! Started logfile: J0204+4005_S_2017_06_10_pus_uvs.log on Mon May 6 14:42:20 2019 obs J0204+4005_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0204+4005_S_2017_06_10_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.923002 visibilities/baseline/integration-bin. ! Found source: J0204+4005 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 18940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0204+4005_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 593 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922182Jy sigma=0.009627 ! Fit after self-cal, rms=0.912009Jy sigma=0.009536 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=5.113 mas, bpa=-7.834 degrees ! Estimated noise=859.533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0694081 Jy ! Component: 100 - total flux cleaned = 0.084568 Jy ! Total flux subtracted in 100 components = 0.084568 Jy ! Clean residual min=-0.003331 max=0.004428 Jy/beam ! Clean residual mean=-0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.084568 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.084568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069693Jy sigma=0.000685 ! Fit after self-cal, rms=0.069689Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=5.835 mas, bpa=-4.032 degrees ! Estimated noise=555.169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499226 Jy ! Component: 100 - total flux cleaned = 0.0068368 Jy ! Component: 150 - total flux cleaned = 0.00729288 Jy ! Component: 200 - total flux cleaned = 0.00741858 Jy ! Total flux subtracted in 200 components = 0.00741858 Jy ! Clean residual min=-0.001977 max=0.001785 Jy/beam ! Clean residual mean=-0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0919865 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 21 components and 0.0919866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069345Jy sigma=0.000682 ! Fit after self-cal, rms=0.069349Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.95 KP 1.02 ! LA 1.02 MK 1.03 NL 0.88 OV 1.01 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.99 KP 0.97 ! LA 0.98 MK 1.04 NL 1.07 OV 1.12 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 0.98 KP 1.00 ! LA 0.98 MK 1.09 NL 1.01 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.93 KP 1.00* ! LA 1.01 MK 1.26 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.069349Jy sigma=0.000682 ! Fit after self-cal, rms=0.069108Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=5.834 mas, bpa=-3.302 degrees ! Estimated noise=555.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150334 Jy ! Component: 100 - total flux cleaned = 0.000244484 Jy ! Component: 150 - total flux cleaned = 0.000310985 Jy ! Component: 200 - total flux cleaned = 0.00037078 Jy ! Total flux subtracted in 200 components = 0.00037078 Jy ! Clean residual min=-0.001701 max=0.001584 Jy/beam ! Clean residual mean=-0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0923573 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0923574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069100Jy sigma=0.000678 ! Fit after self-cal, rms=0.069113Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069113Jy sigma=0.000678 ! Fit after self-cal, rms=0.069429Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=5.833 mas, bpa=-3.531 degrees ! Estimated noise=554.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11153e-05 Jy ! Component: 100 - total flux cleaned = 1.68853e-06 Jy ! Component: 150 - total flux cleaned = -1.29214e-05 Jy ! Component: 200 - total flux cleaned = -1.31137e-05 Jy ! Total flux subtracted in 200 components = -1.31137e-05 Jy ! Clean residual min=-0.001487 max=0.001529 Jy/beam ! Clean residual mean=-0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0923442 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0923442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069427Jy sigma=0.000674 ! Fit after self-cal, rms=0.069468Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134292 Jy ! Component: 100 - total flux cleaned = 0.00172767 Jy ! Component: 150 - total flux cleaned = 0.00189092 Jy ! Component: 200 - total flux cleaned = 0.00197606 Jy ! Total flux subtracted in 200 components = 0.00197606 Jy ! Clean residual min=-0.001366 max=0.001194 Jy/beam ! Clean residual mean=-0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0943203 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0943203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069439Jy sigma=0.000674 ! Fit after self-cal, rms=0.069437Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069437Jy sigma=0.000674 ! Fit after self-cal, rms=0.069505Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=5.833 mas, bpa=-3.379 degrees ! Estimated noise=553.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478756 Jy ! Component: 100 - total flux cleaned = 0.000639606 Jy ! Component: 150 - total flux cleaned = 0.000731133 Jy ! Component: 200 - total flux cleaned = 0.000765493 Jy ! Total flux subtracted in 200 components = 0.000765493 Jy ! Clean residual min=-0.001332 max=0.001216 Jy/beam ! Clean residual mean=-0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0950858 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0950858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069497Jy sigma=0.000674 ! Fit after self-cal, rms=0.069499Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179789 Jy ! Component: 100 - total flux cleaned = 0.000211688 Jy ! Component: 150 - total flux cleaned = 0.000221392 Jy ! Component: 200 - total flux cleaned = 0.000240041 Jy ! Total flux subtracted in 200 components = 0.000240041 Jy ! Clean residual min=-0.001312 max=0.001207 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0953258 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.0953258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069496Jy sigma=0.000674 ! Fit after self-cal, rms=0.069496Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069496Jy sigma=0.000674 ! Fit after self-cal, rms=0.069512Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.618 mas, bmaj=9.232 mas, bpa=1.591 degrees ! Estimated noise=685.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339975 Jy ! Component: 100 - total flux cleaned = 0.000382741 Jy ! Component: 150 - total flux cleaned = 0.000399457 Jy ! Component: 200 - total flux cleaned = 0.000413969 Jy ! Total flux subtracted in 200 components = 0.000413969 Jy ! Clean residual min=-0.001474 max=0.001388 Jy/beam ! Clean residual mean=-0.000006 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0957398 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.0957398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069513Jy sigma=0.000674 ! Fit after self-cal, rms=0.069514Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.74763e-05 Jy ! Component: 100 - total flux cleaned = 0.000101318 Jy ! Component: 150 - total flux cleaned = 0.000113376 Jy ! Component: 200 - total flux cleaned = 0.000118862 Jy ! Total flux subtracted in 200 components = 0.000118862 Jy ! Clean residual min=-0.001459 max=0.001375 Jy/beam ! Clean residual mean=-0.000006 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0958587 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.0958587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069514Jy sigma=0.000674 ! Fit after self-cal, rms=0.069514Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=5.835 mas, bpa=-3.358 degrees ! Estimated noise=553.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 5.835 at -3.358 degrees (North through East) ! Clean map min=-0.0012385 max=0.089884 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=5.109 mas, bpa=-7.242 degrees ! Estimated noise=865.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698339 Jy ! Component: 100 - total flux cleaned = 0.0850787 Jy ! Component: 150 - total flux cleaned = 0.0887324 Jy ! Component: 200 - total flux cleaned = 0.0905071 Jy ! Total flux subtracted in 200 components = 0.0905071 Jy ! Clean residual min=-0.002367 max=0.002281 Jy/beam ! Clean residual mean=-0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0905071 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0905071 Jy ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=5.835 mas, bpa=-3.358 degrees ! Estimated noise=553.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018224 Jy ! Component: 100 - total flux cleaned = 0.00281432 Jy ! Component: 150 - total flux cleaned = 0.00323036 Jy ! Component: 200 - total flux cleaned = 0.00360341 Jy ! Total flux subtracted in 200 components = 0.00360341 Jy ! Clean residual min=-0.001312 max=0.001228 Jy/beam ! Clean residual mean=-0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0941105 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.0941105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.618 mas, bmaj=9.232 mas, bpa=1.591 degrees ! Estimated noise=685.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692815 Jy ! Component: 100 - total flux cleaned = 0.00115353 Jy ! Component: 150 - total flux cleaned = 0.00136113 Jy ! Component: 200 - total flux cleaned = 0.0014408 Jy ! Total flux subtracted in 200 components = 0.0014408 Jy ! Clean residual min=-0.001416 max=0.001394 Jy/beam ! Clean residual mean=-0.000006 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0955513 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.11771e-05 Jy ! Component: 100 - total flux cleaned = 8.84085e-05 Jy ! Component: 150 - total flux cleaned = 0.000122157 Jy ! Component: 200 - total flux cleaned = 0.000137607 Jy ! Total flux subtracted in 200 components = 0.000137607 Jy ! Clean residual min=-0.001419 max=0.001389 Jy/beam ! Clean residual mean=-0.000006 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0956889 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.0956889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=5.835 mas, bpa=-3.358 degrees ! Estimated noise=553.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.60734e-05 Jy ! Component: 100 - total flux cleaned = -9.31358e-06 Jy ! Component: 150 - total flux cleaned = -2.45287e-05 Jy ! Component: 200 - total flux cleaned = -2.506e-05 Jy ! Total flux subtracted in 200 components = -2.506e-05 Jy ! Clean residual min=-0.001289 max=0.001225 Jy/beam ! Clean residual mean=-0.000003 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0956639 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.0956639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069520Jy sigma=0.000674 ! Fit after self-cal, rms=0.069517Jy sigma=0.000674 wmodel J0204+4005_S_2017_06_10_pus_map.mod ! Writing 78 model components to file: J0204+4005_S_2017_06_10_pus_map.mod wobs J0204+4005_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0204+4005_S_2017_06_10_pus_uvs.fits wwins J0204+4005_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0204+4005_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488269 Jy ! Component: 100 - total flux cleaned = -0.000784518 Jy ! Component: 150 - total flux cleaned = -0.00106914 Jy ! Component: 200 - total flux cleaned = -0.00128111 Jy ! Component: 250 - total flux cleaned = -0.00152877 Jy ! Component: 300 - total flux cleaned = -0.00175014 Jy ! Component: 350 - total flux cleaned = -0.00200529 Jy ! Component: 400 - total flux cleaned = -0.00217839 Jy ! Component: 450 - total flux cleaned = -0.00234802 Jy ! Component: 500 - total flux cleaned = -0.00238497 Jy ! Component: 550 - total flux cleaned = -0.00242155 Jy ! Component: 600 - total flux cleaned = -0.00251141 Jy ! Component: 650 - total flux cleaned = -0.00254657 Jy ! Component: 700 - total flux cleaned = -0.00254681 Jy ! Component: 750 - total flux cleaned = -0.00258104 Jy ! Component: 800 - total flux cleaned = -0.00256433 Jy ! Component: 850 - total flux cleaned = -0.00258083 Jy ! Component: 900 - total flux cleaned = -0.00259718 Jy ! Component: 950 - total flux cleaned = -0.00253246 Jy ! Component: 1000 - total flux cleaned = -0.00257993 Jy ! Component: 1050 - total flux cleaned = -0.00253327 Jy ! Component: 1100 - total flux cleaned = -0.00256425 Jy ! Component: 1150 - total flux cleaned = -0.00265587 Jy ! Component: 1200 - total flux cleaned = -0.00268601 Jy ! Component: 1250 - total flux cleaned = -0.00270106 Jy ! Component: 1300 - total flux cleaned = -0.00280425 Jy ! Component: 1350 - total flux cleaned = -0.00281886 Jy ! Component: 1400 - total flux cleaned = -0.00286215 Jy ! Component: 1450 - total flux cleaned = -0.00293351 Jy ! Component: 1500 - total flux cleaned = -0.0029478 Jy ! Component: 1550 - total flux cleaned = -0.00303149 Jy ! Component: 1600 - total flux cleaned = -0.00307266 Jy ! Component: 1650 - total flux cleaned = -0.00311361 Jy ! Component: 1700 - total flux cleaned = -0.00320804 Jy ! Component: 1750 - total flux cleaned = -0.00318109 Jy ! Component: 1800 - total flux cleaned = -0.00318134 Jy ! Component: 1850 - total flux cleaned = -0.00323415 Jy ! Component: 1900 - total flux cleaned = -0.00328632 Jy ! Component: 1950 - total flux cleaned = -0.00329936 Jy ! Component: 2000 - total flux cleaned = -0.00336313 Jy ! Component: 2050 - total flux cleaned = -0.00331252 Jy ! Component: 2100 - total flux cleaned = -0.00331251 Jy ! Component: 2150 - total flux cleaned = -0.00331247 Jy ! Component: 2200 - total flux cleaned = -0.00328772 Jy ! Component: 2250 - total flux cleaned = -0.00328761 Jy ! Component: 2300 - total flux cleaned = -0.00326344 Jy ! Component: 2350 - total flux cleaned = -0.00323938 Jy ! Component: 2400 - total flux cleaned = -0.00322757 Jy ! Component: 2450 - total flux cleaned = -0.00319201 Jy ! Component: 2500 - total flux cleaned = -0.0031921 Jy ! Component: 2550 - total flux cleaned = -0.0031571 Jy ! Component: 2600 - total flux cleaned = -0.00313398 Jy ! Component: 2650 - total flux cleaned = -0.00307663 Jy ! Component: 2700 - total flux cleaned = -0.00306528 Jy ! Component: 2750 - total flux cleaned = -0.00306533 Jy ! Component: 2800 - total flux cleaned = -0.00307649 Jy ! Component: 2850 - total flux cleaned = -0.00300964 Jy ! Component: 2900 - total flux cleaned = -0.00306484 Jy ! Component: 2950 - total flux cleaned = -0.0030321 Jy ! Component: 3000 - total flux cleaned = -0.00298854 Jy ! Component: 3050 - total flux cleaned = -0.00298853 Jy ! Component: 3100 - total flux cleaned = -0.00299924 Jy ! Component: 3150 - total flux cleaned = -0.00298851 Jy ! Component: 3200 - total flux cleaned = -0.00297797 Jy ! Component: 3250 - total flux cleaned = -0.00292532 Jy ! Component: 3300 - total flux cleaned = -0.00294641 Jy ! Component: 3350 - total flux cleaned = -0.00288389 Jy ! Component: 3400 - total flux cleaned = -0.00286324 Jy ! Component: 3450 - total flux cleaned = -0.00282211 Jy ! Component: 3500 - total flux cleaned = -0.0028221 Jy ! Component: 3550 - total flux cleaned = -0.00279159 Jy ! Component: 3600 - total flux cleaned = -0.00278156 Jy ! Component: 3650 - total flux cleaned = -0.00276152 Jy ! Component: 3700 - total flux cleaned = -0.00272168 Jy ! Component: 3750 - total flux cleaned = -0.00269198 Jy ! Component: 3800 - total flux cleaned = -0.00270186 Jy ! Component: 3850 - total flux cleaned = -0.002702 Jy ! Component: 3900 - total flux cleaned = -0.00266295 Jy ! Component: 3950 - total flux cleaned = -0.00268238 Jy ! Component: 4000 - total flux cleaned = -0.00262455 Jy ! Component: 4050 - total flux cleaned = -0.00260537 Jy ! Total flux subtracted in 4096 components = -0.00264353 Jy ! Clean residual min=-0.000565 max=0.000508 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.0930203 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 403 components and 0.0930203 Jy ![Exited script file: muppet] wmap "J0204+4005_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 5.835 at -3.358 degrees (North through East) ! Clean map min=-0.0010148 max=0.089912 Jy/beam ! Writing clean map to FITS file: J0204+4005_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0899123 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.584622 0.584622 1.16924 2.33849 4.67697 9.35395 18.7079 37.4158 74.8316 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 5.835 at -3.358 degrees (North through East) ! Clean map min=-0.0010148 max=0.089912 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0204+4005_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:42:26 2019