! Started logfile: J0153+7115_X_2017_07_16_pus_uvs.log on Thu May 9 14:00:10 2019 obs J0153+7115_X_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0153+7115_X_2017_07_16_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.693056 visibilities/baseline/integration-bin. ! Found source: J0153+7115 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1200 lines of history. ! ! Reading 41916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0153+7115_X_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897550Jy sigma=0.007292 ! Fit after self-cal, rms=0.887021Jy sigma=0.007213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7919 mas, bmaj=0.8703 mas, bpa=-13.32 degrees ! Estimated noise=848.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850685 Jy ! Component: 100 - total flux cleaned = 0.113941 Jy ! Total flux subtracted in 100 components = 0.113941 Jy ! Clean residual min=-0.004473 max=0.013776 Jy/beam ! Clean residual mean=-0.000015 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.113941 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.113941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088230Jy sigma=0.000694 ! Fit after self-cal, rms=0.088118Jy sigma=0.000693 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145486 Jy ! Component: 100 - total flux cleaned = 0.0218189 Jy ! Total flux subtracted in 100 components = 0.0218189 Jy ! Clean residual min=-0.003945 max=0.009668 Jy/beam ! Clean residual mean=-0.000017 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.13576 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.13576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085278Jy sigma=0.000666 ! Fit after self-cal, rms=0.085231Jy sigma=0.000666 ! Inverting map ! Added new window around map position (-1.2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987563 Jy ! Component: 100 - total flux cleaned = 0.0149679 Jy ! Total flux subtracted in 100 components = 0.0149679 Jy ! Clean residual min=-0.003542 max=0.005158 Jy/beam ! Clean residual mean=-0.000018 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.150728 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.150728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083931Jy sigma=0.000654 ! Fit after self-cal, rms=0.083751Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9877 mas, bmaj=1.042 mas, bpa=-17.97 degrees ! Estimated noise=428.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804462 Jy ! Component: 100 - total flux cleaned = 0.0129079 Jy ! Component: 150 - total flux cleaned = 0.016304 Jy ! Component: 200 - total flux cleaned = 0.0187828 Jy ! Total flux subtracted in 200 components = 0.0187828 Jy ! Clean residual min=-0.002337 max=0.004093 Jy/beam ! Clean residual mean=-0.000042 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.169511 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 46 components and 0.169511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082948Jy sigma=0.000645 ! Fit after self-cal, rms=0.082824Jy sigma=0.000644 ! Inverting map ! Added new window around map position (-4.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435448 Jy ! Component: 100 - total flux cleaned = 0.00721055 Jy ! Component: 150 - total flux cleaned = 0.00930019 Jy ! Component: 200 - total flux cleaned = 0.0108993 Jy ! Total flux subtracted in 200 components = 0.0108993 Jy ! Clean residual min=-0.001753 max=0.001807 Jy/beam ! Clean residual mean=-0.000032 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.18041 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.18041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082563Jy sigma=0.000641 ! Fit after self-cal, rms=0.082519Jy sigma=0.000641 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.97 KP 1.03 ! LA 0.95 MK 0.99 NL 0.99 OV 1.01 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.03 KP 1.07 ! LA 0.96 MK 0.99 NL 0.99 OV 1.01 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.02 KP 0.98 ! LA 0.97 MK 1.01 NL 0.98 OV 1.01 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.04 KP 1.05 ! LA 0.97 MK 0.98 NL 0.97 OV 1.01 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.96 KP 1.04 ! LA 0.96 MK 1.03 NL 0.98 OV 0.98 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 1.03 ! LA 1.00 MK 0.98 NL 0.99 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.99 KP 1.02 ! LA 1.00 MK 0.97 NL 0.99 OV 0.99 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.99 KP 1.04 ! LA 0.95 MK 0.95 NL 1.01 OV 1.02 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.98 KP 1.03 ! LA 0.99 MK 1.01 NL 0.98 OV 1.03 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.02 KP 1.04 ! LA 0.98 MK 1.01 NL 0.99 OV 1.01 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.03 KP 1.01 ! LA 0.97 MK 0.99 NL 0.98 OV 0.99 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 0.96 KP 1.02 ! LA 0.99 MK 0.95 NL 0.97 OV 1.02 ! PT 1.03 SC 1.02 ! ! ! Fit before self-cal, rms=0.082519Jy sigma=0.000641 ! Fit after self-cal, rms=0.082801Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9909 mas, bmaj=1.046 mas, bpa=-19.79 degrees ! Estimated noise=428.613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019944 Jy ! Component: 100 - total flux cleaned = 0.00278227 Jy ! Component: 150 - total flux cleaned = 0.0032851 Jy ! Component: 200 - total flux cleaned = 0.00374703 Jy ! Total flux subtracted in 200 components = 0.00374703 Jy ! Clean residual min=-0.001368 max=0.001585 Jy/beam ! Clean residual mean=-0.000018 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.184157 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 76 components and 0.184157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082739Jy sigma=0.000639 ! Fit after self-cal, rms=0.082749Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082749Jy sigma=0.000639 ! Fit after self-cal, rms=0.082844Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9898 mas, bmaj=1.043 mas, bpa=-17.43 degrees ! Estimated noise=428.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119703 Jy ! Component: 100 - total flux cleaned = 0.00179088 Jy ! Component: 150 - total flux cleaned = 0.00205229 Jy ! Component: 200 - total flux cleaned = 0.00220485 Jy ! Total flux subtracted in 200 components = 0.00220485 Jy ! Clean residual min=-0.001274 max=0.001421 Jy/beam ! Clean residual mean=-0.000011 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.186362 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 0.186362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082820Jy sigma=0.000637 ! Fit after self-cal, rms=0.082836Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420941 Jy ! Component: 100 - total flux cleaned = 0.000568293 Jy ! Component: 150 - total flux cleaned = 0.00067789 Jy ! Component: 200 - total flux cleaned = 0.000776415 Jy ! Total flux subtracted in 200 components = 0.000776415 Jy ! Clean residual min=-0.001239 max=0.001365 Jy/beam ! Clean residual mean=-0.000010 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.187138 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 100 components and 0.187138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082824Jy sigma=0.000637 ! Fit after self-cal, rms=0.082822Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082822Jy sigma=0.000637 ! Fit after self-cal, rms=0.082762Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9884 mas, bmaj=1.042 mas, bpa=-17.33 degrees ! Estimated noise=427.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666869 Jy ! Component: 100 - total flux cleaned = 0.000875316 Jy ! Component: 150 - total flux cleaned = 0.000998528 Jy ! Component: 200 - total flux cleaned = 0.00110959 Jy ! Total flux subtracted in 200 components = 0.00110959 Jy ! Clean residual min=-0.001212 max=0.001337 Jy/beam ! Clean residual mean=-0.000010 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.188248 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 0.188248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082752Jy sigma=0.000637 ! Fit after self-cal, rms=0.082755Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210803 Jy ! Component: 100 - total flux cleaned = 0.000335022 Jy ! Component: 150 - total flux cleaned = 0.000400261 Jy ! Component: 200 - total flux cleaned = 0.000430568 Jy ! Total flux subtracted in 200 components = 0.000430568 Jy ! Clean residual min=-0.001194 max=0.001351 Jy/beam ! Clean residual mean=-0.000010 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.188679 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 110 components and 0.188679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082749Jy sigma=0.000636 ! Fit after self-cal, rms=0.082747Jy sigma=0.000636 ! Inverting map ! Added new window around map position (-16.6, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140325 Jy ! Component: 100 - total flux cleaned = 0.00220015 Jy ! Component: 150 - total flux cleaned = 0.00276291 Jy ! Component: 200 - total flux cleaned = 0.00322621 Jy ! Total flux subtracted in 200 components = 0.00322621 Jy ! Clean residual min=-0.001125 max=0.001142 Jy/beam ! Clean residual mean=-0.000009 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.191905 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.191905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082723Jy sigma=0.000636 ! Fit after self-cal, rms=0.082722Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082722Jy sigma=0.000636 ! Fit after self-cal, rms=0.082659Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.135 mas, bmaj=2.335 mas, bpa=81.08 degrees ! Estimated noise=579.393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113667 Jy ! Component: 100 - total flux cleaned = 0.00187379 Jy ! Component: 150 - total flux cleaned = 0.00230852 Jy ! Component: 200 - total flux cleaned = 0.0026096 Jy ! Total flux subtracted in 200 components = 0.0026096 Jy ! Clean residual min=-0.001516 max=0.001714 Jy/beam ! Clean residual mean=-0.000020 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.194514 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 158 components and 0.194514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082656Jy sigma=0.000636 ! Fit after self-cal, rms=0.082656Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052184 Jy ! Component: 100 - total flux cleaned = 0.00083154 Jy ! Component: 150 - total flux cleaned = 0.00104549 Jy ! Component: 200 - total flux cleaned = 0.00121689 Jy ! Total flux subtracted in 200 components = 0.00121689 Jy ! Clean residual min=-0.001515 max=0.001649 Jy/beam ! Clean residual mean=-0.000018 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.195731 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 172 components and 0.195731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082656Jy sigma=0.000636 ! Fit after self-cal, rms=0.082656Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9876 mas, bmaj=1.042 mas, bpa=-17.41 degrees ! Estimated noise=427.208 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9876 x 1.042 at -17.41 degrees (North through East) ! Clean map min=-0.0010302 max=0.10925 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=0.8719 mas, bpa=-13.32 degrees ! Estimated noise=845.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842979 Jy ! Component: 100 - total flux cleaned = 0.114444 Jy ! Component: 150 - total flux cleaned = 0.131479 Jy ! Component: 200 - total flux cleaned = 0.142314 Jy ! Total flux subtracted in 200 components = 0.142314 Jy ! Clean residual min=-0.003110 max=0.005854 Jy/beam ! Clean residual mean=-0.000014 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.142314 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.142314 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9876 mas, bmaj=1.042 mas, bpa=-17.41 degrees ! Estimated noise=427.208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010973 Jy ! Component: 100 - total flux cleaned = 0.0186748 Jy ! Component: 150 - total flux cleaned = 0.024421 Jy ! Component: 200 - total flux cleaned = 0.0289057 Jy ! Total flux subtracted in 200 components = 0.0289057 Jy ! Clean residual min=-0.001815 max=0.002654 Jy/beam ! Clean residual mean=-0.000022 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.17122 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 60 components and 0.17122 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358434 Jy ! Component: 100 - total flux cleaned = 0.00648776 Jy ! Component: 150 - total flux cleaned = 0.00887053 Jy ! Component: 200 - total flux cleaned = 0.0108948 Jy ! Total flux subtracted in 200 components = 0.0108948 Jy ! Clean residual min=-0.001414 max=0.001509 Jy/beam ! Clean residual mean=-0.000015 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.182115 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 0.182115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.135 mas, bmaj=2.335 mas, bpa=81.08 degrees ! Estimated noise=579.393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339939 Jy ! Component: 100 - total flux cleaned = 0.00575549 Jy ! Component: 150 - total flux cleaned = 0.00750619 Jy ! Component: 200 - total flux cleaned = 0.00885372 Jy ! Total flux subtracted in 200 components = 0.00885372 Jy ! Clean residual min=-0.001731 max=0.001845 Jy/beam ! Clean residual mean=-0.000025 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.190968 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106987 Jy ! Component: 100 - total flux cleaned = 0.00194754 Jy ! Component: 150 - total flux cleaned = 0.00267744 Jy ! Component: 200 - total flux cleaned = 0.00328965 Jy ! Total flux subtracted in 200 components = 0.00328965 Jy ! Clean residual min=-0.001630 max=0.001751 Jy/beam ! Clean residual mean=-0.000019 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.194258 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 154 components and 0.194258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9876 mas, bmaj=1.042 mas, bpa=-17.41 degrees ! Estimated noise=427.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288368 Jy ! Component: 100 - total flux cleaned = 0.000613977 Jy ! Component: 150 - total flux cleaned = 0.000823544 Jy ! Component: 200 - total flux cleaned = 0.000991187 Jy ! Total flux subtracted in 200 components = 0.000991187 Jy ! Clean residual min=-0.001153 max=0.001237 Jy/beam ! Clean residual mean=-0.000007 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.195249 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 0.195249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082666Jy sigma=0.000636 ! Fit after self-cal, rms=0.082653Jy sigma=0.000636 wmodel J0153+7115_X_2017_07_16_pus_map.mod ! Writing 171 model components to file: J0153+7115_X_2017_07_16_pus_map.mod wobs J0153+7115_X_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0153+7115_X_2017_07_16_pus_uvs.fits wwins J0153+7115_X_2017_07_16_pus_map.win ! wwins: Wrote 5 windows to J0153+7115_X_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.24912e-05 Jy ! Component: 100 - total flux cleaned = -4.37631e-05 Jy ! Component: 150 - total flux cleaned = -6.93669e-06 Jy ! Component: 200 - total flux cleaned = -6.60043e-06 Jy ! Component: 250 - total flux cleaned = -4.02687e-05 Jy ! Component: 300 - total flux cleaned = -0.000105063 Jy ! Component: 350 - total flux cleaned = -0.000136513 Jy ! Component: 400 - total flux cleaned = -0.000229174 Jy ! Component: 450 - total flux cleaned = -0.000289495 Jy ! Component: 500 - total flux cleaned = -0.000348561 Jy ! Component: 550 - total flux cleaned = -0.000334307 Jy ! Component: 600 - total flux cleaned = -0.000363297 Jy ! Component: 650 - total flux cleaned = -0.000349473 Jy ! Component: 700 - total flux cleaned = -0.000363418 Jy ! Component: 750 - total flux cleaned = -0.000322824 Jy ! Component: 800 - total flux cleaned = -0.000349866 Jy ! Component: 850 - total flux cleaned = -0.000376267 Jy ! Component: 900 - total flux cleaned = -0.000363199 Jy ! Component: 950 - total flux cleaned = -0.000363162 Jy ! Component: 1000 - total flux cleaned = -0.00036321 Jy ! Component: 1050 - total flux cleaned = -0.000325455 Jy ! Component: 1100 - total flux cleaned = -0.000288615 Jy ! Component: 1150 - total flux cleaned = -0.000300776 Jy ! Component: 1200 - total flux cleaned = -0.000276409 Jy ! Component: 1250 - total flux cleaned = -0.000228817 Jy ! Component: 1300 - total flux cleaned = -0.000240691 Jy ! Component: 1350 - total flux cleaned = -0.000229074 Jy ! Component: 1400 - total flux cleaned = -0.000171497 Jy ! Component: 1450 - total flux cleaned = -0.000182996 Jy ! Component: 1500 - total flux cleaned = -0.000171823 Jy ! Component: 1550 - total flux cleaned = -0.00014949 Jy ! Component: 1600 - total flux cleaned = -0.000127507 Jy ! Component: 1650 - total flux cleaned = -8.37818e-05 Jy ! Component: 1700 - total flux cleaned = -7.29857e-05 Jy ! Component: 1750 - total flux cleaned = -5.16478e-05 Jy ! Component: 1800 - total flux cleaned = -5.16085e-05 Jy ! Component: 1850 - total flux cleaned = -2.00358e-05 Jy ! Component: 1900 - total flux cleaned = 1.12329e-05 Jy ! Component: 1950 - total flux cleaned = 2.14987e-05 Jy ! Component: 2000 - total flux cleaned = 5.21691e-05 Jy ! Total flux subtracted in 2048 components = 6.23276e-05 Jy ! Clean residual min=-0.000609 max=0.000595 Jy/beam ! Clean residual mean=-0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.195312 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 315 components and 0.195312 Jy ![Exited script file: muppet] wmap "J0153+7115_X_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9876 x 1.042 at -17.41 degrees (North through East) ! Clean map min=-0.00088212 max=0.10919 Jy/beam ! Writing clean map to FITS file: J0153+7115_X_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109187 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179797 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.49401 0.49401 0.98802 1.97604 3.95208 7.90416 15.8083 31.6166 63.2333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9876 x 1.042 at -17.41 degrees (North through East) ! Clean map min=-0.00088212 max=0.10919 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0153+7115_X_2017_07_16_pus_uvs.log closed on Thu May 9 14:00:14 2019