! Started logfile: J0203+7232_S_2017_05_27_pus_uvs.log on Fri May 3 10:55:07 2019 obs J0203+7232_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0203+7232_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0203+7232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0203+7232_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.513856Jy sigma=0.004181 ! Fit after self-cal, rms=0.511217Jy sigma=0.004159 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=10.11 mas, bpa=85.18 degrees ! Estimated noise=3250.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.383744 Jy ! Component: 100 - total flux cleaned = 0.467454 Jy ! Total flux subtracted in 100 components = 0.467454 Jy ! Clean residual min=-0.013860 max=0.023561 Jy/beam ! Clean residual mean=-0.000023 rms=0.004199 Jy/beam ! Combined flux in latest and established models = 0.467454 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.467454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097003Jy sigma=0.000754 ! Fit after self-cal, rms=0.097001Jy sigma=0.000754 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=11.12 mas, bpa=84.93 degrees ! Estimated noise=2793.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253789 Jy ! Component: 100 - total flux cleaned = 0.0371467 Jy ! Component: 150 - total flux cleaned = 0.0402371 Jy ! Component: 200 - total flux cleaned = 0.0409416 Jy ! Total flux subtracted in 200 components = 0.0409416 Jy ! Clean residual min=-0.009522 max=0.010867 Jy/beam ! Clean residual mean=-0.000007 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 0.508395 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 39 components and 0.508395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089921Jy sigma=0.000703 ! Fit after self-cal, rms=0.089904Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.02 KP 1.02 ! LA 1.01 MK 1.02 NL 0.90 OV 1.01 ! PT 1.05 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.06 KP 0.97 ! LA 0.93 MK 1.02 NL 1.03 OV 1.04 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.04 KP 0.97 ! LA 0.97 MK 1.06 NL 0.96 OV 0.95 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.98 KP 1.00* ! LA 1.17 MK 0.96 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.089904Jy sigma=0.000703 ! Fit after self-cal, rms=0.084267Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=11.17 mas, bpa=84.93 degrees ! Estimated noise=2783.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191068 Jy ! Component: 100 - total flux cleaned = 0.00183457 Jy ! Component: 150 - total flux cleaned = 0.00190115 Jy ! Component: 200 - total flux cleaned = 0.00190167 Jy ! Total flux subtracted in 200 components = 0.00190167 Jy ! Clean residual min=-0.007194 max=0.007101 Jy/beam ! Clean residual mean=-0.000005 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.510297 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.510297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084054Jy sigma=0.000657 ! Fit after self-cal, rms=0.084019Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084019Jy sigma=0.000656 ! Fit after self-cal, rms=0.084109Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=11.17 mas, bpa=84.9 degrees ! Estimated noise=2785.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000469965 Jy ! Component: 100 - total flux cleaned = 0.000404616 Jy ! Component: 150 - total flux cleaned = 0.0005426 Jy ! Component: 200 - total flux cleaned = 0.000584574 Jy ! Total flux subtracted in 200 components = 0.000584574 Jy ! Clean residual min=-0.007225 max=0.006610 Jy/beam ! Clean residual mean=-0.000005 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 0.510882 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.510882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084027Jy sigma=0.000656 ! Fit after self-cal, rms=0.084025Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.52272e-05 Jy ! Component: 100 - total flux cleaned = 4.17083e-05 Jy ! Component: 150 - total flux cleaned = 7.64706e-05 Jy ! Component: 200 - total flux cleaned = 0.000142038 Jy ! Total flux subtracted in 200 components = 0.000142038 Jy ! Clean residual min=-0.007154 max=0.006515 Jy/beam ! Clean residual mean=-0.000005 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.511024 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.511024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083981Jy sigma=0.000655 ! Fit after self-cal, rms=0.083982Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083982Jy sigma=0.000655 ! Fit after self-cal, rms=0.084025Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=11.17 mas, bpa=84.89 degrees ! Estimated noise=2786.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267 Jy ! Component: 100 - total flux cleaned = 0.000374838 Jy ! Component: 150 - total flux cleaned = 0.000404072 Jy ! Component: 200 - total flux cleaned = 0.000403248 Jy ! Total flux subtracted in 200 components = 0.000403248 Jy ! Clean residual min=-0.007144 max=0.006447 Jy/beam ! Clean residual mean=-0.000005 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 0.511427 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.511427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083995Jy sigma=0.000655 ! Fit after self-cal, rms=0.083996Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.29295e-05 Jy ! Component: 100 - total flux cleaned = 4.56875e-06 Jy ! Component: 150 - total flux cleaned = 4.70843e-06 Jy ! Component: 200 - total flux cleaned = -4.86506e-05 Jy ! Total flux subtracted in 200 components = -4.86506e-05 Jy ! Clean residual min=-0.007115 max=0.006409 Jy/beam ! Clean residual mean=-0.000005 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.511378 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.511378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083972Jy sigma=0.000655 ! Fit after self-cal, rms=0.083973Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083973Jy sigma=0.000655 ! Fit after self-cal, rms=0.084020Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.233 mas, bmaj=13.44 mas, bpa=84.11 degrees ! Estimated noise=3388.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656151 Jy ! Component: 100 - total flux cleaned = -0.00076566 Jy ! Component: 150 - total flux cleaned = -0.000922831 Jy ! Component: 200 - total flux cleaned = -0.0010155 Jy ! Total flux subtracted in 200 components = -0.0010155 Jy ! Clean residual min=-0.007936 max=0.007058 Jy/beam ! Clean residual mean=-0.000012 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.510363 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.510363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084063Jy sigma=0.000655 ! Fit after self-cal, rms=0.084050Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155612 Jy ! Component: 100 - total flux cleaned = -0.000101145 Jy ! Component: 150 - total flux cleaned = -0.000124926 Jy ! Component: 200 - total flux cleaned = -0.0001264 Jy ! Total flux subtracted in 200 components = -0.0001264 Jy ! Clean residual min=-0.007941 max=0.007043 Jy/beam ! Clean residual mean=-0.000013 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.510236 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.510236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084075Jy sigma=0.000655 ! Fit after self-cal, rms=0.084074Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=11.17 mas, bpa=84.89 degrees ! Estimated noise=2787.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.266 x 11.17 at 84.89 degrees (North through East) ! Clean map min=-0.006435 max=0.49573 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=10.19 mas, bpa=85.15 degrees ! Estimated noise=3252.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.384026 Jy ! Component: 100 - total flux cleaned = 0.467841 Jy ! Component: 150 - total flux cleaned = 0.488708 Jy ! Component: 200 - total flux cleaned = 0.499317 Jy ! Total flux subtracted in 200 components = 0.499317 Jy ! Clean residual min=-0.007866 max=0.008590 Jy/beam ! Clean residual mean=-0.000008 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.499317 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.499317 Jy ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=11.17 mas, bpa=84.89 degrees ! Estimated noise=2787.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764212 Jy ! Component: 100 - total flux cleaned = 0.0116596 Jy ! Component: 150 - total flux cleaned = 0.0127211 Jy ! Component: 200 - total flux cleaned = 0.0131981 Jy ! Total flux subtracted in 200 components = 0.0131981 Jy ! Clean residual min=-0.007229 max=0.006816 Jy/beam ! Clean residual mean=-0.000004 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.512515 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.512515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.233 mas, bmaj=13.44 mas, bpa=84.11 degrees ! Estimated noise=3388.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172691 Jy ! Component: 100 - total flux cleaned = -0.00179627 Jy ! Component: 150 - total flux cleaned = -0.00173757 Jy ! Component: 200 - total flux cleaned = -0.00168922 Jy ! Total flux subtracted in 200 components = -0.00168922 Jy ! Clean residual min=-0.008203 max=0.007172 Jy/beam ! Clean residual mean=-0.000012 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 0.510826 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.6648e-05 Jy ! Component: 100 - total flux cleaned = -8.68913e-05 Jy ! Component: 150 - total flux cleaned = -0.000124448 Jy ! Component: 200 - total flux cleaned = -0.000157877 Jy ! Total flux subtracted in 200 components = -0.000157877 Jy ! Clean residual min=-0.007995 max=0.007163 Jy/beam ! Clean residual mean=-0.000012 rms=0.002301 Jy/beam ! Combined flux in latest and established models = 0.510668 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.510668 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=11.17 mas, bpa=84.89 degrees ! Estimated noise=2787.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122598 Jy ! Component: 100 - total flux cleaned = 0.0012218 Jy ! Component: 150 - total flux cleaned = 0.00134054 Jy ! Component: 200 - total flux cleaned = 0.00143521 Jy ! Total flux subtracted in 200 components = 0.00143521 Jy ! Clean residual min=-0.007128 max=0.006459 Jy/beam ! Clean residual mean=-0.000004 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.512103 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.512103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084126Jy sigma=0.000655 ! Fit after self-cal, rms=0.084119Jy sigma=0.000655 wmodel J0203+7232_S_2017_05_27_pus_map.mod ! Writing 75 model components to file: J0203+7232_S_2017_05_27_pus_map.mod wobs J0203+7232_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0203+7232_S_2017_05_27_pus_uvs.fits wwins J0203+7232_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0203+7232_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140576 Jy ! Component: 100 - total flux cleaned = -0.000753858 Jy ! Component: 150 - total flux cleaned = -0.000241863 Jy ! Component: 200 - total flux cleaned = 0.00024684 Jy ! Component: 250 - total flux cleaned = 0.000710782 Jy ! Component: 300 - total flux cleaned = 0.000711445 Jy ! Component: 350 - total flux cleaned = 0.000883469 Jy ! Component: 400 - total flux cleaned = 0.00128872 Jy ! Component: 450 - total flux cleaned = 0.0012901 Jy ! Component: 500 - total flux cleaned = 0.00166598 Jy ! Component: 550 - total flux cleaned = 0.00209976 Jy ! Component: 600 - total flux cleaned = 0.00230683 Jy ! Component: 650 - total flux cleaned = 0.00243919 Jy ! Component: 700 - total flux cleaned = 0.0025016 Jy ! Component: 750 - total flux cleaned = 0.00256492 Jy ! Component: 800 - total flux cleaned = 0.00262693 Jy ! Component: 850 - total flux cleaned = 0.00268792 Jy ! Component: 900 - total flux cleaned = 0.00274802 Jy ! Component: 950 - total flux cleaned = 0.00303715 Jy ! Component: 1000 - total flux cleaned = 0.00314847 Jy ! Component: 1050 - total flux cleaned = 0.00292844 Jy ! Component: 1100 - total flux cleaned = 0.00309073 Jy ! Component: 1150 - total flux cleaned = 0.00298442 Jy ! Component: 1200 - total flux cleaned = 0.00288043 Jy ! Component: 1250 - total flux cleaned = 0.00272917 Jy ! Component: 1300 - total flux cleaned = 0.00287772 Jy ! Component: 1350 - total flux cleaned = 0.0024854 Jy ! Component: 1400 - total flux cleaned = 0.00234134 Jy ! Component: 1450 - total flux cleaned = 0.00210519 Jy ! Component: 1500 - total flux cleaned = 0.0020124 Jy ! Component: 1550 - total flux cleaned = 0.00182977 Jy ! Component: 1600 - total flux cleaned = 0.0016959 Jy ! Component: 1650 - total flux cleaned = 0.00147695 Jy ! Component: 1700 - total flux cleaned = 0.00134808 Jy ! Component: 1750 - total flux cleaned = 0.00117831 Jy ! Component: 1800 - total flux cleaned = 0.00109535 Jy ! Component: 1850 - total flux cleaned = 0.000890895 Jy ! Component: 1900 - total flux cleaned = 0.000810271 Jy ! Component: 1950 - total flux cleaned = 0.000610824 Jy ! Component: 2000 - total flux cleaned = 0.000338467 Jy ! Component: 2050 - total flux cleaned = 0.000145971 Jy ! Component: 2100 - total flux cleaned = -0.000195965 Jy ! Component: 2150 - total flux cleaned = -0.000495021 Jy ! Component: 2200 - total flux cleaned = -0.000679872 Jy ! Component: 2250 - total flux cleaned = -0.000971482 Jy ! Component: 2300 - total flux cleaned = -0.00118775 Jy ! Component: 2350 - total flux cleaned = -0.00143679 Jy ! Component: 2400 - total flux cleaned = -0.00164818 Jy ! Component: 2450 - total flux cleaned = -0.00192635 Jy ! Component: 2500 - total flux cleaned = -0.00216725 Jy ! Component: 2550 - total flux cleaned = -0.00250738 Jy ! Component: 2600 - total flux cleaned = -0.00260848 Jy ! Component: 2650 - total flux cleaned = -0.00287578 Jy ! Component: 2700 - total flux cleaned = -0.00307462 Jy ! Component: 2750 - total flux cleaned = -0.00323866 Jy ! Component: 2800 - total flux cleaned = -0.00346645 Jy ! Component: 2850 - total flux cleaned = -0.0036921 Jy ! Component: 2900 - total flux cleaned = -0.00388417 Jy ! Component: 2950 - total flux cleaned = -0.00401126 Jy ! Component: 3000 - total flux cleaned = -0.00426352 Jy ! Component: 3050 - total flux cleaned = -0.00441988 Jy ! Component: 3100 - total flux cleaned = -0.004544 Jy ! Component: 3150 - total flux cleaned = -0.00463677 Jy ! Component: 3200 - total flux cleaned = -0.00482155 Jy ! Component: 3250 - total flux cleaned = -0.00497444 Jy ! Component: 3300 - total flux cleaned = -0.00509581 Jy ! Component: 3350 - total flux cleaned = -0.00524678 Jy ! Component: 3400 - total flux cleaned = -0.00536695 Jy ! Component: 3450 - total flux cleaned = -0.00545648 Jy ! Component: 3500 - total flux cleaned = -0.00548633 Jy ! Component: 3550 - total flux cleaned = -0.00560522 Jy ! Component: 3600 - total flux cleaned = -0.00572355 Jy ! Component: 3650 - total flux cleaned = -0.00587084 Jy ! Component: 3700 - total flux cleaned = -0.00595909 Jy ! Component: 3750 - total flux cleaned = -0.00604719 Jy ! Component: 3800 - total flux cleaned = -0.0061936 Jy ! Component: 3850 - total flux cleaned = -0.00631054 Jy ! Component: 3900 - total flux cleaned = -0.00648557 Jy ! Component: 3950 - total flux cleaned = -0.00663129 Jy ! Component: 4000 - total flux cleaned = -0.00674799 Jy ! Component: 4050 - total flux cleaned = -0.00692305 Jy ! Total flux subtracted in 4096 components = -0.00701073 Jy ! Clean residual min=-0.001767 max=0.001855 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.505092 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 379 components and 0.505092 Jy ![Exited script file: muppet] wmap "J0203+7232_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.266 x 11.17 at 84.89 degrees (North through East) ! Clean map min=-0.0056203 max=0.49557 Jy/beam ! Writing clean map to FITS file: J0203+7232_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.49557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000526775 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.31889 0.31889 0.637781 1.27556 2.55112 5.10225 10.2045 20.409 40.818 81.636 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.495 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.266 x 11.17 at 84.89 degrees (North through East) ! Clean map min=-0.0056203 max=0.49557 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0203+7232_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:55:12 2019