! Started logfile: J0157+0011_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:01:54 2019 obs J0157+0011_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0157+0011_S_2017_01_16_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698447 visibilities/baseline/integration-bin. ! Found source: J0157+0011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0157+0011_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897731Jy sigma=0.006395 ! Fit after self-cal, rms=0.878063Jy sigma=0.006327 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=9.599 mas, bpa=18.66 degrees ! Estimated noise=1324.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103641 Jy ! Component: 100 - total flux cleaned = 0.127271 Jy ! Total flux subtracted in 100 components = 0.127271 Jy ! Clean residual min=-0.005520 max=0.008522 Jy/beam ! Clean residual mean=0.000024 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.127271 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.127271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153770Jy sigma=0.000691 ! Fit after self-cal, rms=0.153665Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=10.26 mas, bpa=17.13 degrees ! Estimated noise=977.807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956683 Jy ! Component: 100 - total flux cleaned = 0.013786 Jy ! Component: 150 - total flux cleaned = 0.0142757 Jy ! Component: 200 - total flux cleaned = 0.0143654 Jy ! Total flux subtracted in 200 components = 0.0143654 Jy ! Clean residual min=-0.005093 max=0.006078 Jy/beam ! Clean residual mean=0.000012 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.141636 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.141636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152971Jy sigma=0.000684 ! Fit after self-cal, rms=0.153028Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 HN 0.94 KP 0.99 ! LA 1.01 MK 1.00* NL 0.88 OV 0.98 ! PT 1.09 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.01 KP 0.95 ! LA 0.99 MK 1.00* NL 1.05 OV 1.00 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 0.98 KP 1.01 ! LA 1.03 MK 1.00* NL 1.03 OV 0.96 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.99 KP 0.74 ! LA 0.89 MK 1.00* NL 1.00* OV 0.95 ! PT 1.09 SC 0.83 ! ! ! Fit before self-cal, rms=0.153028Jy sigma=0.000684 ! Fit after self-cal, rms=0.128186Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.39 mas, bmaj=10.23 mas, bpa=16.94 degrees ! Estimated noise=961.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659491 Jy ! Component: 100 - total flux cleaned = -0.000925976 Jy ! Component: 150 - total flux cleaned = -0.00100813 Jy ! Component: 200 - total flux cleaned = -0.00100904 Jy ! Total flux subtracted in 200 components = -0.00100904 Jy ! Clean residual min=-0.004962 max=0.004678 Jy/beam ! Clean residual mean=0.000002 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.140627 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.140627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128123Jy sigma=0.000680 ! Fit after self-cal, rms=0.128058Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128058Jy sigma=0.000679 ! Fit after self-cal, rms=0.132960Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.352 mas, bmaj=10.21 mas, bpa=16.6 degrees ! Estimated noise=964.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108668 Jy ! Component: 100 - total flux cleaned = 0.00114512 Jy ! Component: 150 - total flux cleaned = 0.00107564 Jy ! Component: 200 - total flux cleaned = 0.00110304 Jy ! Total flux subtracted in 200 components = 0.00110304 Jy ! Clean residual min=-0.002576 max=0.002834 Jy/beam ! Clean residual mean=-0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.14173 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.14173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132909Jy sigma=0.000664 ! Fit after self-cal, rms=0.133200Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175636 Jy ! Component: 100 - total flux cleaned = -0.000102567 Jy ! Component: 150 - total flux cleaned = -3.94259e-05 Jy ! Component: 200 - total flux cleaned = -2.40655e-06 Jy ! Total flux subtracted in 200 components = -2.40655e-06 Jy ! Clean residual min=-0.002462 max=0.002802 Jy/beam ! Clean residual mean=-0.000005 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.141728 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.141728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133184Jy sigma=0.000664 ! Fit after self-cal, rms=0.133192Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133192Jy sigma=0.000664 ! Fit after self-cal, rms=0.135020Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.342 mas, bmaj=10.19 mas, bpa=16.49 degrees ! Estimated noise=965.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322155 Jy ! Component: 100 - total flux cleaned = 0.000391876 Jy ! Component: 150 - total flux cleaned = 0.000375391 Jy ! Component: 200 - total flux cleaned = 0.000402876 Jy ! Total flux subtracted in 200 components = 0.000402876 Jy ! Clean residual min=-0.002390 max=0.002694 Jy/beam ! Clean residual mean=-0.000003 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.14213 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.14213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135003Jy sigma=0.000663 ! Fit after self-cal, rms=0.135025Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129465 Jy ! Component: 100 - total flux cleaned = -5.95168e-05 Jy ! Component: 150 - total flux cleaned = -3.49178e-05 Jy ! Component: 200 - total flux cleaned = -1.55769e-06 Jy ! Total flux subtracted in 200 components = -1.55769e-06 Jy ! Clean residual min=-0.002385 max=0.002720 Jy/beam ! Clean residual mean=-0.000003 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.142129 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.142129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135019Jy sigma=0.000663 ! Fit after self-cal, rms=0.135018Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135018Jy sigma=0.000663 ! Fit after self-cal, rms=0.135349Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.161 mas, bmaj=12.65 mas, bpa=8.033 degrees ! Estimated noise=1113.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118227 Jy ! Component: 100 - total flux cleaned = 0.000150056 Jy ! Component: 150 - total flux cleaned = 0.00016491 Jy ! Component: 200 - total flux cleaned = 0.000148348 Jy ! Total flux subtracted in 200 components = 0.000148348 Jy ! Clean residual min=-0.002683 max=0.002987 Jy/beam ! Clean residual mean=-0.000006 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.142277 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.142277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135343Jy sigma=0.000663 ! Fit after self-cal, rms=0.135344Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.24261e-05 Jy ! Component: 100 - total flux cleaned = -1.19846e-05 Jy ! Component: 150 - total flux cleaned = -1.19493e-05 Jy ! Component: 200 - total flux cleaned = -1.16882e-05 Jy ! Total flux subtracted in 200 components = -1.16882e-05 Jy ! Clean residual min=-0.002704 max=0.002971 Jy/beam ! Clean residual mean=-0.000006 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.142266 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.142266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135343Jy sigma=0.000663 ! Fit after self-cal, rms=0.135343Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.34 mas, bmaj=10.18 mas, bpa=16.41 degrees ! Estimated noise=966.312 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.34 x 10.18 at 16.41 degrees (North through East) ! Clean map min=-0.0023286 max=0.13031 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=9.516 mas, bpa=18.05 degrees ! Estimated noise=1300.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101517 Jy ! Component: 100 - total flux cleaned = 0.125393 Jy ! Component: 150 - total flux cleaned = 0.134404 Jy ! Component: 200 - total flux cleaned = 0.138486 Jy ! Total flux subtracted in 200 components = 0.138486 Jy ! Clean residual min=-0.003570 max=0.003608 Jy/beam ! Clean residual mean=0.000004 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.138486 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.138486 Jy ! Inverting map and beam ! Estimated beam: bmin=4.34 mas, bmaj=10.18 mas, bpa=16.41 degrees ! Estimated noise=966.312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212486 Jy ! Component: 100 - total flux cleaned = 0.00255961 Jy ! Component: 150 - total flux cleaned = 0.00272692 Jy ! Component: 200 - total flux cleaned = 0.00272498 Jy ! Total flux subtracted in 200 components = 0.00272498 Jy ! Clean residual min=-0.002510 max=0.002803 Jy/beam ! Clean residual mean=-0.000003 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.141211 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.141211 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.161 mas, bmaj=12.65 mas, bpa=8.033 degrees ! Estimated noise=1113.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485645 Jy ! Component: 100 - total flux cleaned = 0.000464062 Jy ! Component: 150 - total flux cleaned = 0.000513448 Jy ! Component: 200 - total flux cleaned = 0.000539891 Jy ! Total flux subtracted in 200 components = 0.000539891 Jy ! Clean residual min=-0.002691 max=0.003056 Jy/beam ! Clean residual mean=-0.000006 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.141751 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.33707e-05 Jy ! Component: 100 - total flux cleaned = 3.39004e-05 Jy ! Component: 150 - total flux cleaned = 4.37496e-05 Jy ! Component: 200 - total flux cleaned = 5.29083e-05 Jy ! Total flux subtracted in 200 components = 5.29083e-05 Jy ! Clean residual min=-0.002691 max=0.003068 Jy/beam ! Clean residual mean=-0.000006 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.141804 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.141804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.34 mas, bmaj=10.18 mas, bpa=16.41 degrees ! Estimated noise=966.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.49534e-05 Jy ! Component: 100 - total flux cleaned = -1.99579e-05 Jy ! Component: 150 - total flux cleaned = 1.60651e-06 Jy ! Component: 200 - total flux cleaned = 2.1491e-05 Jy ! Total flux subtracted in 200 components = 2.1491e-05 Jy ! Clean residual min=-0.002418 max=0.002838 Jy/beam ! Clean residual mean=-0.000003 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.141825 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.141825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135381Jy sigma=0.000663 ! Fit after self-cal, rms=0.135406Jy sigma=0.000663 wmodel J0157+0011_S_2017_01_16_pus_map.mod ! Writing 59 model components to file: J0157+0011_S_2017_01_16_pus_map.mod wobs J0157+0011_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0157+0011_S_2017_01_16_pus_uvs.fits wwins J0157+0011_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0157+0011_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105555 Jy ! Component: 100 - total flux cleaned = 0.00145732 Jy ! Component: 150 - total flux cleaned = 0.00186952 Jy ! Component: 200 - total flux cleaned = 0.00206659 Jy ! Component: 250 - total flux cleaned = 0.00229463 Jy ! Component: 300 - total flux cleaned = 0.00251489 Jy ! Component: 350 - total flux cleaned = 0.00272925 Jy ! Component: 400 - total flux cleaned = 0.00286836 Jy ! Component: 450 - total flux cleaned = 0.00286827 Jy ! Component: 500 - total flux cleaned = 0.0029682 Jy ! Component: 550 - total flux cleaned = 0.00309801 Jy ! Component: 600 - total flux cleaned = 0.00316162 Jy ! Component: 650 - total flux cleaned = 0.00316184 Jy ! Component: 700 - total flux cleaned = 0.00310192 Jy ! Component: 750 - total flux cleaned = 0.00304243 Jy ! Component: 800 - total flux cleaned = 0.00298356 Jy ! Component: 850 - total flux cleaned = 0.00301212 Jy ! Component: 900 - total flux cleaned = 0.00286824 Jy ! Component: 950 - total flux cleaned = 0.00286829 Jy ! Component: 1000 - total flux cleaned = 0.00292414 Jy ! Component: 1050 - total flux cleaned = 0.00286908 Jy ! Component: 1100 - total flux cleaned = 0.00292408 Jy ! Component: 1150 - total flux cleaned = 0.002951 Jy ! Component: 1200 - total flux cleaned = 0.00292408 Jy ! Component: 1250 - total flux cleaned = 0.00292428 Jy ! Component: 1300 - total flux cleaned = 0.00297625 Jy ! Component: 1350 - total flux cleaned = 0.00292485 Jy ! Component: 1400 - total flux cleaned = 0.00292512 Jy ! Component: 1450 - total flux cleaned = 0.00295039 Jy ! Component: 1500 - total flux cleaned = 0.00297506 Jy ! Component: 1550 - total flux cleaned = 0.0029503 Jy ! Component: 1600 - total flux cleaned = 0.00297434 Jy ! Component: 1650 - total flux cleaned = 0.00302218 Jy ! Component: 1700 - total flux cleaned = 0.00299852 Jy ! Component: 1750 - total flux cleaned = 0.00311624 Jy ! Component: 1800 - total flux cleaned = 0.00313938 Jy ! Component: 1850 - total flux cleaned = 0.0031394 Jy ! Component: 1900 - total flux cleaned = 0.0031163 Jy ! Component: 1950 - total flux cleaned = 0.0031163 Jy ! Component: 2000 - total flux cleaned = 0.00304888 Jy ! Component: 2050 - total flux cleaned = 0.0030269 Jy ! Component: 2100 - total flux cleaned = 0.00300493 Jy ! Component: 2150 - total flux cleaned = 0.00300533 Jy ! Component: 2200 - total flux cleaned = 0.00296175 Jy ! Component: 2250 - total flux cleaned = 0.00294019 Jy ! Component: 2300 - total flux cleaned = 0.00291859 Jy ! Component: 2350 - total flux cleaned = 0.00291845 Jy ! Component: 2400 - total flux cleaned = 0.00279211 Jy ! Component: 2450 - total flux cleaned = 0.00279232 Jy ! Component: 2500 - total flux cleaned = 0.00275092 Jy ! Component: 2550 - total flux cleaned = 0.00275103 Jy ! Component: 2600 - total flux cleaned = 0.00275113 Jy ! Component: 2650 - total flux cleaned = 0.00275127 Jy ! Component: 2700 - total flux cleaned = 0.00267053 Jy ! Component: 2750 - total flux cleaned = 0.00269058 Jy ! Component: 2800 - total flux cleaned = 0.00267091 Jy ! Component: 2850 - total flux cleaned = 0.00267119 Jy ! Component: 2900 - total flux cleaned = 0.00267124 Jy ! Component: 2950 - total flux cleaned = 0.00259317 Jy ! Component: 3000 - total flux cleaned = 0.00257397 Jy ! Component: 3050 - total flux cleaned = 0.00261265 Jy ! Component: 3100 - total flux cleaned = 0.00265094 Jy ! Component: 3150 - total flux cleaned = 0.00259391 Jy ! Component: 3200 - total flux cleaned = 0.00259395 Jy ! Component: 3250 - total flux cleaned = 0.00261279 Jy ! Component: 3300 - total flux cleaned = 0.00259398 Jy ! Component: 3350 - total flux cleaned = 0.00255681 Jy ! Component: 3400 - total flux cleaned = 0.00252002 Jy ! Component: 3450 - total flux cleaned = 0.00246498 Jy ! Component: 3500 - total flux cleaned = 0.00235565 Jy ! Component: 3550 - total flux cleaned = 0.0023558 Jy ! Component: 3600 - total flux cleaned = 0.0023197 Jy ! Component: 3650 - total flux cleaned = 0.00235536 Jy ! Component: 3700 - total flux cleaned = 0.00231977 Jy ! Component: 3750 - total flux cleaned = 0.00233748 Jy ! Component: 3800 - total flux cleaned = 0.00235507 Jy ! Component: 3850 - total flux cleaned = 0.00235506 Jy ! Component: 3900 - total flux cleaned = 0.00235508 Jy ! Component: 3950 - total flux cleaned = 0.00237237 Jy ! Component: 4000 - total flux cleaned = 0.00240696 Jy ! Component: 4050 - total flux cleaned = 0.00250972 Jy ! Total flux subtracted in 4096 components = 0.0025096 Jy ! Clean residual min=-0.000964 max=0.000971 Jy/beam ! Clean residual mean=0.000000 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.144335 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 371 components and 0.144335 Jy ![Exited script file: muppet] wmap "J0157+0011_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.34 x 10.18 at 16.41 degrees (North through East) ! Clean map min=-0.0018958 max=0.13001 Jy/beam ! Writing clean map to FITS file: J0157+0011_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00033383 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.770329 0.770329 1.54066 3.08132 6.16263 12.3253 24.6505 49.301 98.6021 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.34 x 10.18 at 16.41 degrees (North through East) ! Clean map min=-0.0018958 max=0.13001 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0157+0011_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:02:00 2019