! Started logfile: J0205-3444_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:35:12 2019 obs J0205-3444_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0205-3444_S_2017_05_31_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613889 visibilities/baseline/integration-bin. ! Found source: J0205-3444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 5304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0205-3444_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926091Jy sigma=0.006140 ! Fit after self-cal, rms=0.903124Jy sigma=0.006004 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=6.549 mas, bpa=3.895 degrees ! Estimated noise=3642.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0672061 Jy ! Component: 100 - total flux cleaned = 0.0897846 Jy ! Total flux subtracted in 100 components = 0.0897846 Jy ! Clean residual min=-0.009958 max=0.013138 Jy/beam ! Clean residual mean=-0.000167 rms=0.003092 Jy/beam ! Combined flux in latest and established models = 0.0897846 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0897846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111820Jy sigma=0.000695 ! Fit after self-cal, rms=0.111574Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=8.085 mas, bpa=3.292 degrees ! Estimated noise=1652.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239023 Jy ! Component: 100 - total flux cleaned = 0.0345381 Jy ! Component: 150 - total flux cleaned = 0.0395145 Jy ! Component: 200 - total flux cleaned = 0.041881 Jy ! Total flux subtracted in 200 components = 0.041881 Jy ! Clean residual min=-0.007132 max=0.015862 Jy/beam ! Clean residual mean=-0.000132 rms=0.002845 Jy/beam ! Combined flux in latest and established models = 0.131666 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 40 components and 0.131666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107551Jy sigma=0.000658 ! Fit after self-cal, rms=0.107468Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.92 ! LA 0.91 MK 0.96 NL 1.36 OV 1.13 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.89 ! LA 0.91 MK 1.05 NL 1.45 OV 1.17 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.91 ! LA 0.96 MK 1.54 NL 1.34 OV 1.17 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.96 ! LA 0.83 MK 0.87 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.107468Jy sigma=0.000657 ! Fit after self-cal, rms=0.122646Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=8.209 mas, bpa=3.832 degrees ! Estimated noise=1682.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772759 Jy ! Component: 100 - total flux cleaned = 0.00770411 Jy ! Component: 150 - total flux cleaned = 0.0081213 Jy ! Component: 200 - total flux cleaned = 0.00811902 Jy ! Total flux subtracted in 200 components = 0.00811902 Jy ! Clean residual min=-0.005110 max=0.005388 Jy/beam ! Clean residual mean=0.000108 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.139785 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.139785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121851Jy sigma=0.000641 ! Fit after self-cal, rms=0.122158Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122158Jy sigma=0.000640 ! Fit after self-cal, rms=0.118552Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.163 mas, bpa=3.937 degrees ! Estimated noise=1660.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382557 Jy ! Component: 100 - total flux cleaned = 0.00391643 Jy ! Component: 150 - total flux cleaned = 0.00360526 Jy ! Component: 200 - total flux cleaned = 0.00344303 Jy ! Total flux subtracted in 200 components = 0.00344303 Jy ! Clean residual min=-0.004397 max=0.004756 Jy/beam ! Clean residual mean=0.000083 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.143228 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.143228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118334Jy sigma=0.000638 ! Fit after self-cal, rms=0.118189Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-121, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399772 Jy ! Component: 100 - total flux cleaned = 0.0044959 Jy ! Component: 150 - total flux cleaned = 0.00462705 Jy ! Component: 200 - total flux cleaned = 0.00439899 Jy ! Total flux subtracted in 200 components = 0.00439899 Jy ! Clean residual min=-0.003697 max=0.004240 Jy/beam ! Clean residual mean=0.000078 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.147627 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.147627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117996Jy sigma=0.000637 ! Fit after self-cal, rms=0.117976Jy sigma=0.000637 ! Inverting map ! Added new window around map position (-43.5, -119.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361739 Jy ! Component: 100 - total flux cleaned = 0.00565171 Jy ! Component: 150 - total flux cleaned = 0.00660534 Jy ! Component: 200 - total flux cleaned = 0.0070974 Jy ! Total flux subtracted in 200 components = 0.0070974 Jy ! Clean residual min=-0.003473 max=0.002942 Jy/beam ! Clean residual mean=0.000042 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.154724 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.154724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117802Jy sigma=0.000636 ! Fit after self-cal, rms=0.117797Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117797Jy sigma=0.000636 ! Fit after self-cal, rms=0.114754Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.159 mas, bpa=3.871 degrees ! Estimated noise=1652.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205926 Jy ! Component: 100 - total flux cleaned = 0.00241296 Jy ! Component: 150 - total flux cleaned = 0.00262805 Jy ! Component: 200 - total flux cleaned = 0.00292154 Jy ! Total flux subtracted in 200 components = 0.00292154 Jy ! Clean residual min=-0.002715 max=0.002600 Jy/beam ! Clean residual mean=0.000021 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.157645 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.157645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114671Jy sigma=0.000635 ! Fit after self-cal, rms=0.114620Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804744 Jy ! Component: 100 - total flux cleaned = 0.0010865 Jy ! Component: 150 - total flux cleaned = 0.00108638 Jy ! Component: 200 - total flux cleaned = 0.00121151 Jy ! Total flux subtracted in 200 components = 0.00121151 Jy ! Clean residual min=-0.002652 max=0.002603 Jy/beam ! Clean residual mean=0.000023 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.158857 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 0.158857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114573Jy sigma=0.000635 ! Fit after self-cal, rms=0.114574Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114574Jy sigma=0.000635 ! Fit after self-cal, rms=0.114329Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.837 mas, bmaj=30.05 mas, bpa=8.285 degrees ! Estimated noise=2092.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113782 Jy ! Component: 100 - total flux cleaned = 0.00128552 Jy ! Component: 150 - total flux cleaned = 0.00138493 Jy ! Component: 200 - total flux cleaned = 0.00147597 Jy ! Total flux subtracted in 200 components = 0.00147597 Jy ! Clean residual min=-0.002007 max=0.002171 Jy/beam ! Clean residual mean=0.000017 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.160333 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 145 components and 0.160333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114314Jy sigma=0.000635 ! Fit after self-cal, rms=0.114293Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016744 Jy ! Component: 100 - total flux cleaned = 0.000261512 Jy ! Component: 150 - total flux cleaned = 0.000366879 Jy ! Component: 200 - total flux cleaned = 0.00046145 Jy ! Total flux subtracted in 200 components = 0.00046145 Jy ! Clean residual min=-0.001960 max=0.002174 Jy/beam ! Clean residual mean=0.000019 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.160794 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 152 components and 0.160794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114288Jy sigma=0.000635 ! Fit after self-cal, rms=0.114288Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.167 mas, bpa=3.932 degrees ! Estimated noise=1659.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 8.167 at 3.932 degrees (North through East) ! Clean map min=-0.0026157 max=0.096782 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.147 mas, bmaj=6.553 mas, bpa=4.666 degrees ! Estimated noise=3800.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0682843 Jy ! Component: 100 - total flux cleaned = 0.0930663 Jy ! Component: 150 - total flux cleaned = 0.109117 Jy ! Component: 200 - total flux cleaned = 0.120017 Jy ! Total flux subtracted in 200 components = 0.120017 Jy ! Clean residual min=-0.009061 max=0.008114 Jy/beam ! Clean residual mean=-0.000060 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.120017 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.120017 Jy ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.167 mas, bpa=3.932 degrees ! Estimated noise=1659.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133118 Jy ! Component: 100 - total flux cleaned = 0.0206905 Jy ! Component: 150 - total flux cleaned = 0.0260313 Jy ! Component: 200 - total flux cleaned = 0.0296222 Jy ! Total flux subtracted in 200 components = 0.0296222 Jy ! Clean residual min=-0.004264 max=0.003453 Jy/beam ! Clean residual mean=-0.000007 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.149639 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 0.149639 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.837 mas, bmaj=30.05 mas, bpa=8.285 degrees ! Estimated noise=2092.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399546 Jy ! Component: 100 - total flux cleaned = 0.00634769 Jy ! Component: 150 - total flux cleaned = 0.00796095 Jy ! Component: 200 - total flux cleaned = 0.0088731 Jy ! Total flux subtracted in 200 components = 0.0088731 Jy ! Clean residual min=-0.002763 max=0.002338 Jy/beam ! Clean residual mean=0.000022 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.158512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433433 Jy ! Component: 100 - total flux cleaned = 0.000858403 Jy ! Component: 150 - total flux cleaned = 0.00120156 Jy ! Component: 200 - total flux cleaned = 0.00148151 Jy ! Total flux subtracted in 200 components = 0.00148151 Jy ! Clean residual min=-0.002501 max=0.002318 Jy/beam ! Clean residual mean=0.000020 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.159994 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 102 components and 0.159994 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.167 mas, bpa=3.932 degrees ! Estimated noise=1659.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184385 Jy ! Component: 100 - total flux cleaned = 0.000734644 Jy ! Component: 150 - total flux cleaned = 0.000664793 Jy ! Component: 200 - total flux cleaned = 0.000839604 Jy ! Total flux subtracted in 200 components = 0.000839604 Jy ! Clean residual min=-0.002765 max=0.002829 Jy/beam ! Clean residual mean=0.000013 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.160833 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.160833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114331Jy sigma=0.000635 ! Fit after self-cal, rms=0.114324Jy sigma=0.000635 wmodel J0205-3444_S_2017_05_31_pus_map.mod ! Writing 125 model components to file: J0205-3444_S_2017_05_31_pus_map.mod wobs J0205-3444_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0205-3444_S_2017_05_31_pus_uvs.fits wwins J0205-3444_S_2017_05_31_pus_map.win ! wwins: Wrote 4 windows to J0205-3444_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194097 Jy ! Component: 100 - total flux cleaned = -0.00015118 Jy ! Component: 150 - total flux cleaned = -0.00014718 Jy ! Component: 200 - total flux cleaned = -0.000333539 Jy ! Component: 250 - total flux cleaned = -0.000614523 Jy ! Component: 300 - total flux cleaned = -0.000780147 Jy ! Component: 350 - total flux cleaned = -0.00106291 Jy ! Component: 400 - total flux cleaned = -0.00127309 Jy ! Component: 450 - total flux cleaned = -0.00138893 Jy ! Component: 500 - total flux cleaned = -0.00150091 Jy ! Component: 550 - total flux cleaned = -0.00168856 Jy ! Component: 600 - total flux cleaned = -0.00179181 Jy ! Component: 650 - total flux cleaned = -0.0019171 Jy ! Component: 700 - total flux cleaned = -0.00206267 Jy ! Component: 750 - total flux cleaned = -0.00213368 Jy ! Component: 800 - total flux cleaned = -0.00231733 Jy ! Component: 850 - total flux cleaned = -0.00249622 Jy ! Component: 900 - total flux cleaned = -0.00269293 Jy ! Component: 950 - total flux cleaned = -0.00288492 Jy ! Component: 1000 - total flux cleaned = -0.00305188 Jy ! Component: 1050 - total flux cleaned = -0.0031335 Jy ! Component: 1100 - total flux cleaned = -0.00325392 Jy ! Component: 1150 - total flux cleaned = -0.00329322 Jy ! Component: 1200 - total flux cleaned = -0.00331233 Jy ! Component: 1250 - total flux cleaned = -0.00342684 Jy ! Component: 1300 - total flux cleaned = -0.00346427 Jy ! Component: 1350 - total flux cleaned = -0.0035378 Jy ! Component: 1400 - total flux cleaned = -0.0035923 Jy ! Component: 1450 - total flux cleaned = -0.00362855 Jy ! Component: 1500 - total flux cleaned = -0.00371744 Jy ! Component: 1550 - total flux cleaned = -0.00385735 Jy ! Component: 1600 - total flux cleaned = -0.00399577 Jy ! Component: 1650 - total flux cleaned = -0.0041496 Jy ! Component: 1700 - total flux cleaned = -0.00430162 Jy ! Component: 1750 - total flux cleaned = -0.00446862 Jy ! Component: 1800 - total flux cleaned = -0.0046338 Jy ! Component: 1850 - total flux cleaned = -0.00476456 Jy ! Component: 1900 - total flux cleaned = -0.00487798 Jy ! Component: 1950 - total flux cleaned = -0.00495829 Jy ! Component: 2000 - total flux cleaned = -0.00499016 Jy ! Component: 2050 - total flux cleaned = -0.00497443 Jy ! Component: 2100 - total flux cleaned = -0.00505327 Jy ! Component: 2150 - total flux cleaned = -0.00506895 Jy ! Component: 2200 - total flux cleaned = -0.00513148 Jy ! Component: 2250 - total flux cleaned = -0.00517835 Jy ! Component: 2300 - total flux cleaned = -0.00527175 Jy ! Component: 2350 - total flux cleaned = -0.00530285 Jy ! Component: 2400 - total flux cleaned = -0.00538023 Jy ! Component: 2450 - total flux cleaned = -0.00544198 Jy ! Component: 2500 - total flux cleaned = -0.00551917 Jy ! Component: 2550 - total flux cleaned = -0.00555011 Jy ! Component: 2600 - total flux cleaned = -0.00561176 Jy ! Component: 2650 - total flux cleaned = -0.00565819 Jy ! Component: 2700 - total flux cleaned = -0.00564278 Jy ! Component: 2750 - total flux cleaned = -0.00565819 Jy ! Component: 2800 - total flux cleaned = -0.00561105 Jy ! Component: 2850 - total flux cleaned = -0.00559513 Jy ! Component: 2900 - total flux cleaned = -0.00556342 Jy ! Component: 2950 - total flux cleaned = -0.00551539 Jy ! Component: 3000 - total flux cleaned = -0.00545116 Jy ! Component: 3050 - total flux cleaned = -0.00541882 Jy ! Component: 3100 - total flux cleaned = -0.0053863 Jy ! Component: 3150 - total flux cleaned = -0.00530412 Jy ! Component: 3200 - total flux cleaned = -0.00528736 Jy ! Component: 3250 - total flux cleaned = -0.00523724 Jy ! Component: 3300 - total flux cleaned = -0.00522034 Jy ! Component: 3350 - total flux cleaned = -0.00515264 Jy ! Component: 3400 - total flux cleaned = -0.00508398 Jy ! Component: 3450 - total flux cleaned = -0.00510142 Jy ! Component: 3500 - total flux cleaned = -0.00499625 Jy ! Component: 3550 - total flux cleaned = -0.00499611 Jy ! Component: 3600 - total flux cleaned = -0.0049604 Jy ! Component: 3650 - total flux cleaned = -0.0049242 Jy ! Component: 3700 - total flux cleaned = -0.0048691 Jy ! Component: 3750 - total flux cleaned = -0.00486905 Jy ! Component: 3800 - total flux cleaned = -0.00483141 Jy ! Component: 3850 - total flux cleaned = -0.00479328 Jy ! Component: 3900 - total flux cleaned = -0.00477402 Jy ! Component: 3950 - total flux cleaned = -0.00473493 Jy ! Component: 4000 - total flux cleaned = -0.0047349 Jy ! Component: 4050 - total flux cleaned = -0.004715 Jy ! Total flux subtracted in 4096 components = -0.00471484 Jy ! Clean residual min=-0.001453 max=0.001251 Jy/beam ! Clean residual mean=-0.000009 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.156118 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 323 components and 0.156118 Jy ![Exited script file: muppet] wmap "J0205-3444_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 8.167 at 3.932 degrees (North through East) ! Clean map min=-0.0030757 max=0.099326 Jy/beam ! Writing clean map to FITS file: J0205-3444_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0993256 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000355314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07318 1.07318 2.14636 4.29272 8.58544 17.1709 34.3418 68.6835 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 8.167 at 3.932 degrees (North through East) ! Clean map min=-0.0030757 max=0.099326 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0205-3444_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:35:21 2019