! Started logfile: J0153-1906_S_2017_05_27_pus_uvs.log on Fri May 3 10:54:58 2019 obs J0153-1906_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0153-1906_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.93655 visibilities/baseline/integration-bin. ! Found source: J0153-1906 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0153-1906_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 397 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883357Jy sigma=0.037202 ! Fit after self-cal, rms=0.882246Jy sigma=0.037160 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=6.979 mas, bpa=-1.687 degrees ! Estimated noise=574.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366916 Jy ! Component: 100 - total flux cleaned = 0.0443223 Jy ! Total flux subtracted in 100 components = 0.0443223 Jy ! Clean residual min=-0.011597 max=0.022912 Jy/beam ! Clean residual mean=-0.000052 rms=0.004188 Jy/beam ! Combined flux in latest and established models = 0.0443223 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0443223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139032Jy sigma=0.001566 ! Fit after self-cal, rms=0.138833Jy sigma=0.001564 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=7.576 mas, bpa=-1.066 degrees ! Estimated noise=540.323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306911 Jy ! Component: 100 - total flux cleaned = 0.0493364 Jy ! Component: 150 - total flux cleaned = 0.0628285 Jy ! Component: 200 - total flux cleaned = 0.0726742 Jy ! Total flux subtracted in 200 components = 0.0726742 Jy ! Clean residual min=-0.012359 max=0.024308 Jy/beam ! Clean residual mean=-0.000065 rms=0.003954 Jy/beam ! Combined flux in latest and established models = 0.116997 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.116997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120680Jy sigma=0.001866 ! Fit after self-cal, rms=0.118324Jy sigma=0.001853 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 14.47 FD 0.74 HN 0.87 KP 0.86 ! LA 0.94 MK 0.87 NL 0.76 OV 0.82 ! PT 0.96 SC 0.73 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.71 HN 0.89 KP 0.87 ! LA 0.85 MK 0.75 NL 0.81 OV 0.79 ! PT 0.90 SC 0.69 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.76 HN 0.81 KP 0.85 ! LA 0.85 MK 0.77 NL 0.78 OV 0.72 ! PT 0.88 SC 0.68 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 0.82 KP 1.00* ! LA 0.78 MK 0.80 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.118324Jy sigma=0.001853 ! Fit after self-cal, rms=0.640114Jy sigma=0.000730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.776 mas, bpa=-4.772 degrees ! Estimated noise=669.928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00393078 Jy ! Component: 100 - total flux cleaned = -0.00453597 Jy ! Component: 150 - total flux cleaned = -0.00499468 Jy ! Component: 200 - total flux cleaned = -0.0055318 Jy ! Total flux subtracted in 200 components = -0.0055318 Jy ! Clean residual min=-0.003359 max=0.003466 Jy/beam ! Clean residual mean=-0.000006 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.111465 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.111465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.639223Jy sigma=0.000720 ! Fit after self-cal, rms=0.638905Jy sigma=0.000687 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181162 Jy ! Component: 100 - total flux cleaned = 0.00122322 Jy ! Component: 150 - total flux cleaned = 0.000821278 Jy ! Component: 200 - total flux cleaned = 0.000560388 Jy ! Total flux subtracted in 200 components = 0.000560388 Jy ! Clean residual min=-0.003032 max=0.002749 Jy/beam ! Clean residual mean=-0.000007 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.112025 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 66 components and 0.112025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.638228Jy sigma=0.000684 ! Fit after self-cal, rms=0.638218Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.638218Jy sigma=0.000684 ! Fit after self-cal, rms=1.249320Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=7.867 mas, bpa=-5.212 degrees ! Estimated noise=681.018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218098 Jy ! Component: 100 - total flux cleaned = -0.000766183 Jy ! Component: 150 - total flux cleaned = -0.00100775 Jy ! Component: 200 - total flux cleaned = -0.00123121 Jy ! Total flux subtracted in 200 components = -0.00123121 Jy ! Clean residual min=-0.002839 max=0.002586 Jy/beam ! Clean residual mean=-0.000001 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.110794 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.110794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.248824Jy sigma=0.000673 ! Fit after self-cal, rms=1.248813Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000747728 Jy ! Component: 100 - total flux cleaned = -0.000955643 Jy ! Component: 150 - total flux cleaned = -0.00120545 Jy ! Component: 200 - total flux cleaned = -0.00131993 Jy ! Total flux subtracted in 200 components = -0.00131993 Jy ! Clean residual min=-0.002691 max=0.002546 Jy/beam ! Clean residual mean=-0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.109474 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.109474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.248492Jy sigma=0.000672 ! Fit after self-cal, rms=1.248485Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.248485Jy sigma=0.000672 ! Fit after self-cal, rms=1.378997Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.911 mas, bpa=-5.486 degrees ! Estimated noise=692.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415375 Jy ! Component: 100 - total flux cleaned = 5.17164e-07 Jy ! Component: 150 - total flux cleaned = -0.000307954 Jy ! Component: 200 - total flux cleaned = -0.000421838 Jy ! Total flux subtracted in 200 components = -0.000421838 Jy ! Clean residual min=-0.002683 max=0.002397 Jy/beam ! Clean residual mean=-0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.109052 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 106 components and 0.109052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.378631Jy sigma=0.000671 ! Fit after self-cal, rms=1.378623Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410459 Jy ! Component: 100 - total flux cleaned = -0.000576357 Jy ! Component: 150 - total flux cleaned = -0.000728453 Jy ! Component: 200 - total flux cleaned = -0.000823263 Jy ! Total flux subtracted in 200 components = -0.000823263 Jy ! Clean residual min=-0.002593 max=0.002377 Jy/beam ! Clean residual mean=-0.000003 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.108229 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 114 components and 0.108229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.378395Jy sigma=0.000671 ! Fit after self-cal, rms=1.378389Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.378389Jy sigma=0.000671 ! Fit after self-cal, rms=1.463101Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.315 mas, bmaj=16.4 mas, bpa=-2.743 degrees ! Estimated noise=926.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560895 Jy ! Component: 100 - total flux cleaned = 0.000702152 Jy ! Component: 150 - total flux cleaned = 0.000647255 Jy ! Component: 200 - total flux cleaned = 0.000538316 Jy ! Total flux subtracted in 200 components = 0.000538316 Jy ! Clean residual min=-0.003367 max=0.003388 Jy/beam ! Clean residual mean=-0.000003 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.108767 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 134 components and 0.108767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.462704Jy sigma=0.000671 ! Fit after self-cal, rms=1.462698Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293965 Jy ! Component: 100 - total flux cleaned = -0.000294138 Jy ! Component: 150 - total flux cleaned = -0.00039077 Jy ! Component: 200 - total flux cleaned = -0.000525451 Jy ! Total flux subtracted in 200 components = -0.000525451 Jy ! Clean residual min=-0.003241 max=0.003497 Jy/beam ! Clean residual mean=-0.000004 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.108242 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 144 components and 0.108242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.462497Jy sigma=0.000671 ! Fit after self-cal, rms=1.462496Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=7.939 mas, bpa=-5.664 degrees ! Estimated noise=704.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.027 x 7.939 at -5.664 degrees (North through East) ! Clean map min=-0.0036963 max=0.077947 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=6.983 mas, bpa=-6.524 degrees ! Estimated noise=1053.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0690949 Jy ! Component: 100 - total flux cleaned = 0.0871046 Jy ! Component: 150 - total flux cleaned = 0.0952126 Jy ! Component: 200 - total flux cleaned = 0.0998631 Jy ! Total flux subtracted in 200 components = 0.0998631 Jy ! Clean residual min=-0.003343 max=0.003811 Jy/beam ! Clean residual mean=-0.000011 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.099863 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.099863 Jy ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=7.939 mas, bpa=-5.664 degrees ! Estimated noise=704.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.5, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372636 Jy ! Component: 100 - total flux cleaned = 0.00564117 Jy ! Component: 150 - total flux cleaned = 0.00615167 Jy ! Component: 200 - total flux cleaned = 0.00652626 Jy ! Total flux subtracted in 200 components = 0.00652626 Jy ! Clean residual min=-0.002757 max=0.002521 Jy/beam ! Clean residual mean=-0.000005 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.106389 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 69 components and 0.106389 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.315 mas, bmaj=16.4 mas, bpa=-2.743 degrees ! Estimated noise=926.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847508 Jy ! Component: 100 - total flux cleaned = 0.000845852 Jy ! Component: 150 - total flux cleaned = 0.000775456 Jy ! Component: 200 - total flux cleaned = 0.000712807 Jy ! Total flux subtracted in 200 components = 0.000712807 Jy ! Clean residual min=-0.003913 max=0.003452 Jy/beam ! Clean residual mean=-0.000007 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.107102 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97178e-05 Jy ! Component: 100 - total flux cleaned = -0.000116345 Jy ! Component: 150 - total flux cleaned = -0.000226117 Jy ! Component: 200 - total flux cleaned = -0.000279455 Jy ! Total flux subtracted in 200 components = -0.000279455 Jy ! Clean residual min=-0.003840 max=0.003506 Jy/beam ! Clean residual mean=-0.000007 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.106823 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 107 components and 0.106823 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=7.939 mas, bpa=-5.664 degrees ! Estimated noise=704.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221902 Jy ! Component: 100 - total flux cleaned = -0.000307695 Jy ! Component: 150 - total flux cleaned = -0.000428386 Jy ! Component: 200 - total flux cleaned = -0.000501685 Jy ! Total flux subtracted in 200 components = -0.000501685 Jy ! Clean residual min=-0.002652 max=0.002704 Jy/beam ! Clean residual mean=-0.000004 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.106321 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 122 components and 0.106321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.461412Jy sigma=0.000671 ! Fit after self-cal, rms=1.461396Jy sigma=0.000670 wmodel J0153-1906_S_2017_05_27_pus_map.mod ! Writing 122 model components to file: J0153-1906_S_2017_05_27_pus_map.mod wobs J0153-1906_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0153-1906_S_2017_05_27_pus_uvs.fits wwins J0153-1906_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0153-1906_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307233 Jy ! Component: 100 - total flux cleaned = -0.000243195 Jy ! Component: 150 - total flux cleaned = -0.000885661 Jy ! Component: 200 - total flux cleaned = -0.00146523 Jy ! Component: 250 - total flux cleaned = -0.00187458 Jy ! Component: 300 - total flux cleaned = -0.00219837 Jy ! Component: 350 - total flux cleaned = -0.00244425 Jy ! Component: 400 - total flux cleaned = -0.00268359 Jy ! Component: 450 - total flux cleaned = -0.0028843 Jy ! Component: 500 - total flux cleaned = -0.00308122 Jy ! Component: 550 - total flux cleaned = -0.00330526 Jy ! Component: 600 - total flux cleaned = -0.00339905 Jy ! Component: 650 - total flux cleaned = -0.00346091 Jy ! Component: 700 - total flux cleaned = -0.00343064 Jy ! Component: 750 - total flux cleaned = -0.00349081 Jy ! Component: 800 - total flux cleaned = -0.00343182 Jy ! Component: 850 - total flux cleaned = -0.00346178 Jy ! Component: 900 - total flux cleaned = -0.00351977 Jy ! Component: 950 - total flux cleaned = -0.00340591 Jy ! Component: 1000 - total flux cleaned = -0.00346242 Jy ! Component: 1050 - total flux cleaned = -0.00343453 Jy ! Component: 1100 - total flux cleaned = -0.00332472 Jy ! Component: 1150 - total flux cleaned = -0.00332479 Jy ! Component: 1200 - total flux cleaned = -0.00327072 Jy ! Component: 1250 - total flux cleaned = -0.00329742 Jy ! Component: 1300 - total flux cleaned = -0.00316602 Jy ! Component: 1350 - total flux cleaned = -0.00321843 Jy ! Component: 1400 - total flux cleaned = -0.003115 Jy ! Component: 1450 - total flux cleaned = -0.00301233 Jy ! Component: 1500 - total flux cleaned = -0.00303761 Jy ! Component: 1550 - total flux cleaned = -0.00296189 Jy ! Component: 1600 - total flux cleaned = -0.00291183 Jy ! Component: 1650 - total flux cleaned = -0.00291192 Jy ! Component: 1700 - total flux cleaned = -0.00286276 Jy ! Component: 1750 - total flux cleaned = -0.00286275 Jy ! Component: 1800 - total flux cleaned = -0.0028144 Jy ! Component: 1850 - total flux cleaned = -0.00279037 Jy ! Component: 1900 - total flux cleaned = -0.00276655 Jy ! Component: 1950 - total flux cleaned = -0.00274291 Jy ! Component: 2000 - total flux cleaned = -0.00276633 Jy ! Component: 2050 - total flux cleaned = -0.00267308 Jy ! Component: 2100 - total flux cleaned = -0.00269619 Jy ! Component: 2150 - total flux cleaned = -0.00258111 Jy ! Component: 2200 - total flux cleaned = -0.0025354 Jy ! Component: 2250 - total flux cleaned = -0.00249013 Jy ! Component: 2300 - total flux cleaned = -0.00244482 Jy ! Component: 2350 - total flux cleaned = -0.00244491 Jy ! Component: 2400 - total flux cleaned = -0.00240014 Jy ! Component: 2450 - total flux cleaned = -0.00235559 Jy ! Component: 2500 - total flux cleaned = -0.00224522 Jy ! Component: 2550 - total flux cleaned = -0.00215736 Jy ! Component: 2600 - total flux cleaned = -0.00217918 Jy ! Component: 2650 - total flux cleaned = -0.00211392 Jy ! Component: 2700 - total flux cleaned = -0.00204908 Jy ! Component: 2750 - total flux cleaned = -0.00202763 Jy ! Component: 2800 - total flux cleaned = -0.00198472 Jy ! Component: 2850 - total flux cleaned = -0.00192089 Jy ! Component: 2900 - total flux cleaned = -0.0018786 Jy ! Component: 2950 - total flux cleaned = -0.00187853 Jy ! Component: 3000 - total flux cleaned = -0.00183643 Jy ! Component: 3050 - total flux cleaned = -0.00181545 Jy ! Component: 3100 - total flux cleaned = -0.00179453 Jy ! Component: 3150 - total flux cleaned = -0.00177386 Jy ! Component: 3200 - total flux cleaned = -0.00177389 Jy ! Component: 3250 - total flux cleaned = -0.0017533 Jy ! Component: 3300 - total flux cleaned = -0.00175327 Jy ! Component: 3350 - total flux cleaned = -0.00177367 Jy ! Component: 3400 - total flux cleaned = -0.00173317 Jy ! Component: 3450 - total flux cleaned = -0.00179383 Jy ! Component: 3500 - total flux cleaned = -0.00173329 Jy ! Component: 3550 - total flux cleaned = -0.00175338 Jy ! Component: 3600 - total flux cleaned = -0.00169333 Jy ! Component: 3650 - total flux cleaned = -0.00173324 Jy ! Component: 3700 - total flux cleaned = -0.00171336 Jy ! Component: 3750 - total flux cleaned = -0.00169357 Jy ! Component: 3800 - total flux cleaned = -0.00167384 Jy ! Component: 3850 - total flux cleaned = -0.00163448 Jy ! Component: 3900 - total flux cleaned = -0.00161493 Jy ! Component: 3950 - total flux cleaned = -0.00159541 Jy ! Component: 4000 - total flux cleaned = -0.00155658 Jy ! Component: 4050 - total flux cleaned = -0.00151787 Jy ! Total flux subtracted in 4096 components = -0.00145993 Jy ! Clean residual min=-0.001165 max=0.001220 Jy/beam ! Clean residual mean=0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.104861 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 414 components and 0.104861 Jy ![Exited script file: muppet] wmap "J0153-1906_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.027 x 7.939 at -5.664 degrees (North through East) ! Clean map min=-0.0034773 max=0.086089 Jy/beam ! Writing clean map to FITS file: J0153-1906_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0860891 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000389439 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.3571 1.3571 2.7142 5.4284 10.8568 21.7136 43.4272 86.8545 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.027 x 7.939 at -5.664 degrees (North through East) ! Clean map min=-0.0034773 max=0.086089 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0153-1906_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:55:03 2019