! Started logfile: J0154+0823_S_2017_01_21_pus_uvs.log on Sun May 5 15:43:37 2019 obs J0154+0823_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0154+0823_S_2017_01_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.635464 visibilities/baseline/integration-bin. ! Found source: J0154+0823 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 13360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0154+0823_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 418 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 418 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 720 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961620Jy sigma=0.007482 ! Fit after self-cal, rms=0.933414Jy sigma=0.007335 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=6.609 mas, bpa=-6.159 degrees ! Estimated noise=1191.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555758 Jy ! Component: 100 - total flux cleaned = 0.067701 Jy ! Total flux subtracted in 100 components = 0.067701 Jy ! Clean residual min=-0.003301 max=0.003421 Jy/beam ! Clean residual mean=-0.000002 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.067701 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.067701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098661Jy sigma=0.000650 ! Fit after self-cal, rms=0.098397Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.155 mas, bpa=-5.039 degrees ! Estimated noise=884.292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312514 Jy ! Component: 100 - total flux cleaned = 0.00456645 Jy ! Component: 150 - total flux cleaned = 0.005399 Jy ! Component: 200 - total flux cleaned = 0.00583024 Jy ! Total flux subtracted in 200 components = 0.00583024 Jy ! Clean residual min=-0.002213 max=0.002466 Jy/beam ! Clean residual mean=0.000014 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0735312 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 28 components and 0.0735312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098270Jy sigma=0.000648 ! Fit after self-cal, rms=0.098286Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.00 LA 1.01 ! MK 0.96 NL 0.99 OV 0.98 PT 1.05 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.02 LA 0.99 ! MK 1.04 NL 1.03 OV 1.06 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.05 LA 1.04 ! MK 1.02 NL 1.04 OV 0.98 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.08 HN 0.82 LA 0.90 ! MK 1.03 NL 1.00* OV 0.99 PT 1.03 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.098286Jy sigma=0.000648 ! Fit after self-cal, rms=0.096941Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.148 mas, bpa=-4.987 degrees ! Estimated noise=886.917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579449 Jy ! Component: 100 - total flux cleaned = 0.000792015 Jy ! Component: 150 - total flux cleaned = 0.000840103 Jy ! Component: 200 - total flux cleaned = 0.000851121 Jy ! Total flux subtracted in 200 components = 0.000851121 Jy ! Clean residual min=-0.002147 max=0.002282 Jy/beam ! Clean residual mean=0.000016 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0743823 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.0743824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096935Jy sigma=0.000647 ! Fit after self-cal, rms=0.096911Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096911Jy sigma=0.000647 ! Fit after self-cal, rms=0.093470Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.147 mas, bpa=-4.893 degrees ! Estimated noise=885.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019369 Jy ! Component: 100 - total flux cleaned = 0.000264624 Jy ! Component: 150 - total flux cleaned = 0.00031295 Jy ! Component: 200 - total flux cleaned = 0.000333729 Jy ! Total flux subtracted in 200 components = 0.000333729 Jy ! Clean residual min=-0.002044 max=0.002178 Jy/beam ! Clean residual mean=0.000011 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0747161 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0747161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093467Jy sigma=0.000645 ! Fit after self-cal, rms=0.093434Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.02845e-05 Jy ! Component: 100 - total flux cleaned = -2.78964e-05 Jy ! Component: 150 - total flux cleaned = -3.532e-05 Jy ! Component: 200 - total flux cleaned = -3.50819e-05 Jy ! Total flux subtracted in 200 components = -3.50819e-05 Jy ! Clean residual min=-0.002009 max=0.002153 Jy/beam ! Clean residual mean=0.000011 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.074681 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.074681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093433Jy sigma=0.000645 ! Fit after self-cal, rms=0.093432Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093432Jy sigma=0.000645 ! Fit after self-cal, rms=0.093262Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.146 mas, bpa=-4.987 degrees ! Estimated noise=884.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.21783e-05 Jy ! Component: 100 - total flux cleaned = 9.66387e-05 Jy ! Component: 150 - total flux cleaned = 0.000109576 Jy ! Component: 200 - total flux cleaned = 0.000115536 Jy ! Total flux subtracted in 200 components = 0.000115536 Jy ! Clean residual min=-0.002004 max=0.002173 Jy/beam ! Clean residual mean=0.000010 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0747966 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0747966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093260Jy sigma=0.000645 ! Fit after self-cal, rms=0.093280Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.50906e-05 Jy ! Component: 100 - total flux cleaned = -6.51711e-05 Jy ! Component: 150 - total flux cleaned = -5.91856e-05 Jy ! Component: 200 - total flux cleaned = -5.36821e-05 Jy ! Total flux subtracted in 200 components = -5.36821e-05 Jy ! Clean residual min=-0.002022 max=0.002160 Jy/beam ! Clean residual mean=0.000010 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0747429 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0747429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093279Jy sigma=0.000645 ! Fit after self-cal, rms=0.093263Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093263Jy sigma=0.000645 ! Fit after self-cal, rms=0.093218Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.74 mas, bmaj=10.98 mas, bpa=-2.771 degrees ! Estimated noise=1157.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476778 Jy ! Component: 100 - total flux cleaned = 0.000603265 Jy ! Component: 150 - total flux cleaned = 0.000699306 Jy ! Component: 200 - total flux cleaned = 0.000771868 Jy ! Total flux subtracted in 200 components = 0.000771868 Jy ! Clean residual min=-0.003213 max=0.002825 Jy/beam ! Clean residual mean=0.000025 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0755148 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.0755148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093228Jy sigma=0.000645 ! Fit after self-cal, rms=0.093234Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.16387e-05 Jy ! Component: 100 - total flux cleaned = 7.11216e-05 Jy ! Component: 150 - total flux cleaned = 8.76211e-05 Jy ! Component: 200 - total flux cleaned = 0.000100979 Jy ! Total flux subtracted in 200 components = 0.000100979 Jy ! Clean residual min=-0.003198 max=0.002822 Jy/beam ! Clean residual mean=0.000025 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0756157 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.0756157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093241Jy sigma=0.000645 ! Fit after self-cal, rms=0.093238Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.146 mas, bpa=-5.074 degrees ! Estimated noise=883.394 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.146 at -5.074 degrees (North through East) ! Clean map min=-0.001968 max=0.070687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=6.61 mas, bpa=-6.17 degrees ! Estimated noise=1176.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552107 Jy ! Component: 100 - total flux cleaned = 0.0672606 Jy ! Component: 150 - total flux cleaned = 0.0698299 Jy ! Component: 200 - total flux cleaned = 0.0708944 Jy ! Total flux subtracted in 200 components = 0.0708944 Jy ! Clean residual min=-0.003196 max=0.002868 Jy/beam ! Clean residual mean=-0.000001 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0708944 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0708944 Jy ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.146 mas, bpa=-5.074 degrees ! Estimated noise=883.394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169473 Jy ! Component: 100 - total flux cleaned = 0.0026367 Jy ! Component: 150 - total flux cleaned = 0.00314676 Jy ! Component: 200 - total flux cleaned = 0.00331929 Jy ! Total flux subtracted in 200 components = 0.00331929 Jy ! Clean residual min=-0.002115 max=0.002252 Jy/beam ! Clean residual mean=0.000009 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0742137 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.0742137 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.74 mas, bmaj=10.98 mas, bpa=-2.771 degrees ! Estimated noise=1157.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916359 Jy ! Component: 100 - total flux cleaned = 0.00105353 Jy ! Component: 150 - total flux cleaned = 0.00115768 Jy ! Component: 200 - total flux cleaned = 0.00123705 Jy ! Total flux subtracted in 200 components = 0.00123705 Jy ! Clean residual min=-0.003182 max=0.002811 Jy/beam ! Clean residual mean=0.000025 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0754508 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67137e-05 Jy ! Component: 100 - total flux cleaned = 4.62139e-05 Jy ! Component: 150 - total flux cleaned = 5.50812e-05 Jy ! Component: 200 - total flux cleaned = 6.33282e-05 Jy ! Total flux subtracted in 200 components = 6.33282e-05 Jy ! Clean residual min=-0.003183 max=0.002802 Jy/beam ! Clean residual mean=0.000025 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0755141 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0755141 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.146 mas, bpa=-5.074 degrees ! Estimated noise=883.394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000588165 Jy ! Component: 100 - total flux cleaned = -0.000732291 Jy ! Component: 150 - total flux cleaned = -0.000787453 Jy ! Component: 200 - total flux cleaned = -0.000788146 Jy ! Total flux subtracted in 200 components = -0.000788146 Jy ! Clean residual min=-0.002110 max=0.002239 Jy/beam ! Clean residual mean=0.000009 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.074726 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.074726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093236Jy sigma=0.000645 ! Fit after self-cal, rms=0.093237Jy sigma=0.000645 wmodel J0154+0823_S_2017_01_21_pus_map.mod ! Writing 54 model components to file: J0154+0823_S_2017_01_21_pus_map.mod wobs J0154+0823_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0154+0823_S_2017_01_21_pus_uvs.fits wwins J0154+0823_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0154+0823_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260818 Jy ! Component: 100 - total flux cleaned = 0.000114226 Jy ! Component: 150 - total flux cleaned = 4.4534e-05 Jy ! Component: 200 - total flux cleaned = 0.000109824 Jy ! Component: 250 - total flux cleaned = 0.000141832 Jy ! Component: 300 - total flux cleaned = 0.000235061 Jy ! Component: 350 - total flux cleaned = 0.000357055 Jy ! Component: 400 - total flux cleaned = 0.000446504 Jy ! Component: 450 - total flux cleaned = 0.000504095 Jy ! Component: 500 - total flux cleaned = 0.000446847 Jy ! Component: 550 - total flux cleaned = 0.000391305 Jy ! Component: 600 - total flux cleaned = 0.000391135 Jy ! Component: 650 - total flux cleaned = 0.000363548 Jy ! Component: 700 - total flux cleaned = 0.000389387 Jy ! Component: 750 - total flux cleaned = 0.000388701 Jy ! Component: 800 - total flux cleaned = 0.000337296 Jy ! Component: 850 - total flux cleaned = 0.000362656 Jy ! Component: 900 - total flux cleaned = 0.000337935 Jy ! Component: 950 - total flux cleaned = 0.000362489 Jy ! Component: 1000 - total flux cleaned = 0.000387183 Jy ! Component: 1050 - total flux cleaned = 0.000481315 Jy ! Component: 1100 - total flux cleaned = 0.000505071 Jy ! Component: 1150 - total flux cleaned = 0.000459816 Jy ! Component: 1200 - total flux cleaned = 0.000550314 Jy ! Component: 1250 - total flux cleaned = 0.000527981 Jy ! Component: 1300 - total flux cleaned = 0.000549972 Jy ! Component: 1350 - total flux cleaned = 0.000463051 Jy ! Component: 1400 - total flux cleaned = 0.000462915 Jy ! Component: 1450 - total flux cleaned = 0.000462702 Jy ! Component: 1500 - total flux cleaned = 0.000420676 Jy ! Component: 1550 - total flux cleaned = 0.000420519 Jy ! Component: 1600 - total flux cleaned = 0.000380066 Jy ! Component: 1650 - total flux cleaned = 0.000359989 Jy ! Component: 1700 - total flux cleaned = 0.000319992 Jy ! Component: 1750 - total flux cleaned = 0.00029998 Jy ! Component: 1800 - total flux cleaned = 0.000260947 Jy ! Component: 1850 - total flux cleaned = 0.000202877 Jy ! Component: 1900 - total flux cleaned = 0.000241317 Jy ! Component: 1950 - total flux cleaned = 0.000203612 Jy ! Component: 2000 - total flux cleaned = 0.000259725 Jy ! Component: 2050 - total flux cleaned = 0.000222399 Jy ! Component: 2100 - total flux cleaned = 0.000185496 Jy ! Component: 2150 - total flux cleaned = 0.000185696 Jy ! Component: 2200 - total flux cleaned = 0.000185775 Jy ! Component: 2250 - total flux cleaned = 0.000293233 Jy ! Component: 2300 - total flux cleaned = 0.000275165 Jy ! Component: 2350 - total flux cleaned = 0.00022229 Jy ! Component: 2400 - total flux cleaned = 0.000309467 Jy ! Component: 2450 - total flux cleaned = 0.00036127 Jy ! Component: 2500 - total flux cleaned = 0.000344141 Jy ! Component: 2550 - total flux cleaned = 0.000361161 Jy ! Component: 2600 - total flux cleaned = 0.000378123 Jy ! Component: 2650 - total flux cleaned = 0.000461741 Jy ! Component: 2700 - total flux cleaned = 0.000511409 Jy ! Component: 2750 - total flux cleaned = 0.000511253 Jy ! Component: 2800 - total flux cleaned = 0.000560194 Jy ! Component: 2850 - total flux cleaned = 0.000576226 Jy ! Component: 2900 - total flux cleaned = 0.000576324 Jy ! Component: 2950 - total flux cleaned = 0.000608369 Jy ! Component: 3000 - total flux cleaned = 0.000639946 Jy ! Component: 3050 - total flux cleaned = 0.000624298 Jy ! Component: 3100 - total flux cleaned = 0.0006554 Jy ! Component: 3150 - total flux cleaned = 0.000670829 Jy ! Component: 3200 - total flux cleaned = 0.000686279 Jy ! Component: 3250 - total flux cleaned = 0.000716635 Jy ! Component: 3300 - total flux cleaned = 0.000777065 Jy ! Component: 3350 - total flux cleaned = 0.000732173 Jy ! Component: 3400 - total flux cleaned = 0.00076204 Jy ! Component: 3450 - total flux cleaned = 0.00082137 Jy ! Component: 3500 - total flux cleaned = 0.000821299 Jy ! Component: 3550 - total flux cleaned = 0.000821088 Jy ! Component: 3600 - total flux cleaned = 0.000820964 Jy ! Component: 3650 - total flux cleaned = 0.000835462 Jy ! Component: 3700 - total flux cleaned = 0.000806867 Jy ! Component: 3750 - total flux cleaned = 0.000792617 Jy ! Component: 3800 - total flux cleaned = 0.000792595 Jy ! Component: 3850 - total flux cleaned = 0.00077853 Jy ! Component: 3900 - total flux cleaned = 0.000806341 Jy ! Component: 3950 - total flux cleaned = 0.000778748 Jy ! Component: 4000 - total flux cleaned = 0.000778695 Jy ! Component: 4050 - total flux cleaned = 0.000778708 Jy ! Total flux subtracted in 4096 components = 0.000805841 Jy ! Clean residual min=-0.000753 max=0.000748 Jy/beam ! Clean residual mean=0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0755318 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 352 components and 0.0755318 Jy ![Exited script file: muppet] wmap "J0154+0823_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.146 at -5.074 degrees (North through East) ! Clean map min=-0.0013937 max=0.070594 Jy/beam ! Writing clean map to FITS file: J0154+0823_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246206 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04629 1.04629 2.09258 4.18516 8.37032 16.7406 33.4813 66.9626 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.146 at -5.074 degrees (North through East) ! Clean map min=-0.0013937 max=0.070594 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0154+0823_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:43:42 2019