! Started logfile: J0200+0322_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:02:00 2019 obs J0200+0322_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0200+0322_S_2017_01_16_pus_uva.fits ! AN table 1: 107 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.600623 visibilities/baseline/integration-bin. ! Found source: J0200+0322 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0200+0322_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 466 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.771954Jy sigma=0.005629 ! Fit after self-cal, rms=0.762427Jy sigma=0.005579 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=9.311 mas, bpa=18.35 degrees ! Estimated noise=1436.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197988 Jy ! Component: 100 - total flux cleaned = 0.241162 Jy ! Total flux subtracted in 100 components = 0.241162 Jy ! Clean residual min=-0.008570 max=0.012045 Jy/beam ! Clean residual mean=0.000005 rms=0.002238 Jy/beam ! Combined flux in latest and established models = 0.241162 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.241162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155865Jy sigma=0.000722 ! Fit after self-cal, rms=0.155859Jy sigma=0.000722 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.358 mas, bmaj=9.93 mas, bpa=17.87 degrees ! Estimated noise=957.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134522 Jy ! Component: 100 - total flux cleaned = 0.0204131 Jy ! Component: 150 - total flux cleaned = 0.0241904 Jy ! Component: 200 - total flux cleaned = 0.026284 Jy ! Total flux subtracted in 200 components = 0.026284 Jy ! Clean residual min=-0.006237 max=0.008131 Jy/beam ! Clean residual mean=0.000010 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.267446 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.267446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154966Jy sigma=0.000706 ! Fit after self-cal, rms=0.154990Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.91 HN 0.96 KP 0.96 ! LA 1.03 MK 1.00* NL 0.96 OV 0.98 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.02 KP 0.93 ! LA 0.99 MK 1.00* NL 1.08 OV 1.00 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.98 KP 1.00 ! LA 0.98 MK 1.00* NL 1.04 OV 0.92 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.98 KP 0.73 ! LA 1.12 MK 1.00* NL 1.00* OV 0.93 ! PT 1.01 SC 1.20 ! ! ! Fit before self-cal, rms=0.154990Jy sigma=0.000706 ! Fit after self-cal, rms=0.160041Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.361 mas, bmaj=9.926 mas, bpa=17.49 degrees ! Estimated noise=950.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00228627 Jy ! Component: 100 - total flux cleaned = -0.00346896 Jy ! Component: 150 - total flux cleaned = -0.00370561 Jy ! Component: 200 - total flux cleaned = -0.00381328 Jy ! Total flux subtracted in 200 components = -0.00381328 Jy ! Clean residual min=-0.005895 max=0.006126 Jy/beam ! Clean residual mean=-0.000005 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.263633 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.263633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159994Jy sigma=0.000693 ! Fit after self-cal, rms=0.160209Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160209Jy sigma=0.000693 ! Fit after self-cal, rms=0.151514Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.353 mas, bmaj=9.897 mas, bpa=17.41 degrees ! Estimated noise=951.121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160205 Jy ! Component: 100 - total flux cleaned = -0.000164552 Jy ! Component: 150 - total flux cleaned = -0.000115302 Jy ! Component: 200 - total flux cleaned = -5.51441e-05 Jy ! Total flux subtracted in 200 components = -5.51441e-05 Jy ! Clean residual min=-0.002370 max=0.002095 Jy/beam ! Clean residual mean=0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.263578 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.263578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151500Jy sigma=0.000657 ! Fit after self-cal, rms=0.151785Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.95846e-05 Jy ! Component: 100 - total flux cleaned = 3.16337e-05 Jy ! Component: 150 - total flux cleaned = 3.16941e-05 Jy ! Component: 200 - total flux cleaned = 3.1926e-05 Jy ! Total flux subtracted in 200 components = 3.1926e-05 Jy ! Clean residual min=-0.002429 max=0.002100 Jy/beam ! Clean residual mean=0.000005 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.26361 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.26361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151780Jy sigma=0.000657 ! Fit after self-cal, rms=0.151780Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151780Jy sigma=0.000657 ! Fit after self-cal, rms=0.148014Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.349 mas, bmaj=9.888 mas, bpa=17.39 degrees ! Estimated noise=950.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252744 Jy ! Component: 100 - total flux cleaned = -0.000255244 Jy ! Component: 150 - total flux cleaned = -0.000238179 Jy ! Component: 200 - total flux cleaned = -0.000194194 Jy ! Total flux subtracted in 200 components = -0.000194194 Jy ! Clean residual min=-0.002402 max=0.002066 Jy/beam ! Clean residual mean=0.000009 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.263416 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.263416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148006Jy sigma=0.000656 ! Fit after self-cal, rms=0.148007Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.19229e-06 Jy ! Component: 100 - total flux cleaned = 2.88541e-05 Jy ! Component: 150 - total flux cleaned = 2.89771e-05 Jy ! Component: 200 - total flux cleaned = 1.80884e-05 Jy ! Total flux subtracted in 200 components = 1.80884e-05 Jy ! Clean residual min=-0.002428 max=0.002060 Jy/beam ! Clean residual mean=0.000009 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.263434 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.263434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148004Jy sigma=0.000656 ! Fit after self-cal, rms=0.148004Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148004Jy sigma=0.000656 ! Fit after self-cal, rms=0.147765Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.052 mas, bmaj=12.09 mas, bpa=9.107 degrees ! Estimated noise=1098.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118125 Jy ! Component: 100 - total flux cleaned = 0.000105697 Jy ! Component: 150 - total flux cleaned = 8.40411e-05 Jy ! Component: 200 - total flux cleaned = 6.4129e-05 Jy ! Total flux subtracted in 200 components = 6.4129e-05 Jy ! Clean residual min=-0.002641 max=0.002424 Jy/beam ! Clean residual mean=0.000015 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.263498 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 0.263498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147760Jy sigma=0.000656 ! Fit after self-cal, rms=0.147761Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.77102e-06 Jy ! Component: 100 - total flux cleaned = -2.5476e-05 Jy ! Component: 150 - total flux cleaned = -5.19735e-05 Jy ! Component: 200 - total flux cleaned = -6.85682e-05 Jy ! Total flux subtracted in 200 components = -6.85682e-05 Jy ! Clean residual min=-0.002643 max=0.002441 Jy/beam ! Clean residual mean=0.000015 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.263429 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 102 components and 0.263429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147758Jy sigma=0.000656 ! Fit after self-cal, rms=0.147758Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=9.882 mas, bpa=17.37 degrees ! Estimated noise=950.328 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.344 x 9.882 at 17.37 degrees (North through East) ! Clean map min=-0.0024035 max=0.25027 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=9.261 mas, bpa=17.83 degrees ! Estimated noise=1425.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196244 Jy ! Component: 100 - total flux cleaned = 0.239038 Jy ! Component: 150 - total flux cleaned = 0.250779 Jy ! Component: 200 - total flux cleaned = 0.255916 Jy ! Total flux subtracted in 200 components = 0.255916 Jy ! Clean residual min=-0.003695 max=0.003276 Jy/beam ! Clean residual mean=0.000006 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.255915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.255915 Jy ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=9.882 mas, bpa=17.37 degrees ! Estimated noise=950.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297773 Jy ! Component: 100 - total flux cleaned = 0.00456971 Jy ! Component: 150 - total flux cleaned = 0.0056048 Jy ! Component: 200 - total flux cleaned = 0.00599293 Jy ! Total flux subtracted in 200 components = 0.00599293 Jy ! Clean residual min=-0.002518 max=0.002059 Jy/beam ! Clean residual mean=0.000008 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.261908 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 51 components and 0.261908 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.052 mas, bmaj=12.09 mas, bpa=9.107 degrees ! Estimated noise=1098.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629986 Jy ! Component: 100 - total flux cleaned = 0.000729972 Jy ! Component: 150 - total flux cleaned = 0.0008152 Jy ! Component: 200 - total flux cleaned = 0.000875996 Jy ! Total flux subtracted in 200 components = 0.000875996 Jy ! Clean residual min=-0.002651 max=0.002464 Jy/beam ! Clean residual mean=0.000014 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.262784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03497e-05 Jy ! Component: 100 - total flux cleaned = 6.47988e-05 Jy ! Component: 150 - total flux cleaned = 9.86778e-05 Jy ! Component: 200 - total flux cleaned = 0.000119088 Jy ! Total flux subtracted in 200 components = 0.000119088 Jy ! Clean residual min=-0.002653 max=0.002465 Jy/beam ! Clean residual mean=0.000014 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.262903 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.262904 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=9.882 mas, bpa=17.37 degrees ! Estimated noise=950.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82599e-06 Jy ! Component: 100 - total flux cleaned = 3.5985e-05 Jy ! Component: 150 - total flux cleaned = 7.01467e-05 Jy ! Component: 200 - total flux cleaned = 6.09787e-05 Jy ! Total flux subtracted in 200 components = 6.09787e-05 Jy ! Clean residual min=-0.002448 max=0.002022 Jy/beam ! Clean residual mean=0.000009 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.262965 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.262965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147755Jy sigma=0.000656 ! Fit after self-cal, rms=0.147747Jy sigma=0.000656 wmodel J0200+0322_S_2017_01_16_pus_map.mod ! Writing 87 model components to file: J0200+0322_S_2017_01_16_pus_map.mod wobs J0200+0322_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0200+0322_S_2017_01_16_pus_uvs.fits wwins J0200+0322_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0200+0322_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000854975 Jy ! Component: 100 - total flux cleaned = -0.00104778 Jy ! Component: 150 - total flux cleaned = -0.000943526 Jy ! Component: 200 - total flux cleaned = -0.000942995 Jy ! Component: 250 - total flux cleaned = -0.000718691 Jy ! Component: 300 - total flux cleaned = -0.000594259 Jy ! Component: 350 - total flux cleaned = -0.000594936 Jy ! Component: 400 - total flux cleaned = -0.000624193 Jy ! Component: 450 - total flux cleaned = -0.000594716 Jy ! Component: 500 - total flux cleaned = -0.000595468 Jy ! Component: 550 - total flux cleaned = -0.000623748 Jy ! Component: 600 - total flux cleaned = -0.000678441 Jy ! Component: 650 - total flux cleaned = -0.000785973 Jy ! Component: 700 - total flux cleaned = -0.000838955 Jy ! Component: 750 - total flux cleaned = -0.000995596 Jy ! Component: 800 - total flux cleaned = -0.00109855 Jy ! Component: 850 - total flux cleaned = -0.00122628 Jy ! Component: 900 - total flux cleaned = -0.00135173 Jy ! Component: 950 - total flux cleaned = -0.00152477 Jy ! Component: 1000 - total flux cleaned = -0.00169563 Jy ! Component: 1050 - total flux cleaned = -0.0017914 Jy ! Component: 1100 - total flux cleaned = -0.00190992 Jy ! Component: 1150 - total flux cleaned = -0.00198028 Jy ! Component: 1200 - total flux cleaned = -0.00207325 Jy ! Component: 1250 - total flux cleaned = -0.00223384 Jy ! Component: 1300 - total flux cleaned = -0.00230186 Jy ! Component: 1350 - total flux cleaned = -0.00241404 Jy ! Component: 1400 - total flux cleaned = -0.00252546 Jy ! Component: 1450 - total flux cleaned = -0.0026351 Jy ! Component: 1500 - total flux cleaned = -0.00272199 Jy ! Component: 1550 - total flux cleaned = -0.00278667 Jy ! Component: 1600 - total flux cleaned = -0.00280846 Jy ! Component: 1650 - total flux cleaned = -0.00289297 Jy ! Component: 1700 - total flux cleaned = -0.00297644 Jy ! Component: 1750 - total flux cleaned = -0.00301778 Jy ! Component: 1800 - total flux cleaned = -0.00305896 Jy ! Component: 1850 - total flux cleaned = -0.00311971 Jy ! Component: 1900 - total flux cleaned = -0.00313984 Jy ! Component: 1950 - total flux cleaned = -0.00315949 Jy ! Component: 2000 - total flux cleaned = -0.00311959 Jy ! Component: 2050 - total flux cleaned = -0.00313934 Jy ! Component: 2100 - total flux cleaned = -0.00311989 Jy ! Component: 2150 - total flux cleaned = -0.00315859 Jy ! Component: 2200 - total flux cleaned = -0.00323522 Jy ! Component: 2250 - total flux cleaned = -0.00314031 Jy ! Component: 2300 - total flux cleaned = -0.00314027 Jy ! Component: 2350 - total flux cleaned = -0.00310299 Jy ! Component: 2400 - total flux cleaned = -0.00313998 Jy ! Component: 2450 - total flux cleaned = -0.00308467 Jy ! Component: 2500 - total flux cleaned = -0.00306633 Jy ! Component: 2550 - total flux cleaned = -0.00308444 Jy ! Component: 2600 - total flux cleaned = -0.00308443 Jy ! Component: 2650 - total flux cleaned = -0.00312036 Jy ! Component: 2700 - total flux cleaned = -0.00308491 Jy ! Component: 2750 - total flux cleaned = -0.00310258 Jy ! Component: 2800 - total flux cleaned = -0.00308513 Jy ! Component: 2850 - total flux cleaned = -0.00311988 Jy ! Component: 2900 - total flux cleaned = -0.00315442 Jy ! Component: 2950 - total flux cleaned = -0.00315444 Jy ! Component: 3000 - total flux cleaned = -0.0031031 Jy ! Component: 3050 - total flux cleaned = -0.00312009 Jy ! Component: 3100 - total flux cleaned = -0.00308627 Jy ! Component: 3150 - total flux cleaned = -0.00305269 Jy ! Component: 3200 - total flux cleaned = -0.00301922 Jy ! Component: 3250 - total flux cleaned = -0.00300274 Jy ! Component: 3300 - total flux cleaned = -0.00298623 Jy ! Component: 3350 - total flux cleaned = -0.0030026 Jy ! Component: 3400 - total flux cleaned = -0.00300268 Jy ! Component: 3450 - total flux cleaned = -0.00293789 Jy ! Component: 3500 - total flux cleaned = -0.00290581 Jy ! Component: 3550 - total flux cleaned = -0.00285787 Jy ! Component: 3600 - total flux cleaned = -0.00284188 Jy ! Component: 3650 - total flux cleaned = -0.00276278 Jy ! Component: 3700 - total flux cleaned = -0.00274706 Jy ! Component: 3750 - total flux cleaned = -0.00273144 Jy ! Component: 3800 - total flux cleaned = -0.00271573 Jy ! Component: 3850 - total flux cleaned = -0.00266921 Jy ! Component: 3900 - total flux cleaned = -0.00265378 Jy ! Component: 3950 - total flux cleaned = -0.00265379 Jy ! Component: 4000 - total flux cleaned = -0.00260805 Jy ! Component: 4050 - total flux cleaned = -0.00257768 Jy ! Total flux subtracted in 4096 components = -0.00256261 Jy ! Clean residual min=-0.001132 max=0.000808 Jy/beam ! Clean residual mean=0.000006 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.260402 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 393 components and 0.260402 Jy ![Exited script file: muppet] wmap "J0200+0322_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.344 x 9.882 at 17.37 degrees (North through East) ! Clean map min=-0.0020201 max=0.25042 Jy/beam ! Writing clean map to FITS file: J0200+0322_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.250421 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000296357 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.35503 0.35503 0.71006 1.42012 2.84024 5.68048 11.361 22.7219 45.4439 90.8877 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.25 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.344 x 9.882 at 17.37 degrees (North through East) ! Clean map min=-0.0020201 max=0.25042 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0200+0322_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:02:05 2019