! Started logfile: J0158-1413_S_2017_05_27_pus_uvs.log on Fri May 3 10:55:03 2019 obs J0158-1413_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0158-1413_S_2017_05_27_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.911111 visibilities/baseline/integration-bin. ! Found source: J0158-1413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 9020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0158-1413_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.712111Jy sigma=0.083979 ! Fit after self-cal, rms=0.717318Jy sigma=0.083967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=6.397 mas, bpa=5.676 degrees ! Estimated noise=279.082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048057 Jy ! Component: 100 - total flux cleaned = 0.0698856 Jy ! Total flux subtracted in 100 components = 0.0698856 Jy ! Clean residual min=-0.021582 max=0.039367 Jy/beam ! Clean residual mean=-0.000156 rms=0.006886 Jy/beam ! Combined flux in latest and established models = 0.0698856 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0698856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358059Jy sigma=0.004623 ! Fit after self-cal, rms=0.357949Jy sigma=0.004622 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=7.119 mas, bpa=6.016 degrees ! Estimated noise=323.288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612714 Jy ! Component: 100 - total flux cleaned = 0.102362 Jy ! Component: 150 - total flux cleaned = 0.134264 Jy ! Component: 200 - total flux cleaned = 0.160582 Jy ! Total flux subtracted in 200 components = 0.160582 Jy ! Clean residual min=-0.033841 max=0.053733 Jy/beam ! Clean residual mean=-0.000145 rms=0.009936 Jy/beam ! Combined flux in latest and established models = 0.230468 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.230468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296989Jy sigma=0.006257 ! Fit after self-cal, rms=0.298000Jy sigma=0.006211 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.34 FD 0.48 HN 0.94 KP 1.05 ! LA 0.57 MK 0.96 NL 0.60 OV 0.67 ! PT 0.69 SC 0.53 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.49 HN 1.02 KP 1.01 ! LA 0.57 MK 0.96 NL 0.70 OV 0.68 ! PT 0.71 SC 0.53 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 23.18 FD 0.70 HN 0.95 KP 1.00 ! LA 0.62 MK 1.05 NL 0.71 OV 0.69 ! PT 0.72 SC 0.58 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.58 HN 1.38 KP 1.00* ! LA 0.41 MK 1.04 NL 1.00* OV 1.00* ! PT 0.67 SC 1.00* ! ! ! Fit before self-cal, rms=0.298000Jy sigma=0.006211 ! Fit after self-cal, rms=0.116668Jy sigma=0.001652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.972 mas, bpa=1.68 degrees ! Estimated noise=530.843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00521963 Jy ! Component: 100 - total flux cleaned = -0.00533843 Jy ! Component: 150 - total flux cleaned = -0.00578022 Jy ! Component: 200 - total flux cleaned = -0.00688746 Jy ! Total flux subtracted in 200 components = -0.00688746 Jy ! Clean residual min=-0.018164 max=0.024016 Jy/beam ! Clean residual mean=-0.000007 rms=0.005293 Jy/beam ! Combined flux in latest and established models = 0.223581 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.223581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111164Jy sigma=0.001557 ! Fit after self-cal, rms=0.099681Jy sigma=0.001356 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099681Jy sigma=0.001356 ! Fit after self-cal, rms=0.091869Jy sigma=0.001260 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.847 mas, bpa=0.6025 degrees ! Estimated noise=496.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203963 Jy ! Component: 100 - total flux cleaned = -0.00333406 Jy ! Component: 150 - total flux cleaned = -0.00443863 Jy ! Component: 200 - total flux cleaned = -0.00542703 Jy ! Total flux subtracted in 200 components = -0.00542703 Jy ! Clean residual min=-0.016496 max=0.022166 Jy/beam ! Clean residual mean=0.000029 rms=0.004593 Jy/beam ! Combined flux in latest and established models = 0.218154 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.218154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090026Jy sigma=0.001219 ! Fit after self-cal, rms=0.089948Jy sigma=0.001217 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-56.5, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229717 Jy ! Component: 100 - total flux cleaned = 0.0372701 Jy ! Component: 150 - total flux cleaned = 0.0475671 Jy ! Component: 200 - total flux cleaned = 0.0547205 Jy ! Total flux subtracted in 200 components = 0.0547205 Jy ! Clean residual min=-0.012028 max=0.014322 Jy/beam ! Clean residual mean=0.000000 rms=0.003362 Jy/beam ! Combined flux in latest and established models = 0.272874 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 127 components and 0.272874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081202Jy sigma=0.001071 ! Fit after self-cal, rms=0.080570Jy sigma=0.001060 ! Inverting map ! Added new window around map position (11.5, -77). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146066 Jy ! Component: 100 - total flux cleaned = 0.0233176 Jy ! Component: 150 - total flux cleaned = 0.0290407 Jy ! Component: 200 - total flux cleaned = 0.0330424 Jy ! Total flux subtracted in 200 components = 0.0330424 Jy ! Clean residual min=-0.011374 max=0.012495 Jy/beam ! Clean residual mean=0.000022 rms=0.002885 Jy/beam ! Combined flux in latest and established models = 0.305916 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 156 components and 0.305917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076178Jy sigma=0.001000 ! Fit after self-cal, rms=0.075671Jy sigma=0.000993 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075671Jy sigma=0.000993 ! Fit after self-cal, rms=0.065407Jy sigma=0.000962 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=7.822 mas, bpa=0.6498 degrees ! Estimated noise=479.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353409 Jy ! Component: 100 - total flux cleaned = 0.0067883 Jy ! Component: 150 - total flux cleaned = 0.00955705 Jy ! Component: 200 - total flux cleaned = 0.0112491 Jy ! Total flux subtracted in 200 components = 0.0112491 Jy ! Clean residual min=-0.009230 max=0.010525 Jy/beam ! Clean residual mean=0.000011 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.317166 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 176 components and 0.317166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063695Jy sigma=0.000929 ! Fit after self-cal, rms=0.063409Jy sigma=0.000927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286852 Jy ! Component: 100 - total flux cleaned = 0.00419282 Jy ! Component: 150 - total flux cleaned = 0.00526486 Jy ! Component: 200 - total flux cleaned = 0.00612482 Jy ! Total flux subtracted in 200 components = 0.00612482 Jy ! Clean residual min=-0.008518 max=0.009678 Jy/beam ! Clean residual mean=0.000010 rms=0.002405 Jy/beam ! Combined flux in latest and established models = 0.32329 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 186 components and 0.32329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062637Jy sigma=0.000913 ! Fit after self-cal, rms=0.062533Jy sigma=0.000912 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062533Jy sigma=0.000912 ! Fit after self-cal, rms=0.060272Jy sigma=0.000907 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.637 mas, bmaj=14.93 mas, bpa=1.492 degrees ! Estimated noise=585.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355201 Jy ! Component: 100 - total flux cleaned = 0.00630055 Jy ! Component: 150 - total flux cleaned = 0.00785771 Jy ! Component: 200 - total flux cleaned = 0.00869277 Jy ! Total flux subtracted in 200 components = 0.00869277 Jy ! Clean residual min=-0.013576 max=0.015491 Jy/beam ! Clean residual mean=0.000015 rms=0.003753 Jy/beam ! Combined flux in latest and established models = 0.331983 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 202 components and 0.331983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059749Jy sigma=0.000895 ! Fit after self-cal, rms=0.059486Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716563 Jy ! Component: 100 - total flux cleaned = 0.00134641 Jy ! Component: 150 - total flux cleaned = 0.00205095 Jy ! Component: 200 - total flux cleaned = 0.00256079 Jy ! Total flux subtracted in 200 components = 0.00256079 Jy ! Clean residual min=-0.012981 max=0.015017 Jy/beam ! Clean residual mean=0.000014 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 0.334544 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 215 components and 0.334544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059389Jy sigma=0.000888 ! Fit after self-cal, rms=0.059269Jy sigma=0.000887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.826 mas, bpa=0.6234 degrees ! Estimated noise=472.493 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 7.826 at 0.6234 degrees (North through East) ! Clean map min=-0.0085567 max=0.11243 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=6.862 mas, bpa=0.1271 degrees ! Estimated noise=581.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100337 Jy ! Component: 100 - total flux cleaned = 0.13618 Jy ! Component: 150 - total flux cleaned = 0.158497 Jy ! Component: 200 - total flux cleaned = 0.175298 Jy ! Total flux subtracted in 200 components = 0.175298 Jy ! Clean residual min=-0.010065 max=0.018574 Jy/beam ! Clean residual mean=-0.000064 rms=0.003175 Jy/beam ! Combined flux in latest and established models = 0.175298 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.175298 Jy ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.826 mas, bpa=0.6234 degrees ! Estimated noise=472.493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248145 Jy ! Component: 100 - total flux cleaned = 0.043845 Jy ! Component: 150 - total flux cleaned = 0.0598196 Jy ! Component: 200 - total flux cleaned = 0.0733255 Jy ! Total flux subtracted in 200 components = 0.0733255 Jy ! Clean residual min=-0.010051 max=0.013883 Jy/beam ! Clean residual mean=-0.000032 rms=0.003383 Jy/beam ! Combined flux in latest and established models = 0.248624 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 79 components and 0.248623 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.637 mas, bmaj=14.93 mas, bpa=1.492 degrees ! Estimated noise=585.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210786 Jy ! Component: 100 - total flux cleaned = 0.0363708 Jy ! Component: 150 - total flux cleaned = 0.0480803 Jy ! Component: 200 - total flux cleaned = 0.0572716 Jy ! Total flux subtracted in 200 components = 0.0572716 Jy ! Clean residual min=-0.012368 max=0.014356 Jy/beam ! Clean residual mean=-0.000010 rms=0.004172 Jy/beam ! Combined flux in latest and established models = 0.305895 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727806 Jy ! Component: 100 - total flux cleaned = 0.0117907 Jy ! Component: 150 - total flux cleaned = 0.0141854 Jy ! Component: 200 - total flux cleaned = 0.0154265 Jy ! Total flux subtracted in 200 components = 0.0154265 Jy ! Clean residual min=-0.011724 max=0.013304 Jy/beam ! Clean residual mean=0.000003 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 0.321322 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 160 components and 0.321321 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.826 mas, bpa=0.6234 degrees ! Estimated noise=472.493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604657 Jy ! Component: 100 - total flux cleaned = 0.00136559 Jy ! Component: 150 - total flux cleaned = 0.00152619 Jy ! Component: 200 - total flux cleaned = 0.00182768 Jy ! Total flux subtracted in 200 components = 0.00182768 Jy ! Clean residual min=-0.008152 max=0.008725 Jy/beam ! Clean residual mean=-0.000001 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.323149 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 188 components and 0.323149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058767Jy sigma=0.000871 ! Fit after self-cal, rms=0.058259Jy sigma=0.000861 wmodel J0158-1413_S_2017_05_27_pus_map.mod ! Writing 188 model components to file: J0158-1413_S_2017_05_27_pus_map.mod wobs J0158-1413_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0158-1413_S_2017_05_27_pus_uvs.fits wwins J0158-1413_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J0158-1413_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374738 Jy ! Component: 100 - total flux cleaned = 0.00605967 Jy ! Component: 150 - total flux cleaned = 0.00770495 Jy ! Component: 200 - total flux cleaned = 0.00912894 Jy ! Component: 250 - total flux cleaned = 0.0108348 Jy ! Component: 300 - total flux cleaned = 0.0122529 Jy ! Component: 350 - total flux cleaned = 0.0135118 Jy ! Component: 400 - total flux cleaned = 0.0147271 Jy ! Component: 450 - total flux cleaned = 0.0158016 Jy ! Component: 500 - total flux cleaned = 0.0165569 Jy ! Component: 550 - total flux cleaned = 0.0175642 Jy ! Component: 600 - total flux cleaned = 0.0183631 Jy ! Component: 650 - total flux cleaned = 0.0191428 Jy ! Component: 700 - total flux cleaned = 0.0198156 Jy ! Component: 750 - total flux cleaned = 0.0204726 Jy ! Component: 800 - total flux cleaned = 0.0211123 Jy ! Component: 850 - total flux cleaned = 0.0215814 Jy ! Component: 900 - total flux cleaned = 0.0220415 Jy ! Component: 950 - total flux cleaned = 0.0226391 Jy ! Component: 1000 - total flux cleaned = 0.023079 Jy ! Component: 1050 - total flux cleaned = 0.0235079 Jy ! Component: 1100 - total flux cleaned = 0.023925 Jy ! Component: 1150 - total flux cleaned = 0.0240604 Jy ! Component: 1200 - total flux cleaned = 0.0241946 Jy ! Component: 1250 - total flux cleaned = 0.0244584 Jy ! Component: 1300 - total flux cleaned = 0.024782 Jy ! Component: 1350 - total flux cleaned = 0.0249098 Jy ! Component: 1400 - total flux cleaned = 0.0252829 Jy ! Component: 1450 - total flux cleaned = 0.0254045 Jy ! Component: 1500 - total flux cleaned = 0.0256442 Jy ! Component: 1550 - total flux cleaned = 0.0258796 Jy ! Component: 1600 - total flux cleaned = 0.0260533 Jy ! Component: 1650 - total flux cleaned = 0.0263367 Jy ! Component: 1700 - total flux cleaned = 0.0265595 Jy ! Component: 1750 - total flux cleaned = 0.0268336 Jy ! Component: 1800 - total flux cleaned = 0.0269428 Jy ! Component: 1850 - total flux cleaned = 0.0274215 Jy ! Component: 1900 - total flux cleaned = 0.0277337 Jy ! Component: 1950 - total flux cleaned = 0.0280415 Jy ! Component: 2000 - total flux cleaned = 0.0281933 Jy ! Component: 2050 - total flux cleaned = 0.0285934 Jy ! Component: 2100 - total flux cleaned = 0.0288377 Jy ! Component: 2150 - total flux cleaned = 0.0290786 Jy ! Component: 2200 - total flux cleaned = 0.0293636 Jy ! Component: 2250 - total flux cleaned = 0.0296908 Jy ! Component: 2300 - total flux cleaned = 0.0299199 Jy ! Component: 2350 - total flux cleaned = 0.030102 Jy ! Component: 2400 - total flux cleaned = 0.0302815 Jy ! Component: 2450 - total flux cleaned = 0.0305025 Jy ! Component: 2500 - total flux cleaned = 0.0307623 Jy ! Component: 2550 - total flux cleaned = 0.0308904 Jy ! Component: 2600 - total flux cleaned = 0.0311008 Jy ! Component: 2650 - total flux cleaned = 0.0311845 Jy ! Component: 2700 - total flux cleaned = 0.031349 Jy ! Component: 2750 - total flux cleaned = 0.0315923 Jy ! Component: 2800 - total flux cleaned = 0.0317929 Jy ! Component: 2850 - total flux cleaned = 0.0319119 Jy ! Component: 2900 - total flux cleaned = 0.0321465 Jy ! Component: 2950 - total flux cleaned = 0.0323005 Jy ! Component: 3000 - total flux cleaned = 0.0324542 Jy ! Component: 3050 - total flux cleaned = 0.0327558 Jy ! Component: 3100 - total flux cleaned = 0.03309 Jy ! Component: 3150 - total flux cleaned = 0.0331637 Jy ! Component: 3200 - total flux cleaned = 0.0334549 Jy ! Component: 3250 - total flux cleaned = 0.0336349 Jy ! Component: 3300 - total flux cleaned = 0.0339904 Jy ! Component: 3350 - total flux cleaned = 0.0341657 Jy ! Component: 3400 - total flux cleaned = 0.0344089 Jy ! Component: 3450 - total flux cleaned = 0.0345814 Jy ! Component: 3500 - total flux cleaned = 0.0348542 Jy ! Component: 3550 - total flux cleaned = 0.0350898 Jy ! Component: 3600 - total flux cleaned = 0.0351898 Jy ! Component: 3650 - total flux cleaned = 0.035355 Jy ! Component: 3700 - total flux cleaned = 0.0354532 Jy ! Component: 3750 - total flux cleaned = 0.0354206 Jy ! Component: 3800 - total flux cleaned = 0.0356137 Jy ! Component: 3850 - total flux cleaned = 0.0357091 Jy ! Component: 3900 - total flux cleaned = 0.0357095 Jy ! Component: 3950 - total flux cleaned = 0.0358031 Jy ! Component: 4000 - total flux cleaned = 0.035834 Jy ! Component: 4050 - total flux cleaned = 0.0358646 Jy ! Total flux subtracted in 4096 components = 0.0359862 Jy ! Clean residual min=-0.001655 max=0.001578 Jy/beam ! Clean residual mean=0.000014 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.359135 Jy keep ! Adding 440 model components to the UV plane model. ! The established model now contains 628 components and 0.359135 Jy ![Exited script file: muppet] wmap "J0158-1413_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 7.826 at 0.6234 degrees (North through East) ! Clean map min=-0.0037495 max=0.12576 Jy/beam ! Writing clean map to FITS file: J0158-1413_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125758 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000651727 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.55472 1.55472 3.10943 6.21886 12.4377 24.8754 49.7509 99.5018 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 7.826 at 0.6234 degrees (North through East) ! Clean map min=-0.0037495 max=0.12576 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0158-1413_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:55:07 2019