! Started logfile: J0203+7232_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:29:20 2019 obs J0203+7232_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0203+7232_S_2017_03_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683333 visibilities/baseline/integration-bin. ! Found source: J0203+7232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0203+7232_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.669292Jy sigma=0.004903 ! Fit after self-cal, rms=0.665281Jy sigma=0.004874 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=10.29 mas, bpa=37.31 degrees ! Estimated noise=4490.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258124 Jy ! Component: 100 - total flux cleaned = 0.315342 Jy ! Total flux subtracted in 100 components = 0.315342 Jy ! Clean residual min=-0.014469 max=0.021242 Jy/beam ! Clean residual mean=-0.000046 rms=0.004572 Jy/beam ! Combined flux in latest and established models = 0.315342 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.315342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103932Jy sigma=0.000750 ! Fit after self-cal, rms=0.103913Jy sigma=0.000750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=11.54 mas, bpa=37.5 degrees ! Estimated noise=3611.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281153 Jy ! Component: 100 - total flux cleaned = 0.0402737 Jy ! Component: 150 - total flux cleaned = 0.0450579 Jy ! Component: 200 - total flux cleaned = 0.0459128 Jy ! Total flux subtracted in 200 components = 0.0459128 Jy ! Clean residual min=-0.008784 max=0.010675 Jy/beam ! Clean residual mean=-0.000044 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 0.361255 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.361255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096892Jy sigma=0.000700 ! Fit after self-cal, rms=0.096854Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.94 KP 1.19 ! LA 0.98 MK 0.99 NL 0.97 OV 1.02 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.02 KP 1.00* ! LA 0.97 MK 1.08 NL 1.01 OV 1.04 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 0.99 KP 1.00* ! LA 0.97 MK 1.00 NL 0.99 OV 1.02 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.06 KP 1.00* ! LA 1.10 MK 0.96 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.096854Jy sigma=0.000699 ! Fit after self-cal, rms=0.093129Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=11.53 mas, bpa=37.43 degrees ! Estimated noise=3599.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (52.5, -66). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0080543 Jy ! Component: 100 - total flux cleaned = 0.00910883 Jy ! Component: 150 - total flux cleaned = 0.00983725 Jy ! Component: 200 - total flux cleaned = 0.0104677 Jy ! Total flux subtracted in 200 components = 0.0104677 Jy ! Clean residual min=-0.006177 max=0.006606 Jy/beam ! Clean residual mean=0.000016 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.371723 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 0.371723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092147Jy sigma=0.000669 ! Fit after self-cal, rms=0.092139Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092139Jy sigma=0.000669 ! Fit after self-cal, rms=0.091798Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=11.53 mas, bpa=37.42 degrees ! Estimated noise=3589.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601998 Jy ! Component: 100 - total flux cleaned = 0.000710195 Jy ! Component: 150 - total flux cleaned = 0.000907187 Jy ! Component: 200 - total flux cleaned = 0.000997795 Jy ! Total flux subtracted in 200 components = 0.000997795 Jy ! Clean residual min=-0.006010 max=0.006197 Jy/beam ! Clean residual mean=0.000015 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.37272 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.37272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091570Jy sigma=0.000667 ! Fit after self-cal, rms=0.091565Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223882 Jy ! Component: 100 - total flux cleaned = -0.000143147 Jy ! Component: 150 - total flux cleaned = 0.000164811 Jy ! Component: 200 - total flux cleaned = 0.000384207 Jy ! Total flux subtracted in 200 components = 0.000384207 Jy ! Clean residual min=-0.006009 max=0.006167 Jy/beam ! Clean residual mean=0.000015 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.373105 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.373105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091438Jy sigma=0.000666 ! Fit after self-cal, rms=0.091438Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091438Jy sigma=0.000666 ! Fit after self-cal, rms=0.091278Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=11.53 mas, bpa=37.41 degrees ! Estimated noise=3584.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609892 Jy ! Component: 100 - total flux cleaned = 0.000835599 Jy ! Component: 150 - total flux cleaned = 0.00104356 Jy ! Component: 200 - total flux cleaned = 0.00117387 Jy ! Total flux subtracted in 200 components = 0.00117387 Jy ! Clean residual min=-0.005929 max=0.005920 Jy/beam ! Clean residual mean=0.000015 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.374278 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.374278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091176Jy sigma=0.000665 ! Fit after self-cal, rms=0.091176Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89046e-05 Jy ! Component: 100 - total flux cleaned = 0.000236996 Jy ! Component: 150 - total flux cleaned = 0.000408533 Jy ! Component: 200 - total flux cleaned = 0.000626448 Jy ! Total flux subtracted in 200 components = 0.000626448 Jy ! Clean residual min=-0.005915 max=0.005874 Jy/beam ! Clean residual mean=0.000015 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.374905 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.374905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091108Jy sigma=0.000665 ! Fit after self-cal, rms=0.091110Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091110Jy sigma=0.000665 ! Fit after self-cal, rms=0.091063Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.799 mas, bmaj=17 mas, bpa=27.81 degrees ! Estimated noise=4358.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430864 Jy ! Component: 100 - total flux cleaned = 0.000738578 Jy ! Component: 150 - total flux cleaned = 0.000878277 Jy ! Component: 200 - total flux cleaned = 0.00100976 Jy ! Total flux subtracted in 200 components = 0.00100976 Jy ! Clean residual min=-0.004824 max=0.005102 Jy/beam ! Clean residual mean=0.000027 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.375915 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.375915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091039Jy sigma=0.000665 ! Fit after self-cal, rms=0.091038Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.75824e-05 Jy ! Component: 100 - total flux cleaned = 0.000148011 Jy ! Component: 150 - total flux cleaned = 0.000234503 Jy ! Component: 200 - total flux cleaned = 0.000288449 Jy ! Total flux subtracted in 200 components = 0.000288449 Jy ! Clean residual min=-0.004905 max=0.005059 Jy/beam ! Clean residual mean=0.000027 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.376203 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.376203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091026Jy sigma=0.000664 ! Fit after self-cal, rms=0.091026Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=11.52 mas, bpa=37.39 degrees ! Estimated noise=3582.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 11.52 at 37.39 degrees (North through East) ! Clean map min=-0.0059959 max=0.33705 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=10.27 mas, bpa=37.2 degrees ! Estimated noise=4488.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257469 Jy ! Component: 100 - total flux cleaned = 0.314869 Jy ! Component: 150 - total flux cleaned = 0.336323 Jy ! Component: 200 - total flux cleaned = 0.34896 Jy ! Total flux subtracted in 200 components = 0.34896 Jy ! Clean residual min=-0.012292 max=0.010329 Jy/beam ! Clean residual mean=-0.000000 rms=0.002950 Jy/beam ! Combined flux in latest and established models = 0.34896 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.34896 Jy ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=11.52 mas, bpa=37.39 degrees ! Estimated noise=3582.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010997 Jy ! Component: 100 - total flux cleaned = 0.0157774 Jy ! Component: 150 - total flux cleaned = 0.0190034 Jy ! Component: 200 - total flux cleaned = 0.0207527 Jy ! Total flux subtracted in 200 components = 0.0207527 Jy ! Clean residual min=-0.006383 max=0.006783 Jy/beam ! Clean residual mean=0.000011 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.369713 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.369713 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.799 mas, bmaj=17 mas, bpa=27.81 degrees ! Estimated noise=4358.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401842 Jy ! Component: 100 - total flux cleaned = 0.0053441 Jy ! Component: 150 - total flux cleaned = 0.00567089 Jy ! Component: 200 - total flux cleaned = 0.00595876 Jy ! Total flux subtracted in 200 components = 0.00595876 Jy ! Clean residual min=-0.004665 max=0.005544 Jy/beam ! Clean residual mean=0.000025 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.375671 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315204 Jy ! Component: 100 - total flux cleaned = 0.000426071 Jy ! Component: 150 - total flux cleaned = 0.000425252 Jy ! Component: 200 - total flux cleaned = 0.000521522 Jy ! Total flux subtracted in 200 components = 0.000521522 Jy ! Clean residual min=-0.004615 max=0.005441 Jy/beam ! Clean residual mean=0.000026 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.376193 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 103 components and 0.376193 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=11.52 mas, bpa=37.39 degrees ! Estimated noise=3582.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.50722e-05 Jy ! Component: 100 - total flux cleaned = -6.19798e-05 Jy ! Component: 150 - total flux cleaned = -0.000164748 Jy ! Component: 200 - total flux cleaned = 2.22697e-05 Jy ! Total flux subtracted in 200 components = 2.22697e-05 Jy ! Clean residual min=-0.005788 max=0.006395 Jy/beam ! Clean residual mean=0.000013 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.376215 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.376215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091256Jy sigma=0.000666 ! Fit after self-cal, rms=0.091235Jy sigma=0.000666 wmodel J0203+7232_S_2017_03_27_pus_map.mod ! Writing 122 model components to file: J0203+7232_S_2017_03_27_pus_map.mod wobs J0203+7232_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0203+7232_S_2017_03_27_pus_uvs.fits wwins J0203+7232_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J0203+7232_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011327 Jy ! Component: 100 - total flux cleaned = 0.00238152 Jy ! Component: 150 - total flux cleaned = 0.0030074 Jy ! Component: 200 - total flux cleaned = 0.00342189 Jy ! Component: 250 - total flux cleaned = 0.00389334 Jy ! Component: 300 - total flux cleaned = 0.00396896 Jy ! Component: 350 - total flux cleaned = 0.00396928 Jy ! Component: 400 - total flux cleaned = 0.0038324 Jy ! Component: 450 - total flux cleaned = 0.00356329 Jy ! Component: 500 - total flux cleaned = 0.00310744 Jy ! Component: 550 - total flux cleaned = 0.00304365 Jy ! Component: 600 - total flux cleaned = 0.00267335 Jy ! Component: 650 - total flux cleaned = 0.00237427 Jy ! Component: 700 - total flux cleaned = 0.00237503 Jy ! Component: 750 - total flux cleaned = 0.00237454 Jy ! Component: 800 - total flux cleaned = 0.00220654 Jy ! Component: 850 - total flux cleaned = 0.0019889 Jy ! Component: 900 - total flux cleaned = 0.0019889 Jy ! Component: 950 - total flux cleaned = 0.0019354 Jy ! Component: 1000 - total flux cleaned = 0.00183164 Jy ! Component: 1050 - total flux cleaned = 0.00178125 Jy ! Component: 1100 - total flux cleaned = 0.00183123 Jy ! Component: 1150 - total flux cleaned = 0.001928 Jy ! Component: 1200 - total flux cleaned = 0.00197554 Jy ! Component: 1250 - total flux cleaned = 0.00202235 Jy ! Component: 1300 - total flux cleaned = 0.00211491 Jy ! Component: 1350 - total flux cleaned = 0.00211492 Jy ! Component: 1400 - total flux cleaned = 0.002206 Jy ! Component: 1450 - total flux cleaned = 0.00225109 Jy ! Component: 1500 - total flux cleaned = 0.00229576 Jy ! Component: 1550 - total flux cleaned = 0.00238345 Jy ! Component: 1600 - total flux cleaned = 0.00242653 Jy ! Component: 1650 - total flux cleaned = 0.00255426 Jy ! Component: 1700 - total flux cleaned = 0.00251204 Jy ! Component: 1750 - total flux cleaned = 0.00263705 Jy ! Component: 1800 - total flux cleaned = 0.00271959 Jy ! Component: 1850 - total flux cleaned = 0.00276075 Jy ! Component: 1900 - total flux cleaned = 0.00280115 Jy ! Component: 1950 - total flux cleaned = 0.00284115 Jy ! Component: 2000 - total flux cleaned = 0.00280113 Jy ! Component: 2050 - total flux cleaned = 0.00287995 Jy ! Component: 2100 - total flux cleaned = 0.00295821 Jy ! Component: 2150 - total flux cleaned = 0.00303618 Jy ! Component: 2200 - total flux cleaned = 0.00307491 Jy ! Component: 2250 - total flux cleaned = 0.00307485 Jy ! Component: 2300 - total flux cleaned = 0.00295889 Jy ! Component: 2350 - total flux cleaned = 0.00295876 Jy ! Component: 2400 - total flux cleaned = 0.00284294 Jy ! Component: 2450 - total flux cleaned = 0.00276581 Jy ! Component: 2500 - total flux cleaned = 0.00276566 Jy ! Component: 2550 - total flux cleaned = 0.00272685 Jy ! Component: 2600 - total flux cleaned = 0.0027266 Jy ! Component: 2650 - total flux cleaned = 0.00268779 Jy ! Component: 2700 - total flux cleaned = 0.00264863 Jy ! Component: 2750 - total flux cleaned = 0.00253122 Jy ! Component: 2800 - total flux cleaned = 0.00249204 Jy ! Component: 2850 - total flux cleaned = 0.00237296 Jy ! Component: 2900 - total flux cleaned = 0.0022532 Jy ! Component: 2950 - total flux cleaned = 0.00217254 Jy ! Component: 3000 - total flux cleaned = 0.00209155 Jy ! Component: 3050 - total flux cleaned = 0.00196896 Jy ! Component: 3100 - total flux cleaned = 0.00184532 Jy ! Component: 3150 - total flux cleaned = 0.00180355 Jy ! Component: 3200 - total flux cleaned = 0.0017194 Jy ! Component: 3250 - total flux cleaned = 0.00159224 Jy ! Component: 3300 - total flux cleaned = 0.00154923 Jy ! Component: 3350 - total flux cleaned = 0.00146173 Jy ! Component: 3400 - total flux cleaned = 0.00137361 Jy ! Component: 3450 - total flux cleaned = 0.00128402 Jy ! Component: 3500 - total flux cleaned = 0.00119314 Jy ! Component: 3550 - total flux cleaned = 0.00119293 Jy ! Component: 3600 - total flux cleaned = 0.00109972 Jy ! Component: 3650 - total flux cleaned = 0.00105184 Jy ! Component: 3700 - total flux cleaned = 0.00100402 Jy ! Component: 3750 - total flux cleaned = 0.000955706 Jy ! Component: 3800 - total flux cleaned = 0.000857303 Jy ! Component: 3850 - total flux cleaned = 0.000807322 Jy ! Component: 3900 - total flux cleaned = 0.000756698 Jy ! Component: 3950 - total flux cleaned = 0.0007045 Jy ! Component: 4000 - total flux cleaned = 0.000650775 Jy ! Component: 4050 - total flux cleaned = 0.000597126 Jy ! Total flux subtracted in 4096 components = 0.000541946 Jy ! Clean residual min=-0.003640 max=0.003862 Jy/beam ! Clean residual mean=-0.000028 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.376757 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 368 components and 0.376757 Jy ![Exited script file: muppet] wmap "J0203+7232_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 11.52 at 37.39 degrees (North through East) ! Clean map min=-0.005923 max=0.33682 Jy/beam ! Writing clean map to FITS file: J0203+7232_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.336824 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000871687 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.776387 0.776387 1.55277 3.10555 6.2111 12.4222 24.8444 49.6888 99.3776 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.336 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 11.52 at 37.39 degrees (North through East) ! Clean map min=-0.005923 max=0.33682 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0203+7232_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:29:25 2019