! Started logfile: J0205+3212_X_2017_07_09_pus_uvs.log on Wed May 8 15:19:41 2019 obs J0205+3212_X_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0205+3212_X_2017_07_09_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.738519 visibilities/baseline/integration-bin. ! Found source: J0205+3212 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 979 lines of history. ! ! Reading 11964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0205+3212_X_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.424650Jy sigma=0.003714 ! Fit after self-cal, rms=0.354996Jy sigma=0.003146 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0752% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.7403 mas, bmaj=1.368 mas, bpa=-5.623 degrees ! Estimated noise=1118.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.992407 Jy ! Component: 100 - total flux cleaned = 1.22269 Jy ! Total flux subtracted in 100 components = 1.22269 Jy ! Clean residual min=-0.028882 max=0.089029 Jy/beam ! Clean residual mean=-0.000133 rms=0.008819 Jy/beam ! Combined flux in latest and established models = 1.22269 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.22269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.186241Jy sigma=0.001648 ! Fit after self-cal, rms=0.186231Jy sigma=0.001648 ! Inverting map ! Your choice of large map pixels excluded 0.0752% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100179 Jy ! Component: 100 - total flux cleaned = 0.156295 Jy ! Total flux subtracted in 100 components = 0.156295 Jy ! Clean residual min=-0.016669 max=0.027945 Jy/beam ! Clean residual mean=-0.000030 rms=0.004208 Jy/beam ! Combined flux in latest and established models = 1.37899 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 1.37899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110692Jy sigma=0.000948 ! Fit after self-cal, rms=0.110143Jy sigma=0.000944 ! Inverting map ! Your choice of large map pixels excluded 0.0752% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337534 Jy ! Component: 100 - total flux cleaned = 0.0540684 Jy ! Total flux subtracted in 100 components = 0.0540684 Jy ! Clean residual min=-0.013733 max=0.014227 Jy/beam ! Clean residual mean=0.000005 rms=0.003160 Jy/beam ! Combined flux in latest and established models = 1.43306 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 1.43306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098424Jy sigma=0.000826 ! Fit after self-cal, rms=0.098171Jy sigma=0.000824 ! Inverting map ! Your choice of large map pixels excluded 0.0752% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0752% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9137 mas, bmaj=1.6 mas, bpa=-3.799 degrees ! Estimated noise=754.739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015162 Jy ! Component: 100 - total flux cleaned = 0.0233571 Jy ! Component: 150 - total flux cleaned = 0.0273079 Jy ! Component: 200 - total flux cleaned = 0.0284518 Jy ! Total flux subtracted in 200 components = 0.0284518 Jy ! Clean residual min=-0.012019 max=0.012519 Jy/beam ! Clean residual mean=0.000036 rms=0.002898 Jy/beam ! Combined flux in latest and established models = 1.46151 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 1.46151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096063Jy sigma=0.000800 ! Fit after self-cal, rms=0.095983Jy sigma=0.000799 ! Inverting map ! Your choice of large map pixels excluded 0.0752% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.01 ! LA 0.98 MK 1.00 NL 0.97 OV 1.00 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.03 KP 1.01 ! LA 0.98 MK 1.01 NL 0.97 OV 1.00 ! PT 1.05 SC 1.08 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.00 ! LA 1.00 MK 1.01 NL 0.96 OV 1.00 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 0.99 ! LA 1.01 MK 1.01 NL 0.97 OV 1.00 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.96 KP 0.99 ! LA 0.99 MK 1.03 NL 0.97 OV 1.00 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.99 ! LA 1.00 MK 1.00 NL 0.97 OV 1.00 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! LA 1.00 MK 1.02 NL 0.97 OV 0.99 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.99 KP 1.00 ! LA 0.98 MK 1.00 NL 0.97 OV 0.99 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.99 ! LA 0.99 MK 1.00 NL 0.96 OV 1.00 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.03 KP 0.99 ! LA 1.01 MK 1.01 NL 0.97 OV 0.98 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.01 KP 1.00 ! LA 1.01 MK 0.99 NL 0.97 OV 0.99 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.97 KP 0.99 ! LA 0.99 MK 1.00 NL 0.97 OV 1.00 ! PT 1.03 SC 1.03 ! ! ! Fit before self-cal, rms=0.095983Jy sigma=0.000799 ! Fit after self-cal, rms=0.087720Jy sigma=0.000723 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9206 mas, bmaj=1.612 mas, bpa=-4.521 degrees ! Estimated noise=758.436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00556683 Jy ! Component: 100 - total flux cleaned = -0.00641204 Jy ! Component: 150 - total flux cleaned = -0.00694957 Jy ! Component: 200 - total flux cleaned = -0.0074043 Jy ! Total flux subtracted in 200 components = -0.0074043 Jy ! Clean residual min=-0.008649 max=0.007160 Jy/beam ! Clean residual mean=-0.000043 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 1.4541 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 1.45411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086796Jy sigma=0.000715 ! Fit after self-cal, rms=0.086778Jy sigma=0.000715 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086778Jy sigma=0.000715 ! Fit after self-cal, rms=0.082234Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9218 mas, bmaj=1.61 mas, bpa=-4.449 degrees ! Estimated noise=758.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148475 Jy ! Component: 100 - total flux cleaned = -0.00173019 Jy ! Component: 150 - total flux cleaned = -0.00172327 Jy ! Component: 200 - total flux cleaned = -0.00172295 Jy ! Total flux subtracted in 200 components = -0.00172295 Jy ! Clean residual min=-0.004448 max=0.006969 Jy/beam ! Clean residual mean=0.000004 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 1.45238 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 1.45238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081920Jy sigma=0.000671 ! Fit after self-cal, rms=0.081902Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705322 Jy ! Component: 100 - total flux cleaned = 0.0114641 Jy ! Component: 150 - total flux cleaned = 0.0138225 Jy ! Component: 200 - total flux cleaned = 0.0144527 Jy ! Total flux subtracted in 200 components = 0.0144527 Jy ! Clean residual min=-0.003825 max=0.004405 Jy/beam ! Clean residual mean=0.000015 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 1.46683 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 1.46683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081185Jy sigma=0.000665 ! Fit after self-cal, rms=0.081152Jy sigma=0.000664 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081152Jy sigma=0.000664 ! Fit after self-cal, rms=0.081028Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.922 mas, bmaj=1.611 mas, bpa=-4.526 degrees ! Estimated noise=757.756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182352 Jy ! Component: 100 - total flux cleaned = 0.00314312 Jy ! Component: 150 - total flux cleaned = 0.00351639 Jy ! Component: 200 - total flux cleaned = 0.00399754 Jy ! Total flux subtracted in 200 components = 0.00399754 Jy ! Clean residual min=-0.003674 max=0.003873 Jy/beam ! Clean residual mean=0.000016 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 1.47083 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 1.47083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080787Jy sigma=0.000661 ! Fit after self-cal, rms=0.080774Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422829 Jy ! Component: 100 - total flux cleaned = 0.000777073 Jy ! Component: 150 - total flux cleaned = 0.00103801 Jy ! Component: 200 - total flux cleaned = 0.00116014 Jy ! Total flux subtracted in 200 components = 0.00116014 Jy ! Clean residual min=-0.003715 max=0.003725 Jy/beam ! Clean residual mean=0.000017 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 1.47199 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 1.47199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080667Jy sigma=0.000660 ! Fit after self-cal, rms=0.080660Jy sigma=0.000660 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080660Jy sigma=0.000660 ! Fit after self-cal, rms=0.080633Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.045 mas, bmaj=2.588 mas, bpa=1.382 degrees ! Estimated noise=949.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029386 Jy ! Component: 100 - total flux cleaned = 0.00369995 Jy ! Component: 150 - total flux cleaned = 0.00431581 Jy ! Component: 200 - total flux cleaned = 0.00476417 Jy ! Total flux subtracted in 200 components = 0.00476417 Jy ! Clean residual min=-0.003703 max=0.004224 Jy/beam ! Clean residual mean=0.000046 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 1.47676 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 1.47676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080586Jy sigma=0.000659 ! Fit after self-cal, rms=0.080563Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677671 Jy ! Component: 100 - total flux cleaned = 0.00102493 Jy ! Component: 150 - total flux cleaned = 0.00139268 Jy ! Component: 200 - total flux cleaned = 0.00170049 Jy ! Total flux subtracted in 200 components = 0.00170049 Jy ! Clean residual min=-0.003703 max=0.004150 Jy/beam ! Clean residual mean=0.000049 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 1.47846 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 1.47846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080575Jy sigma=0.000659 ! Fit after self-cal, rms=0.080563Jy sigma=0.000659 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9223 mas, bmaj=1.611 mas, bpa=-4.573 degrees ! Estimated noise=757.791 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9223 x 1.611 at -4.573 degrees (North through East) ! Clean map min=-0.0033005 max=1.3036 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080563Jy sigma=0.000659 ! Fit after self-cal, rms=0.075123Jy sigma=0.000611 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9225 mas, bmaj=1.612 mas, bpa=-4.611 degrees ! Estimated noise=757.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000555996 Jy ! Component: 100 - total flux cleaned = -0.000553534 Jy ! Component: 150 - total flux cleaned = -0.000669895 Jy ! Component: 200 - total flux cleaned = -0.000779043 Jy ! Total flux subtracted in 200 components = -0.000779043 Jy ! Clean residual min=-0.003628 max=0.003677 Jy/beam ! Clean residual mean=0.000018 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 1.47768 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 1.47768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075023Jy sigma=0.000610 ! Fit after self-cal, rms=0.075020Jy sigma=0.000610 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.47163e-05 Jy ! Component: 100 - total flux cleaned = -0.000106416 Jy ! Component: 150 - total flux cleaned = -0.000205615 Jy ! Component: 200 - total flux cleaned = -0.000205285 Jy ! Total flux subtracted in 200 components = -0.000205285 Jy ! Clean residual min=-0.003601 max=0.003542 Jy/beam ! Clean residual mean=0.000018 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 1.47747 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 1.47747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074958Jy sigma=0.000610 ! Fit after self-cal, rms=0.074957Jy sigma=0.000610 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074957Jy sigma=0.000610 ! Fit after self-cal, rms=0.074973Jy sigma=0.000610 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.7457 mas, bmaj=1.379 mas, bpa=-6.256 degrees ! Estimated noise=1129.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.99935 Jy ! Component: 100 - total flux cleaned = 1.2266 Jy ! Component: 150 - total flux cleaned = 1.32179 Jy ! Component: 200 - total flux cleaned = 1.37452 Jy ! Total flux subtracted in 200 components = 1.37452 Jy ! Clean residual min=-0.012150 max=0.026245 Jy/beam ! Clean residual mean=-0.000045 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 1.37452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.37452 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9227 mas, bmaj=1.612 mas, bpa=-4.623 degrees ! Estimated noise=758.088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364032 Jy ! Component: 100 - total flux cleaned = 0.0552915 Jy ! Component: 150 - total flux cleaned = 0.067156 Jy ! Component: 200 - total flux cleaned = 0.0759304 Jy ! Total flux subtracted in 200 components = 0.0759304 Jy ! Clean residual min=-0.004543 max=0.007685 Jy/beam ! Clean residual mean=-0.000013 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 1.45045 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 1.45045 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (0.4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00808445 Jy ! Component: 100 - total flux cleaned = 0.0140573 Jy ! Component: 150 - total flux cleaned = 0.0188615 Jy ! Component: 200 - total flux cleaned = 0.0213071 Jy ! Total flux subtracted in 200 components = 0.0213071 Jy ! Clean residual min=-0.003317 max=0.004125 Jy/beam ! Clean residual mean=0.000015 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.47175 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 1.47175 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-4, 12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039669 Jy ! Component: 100 - total flux cleaned = 0.00588692 Jy ! Component: 150 - total flux cleaned = 0.00750521 Jy ! Component: 200 - total flux cleaned = 0.00854191 Jy ! Total flux subtracted in 200 components = 0.00854191 Jy ! Clean residual min=-0.003166 max=0.003167 Jy/beam ! Clean residual mean=0.000018 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 1.4803 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 1.4803 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.045 mas, bmaj=2.587 mas, bpa=1.333 degrees ! Estimated noise=949.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285866 Jy ! Component: 100 - total flux cleaned = 0.00464984 Jy ! Component: 150 - total flux cleaned = 0.00585174 Jy ! Component: 200 - total flux cleaned = 0.00630104 Jy ! Total flux subtracted in 200 components = 0.00630104 Jy ! Clean residual min=-0.003259 max=0.002393 Jy/beam ! Clean residual mean=0.000048 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.4866 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024004 Jy ! Component: 100 - total flux cleaned = 0.000459357 Jy ! Component: 150 - total flux cleaned = 0.000626784 Jy ! Component: 200 - total flux cleaned = 0.000813803 Jy ! Total flux subtracted in 200 components = 0.000813803 Jy ! Clean residual min=-0.003159 max=0.002358 Jy/beam ! Clean residual mean=0.000049 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.48741 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 1.48741 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9227 mas, bmaj=1.612 mas, bpa=-4.623 degrees ! Estimated noise=758.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000832491 Jy ! Component: 100 - total flux cleaned = -0.000833508 Jy ! Component: 150 - total flux cleaned = -0.000733593 Jy ! Component: 200 - total flux cleaned = -0.00073245 Jy ! Total flux subtracted in 200 components = -0.00073245 Jy ! Clean residual min=-0.003096 max=0.002513 Jy/beam ! Clean residual mean=0.000020 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 1.48668 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 1.48668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075348Jy sigma=0.000612 ! Fit after self-cal, rms=0.075298Jy sigma=0.000612 wmodel J0205+3212_X_2017_07_09_pus_map.mod ! Writing 104 model components to file: J0205+3212_X_2017_07_09_pus_map.mod wobs J0205+3212_X_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0205+3212_X_2017_07_09_pus_uvs.fits wwins J0205+3212_X_2017_07_09_pus_map.win ! wwins: Wrote 4 windows to J0205+3212_X_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000985199 Jy ! Component: 100 - total flux cleaned = -0.00108236 Jy ! Component: 150 - total flux cleaned = -0.000990075 Jy ! Component: 200 - total flux cleaned = -0.000766945 Jy ! Component: 250 - total flux cleaned = -0.000550808 Jy ! Component: 300 - total flux cleaned = -0.000340249 Jy ! Component: 350 - total flux cleaned = -0.000257367 Jy ! Component: 400 - total flux cleaned = -1.60718e-05 Jy ! Component: 450 - total flux cleaned = 6.25691e-05 Jy ! Component: 500 - total flux cleaned = 0.000177515 Jy ! Component: 550 - total flux cleaned = 0.00017681 Jy ! Component: 600 - total flux cleaned = 0.00017686 Jy ! Component: 650 - total flux cleaned = 0.00021306 Jy ! Component: 700 - total flux cleaned = 0.000177084 Jy ! Component: 750 - total flux cleaned = 0.000247063 Jy ! Component: 800 - total flux cleaned = 0.000350811 Jy ! Component: 850 - total flux cleaned = 0.000453099 Jy ! Component: 900 - total flux cleaned = 0.000553827 Jy ! Component: 950 - total flux cleaned = 0.000819159 Jy ! Component: 1000 - total flux cleaned = 0.000949793 Jy ! Component: 1050 - total flux cleaned = 0.00114273 Jy ! Component: 1100 - total flux cleaned = 0.00126989 Jy ! Component: 1150 - total flux cleaned = 0.00139559 Jy ! Component: 1200 - total flux cleaned = 0.00152037 Jy ! Component: 1250 - total flux cleaned = 0.00173557 Jy ! Component: 1300 - total flux cleaned = 0.00194747 Jy ! Component: 1350 - total flux cleaned = 0.00203698 Jy ! Component: 1400 - total flux cleaned = 0.00209618 Jy ! Component: 1450 - total flux cleaned = 0.0023009 Jy ! Component: 1500 - total flux cleaned = 0.00247418 Jy ! Component: 1550 - total flux cleaned = 0.00264521 Jy ! Component: 1600 - total flux cleaned = 0.00272929 Jy ! Component: 1650 - total flux cleaned = 0.00286895 Jy ! Component: 1700 - total flux cleaned = 0.00289654 Jy ! Component: 1750 - total flux cleaned = 0.0029515 Jy ! Component: 1800 - total flux cleaned = 0.00306022 Jy ! Component: 1850 - total flux cleaned = 0.00308723 Jy ! Component: 1900 - total flux cleaned = 0.00321964 Jy ! Component: 1950 - total flux cleaned = 0.00337675 Jy ! Component: 2000 - total flux cleaned = 0.00340258 Jy ! Total flux subtracted in 2048 components = 0.00345385 Jy ! Clean residual min=-0.001346 max=0.001280 Jy/beam ! Clean residual mean=0.000009 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 1.49013 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 246 components and 1.49013 Jy ![Exited script file: muppet] wmap "J0205+3212_X_2017_07_09_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9227 x 1.612 at -4.623 degrees (North through East) ! Clean map min=-0.0022696 max=1.3071 Jy/beam ! Writing clean map to FITS file: J0205+3212_X_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.3071 invert ! Inverting map ! Your choice of large map pixels excluded 0.0755% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000456715 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.104823 0.104823 0.209646 0.419293 0.838585 1.67717 3.35434 6.70868 13.4174 26.8347 53.6695 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.307 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9227 x 1.612 at -4.623 degrees (North through East) ! Clean map min=-0.0022696 max=1.3071 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0205+3212_X_2017_07_09_pus_uvs.log closed on Wed May 8 15:19:42 2019