! Started logfile: J0204-3328_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:35:04 2019 obs J0204-3328_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0204-3328_S_2017_05_31_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784795 visibilities/baseline/integration-bin. ! Found source: J0204-3328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 5368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0204-3328_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904017Jy sigma=0.005905 ! Fit after self-cal, rms=0.882077Jy sigma=0.005769 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.279 mas, bmaj=6.785 mas, bpa=2.011 degrees ! Estimated noise=2590.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.093601 Jy ! Component: 100 - total flux cleaned = 0.13105 Jy ! Total flux subtracted in 100 components = 0.13105 Jy ! Clean residual min=-0.011746 max=0.017271 Jy/beam ! Clean residual mean=0.000014 rms=0.003878 Jy/beam ! Combined flux in latest and established models = 0.13105 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.13105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157744Jy sigma=0.000702 ! Fit after self-cal, rms=0.157386Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.086 mas, bpa=3.009 degrees ! Estimated noise=1836.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165311 Jy ! Component: 100 - total flux cleaned = 0.0232387 Jy ! Component: 150 - total flux cleaned = 0.0262747 Jy ! Component: 200 - total flux cleaned = 0.0275755 Jy ! Total flux subtracted in 200 components = 0.0275755 Jy ! Clean residual min=-0.010277 max=0.017911 Jy/beam ! Clean residual mean=0.000232 rms=0.004085 Jy/beam ! Combined flux in latest and established models = 0.158625 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.158625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154805Jy sigma=0.000688 ! Fit after self-cal, rms=0.154815Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.48 FD 1.00 HN 1.00* KP 0.92 ! LA 0.94 MK 0.92 NL 1.12 OV 0.99 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.91 ! LA 0.95 MK 0.99 NL 1.39 OV 1.05 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.97 ! LA 1.01 MK 1.16 NL 1.31 OV 0.96 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.05 ! LA 0.80 MK 0.86 NL 1.00* OV 1.00* ! PT 1.10 SC 1.00* ! ! ! Fit before self-cal, rms=0.154815Jy sigma=0.000688 ! Fit after self-cal, rms=0.123419Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=8.072 mas, bpa=3.034 degrees ! Estimated noise=1832.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000762731 Jy ! Component: 100 - total flux cleaned = -0.000709528 Jy ! Component: 150 - total flux cleaned = -0.000806806 Jy ! Component: 200 - total flux cleaned = -0.000847488 Jy ! Total flux subtracted in 200 components = -0.000847488 Jy ! Clean residual min=-0.008560 max=0.017230 Jy/beam ! Clean residual mean=0.000242 rms=0.003579 Jy/beam ! Combined flux in latest and established models = 0.157778 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.157778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123367Jy sigma=0.000675 ! Fit after self-cal, rms=0.123395Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123395Jy sigma=0.000675 ! Fit after self-cal, rms=0.123431Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=8.077 mas, bpa=2.944 degrees ! Estimated noise=1826.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466843 Jy ! Component: 100 - total flux cleaned = -0.000595918 Jy ! Component: 150 - total flux cleaned = -0.000595623 Jy ! Component: 200 - total flux cleaned = -0.000630422 Jy ! Total flux subtracted in 200 components = -0.000630422 Jy ! Clean residual min=-0.008670 max=0.016978 Jy/beam ! Clean residual mean=0.000240 rms=0.003560 Jy/beam ! Combined flux in latest and established models = 0.157147 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.157147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123398Jy sigma=0.000674 ! Fit after self-cal, rms=0.123410Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (62.5, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152207 Jy ! Component: 100 - total flux cleaned = 0.0219247 Jy ! Component: 150 - total flux cleaned = 0.0257273 Jy ! Component: 200 - total flux cleaned = 0.0283224 Jy ! Total flux subtracted in 200 components = 0.0283224 Jy ! Clean residual min=-0.006316 max=0.006876 Jy/beam ! Clean residual mean=0.000060 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 0.18547 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 71 components and 0.18547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121679Jy sigma=0.000661 ! Fit after self-cal, rms=0.121454Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121454Jy sigma=0.000660 ! Fit after self-cal, rms=0.120919Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=8.103 mas, bpa=2.745 degrees ! Estimated noise=1792.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448474 Jy ! Component: 100 - total flux cleaned = 0.0065833 Jy ! Component: 150 - total flux cleaned = 0.00687718 Jy ! Component: 200 - total flux cleaned = 0.00692735 Jy ! Total flux subtracted in 200 components = 0.00692735 Jy ! Clean residual min=-0.005183 max=0.005380 Jy/beam ! Clean residual mean=0.000060 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.192397 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.192397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120731Jy sigma=0.000657 ! Fit after self-cal, rms=0.120791Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824645 Jy ! Component: 100 - total flux cleaned = 0.00086959 Jy ! Component: 150 - total flux cleaned = 0.000910663 Jy ! Component: 200 - total flux cleaned = 0.000948371 Jy ! Total flux subtracted in 200 components = 0.000948371 Jy ! Clean residual min=-0.005196 max=0.005389 Jy/beam ! Clean residual mean=0.000055 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.193345 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.193345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120749Jy sigma=0.000657 ! Fit after self-cal, rms=0.120747Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120747Jy sigma=0.000657 ! Fit after self-cal, rms=0.121239Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.466 mas, bmaj=27.93 mas, bpa=8.082 degrees ! Estimated noise=2301.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158975 Jy ! Component: 100 - total flux cleaned = 0.00163567 Jy ! Component: 150 - total flux cleaned = 0.00167307 Jy ! Component: 200 - total flux cleaned = 0.00174939 Jy ! Total flux subtracted in 200 components = 0.00174939 Jy ! Clean residual min=-0.006490 max=0.006467 Jy/beam ! Clean residual mean=0.000098 rms=0.002139 Jy/beam ! Combined flux in latest and established models = 0.195095 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 0.195095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121223Jy sigma=0.000656 ! Fit after self-cal, rms=0.121260Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205182 Jy ! Component: 100 - total flux cleaned = 0.000240791 Jy ! Component: 150 - total flux cleaned = 0.000308875 Jy ! Component: 200 - total flux cleaned = 0.000341804 Jy ! Total flux subtracted in 200 components = 0.000341804 Jy ! Clean residual min=-0.006442 max=0.006437 Jy/beam ! Clean residual mean=0.000094 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 0.195437 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 96 components and 0.195437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121250Jy sigma=0.000656 ! Fit after self-cal, rms=0.121245Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=8.11 mas, bpa=2.567 degrees ! Estimated noise=1783.69 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 8.11 at 2.567 degrees (North through East) ! Clean map min=-0.0048972 max=0.11188 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.302 mas, bmaj=6.876 mas, bpa=1.558 degrees ! Estimated noise=2434.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882039 Jy ! Component: 100 - total flux cleaned = 0.124029 Jy ! Component: 150 - total flux cleaned = 0.142821 Jy ! Component: 200 - total flux cleaned = 0.154922 Jy ! Total flux subtracted in 200 components = 0.154922 Jy ! Clean residual min=-0.008165 max=0.008124 Jy/beam ! Clean residual mean=0.000046 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 0.154922 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.154922 Jy ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=8.11 mas, bpa=2.567 degrees ! Estimated noise=1783.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116833 Jy ! Component: 100 - total flux cleaned = 0.019716 Jy ! Component: 150 - total flux cleaned = 0.0255459 Jy ! Component: 200 - total flux cleaned = 0.0298661 Jy ! Total flux subtracted in 200 components = 0.0298661 Jy ! Clean residual min=-0.006078 max=0.005622 Jy/beam ! Clean residual mean=0.000079 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.184788 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.184788 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.466 mas, bmaj=27.93 mas, bpa=8.082 degrees ! Estimated noise=2301.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521489 Jy ! Component: 100 - total flux cleaned = 0.00797375 Jy ! Component: 150 - total flux cleaned = 0.00849149 Jy ! Component: 200 - total flux cleaned = 0.00893578 Jy ! Total flux subtracted in 200 components = 0.00893578 Jy ! Clean residual min=-0.006575 max=0.006355 Jy/beam ! Clean residual mean=0.000119 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.193724 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000384029 Jy ! Component: 100 - total flux cleaned = 0.000719332 Jy ! Component: 150 - total flux cleaned = 0.000966556 Jy ! Component: 200 - total flux cleaned = 0.0011471 Jy ! Total flux subtracted in 200 components = 0.0011471 Jy ! Clean residual min=-0.006503 max=0.006451 Jy/beam ! Clean residual mean=0.000109 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.194871 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.194871 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=8.11 mas, bpa=2.567 degrees ! Estimated noise=1783.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274376 Jy ! Component: 100 - total flux cleaned = 0.000362426 Jy ! Component: 150 - total flux cleaned = 0.000244852 Jy ! Component: 200 - total flux cleaned = 0.000139081 Jy ! Total flux subtracted in 200 components = 0.000139081 Jy ! Clean residual min=-0.005275 max=0.005083 Jy/beam ! Clean residual mean=0.000054 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.19501 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.19501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121289Jy sigma=0.000656 ! Fit after self-cal, rms=0.121304Jy sigma=0.000656 wmodel J0204-3328_S_2017_05_31_pus_map.mod ! Writing 92 model components to file: J0204-3328_S_2017_05_31_pus_map.mod wobs J0204-3328_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0204-3328_S_2017_05_31_pus_uvs.fits wwins J0204-3328_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J0204-3328_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.65398e-05 Jy ! Component: 100 - total flux cleaned = -0.00012135 Jy ! Component: 150 - total flux cleaned = -0.000590578 Jy ! Component: 200 - total flux cleaned = -0.00125283 Jy ! Component: 250 - total flux cleaned = -0.00187642 Jy ! Component: 300 - total flux cleaned = -0.00233476 Jy ! Component: 350 - total flux cleaned = -0.00276993 Jy ! Component: 400 - total flux cleaned = -0.00318263 Jy ! Component: 450 - total flux cleaned = -0.0032937 Jy ! Component: 500 - total flux cleaned = -0.00345559 Jy ! Component: 550 - total flux cleaned = -0.00361061 Jy ! Component: 600 - total flux cleaned = -0.00361019 Jy ! Component: 650 - total flux cleaned = -0.00361036 Jy ! Component: 700 - total flux cleaned = -0.00365789 Jy ! Component: 750 - total flux cleaned = -0.00365812 Jy ! Component: 800 - total flux cleaned = -0.00378889 Jy ! Component: 850 - total flux cleaned = -0.00378817 Jy ! Component: 900 - total flux cleaned = -0.00382988 Jy ! Component: 950 - total flux cleaned = -0.0039097 Jy ! Component: 1000 - total flux cleaned = -0.00398741 Jy ! Component: 1050 - total flux cleaned = -0.00410012 Jy ! Component: 1100 - total flux cleaned = -0.00413631 Jy ! Component: 1150 - total flux cleaned = -0.00427904 Jy ! Component: 1200 - total flux cleaned = -0.00438345 Jy ! Component: 1250 - total flux cleaned = -0.00455379 Jy ! Component: 1300 - total flux cleaned = -0.00468679 Jy ! Component: 1350 - total flux cleaned = -0.00475255 Jy ! Component: 1400 - total flux cleaned = -0.00488197 Jy ! Component: 1450 - total flux cleaned = -0.00497733 Jy ! Component: 1500 - total flux cleaned = -0.00507102 Jy ! Component: 1550 - total flux cleaned = -0.00510107 Jy ! Component: 1600 - total flux cleaned = -0.00507043 Jy ! Component: 1650 - total flux cleaned = -0.00516042 Jy ! Component: 1700 - total flux cleaned = -0.00524941 Jy ! Component: 1750 - total flux cleaned = -0.00542475 Jy ! Component: 1800 - total flux cleaned = -0.00545347 Jy ! Component: 1850 - total flux cleaned = -0.00548202 Jy ! Component: 1900 - total flux cleaned = -0.00556688 Jy ! Component: 1950 - total flux cleaned = -0.00559466 Jy ! Component: 2000 - total flux cleaned = -0.00562243 Jy ! Component: 2050 - total flux cleaned = -0.00562256 Jy ! Component: 2100 - total flux cleaned = -0.00565006 Jy ! Component: 2150 - total flux cleaned = -0.00578486 Jy ! Component: 2200 - total flux cleaned = -0.00578482 Jy ! Component: 2250 - total flux cleaned = -0.00591809 Jy ! Component: 2300 - total flux cleaned = -0.00599722 Jy ! Component: 2350 - total flux cleaned = -0.00607593 Jy ! Component: 2400 - total flux cleaned = -0.00612815 Jy ! Component: 2450 - total flux cleaned = -0.00620596 Jy ! Component: 2500 - total flux cleaned = -0.00625778 Jy ! Component: 2550 - total flux cleaned = -0.00628359 Jy ! Component: 2600 - total flux cleaned = -0.00633514 Jy ! Component: 2650 - total flux cleaned = -0.00641185 Jy ! Component: 2700 - total flux cleaned = -0.00638628 Jy ! Component: 2750 - total flux cleaned = -0.00646248 Jy ! Component: 2800 - total flux cleaned = -0.00643698 Jy ! Component: 2850 - total flux cleaned = -0.006437 Jy ! Component: 2900 - total flux cleaned = -0.00646216 Jy ! Component: 2950 - total flux cleaned = -0.00641171 Jy ! Component: 3000 - total flux cleaned = -0.00638649 Jy ! Component: 3050 - total flux cleaned = -0.00636143 Jy ! Component: 3100 - total flux cleaned = -0.00631149 Jy ! Component: 3150 - total flux cleaned = -0.00626132 Jy ! Component: 3200 - total flux cleaned = -0.00621112 Jy ! Component: 3250 - total flux cleaned = -0.00613572 Jy ! Component: 3300 - total flux cleaned = -0.00605989 Jy ! Component: 3350 - total flux cleaned = -0.0059586 Jy ! Component: 3400 - total flux cleaned = -0.00590757 Jy ! Component: 3450 - total flux cleaned = -0.00580576 Jy ! Component: 3500 - total flux cleaned = -0.00570349 Jy ! Component: 3550 - total flux cleaned = -0.00557506 Jy ! Component: 3600 - total flux cleaned = -0.00549769 Jy ! Component: 3650 - total flux cleaned = -0.00539387 Jy ! Component: 3700 - total flux cleaned = -0.0052895 Jy ! Component: 3750 - total flux cleaned = -0.0051841 Jy ! Component: 3800 - total flux cleaned = -0.00510405 Jy ! Component: 3850 - total flux cleaned = -0.0049698 Jy ! Component: 3900 - total flux cleaned = -0.00486116 Jy ! Component: 3950 - total flux cleaned = -0.00472399 Jy ! Component: 4000 - total flux cleaned = -0.00464073 Jy ! Component: 4050 - total flux cleaned = -0.00455659 Jy ! Total flux subtracted in 4096 components = -0.00447146 Jy ! Clean residual min=-0.001847 max=0.001855 Jy/beam ! Clean residual mean=0.000004 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.190538 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 336 components and 0.190538 Jy ![Exited script file: muppet] wmap "J0204-3328_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 8.11 at 2.567 degrees (North through East) ! Clean map min=-0.0037451 max=0.10938 Jy/beam ! Writing clean map to FITS file: J0204-3328_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109375 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000544865 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.49448 1.49448 2.98896 5.97793 11.9559 23.9117 47.8234 95.6468 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 8.11 at 2.567 degrees (North through East) ! Clean map min=-0.0037451 max=0.10938 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0204-3328_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:35:12 2019