaned = 0.128559 Jy ! Component: 150 - total flux cleaned = 0.137209 Jy ! Component: 200 - total flux cleaned = 0.142297 Jy ! Total flux subtracted in 200 components = 0.142297 Jy ! Clean residual min=-0.003264 max=0.003511 Jy/beam ! Clean residual mean=0.000007 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.142297 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.142297 Jy ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=8.245 mas, bpa=-5.854 degrees ! Estimated noise=884.113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415076 Jy ! Component: 100 - total flux cleaned = 0.00611184 Jy ! Component: 150 - total flux cleaned = 0.00712533 Jy ! Component: 200 - total flux cleaned = 0.0076803 Jy ! Total flux subtracted in 200 components = 0.0076803 Jy ! Clean residual min=-0.001897 max=0.002053 Jy/beam ! Clean residual mean=0.000005 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.149977 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.149977 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.135 mas, bmaj=16.31 mas, bpa=-6.492 degrees ! Estimated noise=1154.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191638 Jy ! Component: 100 - total flux cleaned = 0.00019192 Jy ! Component: 150 - total flux cleaned = 0.000200986 Jy ! Component: 200 - total flux cleaned = 0.000214976 Jy ! Total flux subtracted in 200 components = 0.000214976 Jy ! Clean residual min=-0.001982 max=0.002229 Jy/beam ! Clean residual mean=0.000010 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.150192 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.71202e-06 Jy ! Component: 100 - total flux cleaned = 1.06744e-05 Jy ! Component: 150 - total flux cleaned = 1.5248e-05 Jy ! Component: 200 - total flux cleaned = 1.53003e-05 Jy ! Total flux subtracted in 200 components = 1.53003e-05 Jy ! Clean residual min=-0.001968 max=0.002224 Jy/beam ! Clean residual mean=0.000010 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.150208 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.150208 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=8.245 mas, bpa=-5.854 degrees ! Estimated noise=884.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.59905e-05 Jy ! Component: 100 - total flux cleaned = 0.000121609 Jy ! Component: 150 - total flux cleaned = 0.000132599 Jy ! Component: 200 - total flux cleaned = 0.000150938 Jy ! Total flux subtracted in 200 components = 0.000150938 Jy ! Clean residual min=-0.001891 max=0.002066 Jy/beam ! Clean residual mean=0.000005 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.150359 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.150359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079267Jy sigma=0.000674 ! Fit after self-cal, rms=0.079262Jy sigma=0.000674 wmodel J0206-1150_S_2017_06_10_pus_map.mod ! Writing 80 model components to file: J0206-1150_S_2017_06_10_pus_map.mod wobs J0206-1150_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0206-1150_S_2017_06_10_pus_uvs.fits wwins J0206-1150_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0206-1150_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609772 Jy ! Component: 100 - total flux cleaned = 0.000507696 Jy ! Component: 150 - total flux cleaned = 0.000538782 Jy ! Component: 200 - total flux cleaned = 0.000570206 Jy ! Component: 250 - total flux cleaned = 0.000691054 Jy ! Component: 300 - total flux cleaned = 0.000776916 Jy ! Component: 350 - total flux cleaned = 0.000832806 Jy ! Component: 400 - total flux cleaned = 0.000860642 Jy ! Component: 450 - total flux cleaned = 0.000913947 Jy ! Component: 500 - total flux cleaned = 0.000862126 Jy ! Component: 550 - total flux cleaned = 0.000938604 Jy ! Component: 600 - total flux cleaned = 0.00101302 Jy ! Component: 650 - total flux cleaned = 0.00103708 Jy ! Component: 700 - total flux cleaned = 0.00103773 Jy ! Component: 750 - total flux cleaned = 0.00101467 Jy ! Component: 800 - total flux cleaned = 0.000969698 Jy ! Component: 850 - total flux cleaned = 0.000969968 Jy ! Component: 900 - total flux cleaned = 0.000926298 Jy ! Component: 950 - total flux cleaned = 0.00084074 Jy ! Component: 1000 - total flux cleaned = 0.000861712 Jy ! Component: 1050 - total flux cleaned = 0.000841513 Jy ! Component: 1100 - total flux cleaned = 0.000881874 Jy ! Component: 1150 - total flux cleaned = 0.000842128 Jy ! Component: 1200 - total flux cleaned = 0.000822749 Jy ! Component: 1250 - total flux cleaned = 0.000841809 Jy ! Component: 1300 - total flux cleaned = 0.000747127 Jy ! Component: 1350 - total flux cleaned = 0.000802861 Jy ! Component: 1400 - total flux cleaned = 0.000802999 Jy ! Component: 1450 - total flux cleaned = 0.000838916 Jy ! Component: 1500 - total flux cleaned = 0.000856553 Jy ! Component: 1550 - total flux cleaned = 0.00082128 Jy ! Component: 1600 - total flux cleaned = 0.000856339 Jy ! Component: 1650 - total flux cleaned = 0.000822253 Jy ! Component: 1700 - total flux cleaned = 0.000737998 Jy ! Component: 1750 - total flux cleaned = 0.000804794 Jy ! Component: 1800 - total flux cleaned = 0.000640339 Jy ! Component: 1850 - total flux cleaned = 0.000624248 Jy ! Component: 1900 - total flux cleaned = 0.000528158 Jy ! Component: 1950 - total flux cleaned = 0.000448991 Jy ! Component: 2000 - total flux cleaned = 0.000339468 Jy ! Component: 2050 - total flux cleaned = 0.000262051 Jy ! Component: 2100 - total flux cleaned = 0.000170558 Jy ! Component: 2150 - total flux cleaned = 9.50476e-05 Jy ! Component: 2200 - total flux cleaned = 3.52116e-05 Jy ! Component: 2250 - total flux cleaned = -8.30595e-05 Jy ! Component: 2300 - total flux cleaned = -0.000156263 Jy ! Component: 2350 - total flux cleaned = -0.000243229 Jy ! Component: 2400 - total flux cleaned = -0.000300424 Jy ! Component: 2450 - total flux cleaned = -0.000357088 Jy ! Component: 2500 - total flux cleaned = -0.000413336 Jy ! Component: 2550 - total flux cleaned = -0.000469002 Jy ! Component: 2600 - total flux cleaned = -0.000482821 Jy ! Component: 2650 - total flux cleaned = -0.000482781 Jy ! Component: 2700 - total flux cleaned = -0.000537104 Jy ! Component: 2750 - total flux cleaned = -0.000563951 Jy ! Component: 2800 - total flux cleaned = -0.000617284 Jy ! Component: 2850 - total flux cleaned = -0.000617352 Jy ! Component: 2900 - total flux cleaned = -0.000617323 Jy ! Component: 2950 - total flux cleaned = -0.000656273 Jy ! Component: 3000 - total flux cleaned = -0.000669276 Jy ! Component: 3050 - total flux cleaned = -0.000682017 Jy ! Component: 3100 - total flux cleaned = -0.000682134 Jy ! Component: 3150 - total flux cleaned = -0.000694607 Jy ! Component: 3200 - total flux cleaned = -0.000732075 Jy ! Component: 3250 - total flux cleaned = -0.000769217 Jy ! Component: 3300 - total flux cleaned = -0.000793703 Jy ! Component: 3350 - total flux cleaned = -0.000830106 Jy ! Component: 3400 - total flux cleaned = -0.00085435 Jy ! Component: 3450 - total flux cleaned = -0.000890221 Jy ! Component: 3500 - total flux cleaned = -0.000949758 Jy ! Component: 3550 - total flux cleaned = -0.000949805 Jy ! Component: 3600 - total flux cleaned = -0.000996574 Jy ! Component: 3650 - total flux cleaned = -0.00101988 Jy ! Component: 3700 - total flux cleaned = -0.00100831 Jy ! Component: 3750 - total flux cleaned = -0.00103137 Jy ! Component: 3800 - total flux cleaned = -0.00104275 Jy ! Component: 3850 - total flux cleaned = -0.00109925 Jy ! Component: 3900 - total flux cleaned = -0.00108799 Jy ! Component: 3950 - total flux cleaned = -0.00106559 Jy ! Component: 4000 - total flux cleaned = -0.00103243 Jy ! Component: 4050 - total flux cleaned = -0.00101042 Jy ! Total flux subtracted in 4096 components = -0.00101047 Jy ! Clean residual min=-0.000738 max=0.000669 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.149348 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 354 components and 0.149348 Jy ![Exited script file: muppet] wmap "J0206-1150_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 8.245 at -5.854 degrees (North through East) ! Clean map min=-0.0014584 max=0.13756 Jy/beam ! Writing clean map to FITS file: J0206-1150_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195212 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.425739 0.425739 0.851479 1.70296 3.40592 6.81183 13.6237 27.2473 54.4947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 8.245 at -5.854 degrees (North through East) ! Clean map min=-0.0014584 max=0.13756 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0206-1150_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:42:44 2019